Application error for nokia 5300 snake3

hello,guys
it(my phone)shows application error after starting a new game.
and also shows null pointer(java/lang/nullpointer)
i got the phone in USA.
i downloaded the game from nokia europe site,,is there a language
problem between the phone and the game?
any help will be grateful!!!

I don't use Windows myself but from what I've seen on these boards, this kind of thing can be caused by an antivirus getting in the way.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • Firmware for NOKIA 5300

    I have two questions.
    1) What are the differences between firmware V 3.39 and V 5.0 for Nokia 5300 phone?
    2) When i try to add a contact to a sms which is being written, only the name of the contact is added, instead of both name and phone number! Why is this? How can i add a saved phone number(pre saved in "contacts" ) to a sms ,without writing the number manually?

    Hello,
    I made a firmware update yesterday. Today, I noticed that the pound-key ("#") does not put the phone in silent mode anymore. This was definetly caused by the firmware-update. How can I reconfigure "#" to put my phone into silent-mode?

  • IM messaging application error in Nokia 6301

    Everytime I try to open the IM application in my Nokia 6301 I get the following application error/Details: Java/lang/IllegalAccess Error: Cannot access class com/nokia/mid/ui/lcdui/DisplayStateListener from class am.
    I have try solving this problem doing the Rest. factory sett: *Restore settings only And Restore all without success. I'm able to restore the phone to the factory settings but still unable to open the IM application.
    I have also tried: Nokia Pc Suite & Nokia software updater without success.
    Any ideas how can I recover this application?
    Thanks

    I found out that the error was due to a wave file which i tried to play.
    This link says to use "audio/wav" instead of "audio/x-wav" ...but still 6230i does not play the wav file.
    Pls visit this link :
    http://forum.nokia.com/document/Forum_Nokia_Technical_Library/contents/FNTL/audio_x-wav_throws_MediaException_on_Nokia_6230i.htm
    Any idea why this might be happening?

  • Application Error for PcSuite.exe & PcSync.exe : F...

    I'm facing this Applicaton Error problem when I click on to Nokia PC Suite (even after repairing / removing / and re-downloading the newest software version).
    PcSuite.exe Application Error(Failed to initialize properly (0xc0000034) 
    PcSync.exe Applicaton Error
    (Failed to initialize properly (0xc0000034)
    How to solve this problem ??? I can't connect my Nokia 5320 with the computer now.
    Any way else to download video / photos without using this Nokia PC Suite software ??? 
    By the way, is there a Nokia Web-based version that I can do the connection ???
     Look forward to technical help soon :-(
    Jess 

    I don't use Windows myself but from what I've seen on these boards, this kind of thing can be caused by an antivirus getting in the way.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Unlock code for nokia 5300

    my friend gavce me her old phone. nokia 5300.
    i need the unlock sim card thing.
    pleaseeee!!!
    Message Edited by zipper19 on 29-May-2008 06:12 AM

    29-May-2008 04:15 AM
    babdi wrote:
    Please do not post IMEI or other personal information like phone numbers, email addresses as this is an open forum Psoting e-mail addresses attract spam mails.
    And posting IMEI numbers invites troublemakers to report "their" phone as stolen and give your IMEI number in the report, thus rendering your phone unusable.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Application Error for an Add-on

    Everyday the users logon to SAP and when they log in, the system starts up the add-on which has been develped in SDK. They then get the following error which will close down SAP and exit the user. If they log-in again the system starts up. This is an issue as all current users in the entire company get this error and it also happens sometime s throughout the day. Basically they all have to log into the system twice.
    The errors are as follows:
    1. Application has a problem
    Diagnostic file C:\Program Files \SAP\SAP Business One_20071015121637.dmp was created. Please contact Support and attach teh diagnostic file.
    2. System.Runtime.InteropServices.COMException (0x800706BE) The remote procedure call failed at SBObouiCOM.ApplicationClass.get_Statusbar()
    at SBO.SBO_AddonBase.SBO.Addon.Connect_SingleSignOn()
    at SBO.SBO_AddonBase.SBO.Addon.ConnecttoSBO()
    at SBO.SBO_AddonBase.SBO.Addon.Initialize()
    at SBO.SBO_AddonBase.SBO.Addon..ctor(strring startuppath, String AddonName)
    at SBO.SBO_Addon.EVOSS_Main..ctor(String Startuppath, StringAddonName, Boolean&pbo_RunApplication)
    at SBO.EVOSS_Addon.SubMain.Main()
    Would anyone know as to why this happens.
    Many Thanks
    Adrian
    Message was edited by:
    Adrian Toy

