Applicatio​n using Http Post... getting error response

Im from Ecuador, and me and other 4 people from the same country are getting this error response when a native java application is trying to make a http post to mydomain.com
The requested URL could not be retrieved:
While trying to process the request:
POST /somedir/more?var1=abc&var2=xyz& HTTP/1.1
Expect: 100-continue
Host: mydomain.com
Content-Length: 40
Content-Type: text/plain; charset=utf-8
Accept: */*
Connection: close
Invalid request. Some aspect of the HTTP Request is nivalid. Possible problems:
Missing or unknwon request method
Missing URL
Missing HTTP Identifier (HTTP/1.0)
Request is too large
Content-Length missing for POST or PUT request
Generated by Blackberry.Internet.Browsing.Service (squd/2.7.STABLE6)
This issue is only happening in my country (Ecuador). I have some friends in Argentina and they have no problems at all. What are the posible causes for this problem?
Message Edited by andufo on 07-09-2009 08:43 PM

Hi again,
im attaching all the info you request:
What does the program actually do?
Social network (because of the TOS of this forum im not allowed to post project names or urls)
What is it trying to send when you submit a request?
What url is it posting the information to? 
Im attaching all this at the end of the post.
Is it the 'exact' same application that works in other countries?
Yeap, the exact same one...
Is it supposed to be useing the Internet Browser?
No, it is a native app. The Browser is not used at all.
Are you on a BlackBerry Enterprise Server? 
Im on BIS, all the users use BIS.
Technical details:
1) The app makes an Http Connection (POST) to:
http://mydomain.com/api/call?param1=abc&param2=xyz
2) This is the Http connection configuration:
httpConnection = (HttpConnection) Connector.open(url);
HttpConnection.POST;
("Content-Type", "text/plain; charset=utf-8");
("Host", 'mydomain.com');
("Content-Length", 100); //depends on sent data
("User-Agent", 'BlackBerry8300... etc');
("Expect", "100-continue");
3) On every country it works fine... on my country i get this error:
The requested URL could not be retrieved while trying to process the request:
POST /app/llamada?param1=abc&param2=xyz& HTTP/1.1
- Expect: 100-continue
- Host: mydomain.com
- Content-Length: 100
- Content-Type: text/plain; charset=utf-8
- Accept: */*
- Connection: close
Invalid request. Some aspect of the HTTP Request is invalid. Possible problems:
- Missing or unknwon request method
- Missing URL
- Missing HTTP Identifier (HTTP/1.0)
- Request is too large
- Content-Length missing for POST or PUT request
Generated by Blackberry.Internet.Browsing.Service (squid/2.7.STABLE6)

Similar Messages

  • How to send te XML data using HTTPS post call & receiving response in ML

    ur present design does the HTTP post for XML data using PL/SQL stored procedure call to a Java program embedded in Oracle database as Oracle Java Stored procedure. The limitation with this is that we are able to do HTTP post; but with HTTPS post; we are not able to achieve because of certificates are not installed on Oracle database.
    we fiond that the certificates need to be installed on Oracle apps server; not on database server. As we have to go ultimately with HTTPS post in Production environment; we are planning to shift this part of program(sending XML through HTTPS post call & receiving response in middle layer-Apps server in this case).
    how i can do this plz give some solution

    If you can make the source app to an HTTP Post to the Oracle XML DB repository, and POST contains a schema based XML document you can use a trigger on the default table to validate the XML that is posted. The return message would need to be managed using a database trigger. You could raise an HTTP error which the source App would trap....

  • How to Invoke service using HTTP POST in BPEL?

