Application Compatibility does not update the database.

Hi,
I am using application compatibility manager 6.1, and SQL server 2012 as database. ACT run ok and it create the XML file but it does not update the database at "C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA" location.
I can see the valid XML file but somehow the MDF file of database is not updated so my ACT windows does not showing anything on it.
Any Help would be appreciated.
Thanks
Rakesh Patel
rakesh patel

Hi Rakesh,
I am not sure if you have resloved your issue.
But for helping others to know what to do if they meet the same issue as yours, I consider to mark the post as answered.
If you would like further assistance, please post back and we will be always here to help you.
Any concern about this mark behavior, you can just unmark it.
Thanks for your understanding.
Regards,
Kelvin hsu
TechNet Community Support

Similar Messages

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

The jar size value in the Application Descriptor does not match the real ja

Hi,
when i creat obfuscated package for my application It's posing the
Error preverifying class A
Class loading error: Wrong name
The jar size value in the Application Descriptor does not match the real jar file size.
It's perfectly working for all the other applications .I tried to change the jar size in the jad file but it's not working.

Yes, the obfuscator does not change the size value after finishing. You have to do it yourself.
Mihai

Approval Workflow does not update the Content Approval status if started automatically

Hi,
I’m using a simple Approval Workflow associated with
Content Approval on site pages. It works fine when I set it to be started manually (by using
Allow this workflow to be manually started by an authenticated user with Edit Item permissions
option) and on the completion of the workflow the
Content Approval status is updated accordingly. But when I set it to be started automatically (by using
Start this workflow when a new item is created
/ Start this workflow when an item is changed
options), it does not updates the Content Approval status. Note that I’ve set the
Update the approval status after the workflow is completed (use this workflow to control content approval)
option to true.
Regards

Hello,
It is recommended to select "Start this workflow to approve publishing a major version of an item" when you want to use the workflow to manage content approval for
a library.
According to the Notes for “Enable Content Approval” option in
this reference:
If you are using this Approval workflow to manage content approval (moderation) for a library, and you selected the Start this workflow to approve publishing a major version
of an item check box on the Add a Workflow page..
If you did not select the Start this workflow to approve publishing a major version of an item check box on the Add a Workflow page because you do not want this workflow to
be the default content approval workflow for a library, you can select the Update the approval status (use this workflow to control content approval) check box to make this workflow a secondary content approval workflow that specific users can
start manually.
That means having an approval workflow start automatically when a document is changed or created is not a good practice when you want to use the workflow to manage
content approval for a library. You should either select "Start this workflow to approve publishing a major version of an item" or give users the option to start the workflow manually at the time they want to submit for an approval.
Thanks & Regards.
Lily Wu

Your Application Set does not match the applications in your Retrieval Rule

Hi,
While creating the time card iam getting the error:Your Application Set does not match the applications in your Retrieval Rule Group.
Please Suggest the solution.
Thanks

In Our case, we created a new PERSON TYPE in HR and we forgot to add this type to OTL Preferences.
So in the above scenario:
Go to US OTL Application Developer -> Preferences ->
In the Eligibility Tab. add new row
Name of Rule => any unique name
Name of Branch => enter the name of an existing branch which the time card preferences are going to be the same.
Link By => We use Person Type... You can choose PERSON here but i would not know why you would want to do that
Linked To => Person Type you want to have this for
Precedence => Unique Number
From => make sure to enter an earlier date especially when people are required to enter older than todays timecard since this field defaults to today.
If you totally dont have or want to build a new preference, then you will have to go to the Preference Tab and create a new branch.
in ours, we have Timekeeper and TimeStore and Employees
in Timekeeper -> we have timekeeper timecard layout
in TimeStore -> we have approval style, entry level processing rule, time entry rule groups, timestore retrieval rule group
in Employees -> all we have is really those preferences we;d like to see. Date Format, Enter Negative Hours, Enter Override Approver, Number of Empty Rows, Timecard Delete Allowed, Timecard Layout, Number of Recent Timecards displayed, timecard status allowing edits.
Hope the above helps

Hi. I iMac, Mac OS X 10.6.8 Lately it does not update the program. Writes the following: "Unable to install the update iTunes. An unexpected error occurred." What you need to do that right, that programs can be updated again?

