Application builder supporting dlls for nidaq and nidmm

I was use application builder to create installations. I don't want to include the huge installs for nidaq and nidmm. Is there a list of the dlls required that I can put as supporting files in the application builder.

I spoke with another one of our other Applications Engineers who spoke with either yourself or another person with the same question on the phone today. He indicated that there is no smaller set of DLLs to use as drivers for this code, and that the solution reached on the phone was to make the drivers available on a central server so that they didn't have to be distributed directly with the application. People could just install them from the server instead.
If this is not an option, the full install files for the NI-DAQ and NI-DMM drivers would have to be included with the built appliction and installed by the end user. Or perhaps instructions could be included with the application about where to download the drivers from the NI website (www.ni.com/downloads).
Sincerely,
Ross C
National Instruments

Similar Messages

I did an auto-update on itunes today and now itunes is unresponsive..it gives this error "An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."

I did an auto-update on itunes today and now itunes is unresponsive..it gives this error "An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
Wouldn't apple check before releasing new version, I see so many people with same issue..its such a waste of time for everyone now to fix it.
Is there any other way to fix before I try to un-install everything and re-install back?

Hello iTunes_Bad_Update,
The following article provides information and troubleshooting steps that can help get iTunes back up and running.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

Hey Debbiered1,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh

I found this program sqlite with dll for firefox and thunderbird, is this a program thatis pat of your system? Should I delete entries or leave them alone?

I am looking for what is generating internet activity on my pc and I came across entries for sqlite.exe that has dlls for firefox and thunderbird. Is this a program you use with these programs? Should I leave it alone ot delete?
Paul Shodean

Also, although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].

Microsoft Visual C Runtime Library Runtime Error! Program: C:\Program Files (x86)\iTunes\iTunes.exe R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.

Microsoft Visual C++ Runtime Library Runtime Error! Program: C:\Program Files (x86)\iTunes\iTunes.exe R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program Files (x86)...
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
OK

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't normally affect its library, but that should be backed up anyway.
(99146)

Does OATS support recording for Globalization and Localization?

We are looking to automate an EBS application that support 30 different languages and also has localization for some countries. Can we use OATS for regression automation? Does OATS support Globalization and Localization?

If you are testing web application, It requires to have webdom.api imported and reference scriptservice in the class.
import oracle.oats.scripting.modules.webdom.api.*;
public class script extends IteratingVUserScript {
@ScriptService oracle.oats.scripting.modules.webdom.api.WebDomService web;
Then you can reference in your script depending on the component that you are trying to drag. Below command will give you some idea on how to do it.
web.element("{{obj.Reservation.LTB Rate Code Select}}").dragTo("{{obj.Reservation.LTB Trip Composer Est Grand Total}}");
Thanks,
Sri

WRT320N - Does it support DCHP for PPTP and for L2PT?

Hello, I bought this router, and faced with the problem - how to establish internet connection. My ISP supports only DHCP for PPTP and L2TP, it gave me URL (vpn.corbina.net and tp.corbina.net). I found one topic in local forum with an explanation how to establish internet connection with the same ISP, but for wrt610n. The basic setup page is the same for these two routers, but my router does not work, neither with L2TP nor PPTP settings. It cannot connect to these two servers, and thats all. With 'ping' I found IPs of these servers.
Currently, I use asus wl520gc, and it supports dchp for vpn, and have no problems with it.
Maybe you have some ideas how to resolve this problem.
Solved!
Go to Solution.

When I'd like to use pptp connection. I set "Obtain an IP address automatically", put "pptp server ip address" - 85.21.0.21. I detected this ip with ping, also i spoke with ISP support and they told me that this serve has dchp and it doesn't have static ip.
Than I put user name and password, and press save. Than router saves the settings, I look the status page and see current status as disconnected. I press connect button and router tries to connect, I can see how it gets ip address, gateway ip, dns ips, than there is a sign - connecting, later on, appears small window - impossible to connect to server. And the current status is disconnected.
Firmware Version: v1.0.03 build 010 Jul 24, 2009 Firmware Verification: b719582d5f3e57c1f7932a15d20ff509
Current Time:
Internet MAC Address: 00:1F:F3:51:4A:9C Host Name:   Domain Name: corbina.net
Internet Connection Connection Type: PPTP Login Status: Disconnected   Internet IP Address: 10.171.59.49 Subnet Mask: 255.255.248.0 Default Gateway: 10.171.56.1 PPTP Server IP Address:85.21.0.17 DNS1: 213.234.192.8 DNS2: 85.21.192.3 DNS3: MTU: 1460
Error - Can not connect to PPTP server
The same is with l2tp.
Connection Type: L2TP Login Status: Disconnected   Internet IP Address: 10.171.59.49 Subnet Mask: 255.255.248.0 Default Gateway: 10.171.56.1 DNS1: DNS2: DNS3: MTU: 1460
The same error.

Flash Builder 4.5 for PHP and ANT

I just installed Flash Builder 4.5 for PHP Premium and I am trying to install ANT so I can automate the AsDoc generation process.
In the past (Flash Builder 4), I just point to "http://download.eclipse.org/releases/galileo/" and select "Eclipse Java Development Tools".
However, when I do the same in " Flash Builder 4.5 for PHP Premium", I got an error message saying that a newer version of "Eclipse Java Development Tools" has already been installed. I go to the "Already Installed Software" tab, and indeed I see "Eclipse Java Development Tools" under "Eclipse Java IDE", but ANT is nowhere to be found.
By the way, I am doing everything on the stock, standalone Flash Builder 4.5 for PHP Premium.
Any suggestion is much appreciated.

