Application Catalog Site URL Auto Selection Producing Unexpected Results

Hi All,
Thank you in advance for the help.
We have a client with about 90k computers managed by a CAS and four child primary sites. Each of the four primary sites exists in the AN forest and
has a DMZ remote site system with MP, DP, SUP and AppCatalog Website Roles to support IBCM clients in the AN forest. The AppCatalog WebService Role is hosted on the primary site servers themselves.
Additionally we support two remote non-trusted forests, CVGH and QH. We have deployed a single DMZ server in each of the remote forests with MP, DP,
SUP and AppCatalog Website Roles to support IBCM clients in the remote forests. (There are also Intranet site systems in the CVGH and QH forests supporting these forests’ clients within the primary sites.)
All certificates are configured correctly. All authentication is working as expected. Clients in remote forests are able to deploy packages/applications/software
updates via Computer Policy and User Policy successfully. Each DMZ server has its own Internet published FQDN and is configured for Internet Only client communication via https.
Clients within the AN forest connected via the IBCM DMZ servers in the AN forest are provided with the correct Internet facing FQDN for their respective site’s Application
Catalog and these FQDNs are successfully inserted into the Trusted Sites Zone. For example, a client in the PR1 site that exists in the AN forest is furnished with the FQDN for that site’s AN DMZ remote site system. This results in the Application Catalog
link in Software Center successfully launching the Application Catalog from the Internet. The user is prompted for credentials from the AN forest and successfully authenticates to the Application Catalog and is able to install software as desired.
Clients within a remote non-trusted forest should be furnished with the FQDN of the remote non-trusted forest’s DMZ site system within the PR1 site for example. A client
in the QH forest which is managed by a DMZ server in the QH forest which is attached to the PR1 site is not, however, furnished with the correct FQDN for the QH forest’s DMZ site system. Instead it receives the FQDN of the AN forest’s DMZ site system. This
results in user’s attempting to launch the Application Catalog from the link in Software Center and being prompted for authentication against the wrong Application Catalog URL (in the wrong forest) and hence against the wrong forest entirely.
If we manually open a browser from a ConfigMgr client computer in the QH forest and open the correct FQDN URL for the QH DMZ site server’s Application Catalog website
instance from the Internet we are prompted to authenticate against the correct (QH) forest and are able to successfully download applications from the Application Catalog.
The issue is that per Technet the QH client should be furnished (or choose I’m not sure) the FQDN of the https: enabled DMZ site server in its forest as its Application
Catalog Website URL according to the rules of Application Catalog Automatic Site Selection (right?). The clients in our remote forests are not being provided with the correct FQDN for their respective forest’s DMZ site system’s Application Catalog roles or
are not updating these FQDNs in the Software Center link to the Application Catalog Website.
I have closely followed this article for troubleshooting:
http://blogs.technet.com/b/configmgrteam/archive/2012/07/05/tips-and-tricks-for-deploying-the-application-catalog-in-system-center-2012-configuration-manager.aspx
We believe our Default Client Settings are configured correctly as the Application Catalog website configuration is set to auto-detect. There is a higher priority workstation
only Client Settings that has the same auto-detect configuration for the Application Catalog that we believe is configured correctly as well.
We do not believe configuring another Custom Client Setting to hard code a URL for the remote forest would work as it would point Intranet computers to the FQDN for
the Internet DMZ servers when they should be pointed at the Intranet remote site systems for their respective forests.
LocationServices.log and ClientIDManagerStartup.log both fail to indicate any issues that I can identify. Clients are successfully assigned to the correct sites. Clients
are able to communicate with their respective Management Points in the DMZ. No errors are shown in the Application Catalog websites when they are manually accessed by their correct FQDNs.
There are no errors that I have seen in the portal logs for the Application Catalogs. As evidenced by their successful functionality when manually specifying the correct
site system’s FQDN in a browser we have no reason to believe that there is an issue with the Application Catalog websites themselves just the mechanism by which ConfigMgr clients are furnished with the correct FQDN for their forest and DMZ site system.
Again, thank you for your help. Any input is much appreciated.

Spoke to CSS. This is expected behavior FYI.

