Application doesn't work after build (database toolkit and report gen toolkit).

I wrote an application using database toolkit and report gen toolkit to retrieve some data from a database, put into a Word doc, save the Word doc and print it. It works fine when I run the vi, but when I build and run it, it does nothing. I have tried all of the settings in Projec Manager that I think might help but it still won't work right. Labview 8.2.1, XP.
Thanks,
Charlie
Solved!
Go to Solution.

Thanks for the help. I finally abondened the Word append table and used the regular report gen append table and got it to work fine. The error was 214682314. That led me to the thread about column numbers must vbe between 1 and 63, but like I said, my coulumn number is 7 so don't know what is going on. Anyway I got the vi to work and do what I want so I guess now the problem is solved (moot).
Charlie

Similar Messages

Application doesn't work after build

hi,
My program doesn't work while running the.exe.It works fine in Labview develop enviroment but it fails running when i do the same in .exe . If i run my .exe file ,i will get always error like below (see attch..).i am using Driver for Spectrum Analyzer(R&S,FSP). can anyone please suggest me?
Attachments:
Fehler.jpg ‏235 KB

Hi all,
I have the similar problem, I have a write a code to control power supplies for example Töllner 8852 and Töllner 8952
everything works fine in development version, but when I build a exe, named Teststand.exe
this freezes, and don`t work at all.
i tried to bug the exe, but in debug mode i only see, that beginnig from Device OK subvi nothing work anymore,
the dataflow seems to be stopped before Device OK subvi (see attached jpeg file)
i attach my build properties also.
I tried to run the exe on the development machine, where Labview runtime engine 2010, and VISA Run Time 5.2 installed.
The communication with the instrument(s) is over GPIB, i have a USB-GPIB adapter on my PC.
When i run the top level vi on the development machine in labview development version everything is working fine, but builded EXE doesn`t.
the pop up windows are for debugging purpose, the pop ups in Device OK subvi doesn`t appear by running the builded EXE
Labview version is 2010
could you please help me, what could be the reason, and what can i try next?
thank you in advance
best regards
Robert
Attachments:
Power Supply lvproj.jpg ‏177 KB
Modul Device OK.vi will not be loaded.jpg ‏89 KB
Test Power Supply simple.zip ‏59 KB

Please help: Application doesn't work after upgrade to Workshop 8 sp2 from sp1

Hi,
Our application worked on workshop 8 sp1. After we upgrade system from sp1 to
sp2, some of the part doesn't work propertly any more.
1. netui:select seems not bind form data propertly. For drop down list box in
forms, although user has chosen something from the drop down list box, the returned
value in the form is always null.
2. we use Java script window.open(url,...) to download and view files. After upgrade
from sp1 to sp2, clients keep getting IE error complaining that "Internet Explore
can not open this Internet site. The request site is either unavailable or can
not be found. Please try again later", although the server and the files are all
in local host server.
Please help. Thanks

Did you update your workshop application files and recompile your application?
A few things changed between GA and sp2, some annotations were renamed, and some
were added.
If you open up your application in Workshop sp2, it should given you the option
to upgrade your application.
Failing that, you may need to go through the code that is not performing as it
was before and check whether it was not utilising a bug that was fixed in sp2
and thus causes it to not function correctly now.
"Cynthia" <[email protected]> wrote:
>
Hi,
Our application worked on workshop 8 sp1. After we upgrade system from
sp1 to
sp2, some of the part doesn't work propertly any more.
1. netui:select seems not bind form data propertly. For drop down list
box in
forms, although user has chosen something from the drop down list box,
the returned
value in the form is always null.
2. we use Java script window.open(url,...) to download and view files.
After upgrade
from sp1 to sp2, clients keep getting IE error complaining that "Internet
Explore
can not open this Internet site. The request site is either unavailable
or can
not be found. Please try again later", although the server and the files
are all
in local host server.
Please help. Thanks

TouchID for App Store purchases doesn't work after turning phone off and back on?

TouchID for unlocking my iPhone 5s works 99.9% of the time. It's fantastic. However, using it to authorize App Store purchases, NOT in-app purchases, is less fantastic. In my case, it seems like every time I turn my phone off and back on, the phone forgets it's can use TouchID to authorize app purchases. I have to go into Settings -> General -> Passcode & Fingerprint -> (enter my passcode) -> Fingerprints -> iTunes & App Store, and turn that off. Then I have to turn it back on and enter my Apple ID password. Not exactly a quick procedure. The good news is that once I turn it back on, it works like it's supposed to until I turn my phone off and back on again. If it can remember to use TouchID for unlocking the phone, why can't it remember to use TouchID for authorizing App Store stuff? Am I missing something?
Anyone else experiencing the same thing and/or have a solution? Thanks!

SKAshanchi wrote:
From this article:
http://support.apple.com/kb/HT5883?viewlocale=en_US&locale=en_US
Note: Touch ID cannot be used for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
I don't have any restrictions set on my phone at all.

