Application Error (gwpoa.exe & GWWWW1.dll)

Hi everyone,
We are having the POA on one of our GroupWise 2012 (Windows) servers crashing.
Here are the general information:
Faulting application name: gwpoa.exe, version: 12.0.0.8586, time stamp: 0x4f153311
Faulting module name: GWWWW1.dll, version: 12.0.0.8586, time stamp: 0x4f1531c9
Exception code: 0xc0000005
Fault offset: 0x001679df
Faulting process id: 0x2344
Faulting application start time: 0x01cf48970a4ea082
Faulting application path: C:\Program Files (x86)\Novell\GroupWise Server\Agents\gwpoa.exe
Faulting module path: C:\Program Files (x86)\Novell\GroupWise Server\Agents\GWWWW1.dll
Report Id: 6b68533f-b48a-11e3-964a-00505692208f
THE FOLLOWING IS THE XML RESULTS:
- System
- Provider
[ Name] Application Error
- EventID 1000
[ Qualifiers] 0
Level 2
Task 100
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2014-03-26T02:00:36.000000000Z
EventRecordID 16602
Channel Application
Computer mta-gw03.mta.qld.edu.au
Security
- EventData
gwpoa.exe
12.0.0.8586
4f153311
GWWWW1.dll
12.0.0.8586
4f1531c9
c0000005
001679df
2344
01cf48970a4ea082
C:\Program Files (x86)\Novell\GroupWise Server\Agents\gwpoa.exe
C:\Program Files (x86)\Novell\GroupWise Server\Agents\GWWWW1.dll
6b68533f-b48a-11e3-964a-00505692208f
Does anyone have any ideas why this has started doing this? (About two three weeks now).
There have been no updates to the Server (Windows, Novell, e.t.c.)
Thanks.
Cheers,
Ant

Hi Ant,
Is DEP (Data Execution Prevention) turned OFF on the server in question?
Cheers,

Similar Messages

Acrobat Distiller Application Error: acrodist.exe ntdll.dll

Hello All,
When submitting a doc to the distiller I intermittently get the follow error;
Faulting application acrodist.exe, version 8.2.2.217, faulting module ntdll.dll, version 5.2.3790.4455, fault address 0x0001b404.
Can anyone offer an explanaion for what might be causing this?
If you need more info just ask...
Thanks in advance....
Pit.

If this is a question about Distiller, please repost in the Acrobat forum. This forum is concerned with the Distiller SERVER product for Windows. Please include information about your OS, and the source of the postscript file being distilled as well as the job options file you are using when distilling.

Crystal reports 2011 - Application error crw32.exe

Hi,
I hope that I'm posting in the right section.
We use Crystal reports 2011 on one of our servers but are experiencing a number of application errors to do with the software. Unfortunately I haven't been able to find out if there are any specific activities on the server which are generating them.
The errors are as follows:
Faulting application name: crw32.exe, version: 14.0.2.364, time stamp: 0x4de99eaa
Faulting module name: crw32.exe, version: 14.0.2.364, time stamp: 0x4de99eaa
Exception code: 0xc0000005
Fault offset: 0x007010ef
Faulting process id: 0x3f8
Faulting application start time: 0x01cf6ea5517923e6
Faulting application path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32.exe
Faulting module path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32.exe
Report Id: 954a54f3-da9a-11e3-acdb-3cd92b08a874
Faulting application name: crw32.exe, version: 14.0.2.364, time stamp: 0x4de99eaa
Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7ba58
Exception code: 0xc0150010
Fault offset: 0x0008477b
Faulting process id: 0x3f8
Faulting application start time: 0x01cf6ea5517923e6
Faulting application path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 962a1691-da9a-11e3-acdb-3cd92b08a874
Faulting application name: crw32.exe, version: 14.0.2.364, time stamp: 0x4de99eaa
Faulting module name: msxml6.dll, version: 6.30.7601.17514, time stamp: 0x4ce7b8eb
Exception code: 0xc0000005
Fault offset: 0x00001fa8
Faulting process id: 0x1c98
Faulting application start time: 0x01cf6ea75a5019f4
Faulting application path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32.exe
Faulting module path: C:\Windows\System32\msxml6.dll
Report Id: b100ae23-da9b-11e3-acdb-3cd92b08a874
If you require any additional information from me please let me know.
Thanks for reading.
Regards,
Don

