Application Error has occurred in your process Leave of Absence performed
Hello,
We have a leave process in SSHR Module.When we create a leave and send it for an approval then it is approved without an error. But when we update the leave and send it again for an approval then We are getting below error.
Application Error has occurred in your process Leave of Absence performed
The changes were not applied because ORA-01403: no data found ORA-01403: no data found
We have removed all user hooks related to leave.Still error is coming. We are using 12.1.3 version.
Thanks in Advance,
Regards,
monika
Hi Monika,
One more thing i want to tell that when i am checking the transaction from workflow Admin then its showing an error in below activity.
"Notify HR About Commit System Error"
Below error stack has been found in workflow ADMIN
Workflow Errors:
Failed Activity Notify HR About Commit System Error
Activity Type Notice
Error Name WFNTF_ROLE
Error Message 3205: '[email protected]' is not a valid role or user name.
Error Stack Wf_Notification.Send([email protected], HRSSA, HR_EMBED_DEPT_SYSAPPLERR_MSG, WF_ENGINE.CB) Wf_Engine_Util.Notification_Send(HRSSA, 8155, 1296851, HRSSA:HR_EMBED_DEPT_SYSAPPLERR_MSG) Wf_Engine_Util.Notification(HRSSA, 8155, 1296851, RUN)
please see this
The Exception ' The changes were not applied because A person type with a system person type EMP must be specified' is Raised While Appoving Changes to Employee Personal Details. [ID 1545950.1]
Application Error Notification Is Recieved By Requestor After LOA Approval [ID 855141.1]
;) AppsmAsti :)
sharing is caring
Similar Messages
-
Haloo,
I am an iphone 5 user, while using the line application for calling with my girlfriend,
suddenly this error happened
an error has occurred with your microphone/speaker.(104)
anyone can help me fix this problem?
thank you..So I tried the trial version but my serial number didn't work I guess because it's for a CS5.5 Web Premium product. I also tried uninstalling my current version of FB4 Standard, uninstalling CS5.5 and starting from scratch without any copies of FlashBuilder in my Applications folder and that didn't work, same error log message. I ended up reinstalling my original copy of FB4 Standard so I could continue working.
The odd thing is when I went to my MacBook Pro and uninstalled the copy of FB4 Standard I have on there and installed the CS5.5 FlashBuilder 4.5 Premium it works and started up fine. So I'm guessing there's something specific about my iMac setup that's preventing launch.
I was looking at my FB installation details, don't know if this matters but I'm running the standalone version:
Adobe Flash Builder Localized Standalone Feature 4.0.1.277662 com.adobe.flexbuilder.feature.standalone.nl1.feature.group
eclipse.application=com.adobe.flexbuilder.standalone.FlexBuilderApplication
Unfortunately it's the weekend (holiday in US too). I like the weekend for trying to get these things setup but I'm on my own and feel I'm out of luck until the work week starts.
If anyone from Adobe is reading this with a beer in one hand and hotdog in the other (or burger or veggie burger or bbq chicken leg) on a hot memorial day and have an idea on how to fix this I'd really appreciate your advice. Thanks! -
An error has occurred: "Failed to process the request."
