Application error occurred during the request processing-notes 1507568

Hi,
We have a serious issue with my PI proto system. The issue is the Admin team has applied Notes 1507568 for 7.11 SP4. After that the system seems to be unavailable. I am  now not able to access any ESR,ID, RWB and SR.
When i am trying to open that i am getting an error like,
Error: "Application error occurred during the request processing."
Details: java.lang.NullPointerException
     at com.sap.bc.proj.jstartup.sadm.ShmWebSession.findSession(ShmWebSession.java:299)
     at com.sap.bc.proj.jstartup.sadm.ShmWebSession.findSession(ShmWebSession.java:333)
     at com.sap.engine.session.runtime.http.HttpRuntimeSessionModel.activateShmSlot(HttpRuntimeSessionModel.java:341)
     at com.sap.engine.session.runtime.http.HttpRuntimeSessionModel.beforeActivate( Looks like a security patch. We have some serious developments to be done ASAP.
Could some one help me to fix this issue?
May be you people can help me to doing the roll back to the security notes that we applied?
Thank you very much in advance.
Best Regards,
Prasad.
Edited by: PrasadBabu Koribilli on Jun 15, 2011 4:23 AM

Hi,
I face exactly the same problem after an upgrade of the component SERVERCORE04P_32 on Windows. This patch works well on Linux, did you find a solution?
Thanks,
Anne-Lise

Similar Messages

  • Application error occurred during the request procession.

    Hi all
    i am geeting this error when i am ruuning my JSP page through NWDS.
    Application error occurred during the request procession.
      Details:     com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException:
      Error compiling [/InvokeProxy.jsp] of alias [ProxySenderWeb] of J2EE application [sap.com/Refrence].
    Exception id: [001279D06B4E00C6000027C700002DFC000445047AAE5AD8]
    Thanks in advance

    Dear Kunnal,
    Please share your solution with the community.
    Thank you.

  • Error: "Application error occurred during the request processing

    Hello,
    I have successfully installed NW7 CE with MaxDB database. Then trying to logon to NWA/User Admin etc, & couldn't logon. Getting the following error.
    I am using Internet exploreer 7
      500   Internal Server Error
      SAP NetWeaver Application Server 7.11 / AS Java 7.11 
      Error: "Application error occurred during the request processing."
      Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
    Details: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to retrieve client for current request. Causing exception is  nested.
         at com.sap.tc.webdynpro.clientserver.task.Task.getClient(Task.java:493)
         at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.checkAuthentication(ClientUserFactory.java:200)
         at com.sap.tc.webdynpro.serverimpl.core.um.AbstractClientUserFactory$1.checkAuthentication(AbstractClientUserFactory.java:151)
         at com.sap.tc.webdynpro.services.sal.um.api.WDClientUser.checkAuthentication(WDClientUser.java:214)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.checkAuthentication(RequestManager.java:713)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:237)
         at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:202)
         at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
         at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:127)
         at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
         at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToRequestManager(ExecutionContextDispatcher.java:140)
         at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:92)
         at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:104)
         at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
         at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doGet(AbstractDispatcherServlet.java:54)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
         at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:466)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
         at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
         at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
         at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:425)
         at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)
         at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
    Caused by: com.sap.tc.webdynpro.services.cal.core.exceptions.WDClientException: Found no client: clientNameReqParam=null, clientNameAppParam=null, useragent=Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; Trident/4.0; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
         at com.sap.tc.webdynpro.clientserver.cal.ClientInspector.findClientContainer(ClientInspector.java:212)
         at com.sap.tc.webdynpro.clientserver.cal.ClientInspector.getClient(ClientInspector.java:104)
         at com.sap.tc.webdynpro.clientserver.task.Task.getClient(Task.java:491)
         ... 51 more
    Checked hostname resolution, check any network issues...everything looks good. Suggest a solution.

