Application crashes create kernel panic in startup

Hi, as I understood when an application crashes in the next boot up it will give a kernel panic, this is somthing I have experienced only after I upgraded to mountain lion, is there any logical reason that will create this ?
Thanks
K.

Sun Dec 9 10:17:25 2012
panic(cpu 0 caller 0xffffff8002cb7bd5): Kernel trap at 0xffffff8002c2d507, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0xffffff803d5d5000, CR3: 0x000000000593d000, CR4: 0x0000000000000660
RAX: 0xffffff8009955aa0, RBX: 0xffffff8009955aa0, RCX: 0xffffff80422d3fc0, RDX: 0xffffff80422d0000
RSP: 0xffffff80422d3e00, RBP: 0xffffff80422d3e40, RSI: 0x01ffff800994baa0, RDI: 0xffffff8009955aa0
R8: 0xffffff8009955aa0, R9: 0xffffffffffffffff, R10: 0x00000000ffffffff, R11: 0x00000000ffffff80
R12: 0xffffff80032bebe8, R13: 0x0000000000000000, R14: 0x01ffff800994baa0, R15: 0x0000000000000000
RFL: 0x0000000000010086, RIP: 0xffffff8002c2d507, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffff803d5d5000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80422d3aa0 : 0xffffff8002c1d626
0xffffff80422d3b10 : 0xffffff8002cb7bd5
0xffffff80422d3ce0 : 0xffffff8002cce4ed
0xffffff80422d3d00 : 0xffffff8002c2d507
0xffffff80422d3e40 : 0xffffff8002c2e74f
0xffffff80422d3ec0 : 0xffffff8002c2da0c
0xffffff80422d3f00 : 0xffffff8002c1c7f7
0xffffff80422d3f20 : 0xffffff7f83d345bb
0xffffff80422d3f40 : 0xffffff7f83d2da93
0xffffff80422d3f60 : 0xffffff8002c3dcde
0xffffff80422d3fb0 : 0xffffff8002cb26b7
      Kernel Extensions in backtrace:
         com.apple.driver.AppleUSBHub(5.2.5)[A70C7553-FFEA-355F-A292-6E2B0023FADD]@0xfff fff7f83d2b000->0xffffff7f83d45fff
            dependency: com.apple.iokit.IOUSBFamily(5.4.0)[C3094550-7F58-3933-A4F7-CD33AE83F8B9]@0xffff ff7f83386000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: ****************************************
Kernel slide:     0x0000000002a00000
Kernel text base: 0xffffff8002c00000
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 1093449822
last loaded kext at 283903802: com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0 (addr 0xffffff7f84b3c000, size 20480)
loaded kexts:
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.driver.AppleUSBHub          5.2.5
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.nvenet          2.0.19
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleUSBOHCI          5.2.5
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

Similar Messages

Recurring Kernel Panic on startup, pls advise

Can I get some advice on how to diagnose a persistent kernel panic on startup?
About this Mac
Version 10.4.11
Processor: 1.67GHz PowerPC G4
Memory: 1.5GB DDR SDRAM
(PowerBookG4)
panic(cpu 0 caller 0x002E1EC4): Unable to find driver for this platform: "PowerBook 5.7".
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0X00095A10 0X00026898 0X002E1EC4 0X002C12A0 0X002C1AD0 0X002C20DC 0X000A9714
Proceeding back via exception chain:
Exception state (sv=0x00BFF500)
PC=0x00000000; MSR=0X0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
XCP=0x00000000; (unknown)
Kernel version
Darwin Kernel Version 8.11.0: Wed Oct 18 10:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
No debugger configured - dumping debug iformation
MSR = 00001030
Latest stack backtrace for cp 0:
Backtrace:
0x000954F8 0X00095BF8 0X002E1EC4 0X002C12A0 0X002C1068 0X002C1AD0 0X002C20DC 0X000A9714
Proceeding back via exception chain:
Exception state (sv=0x00BFF500)
PC=0x00000000; MSR=0X0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000;
XCP=0x00000000; (unknown)
Kernal version:
Darwin kernel version 8.11.0: Wed Oct 10 15:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic: we are hanging here...
-The PowerBookG4 starts up when selecting the local hard disk via Startup Manager (press and hold Option key); PowerBookG4 starts up when inserting the install disk 1 and selecting the local hard disk via Startup Manager (press and hold C key); PowerBookG4 starts into safe mode (press and hold Option+Shift keys).
I have verified and repaired disk permissions and the disk itself. This behavior occurs consistently with or without external devices connected.
I can work in my applications ok and everything appears to function as expected once I get the PowerBookG4 booted, but I am concerned about how long it may continue to function - got a lot to do!
Advice? very appreciated thank you! -ben
Message was edited by: Bendervish
Message was edited by: Bendervish

