Application Alias not working with Global Single Sig on

I have a intranet applications, with login against https://login.oracle.com that is working fine. However, when I try to use the Application Alias, defined on Applications Attributes, it's not working, redirecting to an invalid page:
https://htmldb.oraclecorp.com/pls/htmldb/-PORTAL_SSO-
How can I make this work, I mean, using alias, instead of applications number?
Thanks in advance,
Andre Silveira

Andre,
Assuming your application's ID is 9999 and its alias is AAAA, you may be finding that a request like f?p=9999 and f?p=AAAA produce the same results, those you described. When using SSO as the authentication scheme, it's necessary to provide the page ID or page alias in the URL also, e.g, f?p=AAAA:PPPP or f?p=AAAA:1.
Scott

Similar Messages

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

Mail application will not work with latest version mac 4.5

mail application will not work with latest version mac 4.5

You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

Application is not working with mouse

Dear All,
We have a strange issue in the our application (Oracle form) in the one of our client machine.
Some times the forms are not able to work with the mouse but is able to work with the keyboard. After one or two machine restart its again working. When the issue occur we can able to work in other applications using mouse.
Our Applications server is in Other country and client are accessing from India.
This occurs for some user and not for all.
Application server Version 10.1.2.0.2.
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit
Java Plug-in version 1.6.0_31 .
Please any info will help us lot.

Thank you for the quick replies Michael Ferrante and HamidHelal.
But since its occurring for some users (perticulary indian users) and some times. And also its occurring in production environment not in development environment.
Even the java control panel is not working with mouse.
For other country customers everything working fine.
So its difficult for me to apply the patch with these uncertainties.
Checking with fresh java installation and let you know the status.
Thanks.

MY WHATSAPP HAUTELOOK FACEBOOK APPLICATIONS ARE NOT WORKING WITH THE NEW UPDATE iOS 7 ITS DRIVING ME CRAZY! HOW CAN I FIX IT?

I DOWNLOADED THE NEW UPDATED VERSION FOR THE IPHONE !!!
AND MY APPLICATIONS ARE NOT WORKING AT ALL
WHENEVER I ENTER TO WHATSAPP A MESSAGE POPS UP FROM NOWHERE SAYING SOMETHING ABOOUT PUSH UP NOTIFICATION!!
AND THAT I SHOULD CONNECT IT TO ITUNES, THEN I CONNECT IT TO ITUNES AND ITUNES IS NOT LETTING ME SIGN IN WITH MY APPLE ID ITUNES IS NOT WORKING/!!!
ALSO WHENEVER I OPEN HAUTELOOK APP ON THE IPHONE IS FREEZING MY PHONE WITH THE PUSH UP NOTIFICATION WINDOW, AND I CLICK OK AND IT STILL APPEARS OVER AND OVER AGAIN
PLZ HELP ME!!!!!!!!!!!!!!!!!!!!!

If you do not have enough space, then you would have to free up more space.
You can also update via itunes on your computer.

IMessage not working with one single contact

My iPhone has stopped sending iMessages to one singular contact. Before today we have been using iMessage to communicate regularly. This is the only contact that iMessage does to not work with on my phone and on his he can iMessage me but I don't receive these messages. Also in group chats we can no longer communicate due to this issue.

Did anyone fix this problem?
This just happened to me yesterday! I have iOS 7.1, had no issues until yesterday!
I can iMessage my iMessage friends on my iPad with no problem, but the iPhone 5 randomlly decided yesterday that it would only iMessage selective people!
I've tried everthing I can find so far.

Application installer not working with PC Suit App...

I have a Nokia E60 and Windows XP SP2. After installing PC Suite 6.82.96.4 I try to open the App. installer but it opens and closes inmediately (blinks) but do not work. I try to do the installation through the File manager, and I can see and open the Nokia browser, phone memory etc, but whenever I try to install, the following message is shown Nokia Application Installer has encountered a problem and needs to close. We are sorry for the inconvenience. Detail is: Error signature AppName: applicationinstaller.exe AppVer: 6.82.96.4 ModName: unknown ModVer: 0.0.0.0 Offset: 90909090 It also shows that there is an error report that I cannot find C:\DOCUME~1\rodrigm3\LOCALS~1\Temp\9e61_appcompat.txt Could you please help me to fix the problem? thanks a lot

Regarding my problem, I attach the log file generated in the error report in case it can help to the Nokia support (or anybody able to help...) It should have to be a PC config problem, as I am totally able to install application with the same version of PC Suite in other colleagues PCs Thanks for your support....
Attachments:
42cb_appcompat.txt ‏63 KB

Alias Not working with iOS4

I have a MobileMe account with multiple aliases, I was told and read that I would be able to send from my mobileme alias with iOS4, however, I do not have the "FROM" option when composing an email. Anyone have any idea why this new feature is not working for me.
Yes, I have all my info filled out under my aliases in settings.
Thanks in advance

This wasn't working for me as well... at first.
I read a response (in some other thread) indicating that I needed to fill out all of the fields for each alias, and the main account, in the web email's Preferences screen. So I did that -- and still nothing. This sounds like where you are right now, eh?
While puzzling this out, on my phone, I experimentally switched my default email account to a different one... and then back to my mobileme account. When I went back to Mail... after waiting a few moments for a spinning wheel to go away... I opened a new email and discovered my aliases were now there. I don't know, frankly, if I fixed it... or if I just stalled long enough for it to start working on its own... but it's now working.
... sort of ...
Only the .mac form of my aliases are listed (which is goofy, but workable).
I went back to settings, to see if I could now change my default email account to be one of the aliases... no dice on that either. Oh well... we're getting closer.