    It's a problem with the browser.
    Please try the following possiblities:
    - use a different browser or at least a different IE-Version
    - restart the problems (helped me several times)
    - try comptability view in IE
    Regards
    Adrian

  • Error 500: Application error occurred during the request processing

    hello gurus!
    One thing very strange happened to me, we have a PI 7.1 EP 1, I imported a file. tpz in the Enterprise Service Repository, exported from PI 7.1. and suddenly everything stopped working, the SLD, the SR, the directory, the repository .....
    When we tried to access anything in the browser gives us:
    Error 500: Application During The error occurred processing request.
    The basic team, don`t  know the reason, they reset PI but is still not working
    nothing.
    Can you help please?
    Thank you so much.

    *Hello Luis,*
    *I follow the instructions to do the export / import. Basic team, uptade version kernel and Netweaver Administration and Administration Options, work, but Integration Builder and Enterprise Service Repository don't work.*
    *I don't understand, they applies the changes of OSS 1495500.*
    *Any idea to do work Integration Builder and Enterprise Service Repository?*
    *The details of error are:*<!-- ==================================================================
            ATTENTION: When modifying references in this file, remember to update
                       the corresponding files from the test-apps too!
                      (see repository_test.jnlp in &quot;_ibrep_test/webapp/start&quot; )
            =================================================================== ><!Do not define parts or packages! This will be done automatically ><! XI jars -->
            <!-- Maestro><!jar href=&quot;repository/maestro_ib.jar&quot; download=&quot;lazy&quot; /-->
            <!-- end Maestro><! Aris Client -->
            <!-- only for repository, when build is adapted
            &lt;jar href=&quot;repository/sapjco.jar&quot; download=&quot;lazy&quot; component=&quot;aris&quot;/&gt;
            &lt;nativelib href=&quot;repository/sap-rfc-windows.jar&quot; download=&quot;lazy&quot; component=&quot;aris&quot;/&gt;
    ><! end Aris ><! ssl libs -->
            <property name="jnlp.com.sap.aii.ib.client.properties" value="com.sap.aii.ib.client., com.sap.aii.ib.core., com.sap.aii.util.xml., com.sap.aii.connect., com.sap.aii.repository.mapping.additionaltypes, com.sap.aii.docu., com.sap.aii.ibrep.core., com.sap.aii.ibdir.core.*"/><property name="jnlp.com.
    jnlp file truncated after 10K
    Thanks in advanced!
    Regards.
    Verónica.

  • Problem: An error occured during the uploading process.

    Hello!  I've searched around but I am having difficulty finding a solution to this problem.
    I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab.  This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process.  Please try again later."  However, it eventually started working.  It is now a few weeks later, and I am having the very same issue.  I am unable to upload to YouTube or any other service through the Share tab.  Even loading the software itself, the opening splash screen is unable to grab my Adobe ID.  It never stops "Gathering User Info..."
    Steps I have tried:
    Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
    Checked router settings.
    Enabled DMZ on router and linked it to this specific computer.
    Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
    I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software.  This has continued to baffle me though, and finding help is difficult.  Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
    I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video.  The YouTube HD setting has been great for me in the past, as files are small but still look great online.  I would really like to get it working again, both for ease and convenience for simple projects.
    If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice.  In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
    I don't believe it matters in this situation, but just in case:
    Windows 7
    AMD Phenom II X4 820 - 2.80 GHz
    6 GB RAM
    Radeon HD 5880 1GB
    Connecting through a Netgear WNDR3400 router, standard DSL connection.

    Sorry, not seeing where to edit my original post.
    Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser.  So I am not being blocked somehow to those particular sites.  It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
    Additionally, the only virus software running is Microsoft Security Essentials.  It has never raised a flag before with this software or caused interference in the past.  I do not use Norton or any other service which are known to interfere with programs often.
    Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine.  As you can see in this image though, it cannot seem to ever connect and grab my user information.
    http://i.imgur.com/S53xN.png

  • An error occurred during the installation process: error occurred while installing additional adobe

    I get this message: An error occurred during the installation process: error occurred while installing additional adobe packages. when trying to install CS2 InDesign UPGRADE from id 2 on new IMAC 2.4 GHz 4 GB. 

Any one else with same issue? 

Trevor

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

  • An error occurred during the submit process. Unknown failure

    in forms central, when i submit a form via reader v11 the error An error occurred during the submit process. Unknown failure. The form can be submitted with adobe professional 11.

