Application error in Event viewer Event ID :6398 The Execute method of job definition Microsoft.SharePoint.Search.Administration.SPSearchJobDefinition

Hi Friends,
On SharePoint 2010 application server I can see this error on event viewer for every one hour it is repeating. Please look at the screenshot below. I restarted the SharePoint search service 14 and SharePoint foundation search v4. but it is not solved
the issue.
Please look at the error below and help me to fix this issue .
Thanks
valmeekeshwar

Try this
https://sharemypoint.wordpress.com/2007/12/18/error-event-id-6398-and-6482-about-security-rights-of-osearch-service/
Stacy www.sharepointpapa.com

Similar Messages

He XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side

hi experts ,
we are using classic scenario (ECC 6.6 & SRM 7.0)
we have are configured Procure-to-Pay Scenario ,Note 1263876 - SAP SRM: Configuration of Procure-to-Pay Scenario.
but facing issue.
The XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side. So we are not able to see the PR in the Sourcing cockpit in SRM.
error as below
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/SE/Global">ExchangeFaultData</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi Vijay,
Can you tell us the interface name?
If it is stuck in FEH (Application Error) in SRM then you can check the detail error by going into tcode /n/sappo/ppo2.
You need to enter the Business Process, Order Assignment and Mode Of Postprocessing Order and then execute.
It will show you all the messages stuck in application error for that interface and if you double click on any one of them you will get to see the detailed error with options to Discard, Repeat etc.
Let us know if this helps you.
Regards,
Mayur

Error while Using the Visual Basic Script Job Definition Type for Non-SAP

Hi,
when using VBScript Job Definition Type I got the following Error:
Input Error: There is no file extension in "C:\Program".
When I run the Script locally on the Server it runs fine.
Using CMD Job definition on the same platform agent runs also fine.
Is there maybe a wrong setting or are there any parameters to configure to run VBScript Job definition ?
Best Regards Torsten Rehage

Hi,
yes it is a bug. I had contact with my redwood consultant.
He sends the error to the developer. I set the datarootdirectory to a path without blanks and it works.
Thanks
Torsten

Error while running Profile synchronization (Event ID: 6398)

Hi,
We had our User Profile Synchronization service in stopped state for quite some time due to our SQL server having "Named Instance". Since RTM version had this compatibility issue, I patched my farm with SP2 + FEB 2014 CU.
Now the "User Profile Synchronization Service" is running (I started it and now it was a success). However when I start the Profile sync job (either INC or FULL), it fails. This is the error I get:
The Execute method of job definition Microsoft.Office.Server.UserProfiles.UserProfileImportJob (ID c10650ed-0935-47a5-b3ce-a307c576ad9a) threw an exception. More information is included below.
Operation is not valid due to the current state of the object.
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/25/2014 3:47:16 AM
Event ID: 6398
Task Category: Timer
Level: Critical
Keywords:
User: ST\sps02-svc
Computer: EMEA-MOSS1.st.stroot.local
Description:
The Execute method of job definition Microsoft.Office.Server.UserProfiles.UserProfileImportJob (ID c10650ed-0935-47a5-b3ce-a307c576ad9a) threw an exception. More information is included below.
Operation is not valid due to the current state of the object.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>6398</EventID>
<Version>14</Version>
<Level>1</Level>
<Task>12</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-25T03:47:16.577398600Z" />
<EventRecordID>484089</EventRecordID>
<Correlation ActivityID="{A6F9E131-4925-4889-A759-5F873C4B2E74}" />
<Execution ProcessID="9140" ThreadID="7372" />
<Channel>Application</Channel>
<Computer>EMEA-MOSS1.st.stroot.local</Computer>
<Security UserID="S-1-5-21-1058282146-1732951074-3797079023-18290" />
</System>
<EventData>
<Data Name="string0">Microsoft.Office.Server.UserProfiles.UserProfileImportJob</Data>
<Data Name="string1">c10650ed-0935-47a5-b3ce-a307c576ad9a</Data>
<Data Name="string2">Operation is not valid due to the current state of the object.</Data>
</EventData>
</Event>
Here are the observations:
- User Profile Synchronization Service - Running
- User Profile Service - Running
- Both FIMS - Running
- On User Profile Service Application page, I see "User Profile Sync is not currently provisioned."
- If I go in for "Configure Sync Connections" I see --- The query returns nothing.
- On clicking "Create new connection" I get this error:
What could be wrong now?

