Application error reads: the instruction at "0x7a0277a9" referenced memory at "0x7a0277a9" the memory could not be "read"

The following error message appears when launching Firefox: Application error: the instruction at "0x7a0277a9" referenced memory at "0x7a0277a9" the memory could not be "read"

Hi Ayaz_Shaikh,
What’s your host OS?
Do you install Windows 10 Technical Preview in Hyper-V? Or some else virtualization products?
Alex Zhao
TechNet Community Support

Similar Messages

"the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..

Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

Ipod(nano on XP laptop) connot by updated.Disk could not be read/written to

hello all
I have an ipod(nano 4Gbs with iTunes on XP laptop) and cannot get it updated. I have gone through the 5R's.
I ran all updaters and got message - "iPod manager internal error" and "cannot mount iPod"
Got this message on iTunes also "Disk could not be read/written to"
...any help would be much appreciated.

with the internal manager error, see:
iPod Updater for Windows: "Internal manager error" occurs when restoring or updating iPod
with the itunes error message, see:
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
and since you're on a laptop, we'd better check on these possibilities as well:
iPod not recognized correctly on Toshiba laptop
iPod not recognized when connected to Windows laptop over USB

"disk could not be read from or written to" when uploading pictures on ipod

So... when I try to upload the pictures onto my ipod it gives me this "disk could not be read from or written to." I don't understand why because all the music got transfered perfectly. Can anyone please help?

See this...
Disk Cannot Be Read or Written to error when syncing iPod
btabz

Nimax.exe - Application Error. Instruction at 0x6d8e3e61 referenced memory at 0x00000000. The memory could not be "read."

On startup I get a nimax.exe application error.
The instruction at "0x1ce30df7" referenced memory at "0x00000000". The memory could not be "read".
This happens every time I start the computer, run a vi with the initialize.vi or try to use the measurement and automation explorer.
I am running windows XP, Labview 7.1, and max 3.1.1

I had a similar problem in win2000 / max 3.1.1. I do not recall the exact memory location error.
It happened every time I started the computer, or once started, evrytime I load a vi that has some daqmx functionlity.
I reinstalled windows / Nidaq, and never had the error again.

Java.exe - Application error. The instruction at "0x504c42b8" referenced memory at "0x00000009".The memory cannot be "read".

Our production application is experiencing the following error with increasing
frequency.
Windows 2000 Dialog Box:
java.exe - Application error.
The instruction at "0x504c42b8" referenced memory at "0x00000009".The memory cannot
be "read".
Click on OK to terminate program.
Does anybody know the cause and solution to this problem?
We're using WL 5.1.0 sp11 jvm version 1.2.2_007
However, searching the web indicates the error message occurs with a variety of
configurations.
[javaError.gif]

John Slaman wrote:
>
Our production application is experiencing the following error with
increasing frequency.
Windows 2000 Dialog Box:
java.exe - Application error.
The instruction at "0x504c42b8" referenced memory at "0x00000009".The
memory cannot be "read".
Click on OK to terminate program.
Does anybody know the cause and solution to this problem?
We're using WL 5.1.0 sp11 jvm version 1.2.2_007
However, searching the web indicates the error message occurs with a
variety of configurations.I believe this is a memory flaws problem, cannot read memory can be in 2
ways: either the address has been allocated (reserved) by some other
resources or the address specified is not valid (phantom lookup).
Try to get a higher version of WLS.
Thanks,
Neo Gigs
"Follow the white rabbit..."

Explorer exe. Application error" it says "The instruction at 0xf6628a87 referenced memory at 0x00000000 The Memory could not be read Click on OK to terminate the program

the other day i did the windows 2008 R2 Rebooting
Explorer exe. Application error" it says "The instruction at 0xf6628a87 referenced memory at 0x00000000 The Memory could not be read Click on OK to terminate the program
i just get this error message. If it is anything serious, there is nothing I can do.
the 2008R2 OS was hang out of control
what is a major cause of error message? is there any fix or Hotfix?