    I have a client using .net service with a web page http://.../httpreceive.aspx which is invoke through an http post. How can we post xml message using http post to the url in BPEL. Are there any documentation on doing this? Will this require writing a java class to do an http post the xml message to the url?
    Edited by: sns724 on Feb 12, 2009 11:56 AM

    I created a wsdl with the http-binding to do a HTTP Post and I'm getting a com.collaxa.cube.ws.wsif.providers.http.WSIFOperation_HTTP@1ac9964 : Could not invoke 'process'; nested exception is: java.lang.NullPointerException.
    Here's my wsdl with the binding:
    <definitions name="TestHTTPost" targetNamespace="http://test.com"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:tns="http://test.com"
    xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
    xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
    xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
    xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
    <types>
    <schema attributeFormDefault="qualified" elementFormDefault="qualified"
    targetNamespace="http://hyphen.com"
    xmlns="http://www.w3.org/2001/XMLSchema">
    <element name="AddressBookEntry">
    <complexType>
    <sequence>
    <element name="AddressBookNumber" type="string"/>
    <element name="Name" type="string"/>
    <element name="AddressLine1" type="string"/>
    <element name="AddressLine2" type="string"/>
    <element name="City" type="string"/>
    <element name="State" type="string"/>
    <element name="PostalCode" type="string"/>
    <element name="Phone" type="string"/>
    <element name="Fax" type="string"/>
    <element name="Email" type="string"/>
    <element name="ElectDest" type="string"/>
    </sequence>
    </complexType>
    </element>
    <element name="PostMessageResult">
    <complexType>
    <sequence>
    <element name="Result" type="string"/>
    <element name="Errors">
    <complexType>
    <sequence>
    <element name="Error">
    <complexType>
    <sequence>
    <element name="ErrorDescription" type="string"/>
    <element name="ErrorSource" type="string"/>
    </sequence>
    </complexType>
    </element>
    </sequence>
    </complexType>
    </element>
    </sequence>
    </complexType>
    </element>
    </schema>
    </types>
    <message name="HTTPPostServiceRequestMessage">
    <part name="payload" element="tns:AddressBookEntry"/>
    </message>
    <message name="HTTPPostServiceResponseMessage">
    <part name="payload" element="tns:PostMessageResult"/>
    </message>
    <portType name="HTTPPostService">
    <operation name="process">
    <input message="tns:HTTPPostServiceRequestMessage" />
    <output message="tns:HTTPPostServiceResponseMessage"/>
    </operation>
    </portType>
    <binding name="HTTPPost" type="tns:HTTPPostService">
    <http:binding verb="POST"/>
    <operation name="process">
    <http:operation location="/httpreceive.aspx"/>
    <input>
    <mime:mimeXml part="payload"/>
    <mime:content type="text/xml"/>
    </input>
    <output>
    <mime:mimeXml part="payload"/>
    <mime:content type="text/xml"/>
    </output>
    </operation>
    </binding>
    <service name="HTTPPostService">
    <port name="HTTPPost" binding="tns:HTTPPost">
    <http:address location="https://testxml.solutions.com"/>
    </port>
    </service>
    <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    PARTNER LINK TYPE DEFINITION
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
    <plnk:partnerLinkType name="HTTPPostService">
    <plnk:role name="HTTPPostServiceProvider">
    <plnk:portType name="tns:HTTPPostService"/>
    </plnk:role>
    </plnk:partnerLinkType>
    </definitions>

  • Webmethods and XI using HTTPS POST

    hi,
    i have an idoc->xi-cXML scenario.
    when i do a https post to the vendor(runs on webmethods) they don't get the cxml but they can receive our namespace, interface, msg guid etc but not the cXML document itself.
    I did transmit the same cXML to other vendors where they said they have received it and i got a confirmed 200 success message too.
    now this leaves me wondering why this other vendor is not receiving it.
    From xi i did everything - increase the trace levels to see the message and i see that the cxml message going out but i don't understand why they are not receiving it.
    Any ideas how to troubleshoot this issue?
    Is there anything wrong on XI end?
    One more thing when i talked to the vendor-tech guy himself he thinks the way XI sends the cXML using HTTP POST might cause the cXML document for not receiving at other end?
    Any help would greatly be appreciated.
    Thanks,
    Tirumal

    chen -
    Can you elobarate on what you suggested.?
    Where can i check for the tcp gateway attached with note "soap faq"?
    Appreciate for your response.
    Thanks,
    Tirumal