Understanding crash logs isn’t easy and it’s hard (sometimes impossible) to decipher the cause of the problem. Take a look at Apple’s Crash Reporter document at http://developer.apple.com/technotes/tn2004/tn2123.html
Also look at Tutorial: An introduction to reading Mac OS X crash reports
http://www.macfixit.com/article.php?story=20060309075929717
Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. Since you've disconnected external devices, USB & Firewire don't appear to be a problem. Are you using an external mouse?
Have you added RAM recently? To eliminate RAM being the problem, Look at this link: *Testing RAM* @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
Look at 12-Step Program to Isolate Freezes and/or Kernel Panics
 Cheers, Tom

Known issues with CUDA 5.0.17 driver (including crashes and kernel panics) on Mac OSX

We have recently learned of some issues with the new CUDA drivers from Nvidia that cause crashes and kernel panics in some circumstances, including when switching between applications that use the GPU.
See this page for details.

Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

DVD drive broken, Mac G5 having kernel panics at startup

After nearly 5 years of steady, trouble free use, my G5 iMac started acting up a few days ago. I get what I think are kernel panics at startup. I am usually able to get it running after a few restarts but I am worried. My DVD drive became unreliable a month after my 1 year warranty expired. For some reason it won't start up with the install disks that came with the cpu but will bootup from my DiskWarrior DVD. I tried rebuilding the directory with DiskWarrior but I got the blue screen when it was almost finished. I've decided to do and Archive and install because I'm sure my problem stems from programs I installed recently. Is it possible to do the Archive and Install from my Intell Powerbook which is running the same version software. I've tried it several times, inserting the iMac install disk on my PB with my iMac connected in Target Disk mode, but I keep getting the message that the software can't be installed on this computer (the PB). Is there another way I can perform an A&I, I don't have enough space on my iDisk to use SuperDuper to create a disk image. I'm almost at the panic stage here since I use my computer for work and I'm afraid it won't start up at all at some point.
I've performed all the usual steps, repair permissions and used Disk Utility on my Firewire connect PB to repair the disk. One odd thing is FontExplorerX all of a sudden quit on me two days ago (which has never happened in the 4 years I've used it) and told me to download it again, which I did.
Message was edited by: e. jones

Hi e. jones, and a warm welcome to the forums!
Other way around, with the iMac's Install Disc in the PB, boot the PB into T mode, boot the iMac with the Option key held down, wait for the Install Disk in the PB to show up as a boot option on the iMac.
But I think you have more serious problems. And, first you need to move some things off the iMac to make room for an A&I, you really need an external FW Drive right away.

