Application designer does not run

Hi,
I have different version of Application designer on my laptop (win XP pro).
When I double-click on any pside.exe , it does not run. If I copy the same on another Laptop it runs.
Any idea ?
Thank you.

Thanks Nicolas,
they have worked well until I imported an exported configuration file.
I restarted my PC , but it did not work neither.
Memory issue ? I don't think so but anyway windows says nothing or it says in a logfile that I can not find. Laptop has 3Gb of RAM.
Are we running only one instance of AppDesigner ? Yes .
Regards.

Similar Messages

  • Application file does not run on user-end system

    Dear Friends,
                          I just finished preparing a DAQ VI for measuring reed switch parameters and tested it many times on my system with Labview 8.5 prof edition and DAQmx8.6.1. The program runs excellently on my system. Now when I build the application(.exe file) and try to test it on a fresh system without Labview, my program is not running and the "Active" yellow LED on my USB 6221 keeps on blinking every 3 Seconds. I have no error message displayed because I have not done anything exclusively to show error messages. I have installed only DAQmx8.5 and Labview runtime engine on that system. I herewith attach my VI. Please guide me through in overcoming this problem and also brief me on how to display error message on the front panel to the user during runtime.
    Attachments:
    FINAL4main.vi ‏83 KB

    Hi Mike,
                Thanks for your ideas. I incorporated create task-create channel-start task-clear task methodology in my VI and could experience a lot of improvement in  the execution speed too.  I attach my VI for your viewing and comments.
                 I would like to add some more finishing to the executable. I want to display any error messages to the user on a separate tab on the front panel which need not be always visible to the user. I also need to disable the "Maximize" button on the front panel so that the user cannot maximize the executable window. I also need to hide and show a numerical indicator  programmatically. Is it possible ? I also need to disable the "Test" pushbutton, once it is clicked till one entire cycle gets over.
    Attachments:
    HKATCRMSTD.vi ‏101 KB

  • Weblogic 6.1 sp2 , application which used to run on wl 6.1 sp1 does not run anymore

    Hi
    For some reason, my application 'portal' does not run on weblogic 6.1 sp2,
    It used to run fine on 6.1 sp1 .
    I am attaching the weblogic.log file with this msg.
    Thanks,
    Regards,
    Lalitha
    [weblogic6.1sp2logs.txt]

    Tobin is right, my apoplication is called "portal", I am not using WLPortal. Anyway,
    I managed to resolve my problem,I had sax2 , xp and xt parsers placed in the WEB-INF\lib
    directory of my application in addition to my own jar file. I removed the parsers
    , and now my application is running fine.
    It is strange though, since my application used to load and work flawlessly on
    weblogic 6 as well as weblogic 6.1 sp1 with the parsers in the lib directory....
    Anyhow, thanks a lot for the help.
    Regards,
    Lalitha
    "Tobin Paterson" <[email protected]> wrote:
    >
    Having applied WLS 6.1 sp2 upgrade today I am seeing the same fault.
    I am not using
    WL Portal. Also I think the original poster's application just happens
    to be called
    "portal" and is not using WL Portal.
    cheers,
    Tobin.
    "BEA Support" <[email protected]> wrote:
    Hello,
    Only WLCS and/or WLPS 3.5 sp 2 support WLS 6.1 sp 2
    WL Portal 4.0 support only WLS 6.1 sp 1.
    Regards,
    Developer Relations Engineer
    BEA Support
    "Lalitha" <[email protected]> a écrit dans le message de news:
    [email protected]..
    Hi
    For some reason, my application 'portal' does not run on weblogic
    6.1
    sp2,
    It used to run fine on 6.1 sp1 .
    I am attaching the weblogic.log file with this msg.
    Thanks,
    Regards,
    Lalitha

  • Application does not run on target system

    Hello, This is my first attempt at using this forum & creating a LV standalone application and I have encountered a brick wall.
    I have created a simple VI to display some T/C readings that runs fine on the (LV prof 8.5) development system, but not on a different target PC.
    The target PC does not have LV installed, just DAQ-MX software for Windows V8.6
    The DAQ hardware is a SCXI-1000 chassis with SCXI-1600 USB interface, taking data with SCXI 1102.  I am using the same hardware on both
    the development PC and the target PC.  The DAQ hardware works correctly on the target PC (using MAX).  My application loads, but just does
    not run on the target pc.
    Solved!
    Go to Solution.

