Application component Hierarchy Transfer from Dev to QA

HI,
We need to transport the application Component Hierarchy from r/3 dev to r/3 qa .
when we select the datasources and click the transport button it does not show up a transport request.
when i tried to run RSA9 transaction in r/3qa it does not get executed and says " no changes allowed" as the system is locked . Our r/3 qa is locked so that no changes are allowed in the system as testing is under progress. our application component hierarchy looks blank with no data sources .
Is there any work around so that i can transfer the application component hierarchy in r/3 qa so that i can replicate the datasources on the bw side or should we open the client and run the RSA9 transaction so that the application component hierarchy is visble and replication can be done on the bw side.
I can only transfer Data sources from Dev to QA. Since I am not able to transfer the "Application component hierarchy" I cann't replicate the Data Sources into BW.
Thanks in advance for your advise.
Regards,
Mani

I believe the problem is that your app comp hier is not assigned to a package. You need to change this from $TMP to some other package. You can do this using the transport organizer tools transaction SE03(Change Obj Directory Entries). The object type is dsaa. If you search RSA9 in OSS I think you'll find some mention of this.
good Luck

Similar Messages

Urgent:Application component hierarchy is not available in BI

Experts!
I want to extract data from r/3 to bi,
I 've activated appln comp hier from sbiw,n activated datasourses as well in R/3
when i want replicate data sourses in BI, there is no appln comp hier in BI
if i double click on sourse system in rsa1,it should display data sourse tree,but this is not happening,
My ques is whatis the problem, do i need to check any other settings,
please provide me right solution,
I 'll assign points
Note: i "ve searched the forum but i could not get the right ans for my prblm
Thanks n Regards
Gagan

Use the transaction code RSA9 in R/3 inorder to transfer application component hierarchy this step needs to perform first.
Use tcode RSA5 to activate the data sources then do the set up necessary in r/3 and after wards replicate.
check this link
http://help.sap.com/bp_biv335/BI_EN/index.htm
regards,
shahid
Message was edited by:
Shahid Syed

Error: No valid application component hierarchy exists in RSA5

Hi Gurus,
We have recently installed SAP R/3 for BW. when i get in to RSA5 i am getting error message "no valid application component hierarchy exists" . Do i need to do any settings here. When click enter later on, i can see all the data sources under new_hier_root.
And under new_hier_root i have unassinged notes
New_Hier_root -> unassigned notes -> application components.
Thanks in Advance,
Jameel

Jameel,
first we need to transfer application hierarchy.
try this one SBIW>Business Content DS>Transfer Application Component Hierarchy or RSA9.
Hope this help.
Regards,
Nagesh Ganisetti.

How to transport Application Component Hierarchy of source system

Hi,
Our BW pulls data from CRM.
In CRM Development, all content/generic datasources are placed under specific nodes in Application Hierarchy which I can see in RSA6.
But all these datasources exist under NODESNOTCONNECTED node in CRM-Quality !!! How can I transport application component hierarchy ??
Any idea?
Regards,
Vikrant.

If your application component hierarchy is assigned to local object then first you need to change the package.
Go to TCode: SE03
For Object Type Selection use: DSAA
Object: APCO
Now change object directory from $TMP to the one being used in your porject.
Also check OSS notes:
542454
382471
For changing the paackage:
Go to TCode: SE03
Select option Change Object Directory entries (Under Folder Object Directory)
In the next screen you box Selection by Object you look for the 1st emptly line
Or you can also click on create object directory button
In the Object type box (Small box for 4 chars) type in DSAA or you can also do F4 and find it..
Then in the box next to it you put in the Object Name
In this case it should be APCO (if this does not work try apco_merged)
Select it and hit execute...
OR
try se09 - choose workbench request - cursor position on request, menu - request/task->object list->include object->freely selected objects
under 'selection by type and name' choose 'selected', mark the checkbox on last blank line, and give 'dsaa' and *
in next screen, cursor on 'apco' and click icon 'in request' (include in request), do the same for 'apco_merged'.
release the request and transport.

Unable to view complete Application Component Hierarchy.( Its Urgent)

Hi,
While creating Datasources with RSO2, I am selecting Application components, In the Application Component Hierarchy, I am unable to view the complete Hierarchy, ie subtrees are not available .
Say Under PA-> PA-PA-IO is visible . ie All subtrees are missing under this application component, Including transaction data sources under PA and also Master Datasources under PA-PA-IO. Like this all subtrees under each application components are not visible.
I have checked the Datasources delivered by SAP ie using RSA5 . Here all Application components are available including subtrees.
I have tried with RSA9 tried to transfer the Application component hierarchy but invain.
Please help me in this regard. Its very Urgent.
Thanks,
Jaswantha

You can rename your <JDev_Home>\jdev\system to <JDev_Home>\jdev\system_backup, f.ex.
But it means you will lose your preferences, DB connections, ...
Regards,
Didier.

