Application activations de-activating on Bootcamp/PD partition!

Hi all i have bootcamp partitions on all the macs here and they all also have Parallels PD installed so you can either use one or the other (as a virtual or as a bootcamp). BUT i have noticed that using the machine one way and then using the other will cause applications to deactivate (I think). For example, after I installed Adobe CS3 for Windows in BC and then tried to run it in Parallels, I had to do a repair activation. Also, other apps seem to do the same thing, like Macdrive. No big deal, but I am afraid that someday I will be using a laptop, have no access to the internet, and not have all my media and media serials with me on the road. Is this a known problem, or just me?
I also might be causing this problem with my backup practices. I use Winclone to keep a back up of the entire partition...if something get's wonkie, I just go back in time by overwriting the partition using winclone (I sure wish apple would address this Time Machine, I don't see why I need two backup programs because I have two operating systems).
Well, thanks for any insight!
coocoo

that's a good idea. but in my case i teach PC classes and it's just too strange for students to see the mac version (they are all using PCs) so when i teach or demo I usually show bootcamp. but we have all the mac licenses and adobe was not very forthcoming when we did want to go from CS3 PC to CS3 Mac. Maybe they have changed, dunno. And then there is the fiasco where some programs in CS3 are PC only, like Ultra, which i use alot, only it does not work in Parallels anyway. I am so fed up with adobe products at the moment, this is just one more irritant. for example, we just flushed lightroom for aperture. cheers!

Similar Messages

"error occurred setting the server application active"

Hi All,
I found following error when I save outline in ASO application. It seems that the application cannot be started correctly. Other applications (BSO/ASO) are running correctly.
"error occurred setting the server application active"

try this:
Issue can be from both server and application side:
1)Addition of SERVERTHREADS with a proper value. When any database operation is requested then monitor the number of process, memory etc. Idea is to identify which process is trying to use max resource on server level.
2) Also, if possible try and increase the ulimit setting to "unlimited".
3) Verify NETDELAY and NETRETRYCOUNT -- Guess you have checked this so values should be fine here.
4) If the environment is windows then:
a)Open the Registry
b)Navigate to Local Machine\System\CurrentControlSet\Services\TCPIP\Parameters
c)Add new DWORD Value named TcpTimedWaitDelay, right click and select Modify. Select decimal radio button, type in 30. (The default value of this parameter is 2 minutes. This is how long it will take for a TCP/IP port that was used by the network for a connection to be released and made available again. 30 sec is the minimum allowed by Microsoft)
d)Add new DWORD Value named MaxUserPort, right click and select Modify. Select decimal radio button, type in 65534. (The default value is 5000. This determines the highest port number TCP can assign when an application requests an available user port from the system).
e)Add new DWORD Value named MaxFreeTcbs, right click and select Modify. Select decimal radio button, type in 6250. (The default value is 2000. This determines the number of TCP control blocks (TCBs) the system creates to support active connections. Because each connection requires a control block, this value determines how many active connections TCP can support simultaneously. If all control blocks are used and more connection requests arrive, TCP can prematurely release connections in the TIME_WAIT state in order to free a control block for a new connection).
f) Reboot the server.
5) On application side, look at the cache settings, If they are very high then try lowering them and check.
Cheers!!
HA:-)
Edited by: user9513506 on Sep 2, 2008 5:03 AM

The application Activity Monitor quit unexpectedly

Activity Monitor refuses to startup since installing Leopard on this MacBook. Everything else seems to be working properly.
A search didn't turn up anyone else having this problem... anyone have a clue?
Thanks

I also have the same problem. I follow the instructions above, however the problem persists.
Here is my system log:
[0x0-0x3d03d].com.apple.ActivityMonitor[358]: dyld: lazy symbol binding failed: Symbol not found: __commpagedsmos
[0x0-0x3d03d].com.apple.ActivityMonitor[358]: Referenced from: /Applications/Activity Monitor.app/Contents/MacOS/Activity Monitor
[0x0-0x3d03d].com.apple.ActivityMonitor[358]: Expected in: /usr/lib/libSystem.B.dylib
[0x0-0x3d03d].com.apple.ActivityMonitor[358]: dyld: Symbol not found: __commpagedsmos
ReportCrash[360]: Formulating crash report for process Activity Monitor[358]
([0x0-0x3d03d].com.apple.ActivityMonitor[358]): Exited abnormally: Trace/BPT trap
Here is the detailed crash log:
Process: Activity Monitor [358]
Path: /Applications/Activity Monitor.app/Contents/MacOS/Activity Monitor
Identifier: com.apple.ActivityMonitor
Version: 1.5.3 (58)
Build Info: ActivityMonitor-580000~1
Code Type: X86 (Native)
Parent Process: launchd [132]
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: __commpagedsmos
Referenced from: /Applications/Activity Monitor.app/Contents/MacOS/Activity Monitor
Expected in: /usr/lib/libSystem.B.dylib

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I ha

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Can't install Windows 8.1 because the Bootcamp Assistant-partitioned disk is GBT and not MBR.