    Hello André
    I am not sure.  On my last attempt, I had included "additional installers" Run-Time Engine(s) 8.0.1, 8.2.1, and 8.5.1.
    The application seems to load.  The screen looks normal, it just doesn't seem to acquire any data (although it appears to be running).
    The VI is very simple.  I have attached it (didn't realize I could do this before).  I hope this answers your questions.
    Thanks,
    Bob
    Attachments:
    thermo2.vi ‏250 KB

  • Windows xp runs java application but does not compile it - urgent please

    Hi
    My new PC(portable) does not compile my java progran:
    'javac' is not recognized as an internal or external command, operatable program or batch file.
    If you have any suggestion, please let me know!
    Aria

    Thanks anyhow;
    The following information is sent to beginners site.
    I have talked to british, belgian and others regarding this problem. They said it is very expensive and we laughed.
    Hi,
    Windows XP runs java application but does not compile it. I get following message:
    'javac' is not recognized as an internal or external command, operatable program or batch file.
    MS-DOS does not exists but a command line edits autoexec.nt having allinformation regarding installed jdk5. I run my java applicat
    ion from here. But no compilation.
    Environment variables has following information.
    JAVA_HOME C:\jdk5.0
    CLASSPATH C:\jdk5.0\myPrograms
    path %JAVA_HOME%bin
    All information in autoexec.nt exists as windows 98 and I run it from command line.
    Would you please tell me what is wrong?
    Thanks
    Aria

  • Applescript run from Mail rule does not run

    I am attempting to run an Applescript from a Mail rule. Basically, the Applescript does not run.
    Stripped to the bare essentials, the following script runs fine when Applying a rule in Mail:
    say "Hello"
    as well as this one:
    say "Hello"
    using terms from application "Mail"
    on perform mail action with messages theMessages for rule theRule
    tell application "Mail"
    -- statements to process each message in theMessages
    end tell
    end perform mail action with messages
    end using terms from
    But, when I remove the comments from the block lifted verbatim from the Applescript manual:
    say "Hello"
    using terms from application "Mail"
    on perform mail action with messages theMessages for rule theRule
    tell application "Mail"
    -- statements to process each message in theMessages
    end tell
    end perform mail action with messages
    end using terms from
    the script does not even say Hello.
    I am trying to go as far as having the Applescript create a new ToDo based on specific incoming emails, but I can't get any but the simplest Applescript to run.
    Can anyone help me?
    Tom

    The script works just fine - at least, as designed if not as expected.
    When the script runs, Mail and/or AppleScript looks for a perform mail action handler. If that is found, the commands within are executed.
    If there is no perform mail action handler then the script is run as-is (i.e. as if you clicked 'Run' in AppleScript Editor).
    And that's exactly what's happening here. In the first case (that works) the script is running because there's no (visible) perform mail action handler.
    In the second case where it apparently doesn't work, there is a handler, so that handler is being executed. Any code outside that handler is ignored (unless it's called from within the perform mail action handler.
    Since your 'say' command is outside the handler, it is ignored. However, if you move it inside the perform mail action handler you'll hear your speech.