Missing Application Component Hierarchy for source system

Hi
I have a problem I hope you can help me with.
We have created a sandbox as a copy of an existing APO/BW production system. On this system we have created 2 source systems: 1) R/3, 2) The system itself (EAX).
The R/3 source system seems to work fine, but there is a problem with EAX. First time i opened the system I was met with the message "Application component hierarchy does not exist, Create?". Nothing happened when choosing create.
After reading through similar topics on this forum, I went into RSA6. The view in here is similar to that on production, so I saved and tried again. Now it does come up with a tree, but it only has one node (NEW_HIER_ROOT(No Text Found)) and no datasources.
I then tried to transport the Application component hierarchy" from the production system. That didn't solve it either (still looks the same).
Does anyone know how to fix this? It would be much appreciated.
Br Karsten

Dear Karsten, Use transaction RSA9 for transfering appln. component hierarchy in source system.
let me know if you have any issue.
mahantesh

Allocation of Info sources to Application Component Hierarchy

Hi Friends,
I have to allocate Info sources zo other nodes of application component hierarchy as they are allocated now.
Is there a way to do this benath 'Drag and Drop' in RSA1 ?
Or can someone tell me the name of the table where this relation is stored ?
Thanks and regards
Joe

Hi,
U just drag and drop the required ISs to the rquired application component hierarchy. I have no idea about the Table where it maintains the relation between the ISs and the application componet hierarchies.
Hope this helps u....
Regards
Ramakrishna Kamurthy

Transport Application component hierarchy problem

Hello, I need to transport the App Comp Hierarchy, in our R3 when i do RSA9 it asks for package, but in our ICH and SRM box it didnt prompt the request. I've read the previous posts where create a request and assign a objects manually
as in note 382471
R3TR DSAA APCO
when i try to do this either in our Customizing or ABAP client i get this error..
any idea?
thanks
Error msg below:
Repaired objects cannot be included in dev./correction CD5K900190
Message no. TK180
Diagnosis
In developments/corrections, it is only possible to lock and edit those objects whose original version is located in the logon system.
The object list of your correction contains the object R3TR DSAD APCO. This object is only available as a copy, its original is located in another SAP System.
System Response
The function terminates.
Procedure
Delete the object from the correction before you repeat this function.
Use a repair for changes to this object.
You can assign repairs and corrections to the same request to ensure, for example, that they are part of the same transport.
For more information on the Transport Organizer, see the SAP Library under Basis Components -> Change and Transport System.

Hi Mayil,
Logon on to ur development system go to RSA9 then it will pop up u the screen to transfer the application component yes or no , u say yes then it will ask for the package name ,give the package name which u have already created ,
then go to se09 & relase the request ,now logon in to other system eg: - quality system ask u basis person to import that request in to quality

Applications didn't transfer from old hard drive to new hard drive

My MacBook Pro recently got water damage but I managed to save the hard drive. After purchasing a new MacBook Pro I used Migration Assistant to move the contents from my old hard drive to my new one. Everything transferred except for a few of my applications such as Adobe Lightroom, Microsoft Word, which are the more important ones that are harder to replace, as well as my apps from the app store which isn't a concern. Since I do not want to purchase Microsoft Word again or go through the hassle of getting Lightroom back on here I was wondering if there is a simpler way to transfer these?
Thanks

Zlig said, "Hi, you should be able to do this no problem. You can go for an inexpensive USB2 enclosure and use "Migration Assistant" to import your stuff across during setup of the new machine."
No, don't use Migration Assistant from a PPC to an Intel Mac. See Basic Guide to Migrating to Intel Macs here:
http://discussions.apple.com/thread.jspa?threadID=435350&tstart=10

Applications Will Not Transfer From iTouch To Itunes

Bassicly itunes wont transfer my recent purchases from my iTouch to its library.
I connect my iTouch, right click on it and select transfer purchases.
It starts doing it and starts going through the names of my most recent purchases. It only spends about 2-3 seconds on each name before going onto the next one.
And then it ends. It only goes through about 20 applications, its going through the names of the applications i want to move over, but it wont transfer them.
Its nothing to do with my computer being authorized, as it is with both my account and my dads, which covers all the apps.
I tried transfering my purches to my dads computer, but same problem there.
I also tried turning it off and back on. And holding the lock button & home button together until the apple icon comes up.
But neither helped.
I hope you can help
Thank You
Miguel

Yup, i was originally using one of the thin new cables, and then i tried one of the old fat cables, Neither worked.
Well there arent any transfers besides apps, although back up seems to work.
I cant restore my ipod otherwise i lose these games ive recently bought

Applications won't transfer from ipod to itunes

I recently got a new computer and I'm having trouble with transferring the applications. Whenever I click transfer purchases from ipod to itunes, nothing happens and when I go into the itunes store logged into my account and try to download previously bought applications, it makes me repurchase it. How can I transfer the applications in my ipod touch to itunes?