Hi,
Regarding the current issue, it may be caused by some third party software conflicting with explorer.exe or it could be a memory conflict with a driver.
Signs of low memory include poor performance, low-memory or out-of-memory notifications, and display problems. I would suggest you to follow the steps provided in these methods and check if
it helps in resolving the issue:
Method 1: Run System Maintenance troubleshooter:
Step 1 : Move your mouse to the right bottom and click on search.
Step 2 : Type Troubleshooting in the search box and click on it
Step 3 : On left pane click “View all” click on the "Run Maintenance task" under the System and Security.
Step 4 : Click on the "Next" in the System Maintenance interface.
Select "Try troubleshooting as an administrator
Method 2:
I would suggest you to run the Memory Diagnostic Tool and check if it helps.
a) Press
Windows key and type "memory".
b) Click "Settings" and then click the result "Diagnose your computer's memory problems".
c) Select the recommended option to run the tool.
Check if the issue still persists. If the issue persists, increase the virtual memory.
Change the size of virtual memory
http://windows.microsoft.com/en-in/windows-8/change-the-size-of-virtual-memory
Method 3: I would suggest you to run System File Checker tool (SFC.exe) and check if it helps. The System
File Checker tool (SFC.exe) scans for missing or corrupted system files and repairs them.
Run System File checker to see if you have any corrupted system files.
Use the System File Checker tool to repair missing or corrupted system files
http://support.microsoft.com/kb/929833/en-us
Method 4: If issue persists follow these steps:
I would also suggest you to check if the same issue occur in Safe Mode and check if the issue occurs there as well.
Step 1:
Start your computer in safe mode
http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including-safe-mode
Step 2:
Follow the Microsoft KB article to perform clean boot on the computer. A clean boot helps eliminate software conflicts.
How to perform a clean boot in Windows 8.1, Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
Disclaimer: After you have finished troubleshooting, follow these steps from section “How to
reset the computer to start as usual after clean boot troubleshooting” to reset the computer to start as usual.
Hope this helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Using LabVIEW 6.0.1 in Win2K, I get the Application Error: The instruction at "0x004be060" referenced memory at "0x00000001". The memory could not be "read".

I have several VIs that use the same typedef. This "super" typedef consists of of a cluster containing 6 arrays. Each array has elements that are themselves typedefs. The array element typedefs consist of a cluster of strings, a string array, and yet another cluster typedef of instrument handles. The total number of unique typedefs is 13 (1 super, 1 as the array element in the 6 arrays, and 1 in each array element).
When I make any changes to any of these typedefs and I try to open a VI that uses the "super" typedef, LabVIEW stops loading subVIs and crashes with the Application Error: Application Error: The inst
ruction at "0x004be060" referenced memory at "0x00000001". The memory could not be "read". Also note that this VI contains several subVIs that use this "super" typedef for terminal inputs and outputs.
What is causing this problem? My only solution to this is to rename the "super" typedef, open the VI, ignoring the load of the "super" typedef, and once the VI opens (with a broken arrow) relinking the VI to the typdef after renaming the typedef back to the original name. This becomes quite painful when you have to do this for each and every VI that uses this typedef on every revision of the typedef.

You might want to first install the 6.0.2 patch before digging too far into this. You can download it from the ftp site:
ftp://ftp.ni.com/support/labview/windows/updates/6.0.2/
If the problem remains, then it is likely related to a few known issues with strict type defs. Unfortunately, there is not much that can be done about it at the present time. You might try having the *.ctl file open in the editor when you open the VIs to see if that helps.

How do I fix Application error "The instruction at 0x77a42245 referenced memory at 0x77f174e8. The memory could not be read"

I updated my Firefox to 19.1 and since then Firefox will not respond and gives the following error message ""The instruction at 0x77a42245 referenced memory at 0x77f174e8. The memory could not be read. Clic on OK to terminate the program. When you click OK then Firefox crashes. How do I fix this please?