  • REPORT DOES NOT RUN CORRECTLY , URGENT PLEASE HELP

    Hi,
    I am trying to run a report from visul basic screen, but it does not run correctly. Here is how I am running the report. There is a screen developed in VB This screen prompts the user for user id and password. Once it gets that, it connects to the oracle database and pulls out a column from a table. And passes that value as a parameter to the report. Now I am calling the the report for each individual value . There are 21 value being pulled out of the database and it invokes the report 21 times. So there are 21 report engines gets started. Is there a better way to do that ? Secondly when I pass the parameter , some parameters does not pass correctly I guess , because its not generating any out put . Like out of 21 may be 10 or 11 reports gets generated correctly but rest of the reports are blank. I debug the screen i saw that the parameter value is correct, everything seems good. But still the reports are comming blank. Any Idea why it is so ? The command line that i am using in VB screen is
    Shell "C:\progra~1\ora95_2\bin\rwrun60.exe P:\Business_Analysis_&_Reporting_Tool\Test_REPORT_Templates\STORE_TYPES\Baby_Distribution_Report.Rdf USERID=" & UID & "/" & PWD & "@cposp201 DESFORMAT=PDF DESTYPE=FILE DESNAME=" & txtPath.Text & Replace(strName, " ", "_") & ".PDF BRND='" & adoRecBrand!Brand & "' PRINTJOB=NO PARAMFORM=NO"
    In the above command " adoRecBrand!Brand " is the parameter thats being passed. This is actually a recordset and brand is the column in it. When I debug the screen , I see the value also there. But the report comes out blank. Please help. This is urgent.
    Thanks
    Feroz

    The way you call reports is not scalable. If you have 100 records come back from database, you would end up launch 100 engines at the same times, which probably will blow up your machine. You should use oracle reports server to do that. You can either use rwcli60 to submit the job to reports server, or invoke rwcgi60 from URL.
    I am afraid some of reports engine failed to start and you get nothing back in your case.
    After switch to use reports server achitecture, if you still see some report is blank in your application, then you can run that report with that special set of parameters manually and see if any problem with the report itself.
    Hope this helps.
    Thanks,
    -Shaun

  • ICal does not run one event that has a Applescript attached to it. 24u?

    I have a number of reoccurring events in iCal that run a Applescript.  Tow of them refuses to run.  I have tried it as a Applescript and saved it as a run only and neither works (the script run fine if I test them by hand).
    so I thought I have a look in the log and found this 24u information. 
    can anybody help out here? I am not sure why it appears, if it is good or bad, how to fix it and if it is at all realted to my problem.  Other scripts seem to run well, it is this one and an other one that do not get activated by iCall.
    They run on a MM running 10.6.8, iCall 4.0.4 (1395.7)
    Thanks.
    Log today:
    19/09/2011 07:00:00          iCal Helper[211]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX:  dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found.  Did find:
              /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
    19/09/2011 07:00:00          [0x0-0x12012].com.apple.iCal.helper[211]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.
    19/09/2011 07:45:01          iCal Helper[317]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX:  dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found.  Did find:
              /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
    19/09/2011 07:45:01          [0x0-0x28028].com.apple.iCal.helper[317]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.
    19/09/2011 14:30:02          iCal Helper[1019]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX:  dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found.  Did find:
              /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
    19/09/2011 14:30:02          [0x0-0x73073].com.apple.iCal.helper[1019]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.

    Hi,
    It looks like the version of 24U's Appearance OSAX you have installed does not run on Lion.
    I would contact the developer to see if they have a version that does yet. See http://www.24usoftware.com/AppearanceOSAX
    Alternatively you could look to see if the Applescript really needs to use it.
    Best wishes
    John M
    Edit: If you are running Snow Leopard, I think you may need to make the application "iCal Helper" (which you'll find in iCal's application package) run as 32 bit. I'd also suggest you check this with 24U.

  • Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the

    Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.

    Hi Nealeh
    Thanks i think I got it working of a fashion.
    Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
    Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
    Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
    The scenario is:-  say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
    Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
    So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
    Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
    She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
    Had she had a normal skimpy bikini on, no problem!
    If i don't solve it, she will get fired!
    Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
    "Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
    I have Safari on this iPad. Guess that is all it runs.
    So technology is not my friend today!