Kernel panics on startup on a MB late 2008

Hi everyone.
After reading dozens of threads about kernel panics I couldn't find any appropriate post.
So you see, I've got a unibody MacBook late 2008 and as the thread name states I'm experiencing kernel panics on startup. The weird thing is, these panics occur totally random and I can't induce them. Usually I have an apple keyboard, apple mouse and a WD 1TB drive (TimeMachine backup) connected via USB plus an external monitor and magsafe power. Even after disconnecting all that stuff I receive kernel panics.
I haven't had any kernel panic during normal operation so far. As soon as I get the system up and running nothing happens. They just keep coming every second or third startup.
There are 9 crash reports in my L/Logs/Diag.Reports. You can see the last kernel panic report here:
Tue Jan 22 16:00:04 2013
panic(cpu 0 caller 0xffffff80102b7bd5): Kernel trap at 0xffffff7f9124f578, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0xffffff80f1c3e000, CR3: 0x0000000012eae000, CR4: 0x0000000000000660
RAX: 0x00000000164aae3d, RBX: 0x01ffff8022416000, RCX: 0x0000000080a4a2ab, RDX: 0x0000000000000000
RSP: 0xffffff80f7443e50, RBP: 0xffffff80f7443e60, RSI: 0x0000000000000002, RDI: 0xffffff8010801ef0
R8: 0x0000000000000001, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8022416000, R13: 0xffffff8022038100, R14: 0xffffff80223d6100, R15: 0x0000000000000001
RFL: 0x0000000000010246, RIP: 0xffffff7f9124f578, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffff80f1c3e000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f7443af0 : 0xffffff801021d626
0xffffff80f7443b60 : 0xffffff80102b7bd5
0xffffff80f7443d30 : 0xffffff80102ce4ed
0xffffff80f7443d50 : 0xffffff7f9124f578
0xffffff80f7443e60 : 0xffffff801063181b
0xffffff80f7443ea0 : 0xffffff801063133e
0xffffff80f7443f30 : 0xffffff801062d2d0
0xffffff80f7443f70 : 0xffffff8010631e99
0xffffff80f7443fb0 : 0xffffff80102b26b7
      Kernel Extensions in backtrace:
         com.apple.driver.AppleUSBOHCI(5.2.5)[1C94C4BC-B05C-36D4-B1A2-B0BE04A5C620]@0xff ffff7f9124e000->0xffffff7f91260fff
            dependency: com.apple.iokit.IOUSBFamily(5.4.0)[C3094550-7F58-3933-A4F7-CD33AE83F8B9]@0xffff ff7f910f8000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f908af000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x0000000010000000
Kernel text base: 0xffffff8010200000
System model name: MacBook5,1 (Mac-F42D89C8)
System uptime in nanoseconds: 1060195299
last loaded kext at 357954763: com.apple.driver.XsanFilter    404 (addr 0xffffff7f91ea4000, size 20480)
loaded kexts:
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.2.2
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.driver.AppleUSBHub    5.2.5
com.apple.driver.AirPort.Brcm4331    602.15.22
com.apple.driver.AppleAHCIPort    2.4.1
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.nvenet    2.0.19
com.apple.driver.AppleUSBEHCI    5.4.0
com.apple.driver.AppleUSBOHCI    5.2.5
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleACPIButtons    1.6
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.6
com.apple.driver.AppleAPIC    1.6
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.iokit.IOAHCISerialATAPI    2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
com.apple.iokit.IOUSBUserClient    5.2.5
com.apple.iokit.IO80211Family    500.15
com.apple.iokit.IOAHCIFamily    2.2.1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOUSBFamily    5.4.0
com.apple.driver.NVSMU    2.2.9
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.8.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    344
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.6
com.apple.iokit.IOPCIFamily    2.7.2
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0

I'm not an expert at reading panic logs but nothing you posted jumps out at me. Since you still get the panics with everything disconnected I would try repairing your hard drive with Disk Utility and reinstalling Mountian Lion.

10.6.8 kernel panic at startup (fixed)

**excuse my english since I'm french**
Like a lot of people, I've installed 10.6.8 through software update. And I've experimented kernel panic at startup. So, I unplugged everything (my two USB hubs with multiple peripherals) except the original Apple keyboard and Apple wired mouse. And restarted in safe mode. Downloaded Apple 10.6.8 combo update, install it and restart. Everything went fine. Great.
But as soon as I plugged back my USB hub, kaboom! here's come the Kernel Panic again.
So, one by one, I plug and unplug my peripherals. To discover that my old optical wired two button mouse (love that mouse ;-))) was THE problem. Even when it's plugged directly in one of the USB port on my Mac Pro. I've try with three different optical USB wired mouse, one Logitech, one Dell and one Verbatim (my old mouse): kaboom! Kernel Panic. With my Microsoft optical wireless mouse? No kernel panic. 10.6.8 crashes only with third partys wired mouses, except the Mac wired mouse.
Voilà.
So, I'm stuck with the old wired Apple Mouse (that I hate). But no more kernel panic.
Hope my story can help someone.
And Apple, I missed my optical two buttons wired mouse. ;-))

I have the same problem, but only on one of the two iMacs that I updated to 10.6.8.
The first installation went smoothly, and I haven't had any trouble with the mouse or anything else on that iMac. A Samsung color laser printed continues to work just fine.
The second installation seemed to have a hiccup -- after I had authorized the update there was a second update screen. That sequence finished with a kernel panic, which continued through several attempts until I unplugged the Logitech laser mouse.
That Logitech mouse works perfectly on the first updated iMac, and the other Logitech mouse from that computer causes a kernel panic on the troublesome iMac.
I'm now using an Apple bluetooth mouse, which I'm getting used to - but I would still prefer the option of my good old Logitech mouse.
Another problem is that I can't print to a networked Konica-Minolta bizhub C451. Tried the combo 10.6.8 updater and reinstalled the Konica driver -- but still no dice.