Similar Messages

Example programs producing unexpected results

I have a machine running RHEL 6 with the kernel driver and a PCIe-6321 connected to a BNC-2120. I'm trying to run the example programs as a sanity check that everything is fine before going forward. When I run dioex1, it claims to write then read 0x5A on port 0. However, the LEDs (labeled P0.0 through P0.7) do not turn on as expected. When I run aiex1, it appears that I'm just getting background noise. Am I missing something?
Running boardBringup produces sensible results.

My apologies. I was looking at the wrong infoobject. Different portions of the incoming field are used to populate different infoobjects.
In fact, the transfer routine I gave above is not the one that was producing the problem. Here's the one that was producing the problem:
IF strlen( TRAN_STRUCTURE-/BIC/BNSN_LMR ) eq 15.
RESULT = TRAN_STRUCTURE-/BIC/BNSN_LMR+13(2).
endif.
This rule is used when assigning a value to a two position character infoobject. When this code is applied to the value ''3 00675 03807 1' it picks off the last two positions, which are a blank and a 1. Without the ALPHA conversion routine running on the receiving infoobject, the leading blank is discarded, and the resulting value does not conform.
I enabled the conversion routine on the receiving infoobject and this solved the problem.
Thanks Olivier!

Netware bash diff command producing unexpected results

I'm wanting to compare the directory list of one directory with another. I'm using this command:
Code:
diff -q /email/CC-PO1 /email_arc/Restore/CC-PO1
but getting this result:
Code:
Only in /email/CC-PO1: 0816CHK.LOG
Only in /email_arc/restore/CC-PO1: 0816chk.log
Only in /email/CC-PO1: 0817CHK.LOG
Only in /email_arc/restore/CC-PO1: 0817chk.log
Only in /email/CC-PO1: 0818CHK.LOG
Only in /email_arc/restore/CC-PO1: 0818chk.log
for each file, it's saying it's only in one directory, but then says the same thing for the other directory, so clearly, the file exists in both directories, thus, I should see the file at all - at least that's how I understand it. I want to find files that exist in one directory but not the other.

Originally Posted by bkeadle
Again, I'm note crazy about having to create 2 separate files to then compare the differences as it seems very ineffecient/slow. Also, I note for each file found to delete, I see RM.NLM and LIBC.NLM being loaded. Is there anyway around that - loading and unloading the .NLM each time it's called?
As a practical matter, you don't have to.... I assume this is groupwise post office data and your primarily concerned with grooming the blobs in offiles.
If so, use a GWCHECK with the content check option to check the BLOBS, it will happily make a single pass through the BLOBS, and eliminate any of the junk. It will also tell you if you have issues with your backup... which is good to know. On our 10 million blob PO, it takes a day. On your 500K file version, a lot less.
You may be able to use the EFL on NetWare ( not sure if that exists ). The EFL ( Event File List ) works like / is a more generalized rendition of the MFL ( Modified File List ) and provides access to a journal of file changes. So deletion events could be captured and then replayed against the other file system. So.... no need to diff the file system.
And diffing the file system using sort | uniq -n | ... is a perfectly fine way to do it.
-- Bob

Installation of Cumulative Update 2 for SCCM 2012 R2 causes Application Catalog error Cannot connect to the application server"

