Application component does not exist in source system

hello all,
I was check the datasources in RSA5 but i cant see any application component hierarchy ...
all i can see is unassigned nodes...and all the datasources are under these 'unassigned nodes'
Could anybody tell me why its like this and what we can do to fix it...
Thanks,
Kani

Run RSA9 to transfer it, and then you should see it in RSA5.

Similar Messages

  • Transport Error - DS does not exist in Source system

    Dear All,
    I am getting below Error while transporting the DSO from DEV to Quality.
    DataSource  8ZM_ALT  does not exist in source system  DCQCLI041 of version A.
    I have checked the dataosource is active and available in Development system.  But Its giving error while importing.
    As per the dataflow the data of this DSO is updated to Cube.
    Has anyone solved this issue, because i have checked in SDN but there are no suitable answers.
    Regards
    Sankar

    Hi,
    Your right I am transporting ZM_ALT Dso .  The following log of the error we are getting.
    DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
    Mapping between data source 8ZM_ALT and source system DCQCLI041 is inconsistent
    DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
    Field /BIC/ZM_AA will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_APPL will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_BEM will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_MOD will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NCDS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NDESC will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NES1 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NES2 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NIN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NPCS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NPN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Regards
    Sankar

  • DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of vers

    Hi iam working on BI 7 and ECC 6 system. When i try to install the transfer rules for 2 lis_11_vahdr in BI7 business content, it gave a message that "<b>DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of version A".</b> i have done an enhancement for this.I activated them from rsa5,  activated both in LBWE as well as activated thier structures too after enhancing. I replicated and did all possible steps still iam unable to find.
    Can anybody help me who has faced similar issue.
    Regards,
    Neil

    Hi Niel,
           Could you chek the RFC Connection of particular client.
    Thanks,
    Ram

  • DataSource 80SD_O03 does not exist in source system of version A

    Hi,
              While Activating the Standard DSOs i'm getting this "DataSource 80SD_O03 does not exist in source system of version A".
    Regards,
    Devi.

    Hi,
    Hope you followed the same in R/3
    Datasource:        Rsa5->RSA6
    BI Side:
    Rsa1->BI Content->Select Datasource->Installation->Replicating/Activating the DS
    And same procedure for Infoprovider too.
    Please analyze closely about the procedure, some where you are missing something.
    Regards,
    Suman

  • DataSource ***** does not exist in source system ***** of version A

    dear masters,
    i m new to BI i m creating one report in BI. for that i m taking the data from Excel file. for that i have created the source system
    and data source i saved and activated the data source. in data source preview i checked the data its coming properly as i given in
    excel sheet. after that i m creating the infopackage while creating it i m getting the error DataSource ***** does not exist in source system ***** of version A. i checked data source in RSA2 but in this it is showing The DataSource DS_PO85 does not exist in version A also i checked in RSA3 its showing The DataSource DS_PO85 does not exist in version A.
    pls help me how to overcome this problem.... where i m missing which setttings...
    regards,
    vicky

    Hi Vicky,
    Go to RSA1--> Data Source --> Find the data source (for which the load is getting failed)
    Now Change and activate the data source again.
    Both the status and version should be activated green.
    Also you can use the check button to check the DS.
    Thanks,
    Naween

  • Data source 80BP_ID does not exists in source system

    Hi All,
    I have just started with standard content for SD module.
    I activated my datasources 2lis_11_vaitm and 2lis_12_vcitm in my R3 system.
    After replicating these data sources in my BI system i went to BI Content to activate my Info sources.
    While installing info sources 2lis_11_vaitm and 2lis_12_vcitm i got  errors  namely
    Data source 80BP_ID does not exists in source system
    Datasource 80BP_REL not maintained.
    Can somebody pls suggest a way out.
    Thanks in advance..
    Regards,
    Rohit

    Hi Rohit,
    When ever you try to install the SD related Standard business content then it will automatically pick up the CRM related data. the 0BP_ID, these are related to the CRM.
    Please uncheck the unrelated objects while installing the STD content.
    you can select the option in the grouping as ONLY NECESSARY OBJECTS.
    Regards,
    Ravi Kanth

  • Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.

    I am trying to connect to SharePoint in my Office 365 environment by following https://support.office.com/article/Set-up-the-SharePoint-Online-Management-Shell-environment-7b931221-63e2-45cc-9ebc-30e042f17e2c and I am getting:
    Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.
    Is there some setting I need to change on the O365 side? Thanks.

    Hi,
    Based on your description, my understanding is that you want connect SharePoint Online using PowerShell.
    Please make sure that the following software is installed.
    Windows Management Framework 3.0
    SharePoint Online Management Shell
    And then, open the SharePoint Online Management Shell and use the Script below to test
    whether it works.
    $User = "[username]@[tenant].onmicrosoft.com"
    $Pass = "[password]"
    $creds = New-Object System.Management.Automation.PSCredential($User,(ConvertTo-SecureString $Pass -AsPlainText -Force));
    Connect-SPOService -Url https://[tenant]-admin.sharepoint.com -Credential $creds
    Get-SPOSite
    More information:
    http://blog.falchionconsulting.com/index.php/2013/01/using-powershell-to-manage-sharepoint-2013-online/
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found