Early 2006 iMac Kernel Panics on startup

We have recently purchased a second hand 20" iMac, and after a few days it has started to kernel panic on startup, before the Apple logo disappears. A whirring when it begins to turn on has also appeared.
I shall photograph the kernel panic message if it helps. The local Apple Store have suggested that since there is a greater time period before the Apple Logo appears, the fault might be something to do with the motherboard/hard drive. Are there any suggestions here which may help us?
Thank you.

KimGale wrote:
The kernel panic occurs before I can log in.
here's some to read up on:
_*Resolving Kernel Panics*_ and here _*http://support.apple.com/kb/HT2546*_.
for OS X 10.6 specifically, see this: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8965.html.
also
_*What is a kernel panic*_,
_*Technical Note TN2063: Understanding and Debugging Kernel Panics*_,
_*Mac OS X Kernel Panic FAQ*_,
and
_*Tutorial: Avoiding and eliminating Kernel panics*_
The disk is in there, and now we can't get it out
FWIW,
Kappy wrote:
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject.
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
JGG

Known issues with CUDA 5.0.17 and 5.0.24 driver (including crashes and kernel panics) on Mac OSX

We have recently learned of some issues with the new CUDA drivers from Nvidia that cause crashes and kernel panics in some circumstances, including when switching between applications that use the GPU.
See this page for details.

You are experiencing a page fault (reference to an area outside of what is owned by the software in question) in the AirPort driver, in a Mac OS X kernel that does not have obvious third-party modifications to it.
This should not be happening. Your Mac OS X image may be Bad.
If you do not already have a Trusted Backup, that should be your Top Priority.
If this is a new MacBook, and it is within the first 90 days of ownership, contact telephone support and ask them to help you. They will likely suggest a re-Install, right over the Mac OS X you have in place now. This is intended to do no damage, but you should always have a Backup.

Kernel panic on startup

Kernel panic occurred on startup last week. Since then have tried the following-
Removed all periferals apart from Apple keyboard and mouse.
Tried each of the 512Mb ram chips on their own.
Booted from and ran successfully-
DiskWarrior - clear
System Disc, Disc Utilities - clear
Tech Tool Pro - clear
Apple Hardware test - clear
Ran Memtest on ram, came out OK
Wrote zeros to hard disc then installed a new OSX 10.4.6. Still get kernel panic on startup.
Checked LED's on logic board while starting up from internal start button. 3 light up before kernel panic. Not sure if this test indicates good logic board, power supply or not?
Can boot OK in safe boot mode. Again should that indicate logic board and hard disc OK?
Help?

If all three of the LEDs light up, that means that power is getting to the places it should, but even if the logic board is getting power, that doesn't mean that it is functioning properly. You have performed all the tests you can (thanks for listing them) and nothing shows up. Call Apple and make an appointment to take it in and have a genius look at it, or, if you have Apple Care, call them and see what they suggest.