I have update my primary server with cu2. Rebooted it when requested. Now everything appears to work except Application Catalog. I am getting HttpSendRequestSync failed errors in sms_awebsvc_control_manager and SMS_MP_CONTROL_MANAGER. Permissions
for the temp folder and the 2 service folders do have local service and system with full control. I reregistered .net 4 with aspnet_regiis -i -enable. Rebooted and no change. application pool is running. The install logs said it is
working. SQL is happy. I have reinstalled the two Application Catalog service points varous ways and they always come back with warm fuzzy logs stated they installed.
When someone tries to use Application Catalog the ServicePortalWebSite.log always produces the following errors:
[15, PID:9160][09/22/2014 15:32:27] :Passed in language: en-US
[15, PID:9160][09/22/2014 15:32:27] :Language resolved to: en-US
[15, PID:9160][09/22/2014 15:32:27] :SoftwareCatalog website - requested resource: ~/, api-version: ""
[16, PID:9160][09/22/2014 15:32:27] :Passed in language: en-US
[16, PID:9160][09/22/2014 15:32:27] :Language resolved to: en-US
[16, PID:9160][09/22/2014 15:32:27] :SoftwareCatalog website - requested resource: ~/, api-version: ""
[16, PID:9160][09/22/2014 15:32:27] :Passed in language: en-US
[16, PID:9160][09/22/2014 15:32:27] :Language resolved to: en-US
[16, PID:9160][09/22/2014 15:32:27] :SoftwareCatalog website - requested resource: ~/default.aspx, api-version: ""
[16, PID:9160][09/22/2014 15:32:27] :Got 5.0.7958.1000 build version
[11, PID:9160][09/22/2014 15:32:28] :Passed in language: en-US
[11, PID:9160][09/22/2014 15:32:28] :Language resolved to: en-US
[11, PID:9160][09/22/2014 15:32:28] :SoftwareCatalog website - requested resource: ~/ApplicationViewService.asmx, api-version: "1.0"
[7, PID:9160][09/22/2014 15:32:28] :Passed in language: en-US
[7, PID:9160][09/22/2014 15:32:28] :Language resolved to: en-US
[7, PID:9160][09/22/2014 15:32:28] :SoftwareCatalog website - requested resource: ~/ApplicationViewService.asmx, api-version: "1.0"
[11, PID:9160][09/22/2014 15:32:28] :ApplicationViewService.asmx - begin GetMobileApplicationValuesForProperty for property:Category, filter None
[11, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - retrieving client proxy using endpoint SecureBinding_IApplicationOfferService
[15, PID:9160][09/22/2014 15:32:28] :Passed in language: en-US
[15, PID:9160][09/22/2014 15:32:28] :Language resolved to: en-US
[15, PID:9160][09/22/2014 15:32:28] :SoftwareCatalog website - requested resource: ~/ApplicationViewService.asmx, api-version: "1.0"
[11, PID:9160][09/22/2014 15:32:28] :FindCertificate - Found certs via FindByThumbprint, count = 1
[11, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - opening channel via client proxy
[15, PID:9160][09/22/2014 15:32:28] :ApplicationViewService.asmx - begin GetApplications, startItem = 0, search text = ''
[7, PID:9160][09/22/2014 15:32:28] :ApplicationViewService.asmx - begin GetMobileApplicationValuesForProperty for property:Category, filter None
[7, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - retrieving client proxy using endpoint SecureBinding_IApplicationOfferService
[15, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - retrieving client proxy using endpoint SecureBinding_IApplicationOfferService
[7, PID:9160][09/22/2014 15:32:28] :FindCertificate - Found certs via FindByThumbprint, count = 1
[7, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - opening channel via client proxy
[15, PID:9160][09/22/2014 15:32:28] :FindCertificate - Found certs via FindByThumbprint, count = 1
[15, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - opening channel via client proxy
[11, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
Server stack trace:
at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Security.TlsnegoTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SymmetricSecurityProtocol.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.Connection.DefaultApplicationOfferService.Open()
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.AppView.GetApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetMobileApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter, String reserved)System.Net.WebException: The remote server returned
an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
[11, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
Server stack trace:
at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Security.TlsnegoTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SymmetricSecurityProtocol.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.Connection.DefaultApplicationOfferService.Open()
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.AppView.GetApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetMobileApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter, String reserved)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetApplicationValuesForProperty(ApplicationProperty propertyName, String reserved)System.Net.WebException: The remote server returned an error: (500) Internal Server
Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
[7, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
Server stack trace:
at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Security.TlsnegoTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SymmetricSecurityProtocol.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.Connection.DefaultApplicationOfferService.Open()
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.AppView.GetApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetMobileApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter, String reserved)System.Net.WebException: The remote server returned
an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
[7, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 1
Any feedback is appreciated.
Mike In Vancouver

The following repeats hourly since installing Cumulative Update 2 in the log awebsctl.log:
Completed the AWEBSVC availability check against local computer.
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 5:09:45 AM
4436 (0x1154)
Waiting for changes for 60 minutes SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 5:09:45 AM 4436 (0x1154)
Timed Out... SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Starting certificate maintenance... SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Certificate (0x3adbdab0) is Exportable SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Successfully granted permission to certificate
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 6:09:45 AM
4436 (0x1154)
Successfully completed certificate maintenance
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 6:09:45 AM
4436 (0x1154)
SSL is not enabled. SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
Health check request failed, status code is 500, 'Internal Server Error'.
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
STATMSG: ID=8100 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_AWEBSVC_CONTROL_MANAGER" SYS=server.site.com SITE=ABC PID=3000 TID=4436 GMTDATE=Tue Sep 23 13:09:45.600 2014 ISTR0="500" ISTR1="Internal Server Error"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
Completed the AWEBSVC availability check against local computer.
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 6:09:45 AM
4436 (0x1154)
Waiting for changes for 60 minutes SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Mike In Vancouver