    NOTE: This thread was started in the flash pro forum: http://forums.adobe.com/thread/898879?tstart=0 . However, because of adninjastrators recommandation, I open the thread here:
    Hello there,
    I have started a stream from Flash media encoder to flash media server. According to my encoder, it should be located at: "rtmp://localhost/live" and is called livestream.
    In the Flash  software I try and set the source of FLVPlayback component to "rtmp://localhost/live/livestream", and I get this error: "NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.". Both the server and encoder is runnind and I am encoding.
    Too, when I try and open the html with the stream in a browser, nothing appears.
    What should I check?
    Thanks.
    Kind regards,
    Marius

    Thanks for your reply.
    Server, encoder and player are all on the same computer.
    Admin console confirms the existence of "livestream" of type "Live" and a "NetStream" called "ABAF". No idea what the latter is.
    Also, thought I'd mention that I have to start the servers from the Control Panel -> administrative tools -> services. If I try and start the server from the start menu, they dont start.
    Thank you for your time.
    Kind regards,
    Marius

  • Cannot retrieve table metadata - Table does not exist: ODP source 0WRKCNT_CATG_TEXT does not exist

    Hi, when i able to import the 0WRKCNT_CATG_TEXT extractor into source system i am getting the above bug Cannot retrieve table metadata - Table does not exist: ODP source <0WRKCNT_CATG_TEXT> does not exist, i have been checked in RSA5 T code to check the object is active or not, its active and its available in ROOSATTR table with enabled mode,but still its showing the error, can anyone help on this ..

    Hi Airings,
    'ORA-00942: table or view does not exist'
    According to the error message, it seems that the migrating table or view does not exist in the database, or SSMA does not have access to it. To troubleshoot the issue, please check the following things.
     1. Verify that if the spelling of the table or view name is correct.
     2. If the table or view exists but is in a different schema from the current schema where the SQL is executing (in other word, the table doesn’t own by you, but owned by other user), the ORA-00942 error will return too. Resolve this by
    explicitly reference the table or view by specifying the schema name (schema_name.table_name).
    3. SSMA queries some additional catalog tables that you may not have permission to, please make sure that you grant the account permission to
     read sys.mlog$. For more details, please review this similar thread:
    Bug in SSMA For Oracle 6.0 for non-dba Oracle user.
    Reference:
    ORA-00942 Table or View Does Not Exist Oracle Error
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • Trip type does not exist in the system (T702G)

    Hi,
    In HR - Module - Travel Management.
    I am trying to create a travel request for an employee.
    i am getting the error message :
    Statutory trip type does not exist in the system (T702G)
    how to assign the trip type to a particular employee.
    regards
    sam

    If you are applying as employee you need to configure trip schema and single field control for webdynpro provided you are using webdynpro application as employee.
    there in the tri provision variant you need to enter the variant you have created.
    Under that select the travel planning trip schema PL.
    on right hand side you have a field trip schema: statutory where you need to select appropriate schema from drop-down.

  • Warning: Index does not exist in database system MSSQL

    Hi,
    After activating the Index from SE11,
    I receive the following Warning:
    Index does not exist in database system MSSQL.
    What does this mean? Has performance been increased or does the index 1st have to exist in the database system MSSQL?

    When you create index at SE11 and you need activate database utility.
    utilitities-database utility->then click activate and adjust database.
    else you can use SE14 and so that Index will create databse level.
    Reward Points if it is helpful
    Thanks
    Seshu

  • Index does not exist in database system ORACLE??????

    Hi Experts,
    I created a Secondary Index in DEV, its fine and the message is,
    <b><i>Index KNA1~Z01 exists in database system ORACLE</i></b>
    I moved it to TEST and there I got the message is like,
    <i><b>Index does not exist in database system ORACLE</b></i>
    So,
    1 - Wht I hv to do now? Shuld I see BASIS people?
    2- Why its happened like that? Coz of not enough space?
    ThanQ.

    thanq sudheer,
    I got the return code as 4, so Can I go for creation of new request and there by moving to test?
    1 - Anyways, so, after Activating Seconadyr Index, Shuld I come back and Do I need to activate the Table also?
    or
    2- Just activating the index is enough?
    thanq.
    Message was edited by:
            Srikhar

  • Index does not exist in database system DB6 sap

    Hi All
    In development system i have added a field into already existing  index and activated successfully without any errors or warnings and after transported the TR  into Quality system,In Quality system it shows the warning Index does not exist in database system DB6 sap
    Thanks
    Vamsi

    Hi Mohan,
    After any change in the existing structure of the table you need to adjust and then activate it.
    It can be done using SE14 tcode, please try using this.
    Regards,
    Mohammed

  • Index Does Not Exist In Database System MSSQL

    Hello,
    I have an Index that has this message:
    " Index Does Not Exist In Database System MSSQL"
    Can someone guide me how to update Index to the database?
    Thank you.

    Check this thread:
    missing primary index
    Otherwise, a few more informations would help! Thanks.

  • Index does not exist in database system DB6

    Hi,
    Problem : <b>Index does not exist in database system DB6</b>.
    I need further explanation why when i transport index from Development Client to Production Client the index is active but does not exist in database system DB6.
    So when the cases is occurs i must re-create the index again in Production Level...
    Can someone give me some ideas?
    Thanks.

    Hi,
    it might be due to some BUG in RDBMS...
    First Check the Secondary index in TEST system
    Look at the Transport Number in DEV system, If this is having error, then it will show you the error details also,
    If that not moved Properly then you need to create another request for the INDEX and move it again
    See the threads with similar problem...
    Warning: Index does not exist in database system MSSQL
    Index does not exist in database system ORACLE??????
    Re creation of database index
    Hope it will solve your problem...
    <b>Reward Points if useful</b>
    Thanks & Regards
    ilesh 24x7

Maybe you are looking for