MacBook 2.1 Kernel Panic on startup

Hi, Guys! I have a macbook that sometimes goes in Kernel panic at startup
I need to power of the the mac pressing the power button for some seconds, after this it boot normally...
this is the log of kernel panic:
Interval Since Last Panic Report: 11836 sec
Panics Since Last Report:          4
Anonymous UUID:                    4F66CF62-080B-44E4-906F-5CDFA05FB6CA
Thu Jan 31 13:37:42 2013
panic(cpu 1 caller 0x2aaeab): Double fault thread:0x4ca3000, trapno:0x8, err:
0x0, registers:
CR0: 0x8001003b, CR2: 0x04b08da8, CR3: 0x008d6000, CR4: 0x00000660
RAX: 0x00007fff8ab11190, RBX: 0x00007fff8ab11190, RCX: 0x00007fff8ab11191,
RDX: 0x0000001000000000
RSP: 0xffffff9004b08db8, RBP: 0x00007fff5fbfd940, RSI: 0x000000110002e3ed,
RDI: 0x000000110002e3ed
R8: 0x000000110002e3ed, R9: 0x00007fff5fbfdab8, R10: 0x00007fff5fc404a0,
R11: 0x00007fff8ab261e0
R12: 0x00007fff5fc43dc8, R13: 0x00007fff5fc43be8, R14: 0x00007fff5fbfdab8,
R15: 0x00007fff5fbfdab8
RFL: 0x0000000000010093, RIP: 0xffffff80002c0c20, CR2: 0xffffff9004b08da8
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x2fbaef78 : 0x21b837 (0x5dd7fc 0x2fbaefac 0x223ce1 0x0)
0x2fbaefc8 : 0x2aaeab (0x59de64 0x59e0df 0x4ca3000 0x8)
0x2fbaf0b8 : 0x2a29d2 (0x0 0xf 0x2e3ed 0x11)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0x5fbfd940
BSD process name corresponding to current thread: launchd
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3
~1/RELEASE_I386
System model name: MacBook2,1 (Mac-F4208CA9)
System uptime in nanoseconds: 13280777169
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleTyMCEDriver       1.0.2d2 - last loaded 13191053663
com.apple.driver.AppleHDA       2.0.5f14
com.apple.driver.AppleUpstreamUserClient        3.5.7
com.apple.driver.AppleMCCSControl       1.0.20
com.apple.driver.SMCMotionSensor        3.0.1d2
com.apple.driver.AudioAUUC      1.57
com.apple.driver.AppleLPC       1.5.1
com.apple.Dont_Steal_Mac_OS_X   7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AirPort.Atheros        411.19.4
com.apple.driver.AirPort.Atheros21      425.14.7
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile        17
com.apple.driver.AppleIntelNehalemProfile       11
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPI_SMC_PlatformPlugin        4.7.0a1
com.apple.driver.AppleGraphicsControl   2.10.6
com.apple.driver.AppleBacklight 170.0.46
com.apple.driver.AppleIntelGMA950       6.3.6
com.apple.driver.AppleIntelIntegratedFramebuffer        6.3.6
com.apple.driver.CSRHIDTransitionDriver 2.4.5f3
com.apple.driver.AppleIRController      303.8
com.apple.driver.AppleUSBTrackpad       201.6
com.apple.driver.AppleUSBTCKeyEventDriver       201.6
com.apple.driver.AppleUSBTCKeyboard     201.6
com.apple.driver.USBCameraFirmwareLoader        1.1.0
com.apple.iokit.SCSITaskUserClient      2.6.8
com.apple.BootCache     31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub    4.2.4
com.apple.iokit.IOAHCIBlockStorage      1.6.4
com.apple.driver.AppleFWOHCI    4.7.3
com.apple.iokit.AppleYukon2     3.2.1b1
com.apple.driver.AppleHPET      1.5
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleIntelPIIXATA      2.5.1
com.apple.driver.AppleUSBEHCI   4.2.4
com.apple.driver.AppleSmartBatteryManager       160.0.0
com.apple.driver.AppleUSBUHCI   4.2.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC       1.3.1
com.apple.driver.AppleACPIButtons       1.3.6
com.apple.driver.AppleSMBIOS    1.7
com.apple.driver.AppleACPIEC    1.3.6
com.apple.driver.AppleAPIC      1.4
com.apple.driver.AppleIntelCPUPowerManagementClient     142.6.0
com.apple.security.sandbox      1
com.apple.security.quarantine   0
com.apple.nke.applicationfirewall       2.1.14
com.apple.driver.AppleIntelCPUPowerManagement   142.6.0
com.apple.driver.AppleHDAHardwareConfigDriver   2.0.5f14
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib     2.0.5f14
com.apple.iokit.IOFireWireIP    2.0.3
com.apple.driver.AppleProfileTimestampAction    10
com.apple.driver.AppleProfileThreadInfoAction   14
com.apple.driver.AppleProfileRegisterStateAction        10
com.apple.driver.AppleProfileKEventAction       10
com.apple.driver.AppleProfileCallstackAction    20
com.apple.driver.AppleHDAController     2.0.5f14
com.apple.iokit.IOHDAFamily     2.0.5f14
com.apple.iokit.IOSurface       74.2
com.apple.iokit.IOBluetoothSerialManager        2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily   1.8.3fc2
com.apple.kext.OSvKernDSPLib    1.3
com.apple.iokit.IO80211Family   320.1
com.apple.iokit.AppleProfileFamily      41
com.apple.driver.AppleSMC       3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert   1.0.1
com.apple.iokit.IONDRVSupport   2.2.1
com.apple.iokit.IOGraphicsFamily        2.2.1
com.apple.driver.CSRUSBBluetoothHCIController   2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily       2.4.5f3
com.apple.driver.AppleUSBMergeNub       4.2.4
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBComposite      3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily       1.6
com.apple.iokit.IODVDStorageFamily      1.6
com.apple.iokit.IOCDStorageFamily       1.6.1
com.apple.driver.XsanFilter     402.1
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOATAPIProtocolTransport        2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily   2.6.8
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOFireWireFamily        4.2.6
com.apple.iokit.IONetworkingFamily      1.10
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.iokit.IOATAFamily     2.5.1
com.apple.iokit.IOUSBFamily     4.2.4
com.apple.driver.AppleEFIRuntime        1.4.0
com.apple.iokit.IOHIDFamily     1.6.6
com.apple.iokit.IOSMBusFamily   1.1
com.apple.kext.AppleMatch       1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages     289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform      1.3.6
com.apple.iokit.IOPCIFamily     2.6.5
com.apple.iokit.IOACPIFamily    1.3.0
System Profile:
Model: MacBook2,1, BootROM MB21.00A5.B07, 2 processors, Intel Core 2 Duo, 2
GHz, 2 GB, SMC 1.13f3
Graphics: Intel GMA 950, GMA 950, Built-In, spdisplays_integrated_vram
Memory Module: global_name
AirPort: AirPort Extreme, Atheros 5416: 2.1.14.6
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HCC543225A7A380, 232,89 GB
Parallel ATA Device: MATSHITADVD-R   UJ-857D
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021b,
0x1d200000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x5d200000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205,
0x7d100000 / 2