I try to make a deploy and this error appears:
[code]An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Hide details
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Product: null, Vendor: null, Version: null, Build ID: 6.3007.00.0000.20040726091658.0000 (release=630_VAL_REL, buildtime=2004-07-29:21:25:09[UTC], changelist=267691, host=PWDFM026), Build Date: Fri May 06 16:36:04 VET 2005
Web Dynpro code generators of DC local/PruebasEstilos:
SapDictionaryGenerationCore: 6.4014.00.0000.20050818151336.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:08:16[UTC], changelist=363802, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4014.00.0000.20050818152356.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:11:31[UTC], changelist=363818, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4014.00.0000.20050818152303.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:02:18[UTC], changelist=363816, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4014.00.0000.20050905165427.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:26:46[UTC], changelist=366934, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4014.00.0000.20050905165427.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:26:46[UTC], changelist=366934, host=PWDFM026)
SapGenerationFrameworkCore: 6.4014.00.0000.20050818152155.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:01:32[UTC], changelist=363812, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4014.00.0000.20050818152737.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:15:40[UTC], changelist=363825, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4014.00.0000.20050606171352.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:05:38[UTC], changelist=351719, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4014.00.0000.20050818152303.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:02:26[UTC], changelist=363816, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4014.00.0000.20050818152737.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:16:08[UTC], changelist=363825, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows XP, version: 5.1, architecture: x86
Error stacktrace:
java.lang.NoClassDefFoundError: com/sap/tc/webdynpro/progmodel/gci/IGCIComponentDelegate
Loader Info -
ClassLoader name: [local/PruebasEstilos]
Parent loader name: [Frame ClassLoader]
References:
common:service:http;service:servlet_jsp
service:ejb
common:service:iiop;service:naming;service:p4;service:ts
service:jmsconnector
library:jsse
library:servlet
common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
library:ejb20
library:j2eeca
library:jms
library:opensql
common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:com.sap.security.core.ume.service;service:connector;service:dbpool;service:keystore;service:security;service:userstore
interface:resourcecontext_api
interface:webservices
interface:ejbserialization
sap.com/tcwddispwda
sap.com/tcwdcorecomp
service:webdynpro
service:sld
library:tcddicddicservices
library:com.sap.aii.proxy.framework
library:tcgraphicsigs
library:com.sap.mw.jco
library:com.sap.lcr.api.cimclient
library:sapxmltoolkit
library:com.sap.aii.util.rb
library:com.sap.util.monitor.jarm
library:tcddicddicruntime
library:com.sap.aii.util.xml
library:tccolapi
library:com.sap.aii.util.misc
library:tc~cmi
library:tccolruntime
Resources:
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\local\PruebasEstilos\webdynpro\public\lib\app.jar
Loading model: {parent,references,local}
The error occurred while trying to load "sap.wdp.InternalTest1".
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:328)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.<init>(DelegatingComponent.java:40)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doInit(ClientComponent.java:775)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:329)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:356)
at com.sap.tc.webdynpro.clientserver.task.Task.createApplication(Task.java:219)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:547)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:57)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:139)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:101)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:38)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:337)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:315)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:815)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:238)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:151)
[/code]
I don't know what does it mean, I will appreciate it any helpfull information as soon as possible(urgent).
TokioHi, Armin
In fact I'm using NWDS SP14 but I don't know what is the version of Web AS.
I was reading and posting few days ago some question about install and uninstall Web AS, J2EE Server, etc. I could do something but just when I' trying to deploy and run NWDS Application that error occurred.
Well, I supose in this case I have to install a new version of Web AS, from the "SDN Download Catalog" what I must to do? ...
In Download - Sneak Preview SAP NetWeaver page, what exactly I have to download to install:
<i>Download file 1 (1.9GB)
Download file 2 (1.9GB)
Download file 3 (.5GB)
Download file 4 (.8GB)</i> ?
Thanks for your help...
Tokio -
Symptom:
When you view a report with SCCM, you may encounter the following error message:
An error has occurred during report processing.
Under the details box, you can see the detailed error information as below:
System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Figure 1 is the screenshot of the error message in SCCM:
Figure 1.
Cause:
According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
Solution:
To solve this issue, you can follow the steps below:
1.
Access Report Manager URL on your reporting server.
From figure 2, you can see that the URL for Report Manager is
http://SCCM:80/Reports
in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
Figure 2.
2.
Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
Figure 3.
3. Test connection (Figure 4)
You can have a test connection to check whether the credentials stored in the report server are correct or not.
Figure 4.
4.
Modify the password or choose another authentication method
If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
5. Confirm connection
After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
Figure 5.
After all the steps above, there is no error message when viewing the report. (Figure 6)
Figure 6.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted) -
Hi,
I'm having issues with the report created using SSAS cube.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand)
The Operator_Performance cube either does not exist or has not been processed.
I have searched through internet and tried all the solutions, but didn't worked for me.
SSRS services running as NETEWORK SERVICE user.
SSRS Execution running as a Different user, which is the login is used to logon ot that server. I have also verified this user has access to database. I'm using Shared DataSource(SSAS Source) for this report.
Can any one please help me.