Unexpected Result with Application Process

Hi Everyone,
I have an application process which is producing unexpected results. The code is below. What does is, updates one table, then based on that update inserts some data into a different table. The process workes fine. However, when the table gets updated it updates by 2 when it should only update by 1. Does anyone see where i am going wrong?
Its really anoying lol
Thanks in Advance
-N.S.N.O.
Code*
BEGIN
update pzrckt01 set CLK_NEXT_NR = CLK_NEXT_NR+1 where CLK_PARTITION_ID='QWC';
htp.p('Start debugging');
htp.p('QWC_KEY_ID : ' ||wwv_flow.g_x02);
htp.p('SYS_ID : ' ||wwv_flow.g_x03);
htp.p('QWC_DELETE_CD: ' ||wwv_flow.g_x04);
htp.p('QWC_CUS_ID : ' ||wwv_flow.g_x05);
htp.p('COU_ID_QWC : ' ||wwv_flow.g_x06);
insert into PZRCUT01 (QWC_MYTNT_ID,QWC_KEY_ID,SYS_ID,QWC_DELETE_CD,QWC_ADD_TD,QWC_ADD_USER_ID,QWC_UPDT_TD,QWC_UPDT_USER_ID,QWC_SOFTLOCK_TS,QWC_CUS_ID,COU_ID_QWC) values ((select clk_next_nr from pzrckt01 where CLK_PARTITION_ID ='QWC'),wwv_flow.g_x02,wwv_flow.g_x03,wwv_flow.g_x04,(select sysdate from dual),(select :APP_USER from dual),(select sysdate from dual),(select :APP_USER from dual),(select systimestamp from dual),wwv_flow.g_x05,wwv_flow.g_x06);
EXCEPTION WHEN OTHERS THEN
htp.p('Exception');
htp.p(SQLERRM);
END;

Hey,
There are no triggers on these tables im working with. A way to get around waht im tryin to do is have 2 application processes, one for the update and one for the insert. but to do this i would need them to be fired off using the same button.
for example in my HTML Header having a function within a function.
function pzrcut01Insert(){
function pzrckt01Update(){
var ajaxRequest = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=update_pzrckt01',null);
var ajaxRequest1 = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=PZRCUT01_INSERT',null);
ajaxRequest1.addParam('x02', $v('P6_QWC_KEY_ID'));
ajaxRequest1.addParam('x03', $v('P6_SYS_ID'));
ajaxRequest1.addParam('x04', $v('P6_QWC_DELETE_CD'));
ajaxRequest1.addParam('x05', $v('P6_QWC_CUS_ID'));
ajaxRequest1.addParam('x06', $v('P6_COU_ID_QWC'));
var Answer = confirm('Are you sure you want to update?');
if (Answer) {
gReturn=ajaxRequest1.get();
if (gReturn) {
alert(gReturn);
ajaxRequest1.get();
alert('Attempted Insert Processed');
}else{
alert('Attempted Insert Cancelled');
would this be possible?
-N.S.N.O.

Method from Random class yields unexpected results

Hi,
I understand that the following code should generate a random integer within the range of 0 - 3, but the range is actually 0 - 4. Can someone tell me why it doesn't behave as expected? Could it be the version of Java I'm using?
Random rand = new Random(47);
int a = rand.nextInt(4);Thanks!

gluedtothecomputer wrote:
You're right! It seemed to be producing unexpected results because I had incorporated a switch statement without breaks (part of my assignment). So, .nextInt() works as expected.
Thanks!Since you didn't post that code or even allude to it, it would have been hard for use to guess that's what you did, right?
That's why the best way to ask for help is for you to write and post a SSCCE .
Keep that in mind for your next post.