Hi Brian,
Thanks for your help and advise.
Crystal has been running on the server for some time (over a year) but hasn't been 'managed' until now so am looking at all of the issues at present.
We haven't seen a pattern when the errors started though.
Unfortunately the only errors I think relating to CR are the ones in the original post. There are other errors, particularly to do with printing, but I think that they these are due to the TS sessions which wouldn't run Crystal. See below.
The print spooler failed to load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\tsprint.dll, error code 0xc1. See the event user data for context information.
I am assuming the users are fine when they view the report then; scrolling through pages. Yes, I believe so.
Yes, there are no locally attached printers on the server so the users rely on their remote session sharing the printer.
Regards,
Don

Directory server 5.1 application error - faulting module libslapd.dll

we are running directory server 5.1 (build 2001.326.2045) on windows nt, with multi-master replication on two servers. one server went down. there are no clues as to why in the access or error logs.
the windows event viewer shows an application error. the faulting application is slapd.exe, faulting module is libslapd.dll, and fault address is 0x0003edb0
any help would be appreciated. any questions please ask. thanks!
Edited by: amlefty on Aug 26, 2009 8:12 PM

we are running directory server 5.1 (build 2001.326.2045) on windows nt, with multi-master replication on two servers. one server went down. there are no clues as to why in the access or error logs.
the windows event viewer shows an application error. the faulting application is slapd.exe, faulting module is libslapd.dll, and fault address is 0x0003edb0
any help would be appreciated. any questions please ask. thanks!
Edited by: amlefty on Aug 26, 2009 8:12 PM

Application Error: vmsnap23.exe

Hello, All.
This is my first post on this forum, so please be nice!
Over the past month I have an application error that occurs every time I log on. It appears that the application vmsnap23.exe is failing to start, but I cannot find out what it is (*or does* for that matter) so that I can fix it. Any ideas?
I'm on XP (sp3 as of yesterday)
Event viewer gives this information:
+Faulting application vmsnap23.exe, version 0.0.0.0, faulting module ntdll.dll, version 5.1.2600.5512, fault address 0x00011669.+
I have followed the Microsoft but have not found anything useful there. The program sits loosely on the C: rather than in 'program files' or either of the system folders.
Is this a Toshiba program, part of XP *or* something dodgy that I can just delete?
Thanks for looking.
Cheers!
Ken

No, Mike.
I removed the version of Norton that was supplied with the laptop and have the full version of AVG that my school uses. I don't think that it could be a Norton leftover, as I have had the laptop for well over a year now and the problem is a recent one.
Thanks for idea, though. I'll check it out.
Cheers!

Application error - Indesign.exe

Hi,
I am work with CS3 Design Premium Suite. I am getting desperate. I can start every program in CS3 Suite without problems but when it comes to Indesign, this error message will come up:
DDE Server Windows: Indesign.exe - Application error
The instruction at "0x0ab32a27" referenced memory at "0x00000000". The memory could not be read.
With I click I have to terminate. I have removed and reinstalled the entire Suite. I did not solve the issue. The Suite was activated in May and Indesign worked perfectly until 4 hours ago... now the program became unusable! Do I have to reformat my hard disk?
Win XP prof, SP2, 2 GB RAM, Dual Core 2.3
Any help is highly appreciated.
Matt

Finally I have found an error report - any clue?
Exception code: C0000005 ACCESS_VIOLATION
Fault address: 08AB2A27 01:00481A27 C:\Program Files\Adobe\Adobe InDesign CS3\AdobePSL.dll
Registers:
EAX:00000000
EBX:00000000
ECX:00000002
EDX:7C90EB94
ESI:00000000
EDI:FE08232C
CS:EIP:001B:08AB2A27
SS:ESP:0023:0013F804 EBP:0013F9A0
DS:0023 ES:0023 FS:003B GS:0000
Flags:00010202
Call stack:
Address Frame Logical addr Module
08AB2A27 0013F9A0 0001:00481A27 C:\Program Files\Adobe\Adobe InDesign CS3\AdobePSL.dll

Windows Server 2008 R2 - Multiple application errors in module MSVCR90.DLL

I'm having some trouble with one of the terminal servers that I administrate, lately there have been a large number of application errors reported by users. Looking at the logs they all have in common that they report MSVCR90.DLL as the faulty module, with
some of the applications throwing errors being fixmapi.exe, iexplore.exe & acrord32.exe.
I did some searching around and tried the usual things of uninstalling and reinstalling the mvc redist, however it doesn't appear to have made much of a difference. I configured capture of user-mode dumps as mentioned in http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/repeated-appcrash-errors-across-many-applications/18ee194c-56dd-4909-abed-e563de11713b
which seems to be recommended as a way to find the real faulty module that is behind all the problems, so far I've generated one dumpfile at least for a fixmapi.exe but I am not sure how to parse it, does anyone have any idea?