So I just ran Apple Hardware Test and first two attempts get code:
4SNS/1/40000000: TB0T
Anybody? Logic Board?
And on a third attempt:
4VDC/1/40000003: VideoController

Can't get past kernel panics on startup

Like the title says, I'm unable to get past kernel panics on startup. I know next to nothing about the technical side of computers, so I'll just explain the whole process of what I've gone through. Earlier today I got a kernel panic after waking my computer from sleep. I restarted and everything was fine. I probably should have looked in to the cause of the panic, but I just went on using the computer as normal. Later, I returned to the computer, woke it from sleep, and got another kernel panic. I restarted, and my computer got to the Apple logo and gray spinning wheel when it froze. No kernel panic, just a frozen wheel. So I shut it down, restarted it again, and this time I got to just a gray screen (I don't remember if the Apple logo had shown up or not, but there was no spinning wheel). It hung on that screen for a while, then the fans started running like they were trying to take off a jet engine, so I shut it down. I tried restarting it once more, and it got to the spinning wheel screen when another kernel panic happened. I restarted the computer, and tried this a few more times, getting kernel panics each time. So I let it rest. A few minutes later I tried it again. This time it got even further, and I was pretty hopeful that I'd at least get the computer running again. It got past the gray spinning wheel, to the blue screen that usually shows up before the "cosmic wallpaper" and login screen. At that point it hung on that blue screen, and the jet engine sound started up. Now I take out my 10.5 instal disc. I back up with Time Machine, so I'm just going to hope reinstalling and restoring from Time Machine works out. I stick in my 10.5 disc, hold down the 'c' key and start up the iMac. Eventually it gets to the spinning wheel screen and a kernel panic. That's where I am now. Any help? I have a big paper due on Tuesday, so there's a ticking clock.
Thanks a lot
Mike

Hi - I have a similar problem here, running snow leopard 10.6. I am also not technical.
I went out & left my mac on, and when I got home it had switched itself off and on restart I got to the grey screen + Apple icon. Unfortunately I have never backed up my data!! Tried starting in safe mode (holding Shift key) and get the following message every time I try this:
panic (cpu 0 caller 0x560d25): "Unable to find driver for this platform: \"APCI\".n" e/SourceCache/xnu/xnu_1504.9.37/iokit/Kernel/IOPlatformExpert.cpp:1389
Debugger called:<panic>
Backtrace (CPU0),Frame : Return Address (4 potential args on stack)
BDS process name corresponding to current thread: Unknown
Mac OS version: Not yet set
Kernel Version: Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root: xnu-1504.9.37~1/RELEASE_I386
I have tried booting from the Leopard disc but can't do a repair as it doesn't seem that it can find the Mac hard disc. Have also tried starting holding the <option> key and get a Hardisc icon displayed with an arrow beneath, and when clicked a progress bar appears for maybe 30 seconds, then disappears & it just carries on in grey screen mode with spinning wheet & Apple icon.
I want to know if I just have to concede that I have lost my data and need to reinstall the OS, or it could be worth taking to a Mac repair agent to try to retrieve it

