Application 11i will include Financial ( GL, AR, AP, SO, PO, INV)

Hi,
Can I find Financial( GL, AR, AP, SO, PO, INV)After install application 11i? Or I need to install ERP CD?

The best place to find about APIs is to view the database where there are all stored, under the APPS schema. I find that with a little time spent investigation I usually find what I'm looking for.

Similar Messages

How to start and shutdown Oracle Applications 11i?

Currently, I've installed an Oracle Applications version 11i under Sun Solaris environment. However, I encountered problems when I tried to backup the whole system for fallback purpose. I'm not really sure about the procedures in shutting down the Oracle Applications components. So, is there anyone could tell me such procedures, hopefully including the command used for shutting down the whole application system? Thanks.
Besides, I would like to know how can I start Oracle Applications 11i as a daemon? If cannot, how can I start the server within the UNIX shell? Thank you very much.

You will have specified a common directory in your installation, which is usually referred to as COMMON_TOP.
Under <COMMON_TOP>/admin/scripts there are a host of shell scripts for stopping, starting apps components. Also, under the database Oracle Home (816 or 817) you will find an appsutil directory with similar scripts.
Typically these two directories will be in your PATH.
You can create a stop script, typically as:
adfrmctl.sh stop
adrepctl.sh stop
adfmsctl.sh stop
adfmcctl.sh stop
adapcctl.sh stop
adcmctl.sh apps/apps_password stop (wait till FND processes cease, a sleep 300 might suffice)
adalnctl.sh APPS_<SID> stop
addlnctl.sh <SID> stop
addbctl.sh stop
A start script would call the same scripts in the reverse order, substituting stop for start.

Application 11i Installation Problems

I just bought the trial version application 11i CD pack. When I tried to install it to my computer with NT4.0 service pack 6, it did system check. I used stage area rapid install. The installer find 2 errors.
First error is 'System Utilities Check Check system for make,
ld,ar and cc'
Second error is 'JDK availability Check Check that a JDK exists
in the location supplied by the user'
My questions are:
1.When I check the error for detail, the first one tells me that
'Check MKS Installation'. What's MKS though? and what's make,ld,
ar and cc? Where can I get them and how to install them?
2.Where can I get JDK?
3.When I look up installation guide, I found that I need go to Metalink to get to know how to download and install JDk. But when I go to Metalink, It ask me to signin. I am not Oracle Contactor. I have no CSI. Is it mean I can not get JDK when I am not contractor? If so, why Oracle is selling application 11i trial version CD packs. It's gonna be some way to install 11i trial version.
Is there any one could help?
Thank you very much
Timothy Park 04/03/02

Hi all,
I ran into the same issues with the MKS software - Developers Edition. I contacted them, and the following work-around was supplied.
We have created a work around for Oracle users so that they can still use
MKS Toolkit for Developers (instead of the more costly option- Toolkit for
Professional Developers).
You can do what you need to with tkdev using 1 of the following:
1) Find out from what scripts the Oracle software is calling ld, and change
it to call cc instead. Some linker specific options may need to be changed,
but try it first with just changing ld to cc. This is the preferred option,
and the one most likely to provide success.
2) Temporarily create ld.exe as follows:
a) cp $ROOTDIR/mksnt/cc.exe $ROOTDIR/mksnt/ld.exe
b) cp $ROOTDIR/etc/compiler.ccg $ROOTDIR/etc/ld.ccg
This will probably work as long as the command line that Oracle is passing
to ld is very simple. This usage of cc.exe (by copying to ld.exe) has been
observed to work in simple cases, but is not supported by MKS.
I tried method 2. The reason here being, I would rather have unsupported code from MKS, than Oracle.
But, alas, it did not work. This is now the only item I have to resolve to start the installation.
I am open to suggestion ? I have obtained the enterprise edition of MKS, but I would still like to get the thing working with the developers edition. Also, if there are any differences between Windows 2000, and XP, can you list them
WARNING : I am using a server with Windows 2000 professional. Microsoft's latest updates include
service pack 3.
DO NOT INSTALL SERVICE PACK 3
or you will receive an invalid Operating System error

How do I build an application that will run without being installed?

I have seen some of the prior posts on trying to do this, but most of them were older, so I'll ask:
Using 7.1, how do I build an application that will run without having to install the runtime engine? I have a client that wants to run serial port monitoring VIs to watch some custom hardware we built for him. His IT dept. won't let him install anything. If I could make this VI run off of a USB thumb drive without needing anything installed on the system it would be ideal. Space is not a problem, so I could include any runtime files needed. Can anyone tell me how to do this?
Thanks

Under what operating system was it running under back in the 90's when it was working?
I think that starting with NT platforms (applies to 2000 and XP, but not 9x) the hardware abstraction layer (HAL) prevented direct I/O to serial ports. Serial port related code that ran fine on 3.x and 9x would not run under NT platforms without modification.
Just some food for thought, do not know if it applies to your situation.
Good Luck
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Help needed in installing oracle applications 11i in Linux