Clear the file system cache on all servers in the server farm on which the Windows SharePoint Services Timer service is running. Please refer to the following link:
http://ahmedmadany.wordpress.com/2011/05/08/user-profile-service-an-update-conflict-has-occurred-and-you-must-re-try-this-action/
Make sure that the SharePoint Farm account, which is created during the SharePoint Farm setup, is a member of the local Administrators group where the User Profile Synchronization service is deployed.
Make sure that the SharePoint Farm account is able to log on locally on the server where User Profile Synchronization is deployed.
More information are provided in the link below:
http://www.sysadminsblog.com/microsoft/user-profile-service-an-update-conflict-has-occurred-and-you-must-re-try-this-action/
http://www.sysadminsblog.com/microsoft/event-6398-microsoft-sharepoint-administration-spsqmtimerjobdefinition-exception/
If this helped you resolve your issue, please mark it Answered

Sharepoint FBA web application error: Server Error in '/' Application. when login to the web application

Hello Team,
I have configured FBA in SharePoint 2010. After the FBA i can get the SQL users using people picker and added users as a site collection admin.
When i tried to access the site, it shows login page and i have given user name and password then pressed signin button, it's try to redirect the another page and showing below error,
Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed.
Details: To enable the details of this specific error message to be viewable on the local server machine, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application.
This <customErrors> tag should then have its "mode" attribute set to "RemoteOnly". To enable the details to be viewable on remote machines, please set "mode" to "Off".

<configuration>
<system.web>
<customErrors mode="RemoteOnly"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="On" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
"An exception occurred when trying to issue security token: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.19 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'..
I checked sharepoint logs and didn't see any log. but i can see below error logged in Event viewer application logs,
I tried changing all customErrors mode and still same error.
Kindly help me on this, how to resolve the issue.
Thanks in advance.
JP

Hi,
According to your description, my understanding is that the error occurred when you accessed SharePoint site through form based authentication.
How did you configure the form based authentication?
Here is a link about the steps required to configure FBA in SharePoint 2010 for your reference, and check the steps to see if there anything wrong in your configuration:
http://www.codeproject.com/Articles/352841/How-to-Configure-Form-Based-Authentication-FBA-in
Through the common error message, we cannot find what exactly caused the error.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the?forum=sharepointgeneralprevious
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Explorer.exe application error "Memory could not be written" ?! OS seems stuck now

(Model # m6-k010dx) My new laptop after 13 months automatically updated from windows 8 to 8.1 after I had said 'no' as many times as it allowed. After the update my files are still on it and most things are there but it seems 'stuck' and the orange screen keeps flickering like start to desktop so fast you usually can't even click anything in time to open it before it switches. I was told that the drivers probably needed to be updated first (eventhough I am pretty sure I kept up with all my other updates that popped up the only one I postponed was 8.1) and that I should refresh it, so I lose my programs but keep my files. I'm so sad I now lost Photoshop cs6 and my prefered antivirus (webroot) But anyway back to 8.0, it functioned fine aside from annoying pop ups to install norton antivirus no thank you, i bought webroot again. no updates were available.
I went to HP.com drivers update, searched for my pc and its correct update, and next thing I know is it's installing windows 8.1....??!
So again when it's 'done' and reboots, the screens flicker forever. I shut down, restart, same. so I put it back to windows 8...it will install 8.1 on its own any day now.. Please help asap!!!
Also forgot to mention when the screens are flickering, a few explorer exe application errors pop up on occaision. IE: "the instruction at 0xaa0c663c referenced memory at 0xaa0c663c. The memory could not be written. Click ok to terminate the program." was one the last time,
and the time before it, the initial windows 8.1 update when I still had Webroot antivirus, the pop up said "the instruction at 0x9b63663c referenced memory at 0x9b63663c. The memory could not be written. Click ok to terminate the program." the other pop ups the initial time came from Webroot - IE: "This file is trying to install itself to start every time the computer turns on C: /Windows/system32/DrvInst (dot) exe" and gives the options to block, allow once, or allow always.
Another trying to install every time computer starts is "C: /WINDOWS/system32/wbem/WMIADAP (dot) EXE"
and another is : "Process ID: 4244
Thread ID: 3460
Event Type: Registry
Access: Write
Registry Key: /REGISTRY/MACHINE/SYSTEM/ControlSet001/Services/NDIS/IfTypes/131
Value: IfUsedNetLuidIndices"
I searched all of those but found nothing. How can I have a smooth update? THank you in advance