I iMac, Mac OS X 10.6.8 Lately it does not update the program. Writes the following: "Unable to install the update iTunes. An unexpected error occurred." What you need to do that right, that programs can be updated again?

you will have the most up to date itunes available for your os 10.6.8. to get a newer version you will have to upgrade to a newer os.

Updateing CustomXML scheema from sharepoint 2010 in VBA does not update the DIP (Document information panel)

I need to update a schema from Sharepoint with namespace
http://schenas.microsoft.com/office/2006/metada/contentType when i am opening a Word document. I am using VBA to do so. When i have made the Changes it does not update the DIP, not until i save the document.
Is there a way to update the dip using VBA.
/Ola
olha

Hi,
This is the forum to discuss questions and feedback for Microsoft Office client. For any VBA related issues, I would suggest you to post in related MSDN forum -
Microsoft Office for Developers, to get better support experience:
https://social.msdn.microsoft.com/Forums/office/en-US/home?category=officedev
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Reschedule does not update the schedule line

Dear All expert,
After upgrade to ECC6.0, the reschedule does update the schedule lines eventhough it list all the required to be update in the list.
As I checked , it update the ekpo successfully but does not update the eket.
Is there any suggestion ?

Hi,
On the initial screen of V_V2
Remove tickmark of SIMULATION, Then it will update schedule lines in sales document
Kapil