Thank You,
Praveen.
PraveenHello,
Have you tried it to execute on report manager , Is your data source properly configured in Report Manager and your report is mapped with Datset correctly?
Have you executed the Dataset query MDX editor now?
What is the volume of data you are fetching in the report. Try it to execute in other than IE , I don't know the exact reason but some of our report with large volume of data are failing on IE , on the other hand these reports are running fine Google
Chrome
blog:My Blog/
Hope this will help you !!!
Sanjeewan -
Hi,
Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.
In general it is no problem to generat SSRS reports, but an custom one i get issue with.
The Error:
An
error has occurred during report processing. (rsProcessingAborted)
Query
execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
ExecuteReader:
CommandText property has not been initializedHi SaiTech,
According to your description, when you render report on SCCM 2012 R2, you got the error message.
According to my knowledge, the issue can be caused by following reasons:
Select permission not granted to ConfigMgr reporting account. We need to open the SQL management console and open the properties dialog box of configmgr db, grant select and execute permission to ConfigMgr reporting account.
Reporting Services Web Service URL or Report Manager is false. Make sure Web Service URL and Report Manager URL are correct. Restart SMS_Executive service and reinstall Reporting Service Point, then please render the report again.
Report timeout. Increase query and report timeout.
If the problem remain unresolved, please provide detailed information of SRSRP.log (default location: %programfiles%\Microsoft and Configuration Manager\Logs) and reporting services error log(default location: %programfiles%\Microsoft SQL Server\<SQL
Server Instance>\Reporting Services\LogFiles), it will help us move more quickly toward a solution.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support -
Hi All,
I'm facing a strange problem..
I've developed few reports. they are working fine in develop environment. after successfull testing they were published on web.
in web version, all reports are executing for first time.. if I change any of parameters values or without chaning also..
if I press "View Report" following error occurs..
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'dsMLGDB2Odbc'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
please suggest any alternative ways to overcome this issue
thanks in adv.in my case the problem is
one virtual machine is for developers
other for testers
in developers i created a report, then save like *.rdl and copy to testers machine, does not work there
the error what testers get is
Error during the local report processing.
Could not find a web-based application at http://developersMachine/AnalyticsReports/DataBaseConnector.rsds
and the solution is to use alternative url or in some cases http://localhost/ -
click report error:
log file:
processing!ReportServer_0-2!104c!04/27/2015-19:15:21:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing.
---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for dataset 'dsPriority'.
---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Query (26, 25) The ALLMEMBERS function expects a hierarchy expression for the argument. A member expression was used.
at Microsoft.AnalysisServices.AdomdClient.AdomdDataReader..ctor(XmlReader xmlReader, CommandBehavior commandBehavior, AdomdConnection connection)
at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunDataSetQuery()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunDataSetQuery()
at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.Process()
at Microsoft.ReportingServices.OnDemandProcessing.RuntimeParameterDataSet.Process()
at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.ProcessConcurrent(Object threadSet)
--- End of inner exception stack trace ---
open http://localhost:8080/tfs/TeamFoundation/Administration/v3.0/WarehouseControlService.asmx?op=ProcessWarehouse click Invoke:
System.Web.Services.Protocols.SoapException: TF221029: Reporting for Team Foundation Server does not have any warehouse jobs defined. Use the Team Foundation Administration Console to rebuild the reporting. : 2015-04-27T19:30:29:782 ---> System.InvalidOperationException:
TF221029: Reporting for Team Foundation Server does not have any warehouse jobs defined. Use the Team Foundation Administration Console to rebuild the reporting. at Microsoft.TeamFoundation.Warehouse.WarehouseAdmin.QueueJobs(String collectionName, String jobName)
at Microsoft.TeamFoundation.Warehouse.WarehouseControlWebService.ProcessWarehouse(String collectionName, String jobName) --- End of inner exception stack trace --- at Microsoft.TeamFoundation.Warehouse.WarehouseControlWebService.ProcessWarehouse(String collectionName,
String jobName)Hi shelman,
I'd like to know whether you configured TFS reporting service properly, and if you can get the report normally before. From the error message, you might has wrong data source or the parameters of the dataset 'dsPriority'. You can check whether the data source
for your report is available, try to use windows authentication. Or check the parameters of dataset 'dsPriority' make sure the query works when you execute it manually.