  • File upload using http-post in OSB

    Hi All,
    I am trying to upload a file using http-post method in OSB.
    I have created a business service pointing to the service url, with http method post.
    and calling this business service from a proxy service.
    I am unable to send the form data to the business service.
    Please let me know how to send trhe form data and the file information.
    The error given by Business Service is-
    the request doesn't contain a multipart/form-data or multipart/mixed stream, content type header is text/plain
    Thanks in advance.
    Seemant
    Edited by: Seemant Srivastava on Oct 12, 2010 12:28 PM

    Hi Anuj,
    A sample HTML form code for. Post HTTP service-
    <html>
    <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> <title>CSV File</title>
    </head>
    <body>
    <form method="post" enctype="multipart/form-data" action="http://xyz/UploadFile">
    <table>
    <tr>
    <td> Feed id </td>
    <td><input type="text" name="refid" value="" size="20"></td>
    </tr>
    <tr>
    <td> Username (optional)</td>
    <td><input type="text" name="username" value="" size="20"></td>
    </tr>
    <tr>
    <td> Password (optional)</td>
    <td><input type="password" name="password" value="" size="20"></td>
    </tr>
    <tr><td> Select CSV File </td>
    <td> <input type="file" name="upload" value="" width="30"/></td>
    </tr>
    <tr>
    <td><input type="submit" name="Ok" value="Go"> <input type="reset" name="reset" value="Reset"> </td>
    </tr>
    </table>
    </form>
    </body>
    </html>
    I need to pass all these information to OSB business service.

  • HTTP-Post/Get method of calling the query service allows us to build URL

    Hi,
    I am new to webservices.i have requirement that, using a HTTP-Post/Get method of calling the query service that allows us to build an URL and if we call that url it wil populate XML object.i need query LDAP server for getting users manager details ,in request query we wil pass user details.thanks in advance..

    check same issue in java forum and this link:
    http://jakarta.apache.org/commons/httpclient/methods/post.html

  • Loading applet using http-post

    Hi,
    I am trying to load applet using http-post and I can not figure out how can I get http post form parameters in applet. Can sombody please help me with this?
    thanks
    Kamal

    Hi Arun
    actully i m doing all these stuff .
    but still i m not being able to load .
    do u have any code which can simplify this?
    if u have plz send it at [email protected]
    and also thanx for reply dear .

  • Invokation of Oracle J2eeWeb Services using HTTP POST

    I have created Oracle J2ee web service from a Java Class in Oracle Jdeveoper 10g. I want to invoke web methods in the web service using HTTP POST method. Currently, these web methods can be invoked using HTTP GET method which is the default option. Please suggest any solution for this.
    bye

    Vivek,
    If you want to make a call to Web Services from .NET, you have to generate a client proxy in your language of choice: C#, VB.NET, J#, ...
    There are two ways of doing so. a) from the command line using a tool named WSDL.EXE. b) from Visual Studio 2003 using the 'Add Web Reference' command.
    In either case, you will have to point to the WSDL of your service to generate the client proxy. The URL for the WSDL is the same as the URL for the service, with the ?WSDL parameter.
    Hope this helps,
    Eric

  • How can I use HTTP POST?

    Dear,
    I need to take a test using the object http post for calling a webservice developed in. Net.
    I have the following information from the webservice. Net:
    POST /Level3Communication.asmx HTTP/1.1
    Host: 10.110.70.129
    Content-Type: text/xml; charset=utf-8
    Content-Length: length
    SOAPAction: "http://tempuri.org/ReceiveMessageFromMES"
    How do I fit this information in HTTP POST object?
    What should I fill in the URL field?
    What should I fill in the Document to Post field?
    What should I fill in the PostData field?
    how do I declare the soap action using http post?
    I did not find any example.
    Could you help me?
    Regards,
    Sérgio Salomã

    Hi,
    check the blogs..
    for recieving..
    [Receiving E-Mail and processing it with ABAP - Version 610 and Higher]
    for Sending
    [Sending E-Mail from ABAP - Version 610 and Higher - BCS Interface]
    Regards,
    Sathish Reddy.

