Application based on JMF does not load the complete Video

Hi folks!
I programmed a small application using the JMF. Among other things, this application should load an play video files. But it does not load big video files completly.
One of my video files (MJPG, 720x576, FrameRate=25.0, Length=999424 28 extra bytes) is 10 minutes long and is pretty huge. It takes 2,1 gigabyte disk space.
My application loads and plays only 5 minutes of this video. But the VLC media player, windows media player and other video player does play the complete video.
However, the JMStudio has the same problem.
Any ideas?
I'm looking forward to your replies!

It's taken quite a long time for me to get a resolution. I have a feeling each situation is unique. I tried many of the solutions offered both in this forum and in other ones found online, including Flashplayer forums.
It didn't make sense that I can view videos from virtually everywhere but I could not from Fox News and CBS. Something was in conflict but I couldn't figure out what.
It turns out I had an issue with Doubleclick.net. In Internet Options - Security - Trusted Sites - Sites is where you need to go. If you find this is a restricted site - remove it. In my case, it was not there but I added the following to my trusted sites - https://*.Doubleclick.net and low and behold all is well. I watched a number of Foxnews videos and I finally got to see CSI from CBS online.
How this happened I'm not sure but sometime ago, I had this crazy notion of opting out of advertising via AOL. A number of email accounts are through AOL and I suspect something got corrupted as a result.
I hope this can resolve this issue for some of you who have this problem but looking at internet options via your control panel appears to be the least aggravating area to start!

Similar Messages

Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything ov

Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything over the internet. Any clues?
== This happened ==
A few times a week
== Couple of weeks ago

Your UserAgent string in Firefox is totally messed up by another program that you installed, and Barclays doesn't know you are using Firefox 3.6.6 - it probably looks like IE 6.0 to that website.
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter
''If you see the warning, you can confirm that you want to access that page.''
Filter = '''general.useragent.'''
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset''''',
Then restart Firefox

TS1702 My app store does not load the featured apps, also in charts. Everytime i open the app store, the screen remains blank. Im using ipad3, ios6.

My app store does not load the featured apps. The screen remains empty everytime I open it.

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Mail does not load the mail after opening with 10.10.3 on macbook air

Mail does not load the mail after opening with 10.10.3 on macbook air

Under Window in the Menu bar select Connection doctor. You will see green to indicate a connection and red to show there is a problem. Except for iCloud account you'll see two entries for each account 1) receiving and 2 SMTP for sending.
If it's red, this usually means it's missing the password.
For Incoming messages, set in the account window, under Account Information tab.
For Outgoing (SMTP) messages, follow these steps:
EDIT SMTP SETTINGS
In Accounts window > Outgoing Mail Server SMTP: select to Edit SMTP Server list... from popup.
Select account in the list.(It's not uncommon to find extra SMTP servers listed. When you remove account, Mail does not delete the smtp info. You might need to do some clean up in the list to remove the extras.)
Under Advanced Tab:
Apple defaults to the default ports (25,465, 587) but some servers prefer a custom port. Check to see what port they recommend. Gmail for example likes 465, Outlook.com 587.
Verify if your server require SSL.
User Name. Enter full email address eg. [email protected]
Add password if it is blank.(If you have two step authentication setup, you'll need to get an app specific password more info)
Open Connection Doctor under Window in the Menu bar.
Do you see green light now for your account SMTP?

Safari does not load the website

Hi,
I am running MAC OS X 10.4.7 using Safari Version 2.0.4 (419.3).
Ever since I started using this computer (1 week back) Safari just does not load the pages. The website that I am trying to load is http://www.apple.com/startpage/ or the default page of Safari as installed. This also happens with many other pages.
The browser starts loading the page and the blue bar just stops mid way and nothing happens post that. I have waited for almost 20mins for it to load, however that never loads. If I press the Stop button, I do see the partial HTML thats loaded in the browser, but the page never loads completely.
My internet connection is fast, since I am able to load the same page or any other page in FireFox with no problems.
Can you please support me with what to look at to resolve this problem?
Mac Book Pro Mac OS X (10.4.7)

Hi! Yes I have experienced similar difficulty with Safari 1.3.2 (v312.6). Although I am using Safari to browse this site now, it does seem prone to reject some sites. When it works it work beautifully. There must be a gremlin glitch in there somewhere!
All I can suggest that that you switch to another browser such as Netscape 7.2 or Firefox to resolve this issue as and when it happens.
Happy surfing!
Technoapple.

Swf does not load the images on the web

I made a swf that works perfectly on my computer.
The swf does not load the images, cal with the buttons, when I use the swf on the web.
I think the problem is due to the fact that the web changes the path of the file, that is called with the following variable:
var ImmageUrl: String = "MyFolder2 /" + MynamePic + ".jpg";
The path is C:/MyFolder1 "(with the swf)" /MyFolder2 "(with the pics)"
Any hint ?
Thank you.

When you place an swf in a web page, any files that the swf loads have to be targeted as if the swf is sitting in the same folder as the html page. If you have the swf in a different folder than the html page, then you need to adjust the paths for the files it loads so that it acts as if it is in the html page's folder.

Sometimes when I open a link in a new tab, the new tab does not load the link.