Publishing site will not create catalog item URLs

I have an authoring site with a list that I have enabled as a catalog. When I move over to my publishing site (sites/Publishing) I am able to connect to that catalog. I have Managed Navigation and my term store set up and the links are generate across the
top (Ex: planes, trains, automobiles).
When I click on one of those links, say automobiles, the page displays correctly (sites/Publishing/automobiles). But, when I try to click on a catalog item I am just taken back to sites/Publishing. It appears that no friendly URL was created as I specified
when I made the connection.
What could I possibly be doing wrong? Hopefully I described this well enough

Is the site a public anonymous site or just for internal use?
Be sure to add a Root term to the product hierarchy (or whatever you may have changed the termset name to)
when setting your columns for use in a catalog, It’s worth noting the default unchecked of “Allow multiple values” is important. Multiple value columns are unsupported for the column used in integration.
Also, for the terms to function properly in nav, Add your publishing site URL to the site collection access line for the term group so it can present the terms as friendly URLs and navigation on the consuming Site Collection.
Alternately, if you want it available globally, you can create a new group under the global MMS, then move the term set to the global group
Connecting to your catalog requires Publishing features at SPSite & SPWeb level
Crawl must run against the catalog content after it was enabled as a catalog in order for it to show in Manage Catalog Connections
Don’t forget to allow access to the Product Hierarchy Term Set.
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

Error when attemtping to open the application catalog with Firefox

We are actively migrating to our CM2012 R2 CU1 environment. However, we have a number of different browsers and versions in use.
We've recently seen an issue in Firefox 37.0.1 when some people (but not all) attempt to open the application catalog. Firefox will display the "This connection is untrusted" message. The users will select the option of I understand
the risks. They are presented with the button to "Add Exception". However, when they select that, nothing happens.
These individuals are administrators on their workstation. We've tried having them do the "Restart with add-ons disabled" as well as deleting the cert8.db and cert_override.txt files. They still get the same result.
Then I saw this:
https://technet.microsoft.com/en-us/library/gg682077.aspx Firefox 15?? This document was updated in March.
The majority of our users do not use IE as they prefer Chrome and/or Firefox.
Has anyone experienced this with Firefox?

Couple of notes that may be of value you to:
1. Even if you are using an alternative browser, the security zones that you see in IE are applied at the OS level, and thus making sure said app catalog site is either in the trusted sites or intranet sites zone is required for everything from auto-sign-in
to app deployment.
2. Chrome stopped supporting Silverlight back at the end of November. As that's required for the AppCatalog, that's not an option for now. Not your direct question, but something to be aware of.

Application Catalog Issues SCCM 2012 R2

Hi,
I am trying to get the Application Catalog working.
Quick first question. Is there anyway to force the link in Software Centre to open IE rather than the default browser which is Chrome in my case? I suspect not but asking anyway.
My main issue however is the Certificates. Using a standard Certificate with only the FQDN as the DNS entry for the Alternative Name works. The issue with that however is as the site loads using the Netbios name I get a certificate error.
I have tried setting the website through Client Settings to use the FQDN however when I then try to load the site I get the 401 - Unauthorised Access message.
I have tried creating a new certificate with both the FQDN and Netbios name listed as DNS entries (This may be wrong as certificates are not my area) and setting the Client settings back to auto detect. This works so much as the site loads but says: "the
website cannot communicate with the server" in the main section of the screen but still has the Application Catalog theme.
I have tried a few things with different combos but I cant figure out what I am doing as IIS isn't my area either. Not sure why adding in the FWDN to the URL suddenly completely breaks the website with 401 message or why having a certificate with the Netbios
as well as the FWDN on the cert breaks communication.
Any help would be great. I have made no changes to the default settings other than what is listed above.
Cheers,
Zac Avramides

Like all things SCCM it appears this was a time issue. Still unsure as to why having the FQDN over the Netbias names creates 401 errors though. Would be nice to know why. Needed to allow around an hour after the certificate update on IIS in order for the
change to work. Simply added the both the FQDN and Netbios names as Common Names and DNS Entries.
Would still like to know if it is possible to direct Software Centre to IE rather than Chrome as Chrome will always have the error.
Zac Avramides

Newly created Applications do not appear in Software Center or Application Catalog

I'm still rather new to SCCM; but I'm slowly working towards configuring an application to be deployed to my clients via an application package that I configured. I set something up for deployment, and it's my understanding that the app should show
up in the software center for the users that it's deployed to.
However, I'm having an issue where not only is it not showing up, but it's not being installed on the clients I've deployed it to. The main problem is that I have no idea how to troubleshoot this - I don't know what logs to look at for issues (or where
the logs are); and I've been having a ton of trouble locating 'basic troubleshooting' info for application deployment.
If anyone could point me towards info that can get me on the right path for troubleshooting why my application isn't either automatically installing on the clients or why it isn't showing in the software center/application catalog, that would be very helpful.
Thanks!