Error 10 when building an application in LV8 and Report generation toolkit 1.1.1

I am trying to build an application using LV8.0.1 and Report generation toolkit 1.1.1 and i get this error.
Error 10 occurred at ABAPI Dist Copy Non-VI Files.vi -> ABAPI Dist Build LLB Image.vi -> ABAPI Copy Files and Apply Settings.vi -> EBEP_Invoke_Build_Engine.vi -> EBUIP_Build_Invoke.vi -> EBUIP_Build_Invoke.vi.ProxyCaller
Any ideas?
Scientia est potentia!

Did you attempt to add the _wordsub.llb and _excelsub.llb files to the application as support files? I believe in LabVIEW 8.0 instead of adding the entire LLBs you should just add the _Word Dynamic VIs.vi and _Excel Dynamic VIs.vi as dynamic VIs. I think I've seen a similar post on the discussion forums in the past that recommended this.
If this suggestion doesn't help, please reply, and attach a simple VI and .lvproj file demonstrating the problem so I can investigate further.
Good luck,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Sirius Internet Radio doesn't work after Snow Leopard

Sirius Internet Radio doesn't work after I installed Snow Leopard. It works on my Firefox. I emptied the cache on my Safari, but still nothing. Any solutions?

The reason why Sirius Radio online won't work with Safari anymore is because Sirius radio online is only supported by a 32-bit browser. Snow Leopard and all its applications are 64-bit. The best solution is to use firefox. If you still insist on using safari..... Go to adobe.com reinstall adobe flash player. Install/update Flip4Mac. Go to setting for Flip4Mac and check off all the options under the browser tab. Then when you go into Sirius Radio online, you will get an error message, just click okay. Then when you click a station, a quicktime player will come up and you will be able to listen to sirius online radio.
[email protected]

ASP application has problems working with oracle database 8.1.7

ASP application has problems working with oracle database 8.1.7 through both oracle ODBC driver and Microsoft ODBC driver
We have an ASP application running on Windows 2000 server, and with 8.1.7 Net8Client and MDAC 2.6 SP1.
The application worked fine with an Oracle 8.0.5 database.
After upgrading oracle database to 8.1.7.0.0, our ASP application works fine except when updating the same data record more than once. The application is not saving our updates.
We tested our application using Oracles ODBC driver v8.1.7.5.0
and experienced more problems. We had problems just bring up our data entry pages. In either case, we are returned with some 505 errors in our browser, problems with the ASP pages and IIS, the page is not displaying.
If anyone has some suggestions on how to fix my problem, please advise. Thanks in advance.

thanks...i saw one article with this approach..but the document did not present the detailed process...do you have one? i am still searching for a good procedure to follow...since it is an old database and focusing/studying old versions like this is a pain in the a**... :(

My iPhoto doesn't work after installing lion?

My Iphoto doesn't work after installing lion.
it suggest that I have to instal iphoto again.
where can I find this

If it suggests that you install iPhoto again, install iPhoto again. In your Macs Box that it came in there should be 2 Discs, one is an Applications CD (You need this one) And another is the Mac OS X.
Insert your Applications CD and hold C while the computer is starting up, then you will be walked through the installation of Applications.

IPhoto 8.1.2 doesn't work after reinstalled the OS 10.6.8?

iPhoto 8.1.2 doesn't work after reinstalled OS 10.6.8?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

IMac - Display doesn´t work after restart

My iMac 21 Display doesn´t work after restart. If I turn it off and 1 hour later I want use it again the iMac shows the white screen with the mac logo and then the display goes off. I connected an external display to check if the iMac was ON and with the external display I can login and do everything but the iMac Display doesn´t work .
If I turn it off and wait 3 or 4 hours and then turn it back on the display works OK.
This is very strange behavior I have spent hours and hours trying to fine the solution or a similar issue but nothing so I am looking help here at apple.com
BTW When I bougth the iMac 21 there were some spots over the display so the display was replaced by the provider. The warranty has expired by now.

To tell you the truth, I don't know if they have to repalce the LCD panel or what they do for a bad backlight. In this reality of block or assembly replacement it probably involves repalcing the panel and not the backlight component. Don't know what it would cost. You'd have to ask that of a service center.

Touch ID doesn't work after ios 7.1.1 update

Touch id doesn't work after ios 7.1.1 update..
Why????

After IOS update, you first have to use passcode.
Passcode is needed when
After restarting your iPhone 5s
When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
To enter the Touch ID & Passcode setting

[Solved] Network doesn't work after hibernate?