Console Application not updating the database

Dear all,
I am new to c# development. I have a console application front end in program.cs
I have a local database on visual studio.
When I execute the stored procedure locally on the database the data is getting updated in the database.
When I update the same through Console Application - the data is not appearing in the database.
Can somebody throw light on this? Where I am missing
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data;
using System.Data.SqlClient;
namespace AssetApp
class Program
static void Main(string[] args)
bool value = true;
while (value)
value = getdisplay();
//Console.ReadLine();
//value = false;
private static bool getdisplay()
Console.WriteLine("-------------------------------------- ");
Console.WriteLine("---------------------------------------");
Console.Clear();
Console.WriteLine("----------Asset Application------------");
Console.WriteLine(" 1 Company Asset ");
Console.WriteLine(" 2 Standby Laptop Register ");
Console.WriteLine(" 3 Scrap Register ");
Console.WriteLine(" 4 Purchase Register ");
Console.WriteLine(" 5 Service Call Report ");
Console.WriteLine(" 6 IT Helpdesk ");
Console.WriteLine(" 7 Exit ");
Console.WriteLine("---------------------------------------");
string input = Console.ReadLine();
switch (input)
case "1":
CompanyAsset();
break;
case "2":
Console.WriteLine("Standy Laptop Register");
break;
case "3":
Console.WriteLine("Scrap Register");
break;
case "4":
Console.WriteLine("Purchase Register");
break;
case "5":
Console.WriteLine("Service call Report");
break;
case "6":
Console.WriteLine("IT Helpdesk");
break;
case "7":
return false;
default:
break;
return true;
private static void CompanyAsset()
Console.WriteLine("------Company Asset------------------------");
Console.WriteLine("Type the Department Name");
string departmentName = Console.ReadLine();
Console.WriteLine("Type the First Name");
string firstName = Console.ReadLine();
Console.WriteLine("Type the Last Name");
string lastName = Console.ReadLine();
Console.WriteLine("Type the User Name");
string userName = Console.ReadLine();
Console.WriteLine("Type the Model Number");
string modelNumber = Console.ReadLine();
Console.WriteLine("Type the AssetTypeID");
string assetTypeID = Console.ReadLine();
Console.WriteLine("Type the SerialNumber");
string serialNumber = Console.ReadLine();
Console.WriteLine("Type the WarrantyStartDate");
DateTime warrantyStartDate = Convert.ToDateTime(Console.ReadLine());
Console.WriteLine("Type the WarrantyEndDate");
DateTime warrantyEndDate = Convert.ToDateTime(Console.ReadLine());
Console.WriteLine("Company");
string company = Console.ReadLine();
Console.WriteLine("EngineerID");
string engineerID = Console.ReadLine();
Console.WriteLine("ITHelpdeskID");
string itHelpdeskID = Console.ReadLine();
Console.WriteLine("EmpID");
string empID = Console.ReadLine();
//Handshake
SqlConnection myNewConnection = new SqlConnection("Data Source=.\\SQLEXPRESS;AttachDbFilename=|DataDirectory|\\AssetApp.mdf;Integrated Security=True");
//open the database
myNewConnection.Open();
//create command
SqlCommand myCommand = myNewConnection.CreateCommand();
//using the stored procedue to update the database using parameters add
myCommand.CommandText = "InsertAsset";
myCommand.CommandType = CommandType.StoredProcedure;
myCommand.Parameters.Add(new SqlParameter("@DepartmentName", departmentName));
myCommand.Parameters.Add(new SqlParameter("@FirstName", firstName));
myCommand.Parameters.Add(new SqlParameter("@LastName", lastName));
myCommand.Parameters.Add(new SqlParameter("@UserName", userName));
myCommand.Parameters.Add(new SqlParameter("@ModelNumber", modelNumber));
myCommand.Parameters.Add(new SqlParameter("@AssetTypeID", int.Parse(assetTypeID)));
myCommand.Parameters.Add(new SqlParameter("@SerialNumber", serialNumber));
myCommand.Parameters.Add(new SqlParameter("@WarrantyStartDate", warrantyStartDate));
myCommand.Parameters.Add(new SqlParameter("@WarrantyEndDate", warrantyEndDate));
myCommand.Parameters.Add(new SqlParameter("@Company", company));
myCommand.Parameters.Add(new SqlParameter("@EngineerID", int.Parse(engineerID)));
myCommand.Parameters.Add(new SqlParameter("@ITHelpdeskID", int.Parse(itHelpdeskID)));
myCommand.Parameters.Add(new SqlParameter("@EmpID", int.Parse(empID)));
int recordsAffected = myCommand.ExecuteNonQuery();
if (recordsAffected == 1)
Console.WriteLine("Successful your entry");
else
Console.WriteLine("Your entry is not successful");
myNewConnection.Close();
Console.WriteLine("");
Console.WriteLine("Press Enter to continue");
Console.ReadLine();
public static void StandbyLaptopRegister()
Console.WriteLine("-------------------------------");
Console.WriteLine("Select the Date & Time");
string DateTime = Console.ReadLine();
Console.WriteLine("");
ALTER PROCEDURE dbo.InsertAsset
@DepartmentName NVARCHAR(50),
@FirstName NVARCHAR(50),
@LastName NVARCHAR(50),
@UserName NVARCHAR(50),
@ModelNumber NVARCHAR(50),
@AssetTypeID INT,
@SerialNumber NVARCHAR(50),
@WarrantyStartDate SMALLDATETIME,
@WarrantyEndDate SMALLDATETIME,
@Company NVARCHAR(50),
@EngineerID INT,
@ITHelpdeskID INT,
@EmpID INT
@parameter1 int = 5,
@parameter2 datatype OUTPUT
AS
/* SET NOCOUNT ON */
BEGIN
INSERT CompanyAsset(DepartmentName,
FirstName,
LastName,
UserName,
ModelNumber,
AssetTypeID,
SerialNumber,
WarrantyStartDate,
WarrantyEndDate,
Company,
EngineerID,
ITHelpdeskID,
EmpID)
VALUES(@DepartmentName,
@FirstName,
@LastName,
@UserName,
@ModelNumber,
@AssetTypeID,
@SerialNumber,
@WarrantyStartDate,
@WarrantyEndDate,
@Company,
@EngineerID,
@ITHelpdeskID,
@EmpID)
/*RETURN @@IDENTITY*/
END
Cheers
Sathya