  • OS X Mavericks 10.9.3 Does Not Run Smoothly

    Hi,
    I just upgraded my iMac and MBP from the Mac OS X ML 10.8.5 to the latest OS X Mavericks 10.9.3.
    The new system does not run smoothly.
    No matter it's the iMac or the MBP, the screen freezes for a very short of time whenever I try to switch to a different running program(especially when I try to switch to other programs from the Safari).
    So what's causing the problem? What should I do about it?
    Thanks.
    Ed

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • List of games that are not running correctly or does not run in ICS update

    I hope to start a list for apps (esp games) that does not run after the ICS update.
    Kindly list the game name along with the error. Hopefully its not off topic.

    Since many of us having issues with gaming [both HD and Non-HD] after updating to ICS, so i decided to share a little bit of info regarding gaming performance in ICS.
    For the gaming troubles we are not yet sure whom to blame? SONY, ICS or the Game developer.
    1. Few game developers said that their 3D engine is not yet compatible with ICS.
    2. No response from Google yet.
    3. Sony was suppose to update their Graphics driver [Adreno] in ICS, so we were expecting better gaming experience, but in reality it declined. [Hoping to solve in 4.0.4, if SONY releases]
    Remember Gaming performance and experience can be different depending on device, application version etc. Results stated below may not be same for all.
    Few Gaming updates from different users:
    # Angry Birds Space : For some it worked/some not working [Worked for me]
    # Temple Run : Touch Control issues [ Game Developers said that their 3D engine is not yet compatible with ICS]
    # Fruit Ninja: Some reported it lags. The speed of movement is slow.
    # Asphalt 6HD : Works but some weird lines appears in the screen.
    # NOVA 2 HD : Runs for 2-3 mins then force closes.
    # Backstab HD : Runs for 2-3 mins then force closes.
    # Dead Space : Working well till now.
    # MW3: Working.
    # Fifa 12 : Not working for me.
    # Shadow Gun: Not Working.
    Now it was advised that you must use the latest version of the games available in Google play store. The version worked in Gingerbread may not work in ICS. So it is recommended that you download the latest version of the games you want to play in ICS.
    **Before Downloading you can also contact the developers if the games has any compatibility issues with ICS or not.
    Message was edited by: Auni

  • Program compiles, but does not run

    To: XCode Users <[email protected]>
    From: Brigit Ananya <[email protected]>
    Subject: Program compiles, but does not run
    I am trying to port a Java application from the PC to the Mac. I am using XCode and the program compiles, but it does not run.
    When I try to run the ...app, I get the message that the main class is not specified, etc.
    When I try to run the ...jar, I do not get the message that the main class is not specified, but I do get the message that there is no Manifest section for bouncycastle, etc.
    Here are the detailed messages I get in the Console when I try to run the program:
    When I try to run the ...app, I get the following message:
    1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] [LaunchRunner Error] No main class specified
    1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] [JavaAppLauncher Error] CallStaticVoidMethod() threw an exception
    1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] Exception in thread "main" java.lang.NullPointerException
    1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] at apple.launcher.LaunchRunner.run(LaunchRunner.java:112)
    1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] at apple.launcher.LaunchRunner.callMain(LaunchRunner.java:50)
    1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] at apple.launcher.JavaApplicationLauncher.launch(JavaApplicationLauncher.java:52)
    When I try to run the ...jar, I do get the following message:
    1/9/09 7:22:43 AM [0x0-0x8d08d].com.apple.JarLauncher[2262] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:374)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] Exception in thread "main"
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] java.lang.SecurityException: no manifiest section for signature file entry org/bouncycastle/asn1/DEREnumerated.class
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.security.util.SignatureFileVerifier.verifySection(SignatureFileVerifier.java:377)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.security.util.SignatureFileVerifier.processImpl(SignatureFileVerifier.java:231)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.security.util.SignatureFileVerifier.process(SignatureFileVerifier.java:176)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.util.jar.JarVerifier.processEntry(JarVerifier.java:233)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.util.jar.JarVerifier.update(JarVerifier.java:188)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.util.jar.JarFile.initializeVerifier(JarFile.java:325)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.util.jar.JarFile.getInputStream(JarFile.java:390)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.misc.URLClassPath$JarLoader$1.getInputStream(URLClassPath.java:620)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.misc.Resource.cachedInputStream(Resource.java:58)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.misc.Resource.getByteBuffer(Resource.java:113)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.net.URLClassLoader.defineClass(URLClassLoader.java:249)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.security.AccessController.doPrivileged(Native Method)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.lang.ClassLoader.loadClass(ClassLoader.java:316)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:280)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:374)
    I do specify the main class in both, the Manifest file and the Info.plist file, in the correct way, "package.MainClass". Is there another place where I need to specify it?
    Why do I need org/bouncycastle/asn1/DEREnumerated.class, and how would I have to specify it in Manifest?
    I also posted these questions at Mac Programming at forums.macrumors.com and at Xcode-users Mailing List at lists.apple.com/mailman/listinfo, but I did not get any answer.
    Please help! Thanks!