I can’t install Windows 8.1 because the Bootcamp Assistant-partitioned disk is GBT and not MBR, and attempting to format the bootcamp disk does nothing. I have read up on this issue, and the only solution seems to be to make a backup of my computer and reformat all disks via 8.1 setup terminal. I REALLY do not want to do that, is there any way to fix this? I’m on OS X Yosemite, if that pertains to the thread.

Interesting. It wouldn’t install because I had FileVault enabled. Huh. Disabling it saved the day.

HT3986 In using bootcamp to partition and install Windows on my computer, the partition step stops and sends me a message that "files cannot be moved" so partitioning is incomplete. I am stuck. Please help.

In using bootcamp to partition and install Windows on my computer, I keep hitting a snag. Message says that partitioning can not be completed because files can not be moved. I have tried several things but nothing seems to be helping to move the process along. What should I do?

Welcome to the Apple Support Communities
In most of the cases, that message appears when there's a problem with the filesystem, so you have to repair the disk. This doesn't mean that the hard drive is damaged.
First of all, open  > About this Mac, and check Version. If it's 10.5 or 10.6, insert the Mac OS X DVD of the version you are using and press C key while your Mac is starting. If it's 10.7 or 10.8, press Command and R keys while your Mac is starting. After doing this:
1. Go to Utilities menu > Disk Utility (if you have 10.5 or 10.6) or open Disk Utility (10.7 and 10.8).
2. Choose Macintosh HD in the sidebar and repair the disk.
3. Restart, open Boot Camp Assistant and follow the steps to install Windows on the Mac

PLZ helpppppppppppppppppppppppp want to roll back "active" of the recovery partition...

Hi,
I need serious help,,,,,,any help is appreciated :
--- I believed my second hard drive is burnt , but it was not ( not able to access it, it was because i had changed the workgroup in NTFS),
--- at this stage my windows 7 would boot normally , but like a new user, no access to previous files
--- so tried to do restore,    F11 showed there were no previous saving for restore
--- tried to do recovery , F11 showed that "restore" botton is gray/ inactive
--- someone on internet suggested to make the recovery partition , "active", so i did it through disk management
--- then when windows boot up, it went directly to previous recovery page with inactive botton,, i can not access my previous windows , i can not boot up to windows again
--- so now it boots up and goes to useless recovery page
--- through bios activated "HP Quick web" , and playing with photo viewer in quickweb i noticed all my files on the "maybe burnt drive" are all there!!!!    and i can view them,,,,,,,   ooops!!! my whole problem was changing windows group!!
---   so if i can just boot to previous windows , then i can change the group and access the files...but
--- now i cant go out of recovery page,,,,, now that it is "active partition" everytime i turn on computer is JUST goes to recovery page screen (which is inactive),,,,,,,,,,,,,,,,,,,,,,,,,,
--- how can i roll back, or inactive the recovery partition and use my drive "C" previous partition as the only active one
I dont have recovery CD (I will get it tomorrow, i ordered it by HP, 30 bucks! phewww),,,,,,,,,
i am panicked any help would be deeply appreciated.........................................................
HP Pavillion DV-7 4069
Windows 7 Home Premium

Hi,
If you don't already have one, use another PC to create a Windows 7 Recovery CD. Download the relevant ISO from the links below.
Windows 7 32bit
Windows 7 64bit
You should use an application such as ImgBurn to burn the ISO to a CD. Once created, or if you already have this, insert the CD and restart to boot from it. Select the Repair option.
Select the 'Repair your Computer' option and follow Option 2 in the guide on the link below to run Start-up Repair – you may need to run this 2 or 3 times.
http://www.sevenforums.com/tutorials/668-system-recovery-options.html
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Virtual Application: Activation Office 2013

Hello All,
We have created virtual office application as directed in Office Deployment method. In Config.xml we gave "ProPlusVolume" we got out final .appv file
We need to deploy this virtual application to all our clients. We are having a tough time in getting this done.
How do we activate this virtual application?
Some blogs say MAK and KMS cannot be used for Virtual application, it is supported only for Non-Virtual application
is this right? or using KMS we could achieve?
How activation for Office 2013 applications can be achieved using VLSC?
Any help would be greatly appreciated
Thanks!

Hello,
If you are using KMS / AD-based activation I would guess it would detect it automatically.
If using MAK - see the option to use ospp.vbs
http://technet.microsoft.com/en-us/library/dn385359(v=office.15).aspx
I haven't tried the above options, but it would be the most obvious chocies.
Nicke Källén | The Knack| Twitter:
@Znackattack

Error while creating activities from Account application (Activity tab page

Hi Experts,
We are using CRM 5.0 with PCUI ( EP 7.0 version). We are getting below error when try to create activities from Account application in PCUI ( from activity tab page):
Error : Activity contains error.
Diagnosis
This transaction has errors.
Procedure
To correct the errors, go to the maintenance interface of the transaction.
To navigate to there, use the link to the account application
Pls suggest how to proceed with this error & helpful solutions would be rewrded generously.
Regards,
Basavaraj Patil