Hello,
Usually when I see
AttachDbFilename=|DataDirectory| ...
The database was added into the project via the IDE add new data source and if so make sure under the property window for the database that "Copy to Output Directory" is set to either the first or last option as the default "Copy always"
copies the database each time you build the project thus overwrites the last time you ran the project.
I would recommend the "Copy if Newer" which means the database is only copied if you make changes to the database. Set "Copy if newer", build run check results.
Of course this may not be the issue but may very well be too.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Software does not find the Database server

Hi all,
We are going to move database from old server MSSQL 2005 Express to the MSSQL 2008 R2 STD. For test I backuped DB from old server then restored at the new one. For some reason the software does not find the new server.
I checked everything as from the link described:
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx?Redirected=true
Also at the new server we have another production DB that is running without any issues...
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected
host has failed to respond 195.30.95.163:80
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at OptoWare.OrderEntry.OrderInterfaces.WebReferenceOWEdix.OWEdixService.OWEdix_GetStatus(String custID, String password, String countryCode)
at OptoWare.OrderEntry.OrderInterfaces.EdixInterface.b(Object A_0, DoWorkEventArgs A_1)
2014-03-31 16:54:58,924 [1] ERROR OptoWare.OrderEntry.Controls.Config.ServiceControl - Connetction to FI1-sv-prod014\mssqlserver failed.
System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured
to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at OptoWare.OrderEntry.Controls.Config.ServiceControl.i()

It looks like the connection is getting refused because of your application configuration.
Refer similar thread
http://forums.asp.net/t/1180127.aspx?A+connection+attempt+failed+because+the+connected+party+did+not+properly+respond+after+a+period+of+time+or+established+connection+failed+because+connected+host+has+failed+to+respond+
-Prashanth

Real time ROLAP or Automatic molap cubecube does not update the value

Hello Everyone,
I am working with Real time Rolap and Automatic MOLAP cube. I had created cube using AdventureWorks DW sample given by Microsoft Tutorial. when i fire insert query, It updates data. It works fine in both the cases after reconnecting in SSMS and SSAS browser.
But I have a one database table in SQL server with 4 varchar and 10 numeric fields [simple table with one primary key without any relationship with other table]. I tried to create both type of cube from direct database table [selecting varchar fields as
dimensions and numeric as measures], created partitions, specified server side tracking table. It processes the cube. but when i add rows into this table. It inserts record but does not update in SSAS browser or SSMS browser.
Please help me what is the problem???
Thanks in Advance!

I noticed the same behavior reported by Bob: Not regarding the "process filter" or the "update frequency" selected "CPU Time" column is only updated when details dialog is open. I noticed it just today (which triggered the search here), I wonder if this "feature" has been always present or maybe activity monitor is getting lazy?
Regards,
Mauro

The executible I build with the application builder does not function the same as my VI file.

I am using a USB 6008 device with the newest DAQmx drivers and Labview
8.2 to make analog voltage readings. Within my main VI I first
create a data folder in the same location as the VI using a property
node and then use case statements to call two sub VIs that create a
data file within the data folder and then collects data. When I use the
application builder to create an executible the resulting file does not
operate the same as the origional VI. The program appears to be
reacting to button presses on the GUI, but there is no indication that
the data folder is being created or that any measurements are buing
made. Are there any known issues that may account for this
anomily?
-Mike
Message Edited by TMBurleson on 10-16-2006 03:09 PM