I created the app on Monday, then did the deployment to a computer collection; Tuesday I read something that implied for it to show in software center it had to be deployed to a user collection, so I did that. I have told it to distribute the content
to all 3 of my distro points (three physical offices, one DP in each office), and I did that on Monday, then again on Tuesday when I deployed to the user collection.
Looking at it now, it seems as though the content hasn't been deployed to the other DP's yet though. When I go to Monitoring - Distribution Status - Content Status and select the application I created, it shows the status as 1 success (primary office/sccm
site/where the content was located when I created the package), and two as 'in progress' (other two sites), but has shown in progress for over 24h now. When I look at the further detail for the distribution - for one site the message shows last status
time of yesterday at 4:30pm and says "the content files for package <package id> have not yet arrived from the source site." the other one has the same last status time, but says "distribution manager instructed scheduler to send
package <package id> to child site."
So either the distribution is taking forever or it hasn't updated the status since it finished. Either way, maybe this is the par that I need to look into?

Pages library catalog item url

I've setup authoring and publish web application , first web application (authoring) has one site collection with pages library catalog and anonymous enabled and correctly setup, the second web application has one site collection that consume authoring pages
catalog with content search webpart , but I have situation that I need to use the link directly for static page , ex.
Authoring Site > Pages > Aboutus.aspx
Publishing site > footer> About Us (need to link directly to the page in authoring aboutus.aspx) but I need the link appear in publishing site url not authoring one , how could I do this ?
the publishing site connected to catalog without integrate

Unfortunately, I'm having a hard time understanding your question. (I know it can be hard to post questions in another language!) Can you ask your question again?
Blog:
blog.beckybertram.com |
RSS | @beckybertram |
SharePoint 2010: Six-in-One

Auto selection of file from folder during uploading??

Hi all friends,
Iam facing with one problem I am developing one uploading software for that i have used swing and servlet.Now my problem is i want to give auto selection of file from one folder means user just copy the files from any computer on network and paste it in predefind folder.And when they click on upload button it should start uploading of file one by one and after completion of uploading it move that file into another folder one by one.Now my software doing it perfectly but if user copy and paste any file in that predifined folder from network computer during uploading then they have to click upload button again after completion of first queue of files(for example if user first copy 10 files and start uploading and inbetween uploading of that 10 files if user copy another 10 files from network computer then they have to click on upload button again after completion of uploading of first 10 files).But my user requirement is they want to click on upload button once only at the time of starting my application and my application automatically select the file one by one from folder and send it to destination.Means if they copy the file from network machine inbetween uploading or any other user from network send file in that folder then my application should select those file automatically and start uploading means they don't want to click on upload button again.Can any one plz guide how I can slove this problem.Below r my codes:-
Upload.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
try {
suspendflag=true;
Resume.setEnabled(false);
Suspend.setEnabled(false);
dest=frame.m_txtURL.getText();
File ff=new File("d:\\DTMS\\Upload");
File[] files = ff.listFiles();
fileList = new Vector();
if(files == null)
textArea.append("There is no file");
return;
else
for (int j = 0 ; j< files.length ; j++)
fileList.add(files[j]);
java.util.Collections.sort(fileList, new FileComp());//sorting by size
new Thread(new Runnable() {
public void run(){
for (int k = 0; k < fileList.size(); k++)//loop for queue {
File fname = (File)fileList.get(k);
String str=fname.getName();
log("Destination:" +" "+ dest);
log("Uploading Progress\nPlease Wait....");
result=doPost(fname,dest);//method for read file & send to servlet
String str2="Transfer apparently failed.";
String str3=result;
if(str2.equals(str3)){
Error(result);
else if(suspendflag==true){
File newfile =new File("d:\\DTMS\\Archives\\"+str);
fname.renameTo(newfile);
log("File" +" "+ str+" "+"Upload Completed !");
else if(suspendflag==false){
Error("** Transfer Suspended**");
}).start();
}catch(Exception exp)
Error("Error : " + exp.toString());
Regards
Bikash