Have you authorised your new computer? Purchases will only transfer to a computer authorised to play/use content from the account the purchases were made from. These links may be of some help:
About iTunes Music Store Authorisation and Deauthorisation
Copying iTunes Store purchases from your iPod or iPhone to a computer
How to redownload purchased applications from the App Store

How to change the name of HFM EPMA Application while migrating from dev to

We have HFM EPMA application in Dev env on 11.1.2.2. We want to migrate aplication to production environment with different name. We are using Life cycle management to migrate the application. I know life cycle management but do not know how to change the application name during migration.
As we have EPMA application so copy utility will not work. Please helop.

Hi ,
You could use the Copy app utility to migrate the application from Dev to Prod.You could have your desired app name while setting up the copy process.
The EPMA application from Dev will be converted to an Classic application in Prod after the copy.
Then you might need to use the "Transform Classic to EPM Architect" and convert it to an EPMA application.
So your Application with the data from Dev will be moved to Prod.
To Navigate ,
Launch Workspace
Navigate ->Administer->Transform Classic to EPM Architect
Thanks and regards,
Gunasekaran rayar
Edited by: Gunasekaran Rayar on Nov 28, 2012 5:04 AM

Component Hierarchy RSA9 and DataSources RSA5

Hi Gurus,
I'm a little confused about configuration of source system...
In development ERP I have activated Component Hierarchy using RSA9 and also installed Business Content Extractors - RSA5 - All works fine.
But Now I want to transfer this settings to the Quality Assurance ERP system and I do not know how... ?
When transferring component hierarchy and installing datasource in dev system didn't ask me about transport request, I did not defined any requests for this operations... how can I transfer now all this settings to the other QA system??
Looking forward for reply.
I don't hesitate adding points

I called the RSA9 again - system asked "Transfer Component Hierarchy" i clicked "YES" and message appeared "The application component hierarchy was transferred from the Content". There was no chance to defined transport request.
I rsa6 i have choosen exactly one datasource and then the button "Object directory". Window appeared with the package name and I pushed the button "Save" and also no chance to define TR. The window just disapeared

SAP R/3 application component issue

Hi all,
My issue: SAP R/3 application component hierarchy node in RSA6 got saved in $TMP package as local object. When iam transporting the request from Dev to QA this hierarchy is not getting transported and all the application components in ECC QA are assigned under not defined node as individual node.
Not only this when i replicate the data sources in BI side in QA these data sources are replicated but come under unassigned nodes because of the missing main node.
So can any body help me in removing this main node from the $TMP folder and save this in a transpotable package to transport that to QA ECC and the same to replicate in BI.
Regards,
Prabhakar.

Hi Markus,
This issue iam facing in ECC side. Unless untill i transport this application component hierarchy all my application components in ECC QA will be under a not defined nodes.
So please suggest me the approach to resolve this issue.
Regards,
Prabhakar.

Can not create an Application Component on SAP R/3 system

I have a source as SAP R/3 ( ECC 6.0 ) and Target as SAP BW 7.0
a)Log on to SAP BW 7.0 and used the ID3CLNT400 source system , by using Modeling --
> Source System -- choose Customizing Extractors from the context menu of the source system ID3CLNT400
In the transaction SBIW on the SAP Source system , choose the Business Information Warehouse -- > Post Processing of DataSources
 > Edit DataSources and Application Component Hierarchies.
Choose the IMG Activity Here , I am getting one warning.
"NO Valid Application Component Exists"
When I hit the continue button .
Here when I create an Application Component and SAVE the changes, I am getting the following error.
Package "Z_Train" doesnt exists. Chose "Display Object " or "Cancel"
Because of this , I couldnt creat an Application component and also couldnot load any thing on the SAP BW side. Also , I am no way connected to the "Z_TRAIN" Package

can u pls tell me how u solved it
I am working on Production system when I go to rsa5 it displaying the msg
No valid application component hierarchy exists
Message no. R8053
Diagnosis
Currently no application component hierarchy ("APCO_MERGED", database table RODSAPPL and RODSAPPLT) exists in the system. This is required in BW so that the DataSources can be displayed correctly in the source system tree.
Procedure
Copy the application component hierarchy from the Content using transaction RSA9.
In development system I went to RSA9 & transferred the application componet then its asks or pkg name I have given the pkg name also before use the datasrcs , I have transported the same thing to production before transporting the datasrcs but in production the application component herarachy did not get transported I think that why its giving the msg No valid application component hierarchy exists but my datasrcs got transported ,pls suggest me what has to be done
Should I import the same request in to production again
Or shall I run rsa9 again & transfer the application component hierarchy again & transport it to production id I do this will already transported datarscs have any effect in production

Application component Hierarchy Transfer from Dev to QA

Similar Messages

Maybe you are looking for