I also have Flash Builder 4.5 for PHP and the ANT view does not show when going to Window -> Show View --> Other. I could not find it in any of the folders.
However, I was able to add it by hitting Command 3 (CTRL 3 on PC) and typing Ant.

Which application server is requierd for form9i and for form10g

which application server is requierd for form9i and for form10g

Oracle Application Server 9.0.2 (Forms 9i) and Oracle Application Server 10g (9.0.4) (Forms 10g)
Frank

Applications - are they only for touch and phone?

Are there any applications for the 30g ipod 5th generation?

Applications - are they only for touch and phone?
Yes.
Are there any applications for the 30g ipod 5th generation?
No.
(36283)

Application builder ver7.1 for Linux

I have compiled a program with Application Builder version 7,1 in
Linux. The compilation has not given problems. When I launch the
file.exe appears an error. The program does not find a
share library (lvanlys.so).
The application builder during the phase of compilation it has not created the library lvanlys.so.
Why?

jhoskins wrote:
> Just one question for ROLFK, I have used the lvanllys.dll many
> times in a build (Windows) and have always had to add it into the
> build. Even when I choose to create the installer. Why is that?
> Is the dll native to labview or to the runtime engine.
It is part of the implementation of the analysis library functions of
LabVIEW. I checked this and since LabVIEW 7.1 the runtime engine does
install its own lvanlys.dll (and MKL "Intel Math Kernel Library" which
is the actual implementation of a large part of the functions from the
analysis library since LabVIEW 7.1)
Before that lvanlys.dll was self contained and treated by the
application builder just like another user DLL which got included in the
application build itself.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Does a Latest Application builder supports older Version LabVIEW 8.5 or 6.2?

Currently I'm using LabVIEW Full Development System version 8.5 I want
to install Application Builder, the current version of which is 8.5. If
I purchase Application Builder now, will I be forced to upgrade the
LabView Installation too? How to find out the version number of the
application builder which i have? I am aware that it is a serial number
that i will be recieving for application builder and i have to just
activate in license manager. Does it works this simple? or a latest
version application builder wont support my older version LabVIEW.

For such a specific question you should contact your local NI sales rep. They should know there way around in the various licensing schemes NI has.
But I think this should be doable.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Oracle.dataaccess.lite_wce.dll and what would be the dll for berklay and sq

Hi all,
With oracle lite and vb.net we are using oracle.dataaccess.lite_wce.dll for data access..
What is the new dll for the berklay and vb . net for windows mobile 6.x devices.
What is the new dll for the sqlite and vb. net for windows mobile 6.x devices.
Please post the url for the downloads of those and the usage of api.
This will be helpful to others as well.
Thanks
Paninie.

Hi rekounas,
Thanks for the reply. I downloaded the System.Data.SQLite.dll..site says we need .net compact 3.5 and above for this dll.
It seems that the application which use oracle.dataaccess.lite_wce.dll has to be changed to suit to
sqlite..... And im trying to test them.. what is the dll for berklay for the .net? It looks the applications needs lot of changes on this
and oracle site does not have the requiierd dll in their site like the oracle.dataaccess.lite_wce.dll
will have to do lot of experiments in doing this...
Will post the progress once the testing started .. thanks
paninie

Does sccm 2012 supports ibcm for linux and unix operating systems

folks,
does SCCM 2012 supports linux and unix operating system for IBCM ..........as per my knowledge it dont what i have learn t through bing........

I thought it's not supported for Linux and Unix, see also:
http://blogs.msdn.com/b/teju_shyamsundar/archive/2014/05/23/installing-the-system-center-2012-r2-configuration-manager-client-on-linux-part-2.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How do I configure my application to provide access for mobile and web brow

Hi everyone.
I have one application and I need to provide access for mobiles and desktop browsers, and I don't know how do I configure my application to do this.
Let me explain:
In my jDeveloper I have One application and 3 projects:
-Mobile (here is my mobile application)
-Model (here is my model)
-ViewController (here is my Web Browser application)
In Mobile I have
JavaEE Web Application name: mobile-Mobile-webapp
JavaEE Web Context Root: mobile
ViewController I have
JavaEE Web Application name: mobile-ViewController-webapp
JavaEE Web Context Root: myapplication
When I run some page of ViewController I have this URL "http://localhost:7101/myapplication/index.jspx".
When I run some page of ViewController I have this URL "http://localhost:7101/mobile/index.jspx".
My problem is that, I want to have Just one landing URL like that "http://localhost:7101/myapplication/index.jspx" and when I get this URL by Desktop Browser my ViewController is showed, and when i get by Mobile the Mobile project is showed.
Someone knows how do it?
Thanks....

Yes, I can, thanks for response.
But, don't have some configuration in Oracle for this? I've been thinking do this with java or JavaScript, but I was looking something more beautiful for this.
Java or JavaScript is the only way?

Application builder supporting dlls for nidaq and nidmm

Similar Messages

Maybe you are looking for