Application area and Message no Significance

Dear Friends,
When error msg comes and if I go and see the technical info it gives application area and msg no....how to make use of that?.......how to see the information the msg contains?.......

Hi
use tcode se91
put application area in message class
and the message no in the mesaages noumber field
Anurag

Similar Messages

How to find message type by using message number and application area

Hi abapers,
I know the message number and application area , how to find messagwe type.
i.e weather it is error message or warning message.
MESSAGE NUMBER IS :219.
APLLICATION AREA IS : FS.
in which table i had to check.
i checked in t100 table , but i am unable to find message type.
please help me to solve this.
regards

hi,
go to se91
enter area and message number.
then click on display.
then go to utilities tab >> where used list or press shift + ctrl +f3
there list of program will show .
choose your program name
then u will get ur mesage infoemation by double click on ur program name
thanks
sachin

No Categorization Schema assigned to application Area

Hi Friends,
I am getting following error message while creating a BP Contact persom from IC WebClient.
"No Categorization Schema assigned to application Area(BUS_ACTIVITY, SUBJECT_PROFILE, ACT000001)"
The BP's are getting created, but the message appears once we try to identify the account.
I think I am missing some configuration.
Can you pls help me on this ?
Thanks and warm regards
Purnendu

Hi Maiti ,
Category modeler provides you four fields in the order type you wish to see it these fileds can be used as per your requirements and you can set a logical drop down say if A is selected in the first field then what should appear in the second & so on .
To activate
1.Add the CRM BSP application CRMM_ERM_CAT
2.Launch the category modeler
3.Select the advanced search and then go
4.Create new schema
5.keep the status in general tab as draft,go to application area and select the service ticket(where you want to see it).Go to categories tab
6.Here you create a sub note say product
7.create a subnote to this which will appear in the next field when product is selected in the first....and so on.
Now once the logical seq is set ,go to general tab and set the status to released.It takes 24 hours for the schema to be active .Once it is active you can see the fields in your application area

I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.

I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.

Use the Finder "Go" menu while holding down the option key to expose your User / Library folder.
Look in the Application Support folder for PACE items and delete them.

I upgraded my Mac from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2. I did have Microsoft Office for Mac 2004 in my applications and now get a message "can't open Office because Power PC applications are no longer supported."

I just upgraded my MAC from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2. When I try to access my Microsoft Office for MAC (2004 edition) files I am getting a message "can't open Office because Power PC applications are no longer supported. How can I access all of my save Word documents? I just want to be able to retrieve all of my documents that were in Microsoft Office for Mac (2004). If I purchase the newest version of MS office for Mac from Apple will I be able to retrieve my old documents?

Use any number of free alternatives to your nearly decade old version of MS Office.
Consider
LibreOffice (donation-supported)
NeoOffice (free)
OpenOffice (free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft.

At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs

At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs every time I open Firefox. How can I stop or disable this?
== This happened ==
Every time Firefox opened
== Several weeks ago.

See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the ''updates'' and ''updates\0'' folder:
Vista/Windows7:
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\ (updates)
C:\Users\<user>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox\ (updates)
%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates\

I tried to open Photoshop Elements 11. I got a message that components of the application are missing and that I needed to reinstall Photoshop Elements. I purchased the software by downloading it from Adobe so how can I reinstall it?

I tried to open Photoshop Elements 11. I got a message that components of the application are missing and that I needed to reinstall Photoshop Elements. I purchased the software by downloading it from Adobe so how can I reinstall it?

Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

New MacPro 10.9.4 included Keynote. Worked fine. An update was released August 21. Just downloaded the 6.2.2 update and now get error message "You can't open the application because PowerPC applications are no longer supported". Any ideas?

New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?

I tested this:
Reinstalled Aperture 3.1 from the Trial Installer.
In some way it seems to be working. But the whole thing is a scary Chimera.
It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
But the Media Browser does not show the aperture Library that I created.
The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder. Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
When opening the chimera Aperture, I see plenty of warnings in the Console window:
An Aperture "Hang" report
xpcproxy assertion failed
com.apple.IconServiceAgent: main failed to composite image
quicklookd: Warning
and more ... the hang was critical. I had to force quit Aperture more than once.
So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your precious photos.