I'm getting a kernel panic on startup after restore hd

Long story made short...installed Google Music to use with my new phone...next day Mac running slow, left it running while I was out, came home to frozen screen...booted in safe mode and clicked off everything that was running in background. Tried to reboot and it kept shutting down when reaching grey screen. (I orginally had leopard and upgraded to snow leopard) got my OSX (leopard) install cd and booted to disc, disk utilities and check disc...originally would only let me verify, which failed, then unmounted and was able to get repair disc...unable to repair. I erased hd and then restored from my time machine backup, now when I boot I get kernel panic on startup. I'm running of external hd which I formatted and installed leopard essential software. So my question is, is my HD shot? Are there other step I can take? I can't afford to bring this in to someone. This is most of what my screen says when I boot:
Panic(cpu 1 caller 0x47f5ad): "Process 1 exec of /sbin/launchd failed, errno 8\n"@/SourceCache/xnu/xnu-1504 . 15 . 3/bsd/kern/kern_exec.c.3145
Debugger called: <painic>
Backtrace (cpu1), Frame : Return Address (4 potential args on stack)
and the a list of numbers....
any and all help would be appreciated to help me resolve this

Bump, can anyone help?

Help! Following a crash/froze/kernel panic while video editing, I've "lost" an iMovie Project!

I've been using iMovie for a number of years in all its various versions from about iMovie 4 onwards.
For the past year while I've been using iMovie 9, about once a day my iMac has periodically experienced a crash/freeze/kernel panic - ie the screen goes grey - ie "grey screen of death!", (sometimes with horizontal lines on it at intervals) and the GUI becomes totally non-responsive; when this happens I usually have to cycle the power and do a cold restart. In every instance, my iMovie Project has remained more-or less in tact (perhaps with the most recent change missing, but that's usually easy enough to redo).
Last week, I upgraded iMovie 9 to 11 and I've continued editing for several days and until tonight (fingers crossed) all seemed well - no crashes!
But ealier this evening, while editing, my iMac experienced another crash/froze/kernel panic; on reboot, I discovered that my current Project has disappeared completely from iMovie's Project Library! Using the Finder I can see that it is STILL there on the HD - I can open the .rcproject package and the Project file is inside! I tried double-clicking on the Project file and sure enough iMovie 11 launches, but there is no sign at all of my Project in the Project Library.
How can I recover it so that I can continue editing?
VERY fortunately just yesterday I exported the entire Project as a HD Movie to view on my TiVo, so I've been able to re-import that movie back into iMovie, so I've lost very little. But I have have a number of Projects on the go and I don't want them all to vanish one-by-one!
If THIS is one of the new features of iMovie 11, I want my money back!

After receiving a deafening silence to my original post, I contacted the "geniuses" at Apple.
I'll cut to the chase - they could do nothing for me; apparently my Project is probably corrupt and that's why it no longer works. They could offer no tools that I could use to check and correct the corrupted Project, just basically said "tough".
Along the way they suggested that I should trash my iMovie preferences which are found as follows...
Macintosh HD/User/Library/Preferences/com.apple.iMovieApp.plist
(Note "User" is whatever you log in as).
Problem was that my iMovie 11 just returned to as it was when it was first installed (without fixing my faulty Project!) Actually, that was a bit of a problem because I could no longer switch my video to my second monitor because the "Viewer on other Display" was no longer the last item under my iMovie's "Window" menu item. It took me a little while to discover that I had to check the "Show Advanced Tools" in the "General" Tab of "iMovie Preferences" for that and other features to become available again.
So, I'm sorry, I have nothing to offer you that shows any promise - apart of course from regularly backing up the Project onto another drive (which is what I now do)!