  • View HTTP POST/GET request in CSS

    Hi Guys,
    i am facing an issue where my Appls is receiving more post request then what
    had been sent by the client.
    It was reported that Appls log 3 http post but client only submitted one request.
    To troubleshoot, does the CSS has the ablility to view HTTP POST/GET traces? Is there a history
    for such traces logged?
    Thanks

    You'll need a sniffer trace. Frontend and backend.
    The CSS does not have log for this info or ways to show you the HTTP requests.
    G.

  • Upload an XML created in JDE to a website which uses HTTP POST, through BSS

    Hi
    My requirement is : in JD Edwards Enterpriseone XML file will be generated and kept in a folder. I need to upload that XML file to a website which uses HTTP POST? Is it possible to do this using BSSV? How? Please provide inputs immediately.
    Thanks
    TK

    Yes, you could use BSSV for that. As I understand your post, you have an XML file, you just need to POST it. You would write a C BSFN that calls a BSSV, then in the Java code for that BSSV you would use Java capabilities to read the contents of the XML file and POST it. Look at B953002 - it calls the C API jdeCallBusinessService which makes the call out to the BSSV. The Service Consumer samples are a lot more complex than you need - you really just need to build up an XML string that matches the input value object of your BSSV and then call the C API.
    If you also need to create the XML file, then you could also do that quite easily in the BSSV java code.
    Of course all of this could also be implemented in a C BSFN or with Real Time Events and then some middleware to create and POST the XML file ... customers tend to choose the technology where they have the most familiarity and skill.
    --Steve                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Example of sending the po request to my partner using https post method

    I need to send the po request to my partner using https post method.
    Is there any example for my scenario in oracle b2b?
    Usecase:
    mycompany
    othercompany
    mycompany -> Posts xml document with no namespace -> othercompany
    Protocol: https

    I need to send the po request to my partner using https post method.It is possible. FYI, by default HTTPS uses post method.
    Is there any example for my scenario in oracle b2b?Not exact sample is available but yes, similar samples are available here -
    http://www.oracle.com/technology/sample_code/products/b2b/index.html
    I would suggest you to go through below tutorial to have better understanding -
    http://www.oracle.com/technology/products/soa/b2b/collateral/B2B_TU003_ebxml.pdf
    Namespace is not an issue. It's upto you whether you like to keep it or not. From XML technology point of view, it is always recommended to have a namespace to bind each and every node with it, but I have seem cases where people don't use them.
    Regards,
    Anuj

  • WSRM Adapter replaced with soap in PO7.4. Getting error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error"

    Hello All,
    We have scenario proxy->pi->webservice. In older versions of PI system they used wsrm adapter at receiver side and it's working fine.
    Receiver interface is asynchronous. So no response structute is present and receiver service is business component(since receiver is a third party).
    During migration, we have replaced the receiver adapter with SOAP adapter and used message protocol as SOAP 1.1 but the message is failing and in communication channel it is showing error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error". In this case the receiver interface is stateless xi 3.0 compatible(re using the old), after changing it to just stateless also issue persists.
    In target url field if i prefix the url with "http" then above mentioned error is occurring otherwise if i use the hostname:port/path.. then it is giving error
    "soap: Call failed: com.sap.aii.af.sdk.xi.srt.BubbleException: Unsupported protocol". So maintaing the url as http://hostname:port/pat.....
    As in old channel wsrm channel there is no userid and password, i haven't given any userid/pwd in receiver channel.
    used the bean sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean with  parameters
    Module Key  =  soap
      Parameter Name  =  noSOAPMakeSysErrFromResponseFault
    Parameter Value  =  false
    and
    xmbws.No SOAPIgnoreStatus = true
    but not successful.
    Please help me. I got stcuk here.