Hi DialectEmil,
Would you please let me know whether install all necessary updates on the problem computer? Please run
sfc /scannow command to scan all protected system files. In addition, please perform a
clean boot and check if this issue still exist.
Please also refer to following article and check if help you to troubleshoot application crashes.
Basic Debugging of an Application Crash
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Why do I get the Application Error jqsnotify.exe-Application Error. The memory could not be read?

Why do I get this error message every time i opened up Firefox saying: jqsnotify.exe-Application Error and then at the bottom line it says: The instruction at "0x5ff3d322"referenced memory at " 0xe41203c3". The memory could not be "read". Click on OK to terminate the program.
== This happened ==
Every time Firefox opened
== I recently renewed and installed the CA Security Suite and un-installed Firefox and re-installed it again.

System restore did it for me........!!!! It's gone and I don't miss it one bit.....!!!! May be one of those untraceable tricks that hackers use to irritate people.....Some security programs can identify these things ,but the perps usually use bogus addresses to send them anyway...Cyber criminals SUCK....<u>That is right ,I said that....</u> and they should be jailed and fined and suspended from internet usage all over the globe....
Reverend K.
CEO,FOUNDER,Site Editor,
http://WWW.CCCINTL.NET

Fault application name flash.exe dvaui.dll

hi. i have been having recurring crashes, Windows Applications Event View log indicating that Flash exe failed, see below:
Faulting application name: Flash.exe, version: 11.5.1.349, time stamp: 0x4e5bcaea
Faulting module name: dvaui.dll, version: 5.0.0.19847, time stamp: 0x4d79ee6c
Exception code: 0xc0000005
Fault offset: 0x0015e8f8
Faulting process id: 0x1c4c
Faulting application start time: 0x01cc90a28b6b6f98
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Flash CS5.5\Flash.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe Flash CS5.5\dvaui.dll
Report Id: b892f5b4-fca8-11e0-9705-0009dd50a16a
This has been happening on my new machine when i work in Flash Pro CS5.5 - a part of CS5.5 Classic Collection, when i make animations using drawing and various other tools, specifically, when i do things quickly.
i mean that literally; when i select a keyframe, deselect deselect it, reselect, right-click, delete, do these quicly, sometimes it will happen when i go to save my work after having made many changes to it, then Flash will crash i.e. the cursor spins, the the interface is dimmed, and then all my internet browswers dim including windows browswers, the task bar disappears, Start menu disappears - i cant shutdown, so i hit the restart btn on my tower, but Windows doesnt load, rather i get a black screen asking me to insert a media disc, if i dont and restart by hitting the button on the tower, i get the black screen asking for a media disc, which i do, i insert the Windows installation cd in my optical drive, go to the Repair tools, and use the Shutdown btn there. This is the only way to get my machine out of the loop, to recover, and Windows starts normally.
Because the crash was happening when i work fast, i was wondering if it's to do with a memory issue, and BTW, saving an .fla takes about 10-20 seconds, is NOT immediate, and disables the software as it is saving. The file in question is 1,092 KB.
My machine consists of an i7 2600k cpu, unraided 4 hard disks including a Vertex SSD 120G for the OS and programs, and 3 additional WD at 7200rpm 1 and 2 terrabyte sized, a DVI PCI-e Video Card GTX 580 3G "Phantom". And 16G ram - Gskill DDR3 1600MHz
And, i am NOT having this issue with any other software; i have CS5.5 Classic Collection installed on my machine and am using Windows 7 Ultimate 64bit.
I would appreciate your help.
thanks

Have you tried recreating your preference files in Flash CS5.5? Please be sure to backup any previous preference files before doing this so that you can save them if needed
http://kb2.adobe.com/cps/520/cpsid_52048.html

Application error nicitdl5.exe

When I shutdown my windows XP - windows application error message - nicitdl5.exe. Not sure why?
Lookout version 5.1 Build 8
Many Thanks!

I'm running Labview 8.6 on Windows-XP and I get...
Runtime Error!
Program C:\Windows\system32\nictdl5.exe
This application has requested the Runtime to terminate it in unusual way.
Please contact the application's support team for more information.
...when I shutdown windows.
I don't know why it happens but I can't prevent it if I manually stop the service 'National Instruments Citadel' before shutting down. This must be done every time you shut down. I don't know any other way to solve this.