Constant Kernel Panics on startup on 10.4.7

I had no problems after upgrading to 10.4.7 on my Titanium iBook so I upgraded on my G4 iMac desktop as well.
I had one successful restart under 10.4.7, but on all subsequent attempts, I've gotten kernel panics on startup. with a screen and a half of backtrade and exception state lines, filled with hexadecimal codes.?
Anyone else had this problem? Any suggestions as for how best to deal with it?
P.S. I did make a bootable backup of my disk before upgrading, and my first thought is that I should just restore back to 10.4.6 from the backup. The problem, however, is that the backup is on a firewire drive, and I can't figure out how to make the machine boot from the backup. Is there a simple 'button' trick I can use to make it boot from the firewire drive instead of from the internal HD? (Alternately, is there a way I can get my machine to recognize the Firewire drive from system 9.2.2. I have been able to contrive a way to reboot from the internal drive's 9.2.2. folder... but I can't see the firewire drives from it).

OK: Here's a follow-up:
I tried using the Startup Manager and, to my surprise, that didn't seem to help. It still wasn't recognizing my firewire drive backups as volumes.
I then went to Dr. Smoke's diagnostic list and looked through it. The first step that seemed both relevant and possible to my situation was the suggestion (through a link to a help page) that I reset my PRAM and DVRAM.
So, I went ahead and tried rebooting (in OS X) while holding down option-command-p-r, and the machine booted fine. No kernel panic at all.
I decided to try immediately rebooting into OS-X as per 'normal' (i.e. without holding down option-command-p-r). The kernel panic recurred. Several attempts at rebooting revealed the following: (1) Wiith each attempt to reboot off 10.4.7 on the hard drive while holding down option-command-p-r, I had no problems. (2) With each attempt to reboot from 10.4.7 on the hard drive without holding down option-command-p-r, I got a kernel panic. Hmm.... (That seems significant, but what exactly it means, I don't know.)
I did find out that, if I held down option-command-p-r while rebooting, I was able to boot successfully into 10.4.7 from the hard drive, and that from there, I was able to reboot into with no problem into 10.4.6 from my backup firewire drive (even if I didn't hold down option-command-p-r).
At this point, I'm planning just to restore 10.4.6 to my internal hard drive from my backup, and hope that works. (I'll post and let you know if it does.) However, if the information presented above suggests anything to anyone (e.g. about more specific problems that I should investigate, perhaps with the RAM, I'd be most appreciative to hear your thoughts.).

Kernel panic at startup and impossible to reinstall SL

Hi
I've recently bought the new iMac with SSD.
I've upgraded the Ram, adding 8go Crucial to the 4go existing.
The first time, I started very well, very quickly.
After that, I installed W7 on my bootcamp partition. It went very fine also.
After having installed W7, I booted on the Mac OS X partition. This was the first time I've got a kernel panic at startup.
Fine, I thought it was a mismanipulation when I installed W7. So, I wanted to reinstall SL.
I tried, 2 or 3 times, but I've always had this message while installing "The installer could not copy the necessary support files".
I managed to boot Mac OS in Safe Mode. I tried to installed SL directly from the Safe Mode, and I got another error : "Impossible to read the installation disk".
So I tried to make a UBS Stick bootable image of the SL installation disk : I cannot mount it "checksum error".
I hardly think now that the problem is coming from the RAM, but instead from the SL disk.
The installation disk is new, it was the first time I was using it.
Now, I am able again to boot from the mac os partition without having chaned anythink, but having booted once in safe mo
Guys, could you help my with that ? How can I get a new disk ? How can I be sure that the RAM is OK (W7 is working fine and SL also right now).
Thanks in advance

Sorry misunderstanding, my bad. By new I meant never used before.
It is the brand new iMac 27" SSD. So it supports up to 16GB of RAM.
I am also sure of the model of RAM I ordered.
I wanted to remove the new intalled RAM, however, I can't : it's way to hard. When I pull the tab, I just slip.
I can boot to the Install DVD (So, SL 10.6.8). I can go up to the beginning of the installation. It evens begins to copy files, and I always get the error at the same moment.
The same thing happens when I try to install SL from the Safe Mode of my existing OS. It begins to copy file until I get "unable to read the disk, bla bla".
I hope it was only a minor disk corruption, but I would like to be sure. How can I test the RAM and the Installation Disk ?
I tried to make an image of the installation disk, but when I try to mount the compressed image, I get a checksum error...
thanks again for your help

Application crashes create kernel panic in startup

Similar Messages

Maybe you are looking for