    Hi,
    would you please describe the error message or  insert a image to here? and if you can share your pdf form to me, that's would be very help us to reproduce and resove the issue. my email: [email protected]
    Thanks,
    Guanshuai

  • Error occurred during the login process

    Error: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient
    Data Provider)

    Step 1: Open SQL Server Configuration Manager
    Go to Windows 8 Start screen.
    Start typing in SQLServerManager11.msc if you are looking for SQL Server 2012 configuration manager. Type in SQLServerManager10.msc if you are looking for SQL Server 2008 configuration manager.
    In the result panel you can see the SQLServerConfiguration Manager.
    Click the icon to launch the SQL Server Configuration manager.
    The configuration manager will open in MMC.
    Step 2: Enable following configuration settings
    ensure Shared Memory protocol is enabled
    ensure Named Pipes protocol is enabled
    ensure TCP/IP is enabled, and s ahead of the Named Pipes in the settings
    http://dotnetguts.blogspot.com/2014/05/a-connection-was-successfully.html?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+DotnetGuts+%28Asp.net%2C+C%23%2C+.Net+Framework%2C+SQL+Server+Information%29
    Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/

  • When I try to submit a form I get an error massage (An error occurred during the submit process. There was a problem connecting to the server.) it seems I only get this message on a PC

    When I try to submit a form I get an error massage (An error occurred during the submit process. There was a problem connecting to the server.) it seems I only get this message on a PC

    Read the user manual that came w/the scanner and/or contact HP Support.
    http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    A scanner driver you may wish to consider:  VueScan Scanner Software

  • An error occurred during the submit process. Authorization is required for this network service

    Dear Guru,
         I have found error message when I submit form. The form show message "An error occured during the submit process. Authorization is required for this network service." If the form work correctly, it should trigger email with this form. Can somebody help me to find out the solutions?
    Thanks a lot.
    Wiriya C.

    I am also facing same error.
    Please let me know if you have resolved problem.

  • There's a error occured during the updating process

    when the updating process goes to the "calculating the required diskspace" step, there's a error occured saying "Could not access network location /startup" and then the updating process was suspended.
    this problem also occured during the unistallation process.
    P. S. there's only one solution about this problem, which is to delete the information of excrescent version of MS OFFICE, but this isn't working.
    So if anyone konws how to solve this problem please let me know. this borthers me for a long time.

    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

  • Can't initialize OCI error occured during the login process using TOAD 9.0

    I have installed the Toad 9.0 recently while login using the username & password for oracle 10.0 database , i am getting the error
    Can't initialize OCI Error 1
    But i am able to login using the Sql Plus successfully..
    Thanks in Advance.

    Here's one more reason why this error occurs in Toad. It is when you have more than one Oracle Client installed on your machine. Even when you select the correct Oracle Home in "Connect Using" field of Toad, you still get this error "Can't initialize OCI. Error -1". So, to solve that you need to go to the installation folder of that Oracle Home (e.g. C:\Oracle\ora92\), then go to the BIN folder. Open Oracle.Key in Notepad and confirm that it is showing Registry entry/path to the correct Oracle Home (e.g. HOME0 or HOME1 or whatever).
    I hope this helps.

  • Error occurred during the activation process

    I've just amended an ODS to include 2 new fields. The ODS gets fed data from a flat file.
    The load worked OK and got a green status code but when I tried to activate the data, I got the error, but I can't find any error messages to assist with this problem.
    Does anyone have any ideas how to activate the data successfully and/or what the problem may be?

    Hi Siva,
    The only information in the Details tab is a warning message:
    ODS activation (change log): Missing messages or warnings
         No Log Exists
    All the data received from the flat file looks OK as well.
    Any other ideas?
    Regards,
    Mark.

  • Application error occurs during processing the request.