    There was something wrong with my Info.plist file.
    So, here is my corrected Info.plist file:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
         <key>CFBundleDevelopmentRegion</key>
         <string>English</string>
         <key>CFBundleExecutable</key>
         <string>AnanyaCurves</string>
         <key>CFBundleGetInfoString</key>
         <string></string>
         <key>CFBundleIconFile</key>
         <string>AnanyaCurves.icns</string>
         <key>CFBundleIdentifier</key>
         <string>com.AnanyaSystems.AnanyaCurves</string>
         <key>CFBundleInfoDictionaryVersion</key>
         <string>6.0</string>
         <key>CFBundleName</key>
         <string>AnanyaCurves</string>
         <key>CFBundlePackageType</key>
         <string>APPL</string>
         <key>CFBundleShortVersionString</key>
         <string>0.1</string>
         <key>CFBundleSignature</key>
         <string>ac</string>
         <key>CFBundleVersion</key>
         <string>0.1</string>
         <key>Java</key>
         <dict>
              <key>JMVersion<key>
              <string>1.4+</string>
              <key>MainClass</key>
              <string>AnanyaCurves</string>
              <key>VMOptions</key>
              <string>-Xmx512m</string>
              <key>Properties</key>
              <dict>
                   <key>apple.laf.useScreenMenuBar</key>
                   <string>true</string>
                   <key>apple.awt.showGrowBox</key>
          <string>true</string>
              </dict>
         </dict>
    </dict>
    </plist>Ok, so now I can at least run the AnanyaCurves.jar file by double-clicking on it.
    However, I still cannot run the AnanyaCurves.app file. When I double-click on it, I get the following message in the Console:
    1/11/09 5:12:26 PM [0x0-0x67067].com.apple.JarLauncher[1128]  at ananyacurves.AnanyaCurves.main(AnanyaCurves.java:1961)
    1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137] [JavaAppLauncher Error] CFBundleCopyResourceURL() failed loading MRJApp.properties file
    1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137] [LaunchRunner Error] No main class specified
    1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137] [JavaAppLauncher Error] CallStaticVoidMethod() threw an exception
    1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137] Exception in thread "main" java.lang.NullPointerException
    1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137]  at apple.launcher.LaunchRunner.run(LaunchRunner.java:112)
    1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137]  at apple.launcher.LaunchRunner.callMain(LaunchRunner.java:50)
    1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137]  at apple.launcher.JavaApplicationLauncher.main(JavaApplicationLauncher.java:61)Why is it looking for the MRJApp.properties file? Isn't this outdated? Shouldn't it look for the Info.plist file? I do not have a MRJApp.properties file.
    Also, in the Run menu of my XCode project, Go, Run, and Debug are disabled, but perhaps this has to do with not being able to run the AnanyaCurves.app file.
    Thanks for your time! I really appreciate any help you can give me!

  • Itunes 9.2 (64 bit)  does not run

    All of a sudden my iTunes 9.2 (64 bit) on Windows 7 does not run anymore. Repairing the setup did not help. Removing and re-installing the application helped only 1 time, after that the program again did not run anymore. And during that 1 run it did load my (big) library but could not find any of the songs!
    Using Window's system restore (back 3 days) did not solve the problem either.
    I had been using iTunes 9.2 for a few weeks without a problem. Why doesnt it suddenly not run anymore? What can I do? Thanks for helping!