I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
1. Revert back to Snow Leopard.
2. Purchase FCP X...
if you can't stand FCP X
3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
I just got FCS 3 today through apple phone sales..

As of today, I can no longer or Excel. I get this message: You can't open the application "Microsoft Excel" because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted 2x

As of today, I can no longer or Excel. I get this message: You can’t open the application “Microsoft Excel” because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted twice and that hasn't worked.

The application may be corrupt. Un-install and re-install Office.
Office 2011 Removal
Office 2011 Removal (2)

HT1444 Hi, I just tried to open Word and this message appeared - 'You can't open the application Microsoft Word because PowerPC applications are no longer supported.' I just recently loaded OS X Lion does this mean my software for MS Office is now out of

Hi, I just tried to open Word and this message appeared - 'You can't open the application Microsoft Word because PowerPC applications are no longer supported.' I just recently loaded OS X Lion does this mean my software for MS Office is now out of date? Do I have to purchase a new package? Any help appreciated.

Hello:
Office 2004 was written for the PowerPC chip only. There is no emulation in OS X 10.7.
I encountered the same issue sometime ago when I updated to OS X 10.7.
There is one option that I might mention (other than buy Office 2011). I switched to Apple's iWork. Pages (the word processing package) is completely compatible with Word. If you export Pages documents, you can export them in formats compatible with Microsoft programs. iWork also contains programs that are compatible with Office presentation and spreadsheet packages.
The reason I mention this is that the cost is about 1/2 of the cost of Office.
Barry

I am trying to restore my mac osx 10.7.4 from an ext lacie harddrive and getting message "u can't open the application lacie backup support because power pc application are no longer supported"

i am trying to restore my mac osx 10.7.4 from an ext lacie harddrive and getting message "u can't open the application lacie backup support because power pc application are no longer supported"

Use any number of free alternatives to your nearly decade old version of MS Office.
Consider
LibreOffice (donation-supported)
NeoOffice (free)
OpenOffice (free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft.

When I try and open a word document I received the following message: "You cant open the application Microsoft Word because PoerPC applications are no longer supported". What is up with that?

When I try and open a word document I received the following message: "You cant open the application Microsoft Word because PoerPC applications are no longer supported". What is up with that?

Here is a post that I assembled for a similar question:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

I have installed Lion and Microsoft Office 2011. I want to uninstall Office 2004, but of course I cannot run the application to uninstall, because I get the "PowerPC applications are no longer supported" message. Suggestions?

I have installed Lion and Microsoft Office 2011. I want to uninstall Office 2004, but of course I cannot run the application to uninstall, because I get the "PowerPC applications are no longer supported" message. Suggestions?

Go to this microsoft site http://support.microsoft.com/kb/312172 and/or this microsoft site http://support.microsoft.com/kb/2398768. I would suggest removing both to start with a clean slate. I had some problems with installing Office for Mac 2011 over 2008 and found out that by completely removing both and starting from a clean slate provided the best solution. Kappy is correct but some sniglets do get left behind. Hope this helps. Cheers.

Montan Lion "kick out" My usb memory sticks, external Hard drive, external DVD /cd drive and give me an error message "PowerPC applications are no longer supported."

Montan Lion "kick out" My usb memory sticks, external Hard drives, external DVD /cd drive and give me an error message "PowerPC applications are no longer supported."

It does not matter what I plug in to the USB post, the results is the same ...
U use external hard drives, memory sticks (new and my old memory sticks), I also use an external cd / dvd writer LG Portable Super Multy Drive
They all run for ± 1 min then it loose contact and I get error messages like, error code -8062 or PowerPC applications are no longer supported..... etc

Application area and Message no Significance

Similar Messages

Maybe you are looking for