Application Error nipalsm.exe

I have deployed a exe file on a laptop computer running win2000. I developed the application on a XP computer.
When I start the exe file I get a error message, se the attached file. It seams like the program does not find the path to nipalsm.exe
At my xp computer the path is c:/windows/system32/nipalsm.exe and at the laptop the path is C:/winNt/system32/nipalsm.exe
Where can I change this path? In application builder, under advanced, I selected system requirements windows 2000 or later.
I constructed a path c:/windows/system32/ on the laptop and and placed a copy of nipalsm.exe there, the error disappered. But I suppose that is not a good way to come around the problem.
What is the function of nipalsm.exe?
TIK
Attachments:
ApplError.JPG ‏16 KB

Hai,
Search the forum with this keyword nipalsm.exe and you will get a couple of discussions thread related with that function.

Event 1000, Application error, Outlook.exe, version 15.0.4128.1022 crashes all the time

15.0.4128.1022
502b9a43
KERNELBASE.dll
6.1.7601.17932
50327672
80000003
00013219
2178
01cdb79f5bf10fd6
C:\Program
Files\Microsoft Office 15\Root\Office15\OUTLOOK.EXE
C:\Windows\syswow64\KERNELBASE.dll
9ae04138-2392-11e2-836c-0025b3d25202

There could be various reasons why this is happening. The most common ones:
1. Add-ins or security programs conflicts - disable AVG/Firewall, run Outlook with the command-line "Outlook.exe /safe" to check if it still crashs.
2. Corrupted email profile - Create a new Outlook profile to test.
3. Damaged Office programs file - Repair and reinstall Office 2013.
Let me know the result and feel free to post back. Thanks.
Tony Chen
TechNet Community Support
A new Office has arrived, try it now.
A beautiful Start. It begins here. Windows 8 and Windows RT.
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Application Error AppleMobileDeviceHelper.exe

ITunes when I upgraded to 10.5 and found the error. Even doing nothing, as long as the open ITunes will not stop this error pops up.
My operating system is Windows XP sp3.
I try to uninstall all Apple software, then install the latest version of ITunes and QuickTime still not resolved.
Please help me！

Do you have an iPhone?
If not, try heading into your Add/Remove programs, and uninstalling "Apple Mobile Device Support".
Does that get rid of the crash?

Ntdll.dll application error makes itunes crash

Itunes keeps crashing every 30 minutes to 2 hours since more than 2 years now (!!)
according to the event log of XP there's an application error in module ntdll.dll
I have searched the internet for quite some time for a fix for this problem but there doesn't seem to be a clear one.
Help would be really appreciated!
Message was edited by: marcbolan
Message was edited by: marcbolan

Okay ... not the malware thing that was causing trouble at the beginning of the year. (On the other hand, as well as citing ntdll.dll, that used to always stop people from launching iTunes and quicktime.)
It's relatively rare to see ntdll.dll show up in this context (and probably even rarer to see it only cropping up sometimes), so we'll proceed on a basic principles troubleshooting basis.
ntdll.dll is one of the core Windows operating system files related to handling drivers, so we'd better check on driver, firmware and so forth.
If you've got a name-brand PC, check first at the Manufacturer's website for drivers, firmware and BIOS for your system. If you've added third-party components to the system since then, check for driver updates for those components at the component-manufacturer's website.
If you've got a custom/homw-built system, check at the manufacturer's webpages for drivers/firmware/BIOS for the various components. There's some advice in the following document:
[Updating the drivers on your Windows PC|http://support.apple.com/kb/HT1768]
If you update, does iTunes seem more stable for you? (A bit tricky to tell, of course, given that it doesn't happen right away.

SyncServer.exe - Application Error

Hi,
After 4 trouble-free months, I've suddenly started getting problems with syncing my iPhone - after a sync, if I highlight my Device, and choose Info, I get an application error:
+*SyncServer.exe - Application Error - the instuction at "0x01681540" referenced memory at "0x01686078". The required data was not placed into memeory because of an I/O error status of "0xc0000015".*+
I tried doing a restore, which really hosed it, now I get an iTunes error when starting iTunes:
+*iTunes could not connect to the iPhone ~ because an unknown error occurred(0xE8000001)*+
Cold booting has not helped. Any ideas? iTunes, iPhone, or Windows issue?
current versions:
iTunes 7.5.0.20
iPhone 1.12(2B48b)
XP Pro SP2, all latest fixes, except Java has been nagging me for awhile that an upgrade is available.
Thanks in advance for any help,
Rich

It appears the folder on my XP PC where I keep photos was corrupt, and would give the application error when trying to select the Info tab. It also was timing out when syncing, and everything but the photos were going over ok, so that is what gave me the clue. Creating a new folder, copying the photos to it, deleting the old folder, and then renaming the new folder to the old name fixed my sync problems.

Application Error (gwpoa.exe & GWWWW1.dll)

Similar Messages

Maybe you are looking for