To process the TFS data warehouse and analysis services cube, I'd like to know which operation you selected before clicking Invoke button. Please follow the instructions on this
page to process TFS data warehouse and analysis service cube manually. You can also refer the James's last reply in this
thread or this
blog to check if the solutions work for you.
Another option is run TFS best practice analyzer to check if there any configure issues on your TFS server machine. And check event logs to see if there any useful information, elaborate more details about your scenario including reproduce steps if the problem
persists.
Best regards, -
CRM 2011+An error has occurred during report processing. (rsProcessingAborted)
Hi,
i have installed CRM 2011 on-premise version in Server A. Database and CRM 2011 Reporting Extenison in Server B. Both the server are 64 bit server and IIS 7.0 . i can able to browse the Report server url. USer as been added in Sql DB Logins and
as permission to Reportserver and ReportservertempDB.
i can able to access the CRM Reports only using Admin Credenttials that is from the credential which Report server is installed and configured
Error in server 1:
Web service request SetDataSourceCredentials to Report Server
(http://servername/Reportserver_XXXSQLSRVR)failed with SoapException. Error: An error has occurred during report processing. (rsProcessingAborted).
Error in Server 2: took this error From error log file
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Data source 'CRM': An error has occurred. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: An exception has occurred in data source 'CRM'. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: i INFO: DataPrefetch abort handler called for Report with ID=. Aborting data sources ...
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'.
---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException: Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
Eventvwr error in server 2:
Failed to unload app domain DefaultDomain. The following exception occurred: Error while unloading appdomain. (Exception from HRESULT: 0x80131015).
I tried the Following ways to fix it
1.added User as content manager
2.In CRM apppool i have Admin in identity column
its really paining when i'm unable to access the CRM 2011 Default Reports. got stucked for a day.
Thanks, Saraswathy KumaraveluHi All,
I encountered this same issue today after installing CRM 2011.
CRM 2011 on Server A
SQL and SSRS 2008 R2 on Server B
I found that I got the same errors described here when running the standard reports even after I had installed the Reporting Extension (CRM 2011 replacement for CRM 4.0 Data Connector). The reason I got the error was because the 'Data Source Type' had not
been updated in Report Manager.
Here's how I resolved:
1. Browse to Report Manager (http://SERVERB/Reports)
2. Open the Organisation_MSCRM folder
3. Click Show Details
4. Open the MSCRM_DataSource
5. Change the Data Source Type from Microsoft SQL Server
to Microsoft Dynamics CRM SQL
*Note: - This option is only available once Reporting Extension has been installed on SSRS Server.
6. Clear the contents of the Connection String box
7. Set the Connect Using: option to Credentials Supplied by user running the report
but do NOT check the
Use as Windows Credentials when connecting to the DataSource option.
8. Click Apply
9. Restart the SQL Reporting Services Service in
Reporting Services Configuration Manager
10. Test by running one of the Standard CRM Reports (e.g. User Summary)
Ta Da!! - Success!!
Hope this helps! -
An error has occurred during report processing. (rsProcessingAborted)
Access Web Databases and SSRS
Issue:
After creating an access web database, such as Contacts Web Database in SharePoint 2010 we receive the following error when trying reports. This only happens on the Address Book, Phone Book, and Contact List reports. The Contact
Details and Printable Labels reports both work. The reports do not begin to error until data is added to the database (no errors initially).
I have duplicated this across all of our environments with the same results and get similar results when adding a Projects Web Database.
Environment:
Prod:
3 WFE Servers – SP 2010 sp1
3 App Servers – SP 2010 sp1
2 SQL Servers – 2012 sp1
QA:
3 WFE Servers – SP 2010 sp1
3 App Servers – SP 2010 sp1
2 SQL Servers – 2012 sp1
DEV:
1 WFE/App Server – SP 2010 sp1
1 SQL Server – 2012 sp1
Background
SSRS was installed following recommended guidelines and can be verified to be working. http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=66
Error full text
Microsoft SQL Server Reporting Services
An error has occurred during report processing. (rsProcessingAborted)
The Group expression for the grouping ‘Group1’ contains an error: Request for the permission of type 'Microsoft.Office.Access.Server.Security.AccessServicesPermission,
Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' failed. (rsRuntimeErrorInExpression)Found the answer
here.