Are you using the VI Path property, using a reference to the current VI?
I could be wrong, but if you're attempting to use a path relative to the current VI, I think that does indeed change in a built application. If your VI used to be C:\somewhere\foo.VI, then after building its path would actually be C:\somewhere\foo.EXE\foo.vi . Thus, if foo.VI used to try to make a folder like C:\somewhere\datafolder, the built application would be trying to make C:\somewhere\foo.EXE\datafolder , which wouldn't work.
This is sort of a shot in the dark, but does this sound like it might be the case?
EDIT: Dennis beat me to it.Message Edited by kehander on 10-16-2006 03:26 PM

FDF does not update the Formdata

Hello,
in php I wrote a a smal script to generate a fdf file but the form does not show the data. I am pretty sure that the code is correct and the fields exists in the pdf.
      // getdata.php
      $fdf_out='C:\PHPCode\Medi\results\test1.fdf';
      $pdf_doc='http://localhost/test2.pdf';
      $outfdf = fdf_create();
      fdf_set_value($outfdf, "Textfeld1", 'mein Text', 0);
      fdf_set_value($outfdf, "DatumsUhrzeitfeld1",date('Y-m-d H:i:s'), 0);
      fdf_set_file($outfdf, $pdf_doc);
      fdf_save($outfdf, $fdf_out);
      fdf_close($outfdf);
      Header("Content-type: application/vnd.fdf");
      $fp = fopen($fdf_out, "r");
      fpassthru($fp);
      unlink("test1.fdf");
after pressing the submitbutton (http://localhost/getdata.php#FDF). I can see a data tramsmission but no new data.
Could I have missed something? LiveCycleDesigner Option?
I there a way to debug the calling PDF to see what is being done?
thanks a lot, this is bugging me since 2 days now..
edgar

Since Adobe provides the ability to create AcroForms that uses the FDF file, it is hardly outdated. And there are many web applications that provide a copy of a user completed form in a pdf format that users with Reader can save by use of the FDF file to provide the data and the link to the associated PDF form.
AcroForms provide features that are not available to LiveCycle Designer forms or LiveCycle Designer needs to use the Acrobat object and Acrobat AcroForms JavaScript to use those features. XML forms can not be flattened nor can they obtain the properties of the identity object.
Both products are about the same age.
I would hardly consider this an outdated product just because there is a different approach.

Type 2 SCD -- does not update the old value.

I have following columns in the source table:
SSN, credit_score
In the target, I have following columns,
SK_ID, SSN, credit_score, flag
I am flagging the old credit_score as 'N' when updating the row and at the same time it is supposed to enter a new credit score with flag 'Y' in another row.
Second, If a row is completely new, It should be inserted with the flag 'Y'.
SK_ID is the surrogate key and SSN is the natural key, My trigger column is credit_score.
The problem is that when I run this type 2 mapping, it does not update anything but inserts the new rows only.
I have posted the screen shots at the following link.
http://www.box.net/shared/ea9v48r0xa
Thanks for your help in advance.

First of all, thanks for the reply...
You can also look at the screen shots I posted in previous post.
Here is how I am updating the rows (update logic).
If source_SSN=target_SSN and source_credit_score!=target_credit_score
then flag = 'N' (this is the update from 'Y' to 'N' after which i will insert a new row containing new value of credit_score with flag 'Y')
As an example, if my old rows in the target table were:
sk_id SSN credit_score flag
101 2212 654 Y
102 3023 707 Y
Now let's say my source table has these values.
SSN credit_score
2212 648
2220 690
Then my target table should be like this:
sk_id SSN credit_score flag
101 2212 654 N
103 2212 648 Y
102 3023 707 Y
104 2220 690 Y
Do you see what I mean...

When I sync my iPad with iTunes it does not update the play count? Is there a setting I need to change?

When I sync my iPad with iTunes it does not update my play counts. Is there a way to make this happen?

Are you using iTunes Match by chance? I had no problems whatsoever with play counts synching between any of my devices until I started using iTunes Match. I turned it off and magically my play counts synced. Once. Hasn't happened again though.

Application Compatibility does not update the database.

Similar Messages

Maybe you are looking for