Hi @ASAP666 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY m6-k010dx Sleekbook and trying to update to Windows 8.1. Before updating did you make sure your system was up to date with Windows. Here is something from Microsoft that might help.
Looking into this I have found that it is a driver issue usually associated with USB devices.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue.
I recommend to do this update to disable your Anti Virus or Webroot temporarily to allow the update to go through.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

CCMS - Missing APPLICATION ERRORS

Hi Experts,
When i go to the CCMS monitoring RZ21 transaction under the node integration server i'm only able to see the node System Errors and the other node Application Errors is missing. I've done the GRMG configuartion and i can also view the XI Repository, XI directory heartbeats .
what should i do inorder for the application errors node to appear so that i can see each of the namespaces.
regards,
Rahul.

Hi Rahul,
Apply SAP Note 936558 - SAP XI alert monitor: 'Application errors' subtree missing
Regards,
Prateek

What does this mean? Server Error in '/BoardPortal' Application. Runtime Error Description: An application error occurred on the server. The current custom err

Server Error in '/BoardPortal' Application. 
Runtime Error 
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
 
 
<pre><nowiki>
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
</nowiki></pre>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
 
 
<pre><nowiki>
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration></nowiki></pre>

That is a problem on the web server that you are trying to access. 
This may need to be fixed at that server.
Try to clear the cache and the cookies from sites that cause the problems to see if that helps.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"

How to catch SAP application errors in BPM.

Hi,
I have a IDOC to Soap Sync Scenario where I send the message to a Webservice. I have used a BPM since we need to catch the resposne of this message and map it to a RFC. For ex if I get a success resposne I need to map success if not than I need to catch the error and map it to the RFC. Now here in some cases like if the target system (webservice) is down than XI raises a sap application error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection refused (errno:239)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Normally XI stops the process in these cases and does not proceed to the next step but I need to catch this message and map the content in the AdditionalText to the target RFC. Can anyone let me know how to catch this SAP Application Error in BPM and map it to the RFC.
Thanks,
Bhargav

Hi Gaurav,
As I have mentioned I need to catch the application error in the BPM. If you see the discussion that is mentioned after the blog you have mentioned it is stated that the fault messages or the application error cannot be caught in BPM.
In the blog that you stated we can catch the fault message and map it to a message structure but only to that extent after that it would stop the BPM process at that step but would not proceed further as shown in the screenshot given in the blog it would fail as "application error restart not possible".
I need to proceed further and capture this error to an RFC Structure and call a proxy.
Here after the error it does not proceed to the next step.
Thanks,
Bhargav

Internal application error in scheduling a dis file.

Hi friends , i am finding a problem in scheduling a dis file . discoverer says internal application error. some other files are getting scheduled. the query for this particaular report is long. any suggestions , its urgent.................. discoverer version is 4.1 .

Hi,
Not really enough informatoin to debug via a forum, you may need a Service Request with Oracle Support. If staying on 4.1 (recommend 10.1.2.0.2), I suggest you are patched to 4.1.48.08
Additionally, ensure the worksheet runs to completion without scheduling... since you mentioned it is long you may need to increase the data cache, etc.
Regards,
Steve

CCMS for application errors in SAP R/3

Hi Experts,
I am working on File->ABAP Proxy scenario.
My client has configured CCMS in solution manager system to receive alerts from PI as well as from SAP ECC system.
One thing which is not clear to me is how to capture the application errors raised in ABAP proxy (server proxy) in CCMS. I am not clear on below points.
1. Is it required to trigger SALERT_CREATE explicitly in ABAP proxy to trigger alerts in case of application errors?
2. Where to define the alerts using ALRTCATDEF? Is it in SAP ECC or in SAP PI?
3. Do I need to create alert rule in PI RWB for alerts related to application errors occurring in SAP ECC?
I have read the blogs and referred the threads related to CCMS but I could not get much on above mentioned points. Could you please help me in this regard?
Thanks a lot.
Regards,
Prasad