In short, SSRS 2012 installation missed a couple of config entries. You'll have to add them yourself:
Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting\rsreportserver.config. Search for the <Data> tag and add this entry:
<Extension Name="ADS" Type="Microsoft.Office.Access.Reports.DataProcessing.AdsConnection, Microsoft.Office.Access.Server.DataServer, Version=14.0.0.0, Culture=Neutral, PublicKeyToken=71e9bce111e9429c" />
Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\WebServices\Reporting\rssrvpolicy.config.
Search for <NamedPermissionSets> and add this entry:
<PermissionSet
class="NamedPermissionSet"
version="1"
Name="ReportExpressionsDefaultPermissionSet">
<IPermission class="SecurityPermission" version="1" Flags="Execution" />
<IPermission class="Microsoft.Office.Access.Server.Security.AccessServicesPermission, Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" version="1.0" Flags="CalculationCallback" />
</PermissionSet>
In the <CodeGroup>node, around line 70, find and change PermissionSetName from “Execution” to “ReportExpressionsDefaultPermissionSet” -
OAS 4.0.8.1 - An application error has occured
Hi !!!!
I have created an small servlet application: HelloServlet.
I have followed the instructions of tutorial contained in the Developer's Guide
I have compiled the servlet without problems.
But When I write the URL in my browser
http//host.domain:port/virtual_path/HelloServlet
occurs the next:
"An application error has occured. Please try again."
Also I have created a DAD for accesing a database Oracle8i 8.1.5 existing in the same machine but other ORACLE_HOME that OAS.
Then, I installed the utilies: Logger Tables, PL/SQL Toolkit, Log Analyzer and Database Browser, in this order.
But, when I try to access the Database Browser utility appears the same message:
"An application error has occured. Please try again".
Any help well be appreciated???
Many thanks.
SergioHi !!!
I have created several servlets.
1.-HelloServlets
2.-a servlet with database access.
But, when I am going to deploy from my browser, then next message appears
An application error has occured. Please try again.
I increase the virtual memory but this I do not work.
I check the wrb.log file and there isn't a error that to me it orients. My severity leves is 15.
Now, my application log file, named jservlets.log, has the next error, but I don't understand it:
`An internal error has occurred: can't find cartridge class name. Please try again.`
`Java cartridge runtime initialization complete.
I Already don't know to do.
Any help will be very appreciated.
Thanks
Sergio
null -
SCCM 2012 An error has occurred during report processing (rsProcessingAborted)
I have this error on some reports i try to run in my customer
i rebuild all the Database and add the security rule for the report database
i gave the user Logon locally rights ,(and run as a services) also run as sysadmin
here is the error
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
here is a log srsrp.log:
System.Web.Services.Protocols.SoapException: The policy for '#######\IT Department' user or group is not valid. The role assignment is either empty, specifies a user or group name that is already used in an existing role assignment for the current item,
or specifies duplicate roles for the same user or group. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidPolicyDefinitionException: The policy for '#######\IT Department' user or group is not valid. The role assignment is either empty, specifies
a user or group name that is already used in an existing role assignment for the current item, or specifies duplicate roles for the same user or group.~ at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetPolicies(String Item,
Policy[] Policies)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.SetPolicies(String Item, Policy[] Policies)ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted) -
Error has occurred in workflow processing
Hi All,
The email notification sent back to employees to notify them that the timecard was submitted successfully is erroring. I looked in the workflow administrator resp and noticed the employee notifications were failing.