    Hello Jannus,
    The connectivity is working fine. Network team has confirmed it. I doubt that any strucutre(header) difference might be present in message when sending with wsrm adapter compared to sending with soap adapter.
    Please let me know the exact difference between soap and wsrm functionality in receiving end.
    By considering the structure issue, i have checked the "do not use soap envelope" check box, then i got error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type"
    Then i used message transform bean, but not successful.
    Regards,
    Ch.Venkat.

  • Binding Fault when using http-POST

    Hi all,
    i have again a binding fault in my process. When i use a http-GET binding for the invoked webservice, the process works well. But when i use a POST-binding instead of the GET in the service-wsdl i get the following binding fault:
    <bindingFault>
    <part name="summary" >
    <summary>[email protected]9 : Could not invoke 'WFS_GetCapOP'; nested exception is: java.io.IOException: Content-Type `UTF-8;charset=ISO-8859-1' is not a text type</summary>
    </part>
    <part name="detail" >
    <detail>java.io.IOException: Content-Type `UTF-8;charset=ISO-8859-1' is not a text type</detail>
    </part>
    </bindingFault>
    Does anyone know, where the problem may be? Here's the wsdl:
    <?xml version="1.0" encoding="UTF-8"?>
    <wsdl:definitions xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:aw="http://www.example.org/WFS_gesamt/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://www.example.org/WFS_gesamt/" name="WFS_gesamt">
         <wsdl:types>
              <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" targetNamespace="http://www.example.org/WFS_gesamt/">
                   <xsd:element name="GetCapOut" nillable="true" type="xsd:anyType"/>
              </xsd:schema>
         </wsdl:types>
         <wsdl:message name="GetCapabilitiesOut">
              <wsdl:part name="GetCapabilities_response" element="aw:GetCapOut"/>
         </wsdl:message>
         <wsdl:message name="GetCapabilitiesIn">
              <wsdl:part name="request" type="xsd:string"/>
         </wsdl:message>
         <wsdl:portType name="GetCapabilitiesPT">
              <wsdl:operation name="WFS_GetCapOP">
                   <wsdl:input message="aw:GetCapabilitiesIn"/>
                   <wsdl:output message="aw:GetCapabilitiesOut"/>
              </wsdl:operation>
         </wsdl:portType>
         <wsdl:binding name="HTTPPostGetCap_Binding" type="aw:GetCapabilitiesPT">
              <http:binding verb="POST"/>
              <wsdl:operation name="WFS_GetCapOP">
                   <http:operation location="/geoserver/wfs"/>
                   <wsdl:input>
                        <http:urlEncoded/>
                   </wsdl:input>
                   <wsdl:output>
                        <mime:mimeXml part="GetCapabilities_response"/>
                   </wsdl:output>
              </wsdl:operation>
         </wsdl:binding>
         <wsdl:service name="WfsService">
              <wsdl:port name="GetCapabilitiesPT" binding="aw:HTTPPostGetCap_Binding">
                   <http:address location="http://localhost:8080"/>
              </wsdl:port>
         </wsdl:service>
    </wsdl:definitions>
    rg.
    Alli

    well the error msg is correct ..
    i would expect content type to be something like text/xml ....
    can you trace the message that is generated ..
    thank you.
    clemens

  • How  to communicate with a remote application that uses http post to request connection