    Hi,
    When I am giving transaction code SXMB_IFR, the browser is displaying this error,
    Application error occurs during processing the request.
    Details: com.sap.aii.util.prop.api.PropertiesException: Unable to read configuration data (ExchangeProfile/aii.properties)
         at com.sap.aii.util.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:202)
         at com.sap.aii.util.misc.api.AIIProperties.initServerMode(AIIProperties.java:323)
         at com.sap.aii.ib.core.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:22)
         at com.sap.aii.ibrep.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:128)
         at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:117)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:360)
         at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:180)
         at jsp_index1123003612843._jspService(jsp_index1123003612843.java:10)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:466)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:180)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:363)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:222)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:301)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:682)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:220)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:94)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:142)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
         at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
    Can any body suggest me how to solve this error??
    Also tell me where the log file is located to see the detailed error message??
    Regards,
    Ravindra.

    Have you checked your <b>connection</b> on exchange profile page.
    http://<hostname>:5<systemnumber>00/exchangeProfile/connection.jsp
    Make sure to enter the right parameters on that link.
    Check for the parameters:
    com.sap.aii.ib.server.connect.webas.r3.ashost
    com.sap.aii.ib.server.connect.webas.r3.client
    com.sap.aii.ib.server.connect.webas.r3.sysnr
    If these are good, then go ahead and refresh your local cache.
    https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
    SKM

  • Application error occurred during request processing TRIAL EmployeeAddressD

    I ve the NW Java Trial which is chipped with a demo scenario.
    When I try to test this service:
    Service: EmployeeAddressData
    Test: getAddressByPersonalID_R (String personalid)
    I'm runing into:
    Result:
    Application error occurred during request processing.
      Details:   com.sap.engine.services.webservices.wsnavigator.WSNavigatorException: null
    Exception id: [000C2980205100660000001900000F1D00044B2662750D88]
    In the netweaver portal itself the user gets the following information when trying to access its data:
    com.sap.tc.webdynpro.model.webservice.api.WDWSModelExecuteException: Exception on execution of web service with WSDL URL 'http://ivml2005:50000/EmployeeAddressData/Config1?wsdl' with operation 'getAddressByPersonalID_R' in interface 'EmployeeAddressDataVi_Document' User not found in HR: Exception on execution of web service with WSDL URL 'http://ivml2005:50000/EmployeeAddressData/Config1?wsdl' with operation 'getAddressByPersonalID_R' in interface 'EmployeeAddressDataVi_Document'
    Any ideas on how to solve this or how to get an error msg, which has more information?
    Edited by: Deniz Kesmen on Apr 18, 2008 5:52 PM

    Hi Deniz Kesmen
    Did you got the solution of the above problem?
    I am also getting the same type of issue while executing the webservice for a BRM rule from a webdynpro java application.
    I am using adaptive web service model for executing the webservice. Error is given below:
    com.sap.tc.webdynpro.model.webservice.api.WDWSModelExecuteException: Exception on execution of web service with WSDL URL 'http://LT-ENTITPCONSAJ.s1.ms.unilever.com:50000/testrule/testrulePort?wsdl&mode=ws_policy' with operation 'invokeRules' in interface 'testrulePortType'
    I am using CE 7.2 system.
    If I execute the web service from wsnavigator it works fine.
    Appreciate for you help.
    Regards
    Sajith

Maybe you are looking for

  • Is it normal? Some strange Samsung RAM in my new MacBook....

    I have just purchased a new MacBook. I wanted change RAM. I saw some strange powder on the contacts. And the mark of RAMs was SAMSUNG, not Kingston. Is it normal? And the powder, what is it? The photos of RAMs: http://img155.imageshack.us/my.php?imag

  • Macbook air, No Iphoto

    A couple of days ago I purchased an open macbook air item.  The only issue I am having is that who ever previously owned the computer must have deleted iphoto on the macbook air because it is no where to be found. Is this something Best Buy can fix o

  • Calling a function with eval causing CS5 to crash

    I'm calling a function depending on user input from a dialog and the resulting call is something like: eval(fromFormat + "To" + toFormat + "(selection, data)"); where selection is the app.selection. The correct function is called, and I can trace thr

  • Why sort on a column not working?

    Run a query and then right click on a char. column (already displayed as key), then Sort -> either "Ascending According to Key" or "Descending According to Key", but the sort not working.   We've tried both BEX query and Web, none works for the sort.

  • Does not automatically download updates

    When open up Itunes and get notice that a update is available. I click to download but nothing happens