    Toy,
        whenever u want the addon u start its. Else u ininstall the addon so that at the starting of SAP u wont get the installation or error.
    Hope this helps u give me reward points,
    Regards,
    Anitha

  • Help for nokia 5300

    i tried to print something over a computer, so i plugged my usb cable and put it on data storage mode and so on.. after i have it unplugged i cannot access my folders on the phone anymore when i open my memory card i cannot see my folders but the capacity says its being occupied by my files..
    i tried to plug it back to the computer and i can still access the folders but on the phone itself i cannot.. need your help on this.. thanks

    Hi,
    If you haven't emptied your trash while the phone is connected, just re-connect your phone to the Mac and then empty your trash. While you deleted files from your phone's memory card, the Mac actually doesn't delete it until you run the "Secure Empty Trash" command.
    hope this helps

  • Two Alerts for one scenario: Application Error and No mapping found

    Hello,
    we have a synchronous scenario here embedded in an BPM.
    The last send step step is sync. The receiver is a web service (SOAP adapter) which sends back a response.
    Problem with the response from the service:
    First test: error entries in SXMB_MONI and in RWB
    RWB only shows message "No mapping found".
    SXMB_MONI shows more:
    1 entry for send step (status: log version)
    1 entry for APPLICATION ERROR for response
    1 entry for NO_MAPPING_PROGRAMM_FOUND for response
    APPLICATION ERROR:
    We have changed to trace level 3 now and there are some messages:
    level 3 message type T: Unknown channel type: SOAP
    Don´t know if this matters, because the channel is the sender channel.
    NO_MAPPING_PROGRAMM_FOUND:
    We have checked the whole implementation.
    It is completed w/o anything missing. the required mapping is available.
    No left change list entries to be activated.
    Error text:
    The Interface-Mapping http://xxx.com/xi/global GetDocIDsReq_nach_GetDocIDsResp is not available in runtime cache
    We made more than one full cache refresh but w/o any effect.
    We checked: There are no locks left!
    Does anybody here have experience with this problem or has more ideas what to do?
    Best regards
    Dirk
    Message was edited by:
            Dirk Meinhard

    Hello Dirk,
    We figured out that if you change your message mapping you also have to refresh and save your Interface Mapping.
    To ensure that your messages are equal with your Interfaces and the Message Types you should test the Interface Mapping by using integration Builder.
    If this works you have to check your BPM.
    By using BPM we figured out that if there is a fault in a BPM version the engine will not use this new version.
    To figure out which BPM version is used you have to open the
    Process Monitor à select the process and display the graphic à navigate to EXTRAS and select Workflow Builder. There you will see which BPM is really used. Maybe this is an old one.
    Hope this will show you where the problem is.
    Daniel

  • He XML message is going over to SRM from XI , but getting an application error (Exception)  when checking in sxmb_moni on the SRM side

    hi experts  ,
    we are using classic scenario (ECC 6.6 & SRM 7.0)
    we have are configured Procure-to-Pay Scenario ,Note 1263876 - SAP SRM: Configuration of Procure-to-Pay Scenario.
    but facing issue.
    The XML message is going over to SRM from XI , but getting an application error (Exception)  when checking in sxmb_moni on the SRM side. So we are not able to see the PR in the Sourcing cockpit in SRM.
    error as below
    <SAP:Category>Application</SAP:Category>  
    <SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>  
    <SAP:P1 />  
    <SAP:P2 />  
    <SAP:P3 />  
    <SAP:P4 />  
    <SAP:AdditionalText />  
    <SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/SE/Global">ExchangeFaultData</SAP:ApplicationFaultMessage>  
    <SAP:Stack>Application has thrown an exception</SAP:Stack>  
    <SAP:Retry>M</SAP:Retry>  
    </SAP:Error>

    Hi Vijay,
    Can you tell us the interface name?
    If it is stuck in FEH (Application Error) in SRM then you can check the detail error by going into tcode /n/sappo/ppo2.
    You need to enter the Business Process, Order Assignment and Mode Of Postprocessing Order and then execute.
    It will show you all the messages stuck in application error for that interface and if you double click on any one of them you will get to see the detailed error with options to Discard, Repeat etc.
    Let us know if this helps you.
    Regards,
    Mayur

  • How can I monitor application errors?

    hi,
    How can i monitor and where in one place both the technical errors and application errors.
    for example , if i have File -> XI -> RFC
    and the RFC has errors where can i see this errors in one place?