Hi Experts,
We are getting this error when try to create Activity from Account application in PCUI. But the same thing is working fine in at GUI level & actions profile assigned to Activity transaction is also working fine at GUI level. But in PCUIit is throwing this below error.
Diagnosis
You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
System Response
The follow-up transaction is not created.
Procedure
Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
Pls suggest solution for this.
Thanks in Advance.
Regards,
Basavaraj Patil

Detecting application activation in taskbar

Hi,
I am positing in this forum after receiving no response in the swing forum.
I currently have a swing application to which I want to add "detect file updated by external program" functionality. I already have the code that does this but I have currently added it to the internalFrameActivated method. But I want to popup the message automatically when the user activates the application from the taskbar. The way it works now is after activating, the user has to click on one of the open internalframes to select it at which point the message pops up.
Addind it to WindowActivated causes the message to popup on every key press or mouse movement. I only want it to popup once. Can somebody tell me how this can be achieved.
Any help is appreciated.
Cheers,
Omprakash.V

Yes, if you write this in the Constructor block.
However, I can not setResized my jframe.
public jframe()
super("Title Test");
this.setUndecorated(true);
this.setResizable(true);
initComponents();
I don't think that both of them can co-exist together.What is your opinion? I am looking around for another classes.I will let you know if I found something...

IPAD memory utilisation - applications active ?

Someone can help me, I cannot understand why some applications are indicated as active when I switch on my new IPAD.
1. I Switch on my Ipad (new Ipad - IOS 6.0.1
2. I open app System SYS-Lite
3 Applications indicated as active
   - Manager
    - Mail
    - Phone (no indication of that application on my IPAD)
   - Camera
    - App Store
It sounds strange to me, I did'nt open any application...and take care everytim to close everything completely.
Is that normal ?
Thanks for your help.

Thanks for your answer. Could you tell me what is that phone application running? I took an Ipad with only wifi adapter...

Trace application activity in Database side

Hi all
We are using Oracle database 11g (Release 11.1.0.6.0 - 64bit Production) for database and a billing system for client application. Every end of month we are running bill calculation from the front end of our billing system.
The thing i want to do is to know or to get step by step each transaction executed by the Billing application when we launch the bill calculation and bill generation task from the application.
Someone does knows how to proceed on that.
I want to know thwe tables and procedures or function used by the Bill system engine for tuning purpose.
The Os is Linux red hat 5.
Thank you.
Lucienot.

Use TRACE/TKPROF (with wait events) to trace the session that runs the bill calculation.
You might need some help from your DBA.
See:
http://www.oracle-base.com/articles/10g/sql-trace-10046-trcsess-and-tkprof-10g.php
http://docs.oracle.com/cd/E11882_01/server.112/e16638/sqltrace.htm#PFGRF01010
http://docs.oracle.com/cd/E11882_01/server.112/e16638/sqltrace.htm#PFGRF01020

Is there any methods like application activated and application de-actived in windows app 8.1

Hi,
Is there any events such as on application loaded and application closed in windows store app 8.1
Thanks,
Alok

Please see the application lifecycle page:
https://msdn.microsoft.com/en-us/library/windows/apps/hh464925.aspx
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

SRM Oss Note Application - Activating Changes in Screens

Hello all,
I implemented oss note 1079525 at web dynpro for SRM 7.0 . I made changes at screens and codes according to the sap note.
But when i test my screens from explorer, i cant see the changes that i have done on screen. For example i added a field in selection screen but i cant see it on my SRM page.
I activate screens but do i have to publish it also?
Anyone has ideas or has done this before?
Thanks.

I hope you have done the below part from SAP Note and moved your changes to test client.
Meta data changes to be done in client 100(Customizing client)
Add a new entry in the view(sm30) /SAPSRM/V_MDF_HD with the following entries
Structure Field Name - CO_CODE
Bus. Object Type - BUS2201
Field Visible - X (YES)
Field Enabled - (NO)
Field Required- (NO)
***********Save the changes. Make sure that these changes are available in testing client before testing.

Bootcamp OSX partition keeps corrupting

I have a client that I have set up a Bootcamp system for with Mountain Lion/Win7. This is a mid 2011 MB Pro 13", Core 2duo, 8GB RAM, 720 GB HD. I set it up for him and the first night switching from Windows to OSX with the "option" key method at restart. When selecting the OSX partition it started to boot then shut down. I worked on the phone several hours with him and couldn't figure it out.
I picked up the MB Pro and reinstalled Mountain Lion and got it working again. One week has passed and he just let me know that OSX will not boot again.
What could be the issue here? HD failure is my first thought? Any ideas would be most helpful. Thanks in advance!

It could be a drive hardware failure, or it could be other factors. If the user is using the standard Windows 7 backup software, they could be corrupting their own MacOS partition by performing a test backup/restore. If you or they have loaded drivers to give them write access to their HFS+ partitions, they could be doing many different things to corrupt the partition. Using any windows based partitioning tools or drive maintenance tool might also be corrupting the drive. There are a very few windows based tools which actively support working with Mac HFS+ volumes, so using anything other than those could be the source of corruption.

Application activations de-activating on Bootcamp/PD partition!

Similar Messages

Maybe you are looking for