Please see the below error:
Failed Activity Notifications to Employee (FYI)
Activity Type Notice
Error Name WF_ERROR
Error Message 9004: An error has occurred in workflow processing: 3835: Error '-20002 - ORA-20002: 2018: Unable to generate the notification XML. Caused by: 2323: Message template 'NOTE_EMP' in item type 'WFMAIL' can not be found WF_MAIL.getTemplateName(nid => 882116, n_status => OPEN, n_mstatus => MAIL, t_type => WFMAIL, t_name => NOTE_EMP) WF_MAIL.getTemplateName(882116, OPEN, MAIL, WFMAIL, NOTE_EMP) WF_MAIL.ProcessSignaturePolicy(882116)' encountered during execution of Generate function 'WF_XML.Generate' for event 'oracle.apps.wf.notification.send'.. The stack trace of the error is: WF_MAIL.GetLOBMessage3(882116, WFMAIL, 2323: Message template 'NOTE_EMP' in item type 'WFMAIL' can not be found WF_MAIL.getTemplateName(nid => 882116, n_status => OPEN, n_mstatus => MAIL, t_type => WFMAIL, t_name => NOTE_EMP) WF_MAIL.getTemplateName(882116, OPEN, MAIL, WFMAIL, NOTE_EMP) WF_MAIL.ProcessSignaturePolicy(882116), Step -> Getting Signature policy) WF_XML.GenerateDoc(oracle.apps.wf.notification.send, 882116) WF_XML.Generate(oracle.apps.wf.notification.send, 882116) WF_XML.Generate(oracle.apps.wf.notification.send, 882116) Wf_Event.setMessage(oracle.apps.wf.notification.send, 882116, WF_XML.Generate) Wf_Event.dispatch_internal()
Can any one help me how to fix this issue?
Thanks & regards,
RajuHi,
You can reset the template in the frontend System Administrator -> OAM -> Workflow -> View Details -> Edit.
OR
You can override the template as i mentioned in the prevoius post by including a attribute in the respective message(Refer Workflow Developer's guide for more details). -
I am getting an error message "An authentication error has occurred using your Adobe ID. (SHARED_UNKNOWN_ERROR)" when I press PUBLISH site in Muse.
Hi,
From Help Menu-> Sign out and Close Muse.
Restart Muse, and from Help menu-> Sign in again.
And see if that resolves the issue. -
IOS 8.1.3: an error has occurred with your microphone/speaker
Hi,
I have this problem with my girlfriend.
Recently, we just upgraded from IOS7 to IOS8.1.3.
We are frequent facetime users as we use it via Wifi and 3G connections.
After the update, there are many annoying facetime issues occurred while we were trying to call each other.
Below are the examples:
1. An error has occurred with your microphone/speaker (T104):
Explanation:
After a few tries to call via facetime, we are always stucked at "Connecting...". So we gave up. We changed to use other apps, such as Line to call. However, I noticed that the speaker volume button will not work anymore. Volume up/down do not have any functions. Even calling with other apps, will have this error. So the only solution is to restart the phone. We need to restart almost everyday now.
2. No Network Connection:
Explanation: I am using the same Wifi connection everyday at home. Sometimes this error pops up. No other solution but must restart the phone to use facetime. No problem using the same Wifi in other apps.Greetings Eelnoow,
If you are having an issue with getting FaceTime to function properly, I would suggest that you troubleshoot using the steps in this article -
FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L
Maybe you are looking for
-
Itunes store will not load. I can access my music library but thats as far as i can go
I can access my itunes library but I can not get the store to load or the itunes helper. I disabled my firewall and pop ups, tryed the dns flush and deleted bonjour. Still nothing?? Very frustrated! Could there be a screen resolution conflict or some
-
How to retrieve string array using Session?
Hi, I am having some problem retrieving string arrays through session. String personalData[] = new String[17]; personalData = (String [])session.getValue("PersonalData"); The coding above isn't working. Advise pls.. Thanks
-
Overview of the users in a role
Hi all, is it possible to see in the user role, which users are assigned to this role? Thank you in advance and regards Kathrin
-
Olympus PEN E-P3 camera videos to iMovie.
I am new to iMovies '09. I recently got an Olympus PEN E-P3 camera. I recorded videos and want to edit them using iMovies. However, I can't seem to watch the videos or import them into iMovie. The videos are AVCDH, there is a clip folder (CPI) and a
-
Video capturing devices !
Hi every body ! Can any body please give me the list of all online video streaming JMF compatable video capturing devices! any response will be highy appreciated. please try to be specific to the company and model because i am going to buy one! Thank