    Hi Udi,
    The report RSALERTPROC does not need to run to deliver RWB alerts. These alerts are pushed directly to the receiver. Only if you want escalation processes or if you want to forward CCMS alerts to the Alert Mgmt. you need to schedule RSALERTPROC.
    From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
    If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
    For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
    You'll find more information about trouble shooting the alerting in SAP Note 913858.
    Also go thru these links:
    Alerts not getting triggered from Adapter Framework
    Alert  Configs...
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    Regards,
    Abhy

  • Raise Application Error on Dynamic Action

    Hi
    I am using Apex 4.2. On a click of button a Dynamic Action is written, which calls a DB Package. The DB package has exception handlers and also the package has two output parameters
    Error Code and Error Msg
    So in my code(Dynamic Code) i make a call to the package and checks the value for Erroc Code.
    Begin
    Package call......
      If v_error_code <> '0' Then
        Raise SC_Error;
      End if;
    Exception
      When SC_Error Then
        RAise_Application_error(v_err_code, v_err_msg);
    End;
    But when i run the page and I click I get an Internal exception error
    Output from Debug -- I am not sure what the Cell in Red colour means, because the package is returning a correct message (before the red line).Can anyone help please??
    Thanks
    JS
    ......message: AJAX call returned server error ORA-20003: Customer has already been matched for Execute PL/SQL Code.
    4
    ......is_internal_error: true
    4
    ......apex_error_code: APEX.AJAX_SERVER_ERROR
    4
    ......ora_sqlcode: -20003
    4
    ......ora_sqlerrm: ORA-20003: Customer has already been matched
    4
    ......error_backtrace: ORA-06512: at line 41 ORA-06512: at "SYS.DBMS_SYS_SQL", line 1926 ORA-06512: at "SYS.WWV_DBMS_SQL", line 973 ORA-06512: at "SYS.WWV_DBMS_SQL", line 999 ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_EXEC", line 830 ORA-06512: at "APEX_040200.WWV_FLOW_PLUGIN_UTIL", line 2304 ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_ACTION_NATIVE", line 442
    4
    ......component.type: APEX_APPLICATION_PAGE_DA_ACTS
    4
    ......component.id: 23185203797756209
    4
    ......component.name: NATIVE_EXECUTE_PLSQL_CODE
    4
    ...Execute Error Handling Callout defined on Page or Application Level
    4
    ...Execute Statement: begin declare l_error wwv_flow_error_api.t_error; begin l_error := wwv_flow_error_api.g_error; wwv_flow_error_api.g_error_result := apx_error_utils.handleerror ( p_error => l_error ); end; end;
    4
    ......Values changed by callout:
    4
    .........message: An unexpected internal application error has occurred. Please get in contact with your system administrator and provide reference# for further investigation.
    4
    .........display_location: ON_ERROR_PAGE
    4
    Stop APEX Engine detected
    4
    Final commit
    4
    1 - 59