Sometimes when I open a link in a new tab, the new tab does not load the link. This seems to be random.
Win 7 64
FF 4.0.1

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

JMF Does not release the RTP ports

Hi,
I am working on a program that simply listens RTP messages from the network and play them on a PC. My datasource is created as follows:
String url2= "rtp://127.0.0.1:10000/audio/1";
medialocator=new MediaLocator(url2);
ds=Manager.createDataSource(medialocator);
This ds will later be given to a player for the local playback. It has a flow like this: DS->Processor->DS->Player.
Everything works fine for the first execution. The stream is played. However when I stop the player, processor and even the ds, JMF does not realease the RTP ports. I still can see them in the netstat output. Heres how I try to release the resources:
public void releaseResources(){
try{
if(player!=null){
player.stop();
player.deallocate();
player=null;
if(ds2!=null){
ds2.stop();
ds2.disconnect();
ds2=null;
if(processor!=null){
processor.stop();
processor.removeControllerListener(this);
processor.deallocate();
medialocator=null;
ds=null;
Because of this problem, when I try to do the same thing on the same url after sometime, it gives the error "Cannot create the RTP Session: Can't open local data port: 10000". The ports are released after I shutdown the JVM.
Does anyone have an idea on how to release this ports in the same JVM session?
Thanks a lot,
Murat

DataSource objects open a connection to their source, in your case, a connection to an RTP port. You need to call
ds.disconnect()
on both datasources, but SPECIFICLLY on ds (as opposed to ds2) if you want it to release the port.

My computer says it is connected to internet but it does not load the webpage

my computer says it is connected to the internet, full bars but it does not load the webpage when i click on safari

If you are connected wirelessly it is possible to have full bars, but your wireless router connection to the Internet could be the problem. Try restart your router.

Firefox 26 does not load the home page. Instead, it loads the previous session (and that includes all the tabs). It does not matter how Firefox is closed.

Firefox 26 does not load the home page. Instead, it loads the previous session, irrespective of what has been entered in "Options". The browser is running in Win 7.0 64-bit; Norton Internet Suite 21 provides the security functions. There are certain "cloud" solutions also running such as Google Drive, Box, Skydrive and Cubby. The browser behaves similarly in all my machines (the setup and OS is similar to the one described above) and no amount of resetting of "Options" seems to affect it . Nor is it affected by the manner Firefox is closed. It is obviously a bug that needs to be fixed.

u wait for firefox next update
otherwise
1. go to firefox tab .
2. click on help ->trouble shooting information.
3. reset ur browser .
ur problem is solved

Using Firefox 3.6.20 and Windows XP Home SP3. Firefox sporatically deletes bookmarks from the bookmarks toolbar. Additionally, when I try to import from a saved HTML file, Firefox does not import the complete file. Results are inconsistent.

Using Firefox 3.6.20 and Windows XP Home SP3. Firefox sporatically deletes bookmarks from the bookmarks toolbar. Additionally, when I try to import from a saved HTML file, Firefox does not import the complete file. Results are inconsistent.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Does not accept the completion of the process of buying

Does not accept the completion of the process of buying
is the answer to
Your purchase could not be completed
For assistance .contact iTunes support at www.Apple.com

Hi Rander4,
Sorry i am just responding, I had to find out from the shop where I purchased the IPhone if it was jail broken and I ve now confirmed that it was not jail broken.
What could possibly be done?

Since updating to Firefox 22 Twitch.tv does not load the player anymore

I just updated to Firefox 22 and no Twitch.tv's player simply does not load anymore. Just a black rectangle where the player is supposed to be and if I rightclick in that area, I get the same context menu as everywhere else, meaning that the player definitly did not load. Youtube works fine though.

This gotta be the worst ff upgrade ever, every single thing breaks

Firefox in Windows 7 under a proxy do not show many icons and images in Google applications. Reinstall it does not solve the issue.

Google applications (spreadsheet, ...) does not show the icons properly.
Only when hovering over the buttons, the tip appear and you can see what does the button.
Best regards

Hello all
Thank you very much!.
I have tried the solution and it worked perfectly, both for Google search "Images" tab and for Google Docs icons. The problem was in the Google images and icons permissions.
Other person in my company had the same problem and now it is solved. You have killed two birds with one stone (^_^).
Thank you
Koldo

Windows 7 does not load the ipad bluetooth drivers

I am trying to connect my ipad 2 to a windows 7 computer and the computer will not load the ipad blutooth drivers so a connection is never made.

Hi Phil,
It's funny that you say that Reflector runs on Wifi and not Bluetooth. I thought the same thing and that's why I was having a difficult time with getting this to work...on top of the bluetooth drivers not installing properly.
When you initially connct your iPad device to your computer through bluetooth, your PC installs bluetooth drivers...you can see this by the little notifictaion you get that says this. Setting up your device...installing drivers. So you can't tell me that there are no iPad bluetooth drivers.
You have to enable bluetooth on your ipad to get to the mirroring icon. (double tap your home button and scroll to the left. The mirroring icon should be visible and only visible if you have bluetooth turned on. Now if you run Reflector, then you should see the name of your PC that you shared through Reflector. Then you click on the mirroring app on your iPad and select the shared name on your PC and slide the mirroring toggle button to turn it on.
I have tested this on another laptop running Windows 7 and everything installed perfectly fine...even the bluetooth drivers.
So my conlusion is that it is the bluetooth drivers at fault here, since they didnt install properly. No matter how many times I remove the device and readd it, the bluetooth drivers do not install and I see red x's beside them.
Not sure what is keeping the drivers from being installed.
BTW...thanks for your reply Phil...see posting to this year old thread did me some good as you replied
cheers,
Tom

Application based on JMF does not load the complete Video

Similar Messages

Maybe you are looking for