Application services not working with MS Word 2004

for some reason, application services with MS Word 2004 no longer work with Leopard for me (all grayed out). I would appreciate any advice
thanks,
bill

Bill
Because Word 2004 doesn't support Services. Firefox is another app that doesn't.
Regards
TD

HudTube application is not work with Youtube

As on the advertised the HudTube program can work easy with Youtube. It said just copy and paste the url then it will work. But after I did that the message appear to not support with the youtube ! Why is that ? What wrong with my MacBook or do I need to do anything else? Please help me because I spent the money for it to work with Youtube.

Hey Pummirin,
Please make sure that you have the latest version of HUDTube and if you do and it still doesn't work, contact us via support form here: http://hudtu.be/#support and we will solve your problem.
Best,
-Zbigniew, Macoscope Sp. z.o.o.

Load balancing across multiple application servers not working with JCo RFC

We have a problem where inbound messages to the Mapping Runtime engine (ABAP -> J2EE) are not load balanced over application servers. However, load balancing does take place across server nodes within one application server.
Our system comprises of the following:
Central Instance (2 X server nodes)
Database Instance
2 X Dialog Instances (with 2 X server nodes each)
The 1st application server that starts is usually the one that is used for inbound messaging.
We have looked at the sap gateway configuration and have tried various options without much luck:
i.e.: local gateways vs. one central gateway, load balancing type by changing parameter gw/reg_lb_level, see: http://help.sap.com/saphelp_nw70/helpdata/EN/bb/9f12f24b9b11d189750000e8322d00/frameset.htm
Here are our release levels:
SAP_ABA     700     0012     SAPKA70012
SAP_BASIS     700     0012     SAPKB70012
PI_BASIS     2005_1_700     0012     SAPKIPYJ7C
ST-PI     2005_1_700     0005     SAPKITLQI5
SAP_BW     700     0013     SAPKW70013
ST-A/PI     01J_BCO700     0000          -
Any help would be greatly appreciated.
Many thanks

Tim
Did you follow the guide here:
How to Scale Up SAP Exchange Infrastructure 3.0
Learn what the most likely scaled system architecture looks like, and read about a step by step procedure to install additional dialog instances. The guide also walks you through additional configuration steps and the application of Support Package Stacks.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c3d9d710-0d01-0010-7486-9a51ab92b927
We followed this guide for XI3.0 and PI7.0 and works successfully!

IPod Remote application does not work with Ethernet

I can control iTunes on my MacMini from the Remote application on my iPod Touch only if the Mini is connected to the router by WiFi, but not if it connected by Ethernet cable. Unfortunately, I need to connect the MacMini to the router by Ethernet (because of another problem), but this is preventing me using the Remote application.
The wireless access point is an Airport Express connected to the router by Ethernet cable. The iPod Touch communicates with the Airport Express.
The Remote application cannot find my iTunes music library. However it can connect to the MacMini using "ssh". When I select "Add Library" on the remote, the iPod does not show up in iTunes on the Mini. I have tried turning off the firewall in the MacMini but this does not help. However, if I connect the MacMini by WiFi instead of Ethernet cable, it works fine.
My router has a firewall between the Internet and the LAN, but not between the LAN ports. I also cannot see any settings on the Airport Express that might block this connection.
Any help would be appreciated.

similar (unresolved?) issue here https://discussions.apple.com/message/9480306#9480306

Downloading Applications will NOT work with my iPad 2 at ALL

I can get on the Internet and anything, but I cannot download applications although I can look at applications via "App Store". What can I do?

This form is for technical help with the iPod Classic, not the iPad. Post this in the iPad forums.
https://discussions.apple.com/community/ipad
B-rock

JAVA APPLICATION DOES NOT WORK WITH TMG

Dear all,
I'm not able to log into a JAVA APP or a Website using Java (.jsp) pages.
We can open either the windows application and the webpage, but we can't log in.
I'm using Forefront TMG 2010 as a my corporate firewall and all clients are using Windows 8.1.
I've tried everyting I'm able to try.
Could you please help me?
Best Regards
Clemilson
Clemilson Correia IT Specialist

Hi,
Thank you for your post here.
Firstly we need you to collect
TMG live logging.
As you mentioned, you can normally get website but cannot login in, so I think there may be something wrong with the HTTP post method. You may need to capture the packets to see what happened.
You can use
Network Monitor 3.4.
Best Regards
Quan Gu

Application developed using JDK1.2.2 not working with JRE1.3

I am supporting and application developed using JDK1.2.2, it uses JDBC drivers from oracle(classes12.zip) to connect to an Oracle 8i database. This application is not working with JRE1.3. Can someone suggest any possible methods to make it work with JRE1.3?
Thanks in advance,
Anoop.

well, Now the problem is partly solved. I was having problems in displaying a frame(derived from JInternalFrame), later I discovered that for JRE1.3, I have to explicitly set the setVisible option to true.
I have a few more frames to correct. I hope after that it wil be alright..
Thanks for the quick response.
Anoop.

Application Alias not working with Global Single Sig on

Similar Messages

Maybe you are looking for