    Edit: Well, Patrick beat me to the punch because I was taking my jolly time writing this down
    Well, if you look below the part you put in red, you can see that a callout is made: ...Execute Error Handling Callout defined on Page or Application Level
    With directly below that:
    ......Values changed by callout:
    4
    .........message: An unexpected internal application error has occurred. Please get in contact with your system administrator and provide reference# for further investigation.
    Since the plsql call is on the serverside, this error is trapped within the error handling function aswell. Your error has simply been obscured by it, and probably because it looks at the error backtrace and determines the error is internal.
    Looking at the sample error handling code, this is probably where it goes "wrong":
    -- If it's an internal error raised by APEX, like an invalid statement or
      -- code which cannot be executed, the error text might contain security sensitive
      -- information. To avoid this security problem rewrite the error to
      -- a generic error message and log the original error message for further
      -- investigation by the help desk.
      if p_error.is_internal_error then
    I recreated the situation here, and put some debug in the error handling function just so I could see what sort of error is being processed:
        apex_debug.message('error code: '||p_error.apex_error_code);
        apex_debug.message('sql code: '||p_error.ora_sqlcode);
        apex_debug.message('sql errm: '||p_error.ora_sqlerrm);
        apex_debug.message('error_backtrace: '||p_error.error_backtrace);
    0.05750
    0.00007
    ...Error data:
    4
    0.05757
    0.00006
    ......message: AJAX call returned server error ORA-20099: raise application error for Execute PL/SQL Code.
    4
    0.05763
    0.00006
    ......is_internal_error: true
    4
    0.05769
    0.00005
    ......apex_error_code: APEX.AJAX_SERVER_ERROR
    4
    0.05774
    0.00005
    ......ora_sqlcode: -20099
    4
    0.05779
    0.00006
    ......ora_sqlerrm: ORA-20099: raise application error
    4
    0.05785
    0.00005
    ......error_backtrace: ORA-06512: at line 1 ORA-06512: at "SYS.DBMS_SYS_SQL", line 1926 ORA-06512: at "SYS.WWV_DBMS_SQL", line 1064 ORA-06512: at "SYS.WWV_DBMS_SQL", line 1090 ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_EXEC", line 832 ORA-06512: at "APEX_040200.WWV_FLOW_PLUGIN_UTIL", line 2304 ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_ACTION_NATIVE", line 442
    As you can see, the ajax error is an internal error, and that is why it is handled as such in the error handler. With this info you should be able to adjust your handling function. Test for the error code (APEX.AJAX_SERVER_ERROR) and then throw the error message or test for the -20000 range of custom errors for example.
        if p_error.is_internal_error then    
            -- Access Denied errors raised by application or page authorization should
            -- still show up with the original error message
            -- do not parse ajax server errors here !
            if    p_error.apex_error_code <> 'APEX.AUTHORIZATION.ACCESS_DENIED'
              and p_error.apex_error_code not like 'APEX.SESSION_STATE.%'
              and p_error.apex_error_code != 'APEX.AJAX_SERVER_ERROR'
            then
    It probably does need some more work but you should get the gist of it.

  • APPLICATION ERROR when downloading software

    I lost my installation disk for printer and trying to download software so i can have a printer again but i click download, run, and run again and then i get an application error for the framework and have to click ok to terminate application. what do i do now?? I need a printer and this one is new! hp deskjet 3056a j611

    Hi!, jdudley: Welcome, to Forum !. Try ... http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/i-have-a-deskjet-3056a-j611-series-and-i-can-not-install-to/td-p/2189709

  • Flashcode for Nokia E72 ?

    Hi all,
    Just want to have information about nokia E72 and the application 2D Barcode reader compatible  Flashcode ...
    There is no problem of compatibility with nokia E71 and you can find  the tool very easier.
    but I found nothing with nokia E72 (is it no compatible ?).
    Someone knows the good tool for having  the 2D Barcode reader compatible  Flashcode on this version E72 ?
    Thanks for your help !

    I found the solution !!
    You can download the application mobiletag for nokia E71 on your nokia E72.
    It warns you the the different version but you can install it. After test, it's work well with flashcode / QRCode / Datamatrix
    you can download the tool here :
    http://clients.mobiletag.com/wapmobiletag/listing.php?action=list_model&brand=Nokia
    bye bye

  • Whatsapp for Nokia 305

    can i use whatsapp on asha 305
    Moderator's note: We have amended the title of this post as it was moved from another board.

    Yes, you can use WhatsApp on your Nokia Asha 305 now! Go to this thread for more information: http://discussions.nokia.com/t5/Phone-Applications/Whatsapp-for-Nokia-Asha-305/td-p/1728070
    Remember to click the white star if this post has helped you! 

  • WiFi hot spot application for Nokia X6

    Hi,
    Is there any WiFi hot spot application for Nokia X6? (Except JoikuSpot).
    Please don't suggest apps which helps to connect to free wifi hot spot, I'm looking for an app which turns my 3g / 2g connection to wifi hotspot.
    And any one from India facing the problem to purchase an app through ovi store? For me its giving error message saying "your language is not supported". I have selected English is as my language but still I'm getting the same error.
    Solved!
    Go to Solution.

    Though i'm not sure whether the problem is same but pls do refer to the thread below.
    /t5/Ovi-com-Ovi-Store-Ovi-Share-and/Ovi-Store-paid-apps-amp-SMS-problem/m-p/1089569
    Please mark the post as solution if it solves your problem.
    Current Device - Nokia Lumia 1020/920

Maybe you are looking for