    Ok, I will try to make this simple as to avoid any
    confusion.
    I am trying to receive connection requests from remote applications installed on user pc's.
    The application uses POST method to send the request to connect to my database, and if required update some tables.
    The application is not a webpage. I have no access to the internal workings of the application nor do I have any specific information about how it sends its POST. I am sure of the following:
    The app will POST to my .cfm page
    "IsConnectionAllowed" = "yes"
    This is asking my cfm page if its ok to connect. I would need to use a <cfif> to verify the the first part of the POST is in fact
    "IsConnectionAllowed" = "yes"
    If this returns true, (the app also uses to POST to pass "username" and "password") my .cfm page will then perform a query and check the username and password against the database. If a matching record is found, the application expects my page to reply with
    "#Answer# OK- connected;"
    Once the answer is given the application will then respond with data to insert or update my tables.
    Now, I know how to do the queries and update tables etc, but I have never received data from an application before.
    I tried using the <cfform> tag with a mehod of GET, and then trying to send my reply with <cfoutput>, but that didn't work. The application doesn't give any feedback or error messages. It either connects or not.
    I also tried the <cfhttp> tag, but that didnt work either. I am not very experinced with coldfusion. I used it years ago and am just getting back into it.
    I am sure this is a pretty easy thing to do, but my methods arent working.
    Using the above information, can somone please show me how I would accomplish this communication? I can then use the same method to retrieve the data for my table updates and queries.
    Here is a sample of what I have already tried:
    <cfform method="get">
    <cfif>
    "IsConnectionAllowed" = "yes"
    <!-- I need to query a username or password. But for testing I will just give the OK to connect -->
    <cfoutput>#Answer# Ok - connected;</cfoutput>
    <cfelse>
    <!-- When I query username and password, if the query returns no records I deny the connection -->
    <cfoutput>#Answer# Not connected;</cfoutput>
    </cfif>
    </cfform>
    BTW, I have examples of this being done using .php and .asp. I need to do this using .cfm. I can post the either the .php or.asp code if it will be helpful in converting the function into a .cfm page.

    Thanks Fernis.
    That code allowed me to connect!
    I have an error on the remote application, but I think thats due to the fact that I commented out the database connection and query strings. As I am mostly concerned with connection at this point, I just wanted to test that my cfm page will recognise the POST request and send the right answer, In this case
    ##Answer## Ok - connected;
    That worked perfectly and the application received the ok to connect.
    I can now use your code as a base to carry on with my database connection and update query.
    I can't thank you enough. I wouldnt have figured that out in a million years of trial and error.
    I knew it was simple though. I was over thinking it.
    I do have one last question though... In the code you presented you have
    <cfif structKeyExists(Form,"isConnectionAllowed") AND form.isConnectionAllowed EQ "yes">
    Can you you explain this    structKeyExists(Form,"isConnectionAllowed")
    I have never seen this before. Why the Form followed by a comma? I am guessing you are asking if there is an element in the POST called "isConnectionAllowed". Is that correct?  If so, do I not need to do that for each POST'ed element such as username, password, and each of the other fields that will be updated in the session?

Maybe you are looking for

  • Problem regarding the signup page

    i am making a signup page using servlets Firstly there is a html page which accepts UserId , Password , RE-type password, security question and answer then secondly i made a servlet name as NewServlet which dispatches the page it is as shows * NewSer

  • View stage boundaries | select objects in multiple frames/layers

    I've got 2 things where I've typed every query I can think of into Google  and can't find an answer. In both cases I'm sure there's a simple answer that  I'm missing. #1 When I add a graphic or picture that's larger than the stage, the stage is  hidd

  • Is there a way to add a new field to the MD15 layout

    Hello, I wanted to add new fields to the MD15 layout list. For example "Vendor ID and Old Material #" Is there a way to do that? Thanks

  • 'Currency' as a segment in Chart of Accounts

    Hi all, Please pardon me for posting such a long mail :) If you could help me address these concerns, we would really appreciate it. This is regarding Financial Accounting Hub implementation for an Investment Company. There is a requirement (details

  • How can I print black ink only when in automatic two-sided mode for Officejet 6500?

    When I set the printer to automatically print on two sides, it only allows color or high quality grayscale as print color options.  If I print on only one side, then I have a third option for black ink only.  Does anyone know how to get black ink onl