Hi every one . i m trying to install oracle applications 11i suite in Linux machine.. but i am getting error in the following way
Error in File System
Error - Unable to create directory with proper privileges:
Database ORACLE_HOME
Mount Point = /d02/oracle/proddb/9.0.2
and it continues for all the directories which application is trying to create..
And also Error in File Space Check
Error - Not enough free disk space on system :
Database ORACLE_HOME = /d02/oracle/proddb/9.2.0
required = 2905.0
available = 0.0
I have some 140 GB free space in my disk... Please help me out... thankx in advance

Nothing changed .. its shows the same error...
i will explain my scenario... i have a dump of Oracle suite in Hard Drive.
assigned value to LD_ASSUME_KERNEL
Creater Users. group
created directories oracle & apps
and given permissions... to the directories...
Its showing the same error again and again... plz help out

Upgrading Oracle XML Parser for Java v9.0.4 with Oracle Applications 11i

Guys, I applied ATG.PF.H.RUP4. In postinstall steps it is mentioned,Upgrading Oracle XML Parser for Java v9.0.4 with Oracle Applications 11i(doc-271148.1)
which says after applying patch 4038964 do the following--
AUTOCONFIG ENABLED APPLICATIONS ENVIRONMENT
If the Oracle E-Business Suite configuration files are maintained using the AutoConfig infrastructure, proceed with the following:
1. Run the AutoConfig utility.
2. Go to [JAVA_TOP].
3. Run the unzip -l appsborg2.zip | grep 9.0.4 command. If there is a file named as .xdkjava_version_9.0.4.0.0_production, which indicates that XML Parser for Java v9.0.4 is installed correctly as part of appsborg2.zip. Otherwise, run ADAdmin to regenerate the appsborg2.zip file.
4. Restart the application tier server processes such that the new version of Oracle XML Parser for Java will take effect.
but actually the patch is already applied- 4038964. How do i verify if i need to do these steps or not.
The xmlparserv2-904.zip file is already there in wrapper.classpath. of jserv.properties, forms.properties. So i think i dont need to do these steps.

unzip -l appsborg2.zip | grep 9.0.4
0 04-18-03 20:10 .xdkjava_version_9.0.4.0.0_production
do i still need to do that step?No, you do not have to since "XML Parser for Java v9.0.4" is already installed as part of appsborg2.zip

Oracle Applications 11i Release 4 CD Pack for MS Windows

I am about to buy Oracle Applications 11i Release 4 CD Pack for
MS Windows 2000 for my personal training use, What I want to know
is the requirements;
- CPU PENTIUM III
- size of hard drive gb
- certified against 9i or 8i(8.1.7)
- what is the difference from product version appluications
11i and applications 11i cd packs
- posibilities to be install on single machine three tier

download all the files in to common directory named "stage".Unzip teh same ,it will create the required structure.
Regards,
alit
ww.alsuminfotech.com

Oracle Applications 11i Load Balancing does not work with RAC one Node

Hi all,
Could you help me to resolve this issue.
Architecture environment is :
- One APPS tier node
- Two nodes Oracle Database Appliance (Primary node 1 holds INSTANCE_1 et Secondary node is configurured to holds INSTANCE_2), i.e RAC one Node.
- The primary node have instance_name SIGM_1 and the secondary node have instance_name SIGM_2, but in RAC one node, the secondary instance is not alive.
We convert our EBS 11i environment to RAC following note ID Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i [ID 823586.1].
When testing Database failover, Oracle Applications 11i load balancing does not work anymore.
The root cause is that, when the primary node of the Rac one node is down, the INSTANCE_NAME_1 is automaically relocating to the surviving node,.
During test failover, we imagine that when the primary node goes down, the secondary node start or relocate database with instance_name SIGM_2, and in that case the Oracle Applications load balancing works.
Currently, when the primary node goes down, the instance_name SIGM_1 is relocated on the secondary node, which cause failure of Oracle Applications Load Balancing.
Thank you for your advice.
Moussa

This is something I observed a long time ago for Safari (ie: around version 1). I'm not sure this is Safari, per se, but OpenSSL that is responsible for the behavior. I'm pretty sure Chrome does this and I've seen some Linux browsers do it.
What I have done at the last two companies I've worked for is recommend that our clients do not use SSL SessionID as the way of tracking sticky sessions on web servers, but instead using IP address. This works in nearly all cases and has few downsides. The other solution is to use some sort of session sharing on your web servers to mitigate the issue (which also means that your web servers aren't a point of failure for your users' sessions). (One of the products I supported had no session information stored on the web servers, so we could safely round-robin requests, the other product could be implemented with a Session State Server... but in most cases we just used IP address to load balance with). The other solution is to configure your load balancer to terminate the SSL tunnel. You get some other benefits from this, such as allowing your load balancer to reduce the number of actual connections to the web servers. I've seen many devices setup this way.
One thing to consider through this is that - due to the way internet standards work - this really can't be termed a bug on anyone's part. There is no guarantee in the SSL/TLS standards that a client will return the same SSL Session ID for each request and there is not requirement that subsequent requests will even use the same tunnel. Remember, HTTP is a stateless protocol. Each request is considered a new request by the web server and everything else is just trickery to try and get it to work the way you want. You can be annoyed at Safari's behavior, but it's been this way for over 5 years by my count, so I don't expect it to change.