Hi Chandan,
                    All the multiselection files are stored in it_tab( i:e file_table in method). you need to loop the every record to upload the data for selected files. please check the code Below...
DATA: file_str1 type string.
data: it_tab TYPE STANDARD TABLE OF file_table,
     wa_tab TYPE file_table,
       lw_file LIKE LINE OF it_tab,
       gd_subrc TYPE i.
SELECTION-SCREEN begin of block blk with frame title text-100.
SELECTION-SCREEN SKIP 2.
parameters : p_file like rlgrap-filename .
SELECTION-SCREEN end of block blk.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = 'Select only Text File'
default_filename = '.azt'
multiselection = 'X'
CHANGING
file_table = it_tab
rc = gd_subrc.
*READ TABLE it_tab INTO lw_file INDEX 1.
*p_file = lw_file-FILENAME.
Start-of-Selection.
loop at it_tab INTO wa_tab.
   file_str1 = wa_tab-FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
   EXPORTING
     filename                      = file_str1
*    filename                      = '\\10.10.1.92\Volume_1\_projekte\Zeiterfassung-SAP\test.azt'
   tables
     data_tab                      = it_string
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.

Application "Icons" no longer showing up in Application Catalog

We have around 500 "Applications" in our application catalog, and make heavy use of the Application Catalog for user self installations. Additionally, we had painstakingly gone through and added "icons" to every application to show up
in Software Center/Application Catalog to make things look "pretty" This had all been working as expected for over a year up until yesterday.
We were rolling out a new App Catalog Website/Web Service (2 servers) to replace our current. I removed the roles from the old one, added to the new. Everything works, software installs work, but no icons show up in the App Catalog. They DO however show
up fine in Software Center. I then reverted the change, putting the role(s) back on the previously working server. No dice, still no icons.
Been playing with it for almost a week, here is what I can discern:
No Icons show up at all, whether custom icons, shell32.dll default icons, or other.
All types do show up in software center after an install is initiated.
The permissions on the "AppIcons" folder are correct (RO to domain users), but the folder itself is empty
No Errors reported on any Roles, or Services (all green)
Modifying an app (removing and re-adding icon) has no effect, still doesn't show up in App Catalog.
Making a NEW app (with new icon) has no effect, still doesn't show up in App Catalog.
Is anyone familiar with the "How do icons get onto the app catalog" process? I assumed they all dumped to the AppIcons folder, but maybe not? Does anyone know what process/log controls this?
Thanks in advance for any help/suggestions, as i want to make sure its not something stupid before blowing $$$ on a MS call.

Wanted to follow up and post a solution to this.
Working with MS support, we were able to identify it as a permissions issue.
Our implementation spans multiple domains, multiple forests, so we have to add in the additional Domains Users with permissions to the "ApplicationCatalog" and "Usericons" folders. I chose to do this via GPO as we have several app
catalog servers, and this seemed "more consistent" to me.
I mistakenly assumed that the privs were identical on both folders when I configured it in GPO. Though very similar, they aren't identical and there are a few extra privs for the SCCM account(s) on the UserIcons folder, which allows it to "write"
to that folder. Simple Fix. Whoops!
Working with MS, I learned a bit more about how the App Catalog works, that I haven't seen written anywhere, so I'll include some of that here. All icons are stored in the SCCM database, and are accessible via the primary site server and WMI. However,
they are "cached" on each application catalog in the appicons folder. This process doesn't happen on a schedule, but rather happens when a user opens the application catalog (on demand). Any icons not retrieved and cached, are cached at that time.
In my case, I had made the GPO change 6 months prior, but no "new" icons had been added, we had been reusing them from app to app (Firefox icon stays the same, and so on). Therefore, it appeared to still be working fine and all icons showed up. In
my case, When I rebuilt the server(s) they needed to "re cache" the icons. When I reverted the app catalog to the old server to revert the change, it also had to "re-cache" the icons as they were deleted when the role was removed, which
was denied.
Hopefully this will help someone in the future if they ever have a similar issue.

I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Cleaning the "cache" of internet sites (URL's) stored

How do I clean the "cache" of internet sites (URL's) stored on my computer?
Where are cookies stored?
I cannot find where these are stored, though a technician showed me once.

Under Safari's History menu select Clear History at the bottom of the listing.
To clear Cookies open Safari Preferences > Privacy and locate the button to clear cookies.
If you enable the Develop menu then you can empty all caches from it. Should find that under the Advanced icon in the preferences toolbar.

Application Catalog Site URL Auto Selection Producing Unexpected Results

Similar Messages

Maybe you are looking for