    No error message at all. No clue either.
    A few times the program DID run - after around 20 mins waiting it suddenly appeared...
    A few other strange things:
    - After double clicking the iTunes icon something DOES start: the task manager shows the iTunes process, sometimes with up to 40-50% of the CPU capacity, sometimes with low memory usage, sometimes higher
    - When trying to uninstall iTunes (completely) with Revo Uninstaller: the program does not appear in the REVOapplication list
    - When trying to uninstall it through Control Panel I can uninstall it.
    - I disabled my iTunes library, to be sure that the trouble has nothing to do with that. Maybe it could be too big (around 40 thousand songs!) or corrupt. But even without a library the startup is not possible - or incidentally taking 20 mins or more.
    - I ran Advanced System Care to fix registry problems and defragmenting the systems files - no change.
    What can be wrong? And more important: what can be done?

  • IBook does not run on battery

    My Ibook does not run on battery when it reaches 48%. It just shutsdown with no warnings. I have to connect the AC adapter to work if i disconnect it the ibook just shuts down. I have to waut until it reaches 100% and then i take the AC adapter. I book shuts down and after i turn it on with out the AC and it stays running on bat until the 48%. Then i have to go through everything again.

    Jobbaman wrote:
    Till now my battery has been working perfectly. The machine is about 1 year old and I use it heavily for my work. I prefer to unplug my battery when it's full, and use it till it go's to sleep before plugging it in again. This results in a very high Cycle count (453) but a still perfectly working battery (98% according to CoconutBattery), I can use the machine for about 4 hours on a full battery.
    The amperage would be 0 since your battery is not in a charge cycle.
    Part of your problem could honestly be your cycle count and method of caring for your battery. If you check some of the research about Li_ion batteries this is the worse way to use it. Li-Ion batteries work best with little charges. Deep cycling Li-Ion can kill the cells. There is no good reason to charge the battery and then use it as you have been doing. This just kills your battery for no reason. The MacBook is designed to cut the charge off when the battery is full and it does not hurt the battery to lie idle like this. The method you're using can prematurely kill your battery.
    Either the battery has a problem that is not showing on you readings or the battery circuit is fried. Do you know someone that has a MacBook or live near an Apple store so you can test your battery on a known good MacBook. Or you could try one of their batteries in it.

  • RT does not run when deployed to 9642 sbRIO LV 2011

    I have code deployed to a Ni sbRIO9642 where the RT code does not run when deployed to the when using LabVIEW 2011. It appears the NI-RT.ini file on the target is not being properly configured. I manually configured the ini file using FTP and the RT still will not run. I built a small test application and the RT on that did not run either, although i had hard validatiuon that the FPGA code was indeed running. Thanks - Keith

    Hey Martin, 
    I don't know if this specific problem was resolved, but there was a known issue in LabVIEW Real-Time 2011 (sp1) that exhibited this behavior. 
    Shared Variables
    292012
    Return
    Real-Time Applications containing typedef Shared Variables fail to run.
    If you are building an RTEXE that contains Shared Variables whose data type is based upon a type definition and the build specification is configured to disconnect type definitions the RTEXE will not run.
    Workaround: 1.) Manually disconnect the variable from the typedef before building the application 2.) Change the build spec so it doesn't disconnect type definitions
    Reported Version: 2011 32-bit
    Resolved Version: 2012
    Added: 10/11/2011
    Although this has been fixed in 2012, and shouldn't be an issue for you developing in LabVIEW 2012. Have you tried implementing a heartbeat VI? to verify if your RT app is actually running and not communicating? (great example here)
    Do you have the system state pushier installed on your cRIO? does it point to a memory leak or 100% CPU utilization? (steps to install it found here, if you're not familiar)
    Are you using the cRIO in Scan Interface mode? or in the FPGA interface? 
    Applications Engineer
    National Instruments
    CLD Certified

Maybe you are looking for