Problem Installing Oracle Applications 11i on

Gurus.. Please help...
I am trying to install oracle applications 11i on Windows XP Professional and for some reason the process is getting stuck at :
Step 3 of 5
Command: c:\oracle\proddb\9.2.0\temp\PROD\adrundb.cmd
g Performing database characterset conversion adsvdcnv.cmd
I have tried several times and everytime it is getting stuck at this stage only.
I am installing in language English only... and selected most of the options defaulted by the system.
The system doesnot give any error message but get stuck at this point for hours. Couldn't figure out the problem... Please throw in some ideas... Thanks in advnance...

Check the install log, this will tell you what happened with the file that was having problems. If you want to email the log to me i will have a look. But a lot of people have the same problem with this file so it's easy to fix.
[email protected]

My application manager will not open

I can log into my creative cloud account, but cannot download After effects. Also my application manager will not open on my desktop.

Ricardo Oyarzabal do you receive any specific error messages when you try to open the Creative Cloud Desktop application? In addition if you are unable to open the Creative Cloud Desktop application how are you initiating the download and installation process for After Effects? Please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for information on how to install the Adobe Creative applications included with your membership.

I am having problem downloading application on Mac app store, when I try to login and start downloading the application, it will say "Your device cannot be verified"

I am having problem downloading application on Mac app store, when I try to login and start downloading the application, it will say "Your device cannot be verified"

Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Log out, log back in, and test. If there's no improvement, continue.
Step 2
Reset your computer’s PRAM.

Have any evaluation copy of Oracle Application 11i for download?

As subject, is Oracle Application 11i evaluation copy available? & where to download?
Chris

You will have to place an order with oracle and they will send you the copy of the latest erp software.. they may charge shipping and handling.. if this is for your personal evaluation.. it for the company.. it may be free.
or you can go to metalink.oracle.com if you are a registered user... or store.oracle.com
cheers

Failure Oracle Applications 11i

We have the problem when running Oracle Applications 11i. The Message error :FRM:92090 an unexpected error ouccured
How to solve this problem ? What causing this problem ?

I grabed this from metalink note 178050.1. I haven't had to deal with this personally, so I can't say this is everything.
# Recommended Fix
For mass deployment and simplicity upgrade to Jinitiator to 1.1.8.16 to fix this problem
95% of all pure Pentium 4 issues can be resolved by simply upgrading Jinitiator to 1.1.8.16 (patch 2127667). This places the correct version of symcjit.dll (3.10.0.107) on the client.
If Jinitiator is ever uninstalled due then this method will not require the end user to reame the .dll file since it will be seeded correctly.
Beware that at the time of this article, 1.1.8.16 is the highest version of Jinitiator certified with the applications. This is why it is the recommend patch. There are other jinitiators that will have the correct .dll but they encounter memory leaks. The only known problem with going Jinitiator 1.1.8.16 is left-handed mouse buttons do not function properly. There is a workaround listed in bug 2008854 for this, so it should not prevent users from going to 1.1.8.16.

Installing Oracle Application 11i

Urgent, I need information on How to install oracle application 11i : Sizing, architecture, documentation.
All documentation will be useful.
Thanks to all,

Urgent, I need information on How to install oracle application 11i : Sizing, architecture, documentation.
All documentation will be useful.
Thanks to all,

Help needed from Oracle form 6i developer and oracle applications 11i

I am looking for an Oracle Technical ebusiness suite SCM freelancer with solid experience and strong knowledge of oracle forms 6i.
Role will be to develop a new simple form and integrating this developed custom form with oracle standard form in Oracle applications 11i
More details will be provided later on and ready to negotiate the price for this project..............
It should not take more than 10 days to complete this project. Interested candidate should let me know asap.
Edited by: user8725114 on Aug 17, 2009 8:18 PM

Hi,
Try the built-in procedure WEB.SHOW_DOCUMENT. See some examples in the on-line help of Forms.
You can call this built-in procedure in a Form level trigger , called 'KEY-HELP' (when the user presses the <Ctrl>+<H> buttons) , or if you have a button on the form use the trigger 'WHEN-BUTTON-PRESSED'.
Hope the above will help you...
Simon

Application 11i will include Financial ( GL, AR, AP, SO, PO, INV)

Similar Messages

Maybe you are looking for