CCMS alerting is different than the alerting available with SAP PI. Therefore when you already have a CCMS setup, there is no need for ALRTCATDEF, PI RWB setup.
Regards,
Prateek

I can't not open pdf files give acro missing compwclass acrord32.exe application error

I can't not open pdf files give acro missing compwclass acrord32.exe application error any fixes known. I did the repair on the program

What is your operating system? Reader version?

Send Synchronous step in BPM - showing application error in sxmb_moni

Hi
We have a cc bpm in which we have a send - syncrhonous step - a call to an external webservice and synchronously getting a response back.
Now, owing to a application condition when invoking the webservice , the response received after being mapped back into the BPM, the status is set is being set to application error ( without a restart ) in sxmb_moni and the bpm gets a response in the fault structure from the webservice
My understanding is that the web service implementation sets this application error status after sending the appropriate response in the fault structure . We want the cc BPM to continue to the next step - which is - taking this response in the fault structure from this webservice and communicating it out - in another send step.
But owing to the application error in the synchronous send step , the BPM instance stops right there without proceeding to the next send step - after this ?
How do we make the cc BPM not stop after getting the fault response and the application error ?

Insert an Exception Branch by rightclicking on the block and choose insert.
In the send step under Exceptions you can point to the created exception branch.
In the exception branch you can now handle what to do when it fails.
Edited by: Christian Vilhelm Henriksen on Mar 16, 2010 1:09 PM

Windows 8.1 - "explorer.exe - Application Error" during shutdown process

Hi,
After I upgrade to Window 8.1, i get "explorer.exe - Application Error" dialog every shutdown.
It contain: "The instruction at 0x74fd40b9 referenced memory at 0x00000000. The memory could not be read.
Click OK to terminate the program
Click on CANCEL to debug the program."
(Sorry, my account can't post link or image. So i can't show you the picture capture)
When I had used Window 8, it didn't happen.
Please help me to solve this problem.
My machine is: HP ENVY DV6 7214nr.
Thanks,
Tan Nguyen

I am having the issue when shutting down windows 8.1. Did not occur before the update with Windows 8. At shut down, Pop up displays for only a few seconds. HP Envy I7.
Explorer.exe - Application Error
The instruction at 0xa73640b9 referenced memory at 0x00000000. The memory could not be read.
Click on OK to termintate the program.
When I start the PC, and shut it down after a few minutes of running, this error does not occur. Only after the PC has been on for awhile and I have used several programs.
And for those of us unfamiliar with creating a Reg entry, the instruction are not very clear. Once I create this text file...what do I call it and where and how do I insert it....?
UPDATE Problem fixed: I followed the suggestions of a Windows 8 clean boot from Microsoft.
After going through the running applications one by one, I finally isolated the problem on my HP Envy to the Bluetooth Application. I disabled the Bluetooth task in Startup and made sure it did not load. Afterward, no more Explorer.exe - Application
Error when I shut down the PC. This program is a Ralink Bluetooth driver and exe. program running on startup. I am not sure if HP has offered an updated driver for it as of yet.....

Flash Player 14.0.0.179 Application Error

I keep getting the following Application Error message.
I have tried reloading the program but the problem persists, I am using Firefox 31 on Windows 7 OS
Any ideas how I can solve this issue.

I have found sometimes you need to run Adobe's Flash uninstaller, before running the installer.
Typically the first whole number of a version is usually a major upgrade, versus an update, and hence why the built-in update function fails to see the new version on many software.
As for "safe", clone backup in case there is a feature you don't like about the new version, so you can always run it like it was before.
https://discussions.apple.com/docs/DOC-1992
You don't know how Adobe might alter the overall PDF frameworks on the computer when the upgrade is completed. If you don't clone, you may find yourself stuck with whatever changes they make.

Application error in Event viewer Event ID :6398 The Execute method of job definition Microsoft.SharePoint.Search.Administration.SPSearchJobDefinition

Similar Messages

Maybe you are looking for