Hello! This is my first legit Linux install so excuse me if I'm a bit slow. I installed Arch last night and everything went smoothly. However, after I tested out hibernate on my machine, the network doesn't seem to work. Just prior to the hibernate, I installed Pidgin and Skype but they worked alright, so I think that the hibernate caused a problem on eth0.
I have an Asus P8Z68-V Pro motherboard with an Intel 82579V Gigabit Ethernet Controller that's using the e1000e driver. Running "dmesg | grep e1000e" says that it is up.
I'm not entirely clear here, but from reading, I think that I have several ways of connecting to the network, including network, dhcpcd, networkmanager, and wicd. I am using wicd so I did the following (or at least I think I am only using wicd):
#rc.d stop network
#rc.d stop dhcpcd
#rc.d stop networkmanager
Similarly, I put a ! in front of network in rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=()
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="Vicious"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng dbus !network netfs crond wicd)
Restarting eth0 through wicd-cli still did not work. I also tried resuscitating the network via instructions on the configure network page before trying to focus solely on wicd.
I found a few similar problems on the forums by searching "wicd hibernate" and tried several solutions but they did not work. Several problems seem to be that the network doesn't work after a suspend because I guess the stuff in RAM did not get saved? But people were able to restart the network by running "/usr/lib/wicd/autoconnect.py" and I wasn't able to get this to work. As a final effort, I added "resume" into mkinitcpio.conf and placed the machine into sleep again to see if it may magically reset something but of course this did not happen .
mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata resume filesystems usbinput"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
Not sure if my fstab.conf is useful but if this has something to do with settings getting "lost" in swap, here it is. Linux is on an SSD and HDD (sda and sdc) and Windows 7 is on a HDD (sdb).
fstab.conf:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /tmp tmpfs nodev,nosuid,noatime,size=2000M,mode=1777 0 0
/dev/sda1 / ext4 defaults,noatime,discard 0 1
/dev/sda2 /home ext4 defaults,noatime,discard 0 2
/dev/sdc1 /boot ext4 defaults 0 1
/dev/sdc2 /var ext4 defaults 0 0
/dev/sdc3 swap swap defaults 0 0
/dev/sdc4 /media/data ext4 defaults 0 0
shm /dev/shm tmpfs nodev,nosuid,size=10G 0 0
Is wicd causing these problems or did I configure something else improperly? Would appreciate any help to get eth0 up again!
Last edited by TheBigCow7 (2011-09-13 17:57:20)

Ok, I think I've made some progress! Hibernate definitely affects my network connection. Could this be a kernel 3.0 problem?
I noticed that ifconfig showed eth0 without an inet addr, just an inet6 addr for the longest time. e1000e seemed to be loading up ok. I'm not certain here, but I think that meant the dhcp settings didn't stick, or something along those lines.
Trying to use dhcpcd like the instructions here did not work. By some chance, one attempt did work and while it did, I downloaded and installed dhclient. After that one successful attempt, renewing the DHCP lease via dhcpcd did not work again.
Luckily though, I found that running "dhclient eth0" worked. My DHCP settings seemed to have somehow gotten messed up after my initial, problematic hibernate to the point where none would stick, even after a reboot. Manually typing in "dhclient eth0" would get eth0 working, so I decided to add it to the bottom of /etc/rc.local, like in the example on the networking page.
Now, eth0 works after a boot. However, after the daemons load up during the boot process, my computer takes a long time to get to the login prompt (this is relatively speaking, since I am on a SSD and the boot process used to be blazing fast before). I'm pretty sure it's because I added "dhclient eth0" to /etc/rc.local.
I should say that even with these changes, after a hibernate, my eth0 still does not work and if it weren't for the edit to /etc/rc.local, eth0's inet settings would still not stick after a reboot (that is to say, the hibernate does do something to my network settings).
Is this the correct/most efficient way to fix my DHCP problem? Can I fix my "eth0 after hibernate" issue? Also, can I make my DHCP settings boot up without changes to /etc/rc.local so that I can get a fast boot again (still not sure how it was able to work before without my edit)?

Steps to enable BPEL to work after destination database outage?

re.Steps to enable BPEL to work after destination database outage?
Am wondering re. Steps to enable BPEL to work after destination database outage?
Am getting BPEL console errors:
Connection reset Error Code: 17002
(have raised SR 5381930.992)

Update from SR 5381930.992 seems to indicate this may relate to version of target database (version 8).
10-MAY-06 06:08:43 GMT
ACTION PLAN
============
The schedule retried for many times because of the error "java.sql.SQLException: No more data to read from socket" occured.
As I can not reproduce the same error in my internal system which using 10g data
base. I think the cause of the issue is the database version you are using.
Here is the action plan:
1. Run the test with 9i or 10g database again, to see if the error "No more data to read from socket Error Code: 17410." occurs or not?
2. provide the detail version of database, so that I can reproduce the issue in
my internal system.
Regards,
Pete
10-MAY-06 06:09:08 GMT
Email Update button has been pressed: Sending email to [email protected]
09-MAY-06 23:36:43 : CHANGES MADE VIA MetaLink
NOT YET FORWARDED TO OUR INTERNAL SYSTEMS :
New info : FORALL :
Regarding 1./ If I target stdbdev (oracle 9) then I can confirm that these
unneccesary retry lines do not occur ...
Regarding 2./ SQLPlus indicates that Coopdev is : Oracle8i Enterprise Edition
Release 8.1.7.2.0

Mail server doesn't work after upgrading from SL to ML

My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$

if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

Why tethering with USB cable doesn't work after IOS6.0 update?

why tethering with USB cable doesn't work after IOS 6.0 update?

Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

Application doesn't work after build (database toolkit and report gen toolkit).

Similar Messages

Maybe you are looking for