See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter

When I close firefox I get an error message that says:The instruction at 0x7758144 referenced memory @ 0xffffffff, The memory could not be read, how to fix ths?

I get an error message that says , nsAppShell:EventWindow:firefox.exe... Application E...
The instruction at 0x7758e1144 referenced memory at 0xffffffff. the memory could not be read. Click on OK to terminate the program. What's wrong and how do I fix it?

I knew how to do that, sorry. I didn't know if you wanted a copy of each individual report or just the page. Here it is...
Submitted Crash Reports
Report ID Date Submitted
bp-af8afb9c-406f-4843-b5f0-f341c2140704 7/2/2014 7:12 PM
bp-500df430-465f-44ec-9a7e-c34372140702 7/2/2014 4:52 PM
bp-2c14d0a2-b4a2-4eee-a72d-85b912140702 7/2/2014 4:51 PM
bp-2e8bc220-7e16-4291-b3c3-59a7b2140702 7/2/2014 4:50 PM
bp-ea8a52d4-ff08-48f4-b641-539202140702 7/2/2014 4:49 PM
bp-7ff8483e-468a-4324-b788-336e02140702 7/2/2014 4:46 PM
bp-ee0edfa1-f678-428c-868d-1f80b2140702 7/2/2014 4:44 PM
bp-dd32ccd5-4a84-4582-baa9-d731a2140701 7/1/2014 5:29 PM
75d1f4f1-730e-4e6d-a9aa-7bf08527c14e 5/14/2014 7:40 PM
a5d77b9b-5adc-40ed-8926-245f9c1711b2 4/23/2014 6:24 PM
42ef8c1d-dd05-401f-b91c-15633c5080f5 2/17/2014 2:33 PM
0a233130-e0e9-4a78-ac7c-70ce42d07fcd 2/17/2014 2:33 PM
90b4e67a-5655-4dbf-96aa-b1ceb622cffb 2/17/2014 2:33 PM
1222611d-88cd-4c2b-a165-48dc2ae60888 2/17/2014 2:33 PM
921660a9-b14c-4b71-81c0-4864f246f531 2/17/2014 2:32 PM
84c51953-118a-4b16-a65c-5b0472c31885 2/17/2014 2:32 PM
b12c8c12-b5d2-4028-8804-7831fff1e059 2/17/2014 2:32 PM
fa608271-c2c6-4ff2-8fee-dd12d9cddca5 2/17/2014 2:32 PM
110a075b-5209-4b48-98fb-51f6c18747b7 2/17/2014 2:32 PM
f6b7c7f8-edb5-4c8a-9f9d-95cdf9dae28f 2/17/2014 2:32 PM
38df997b-6c08-4b04-9e10-79114e21b087 2/17/2014 2:32 PM
58e8b80b-0482-4df7-874e-e3c051e3a390 2/17/2014 2:32 PM
2649763b-3e51-414c-87a9-c429e2542a1c 2/17/2014 2:32 PM
f3323912-ee94-40ac-9378-891cf8d04454 2/17/2014 2:32 PM
db9a70c3-8de0-4b52-b7f2-999da7fa4584 2/17/2014 2:32 PM
ac6c20aa-fd8b-4068-8fee-777fddba34a9 2/17/2014 2:32 PM
86068336-7d23-42de-ae1e-30c58f38ed20 2/17/2014 2:32 PM
da68f0b9-1b9f-4fc6-b16d-1f7b3e57a111 2/17/2014 2:32 PM
a5a07386-14fb-44e3-aabe-2dcf350980f8 2/17/2014 2:32 PM
3f447cee-1105-416e-9b66-163fcb2f25fb 2/17/2014 2:32 PM
968c04e0-00bd-4489-8ac3-13e2100b0f70 2/17/2014 2:32 PM
84a12490-7aff-43a3-8b18-e596eef73ece 2/17/2014 2:32 PM
8f5bc390-2805-41df-8d60-48c2b6b61816 2/17/2014 2:32 PM
088af5c3-ec72-47a6-be3e-5635daf4bd7c 2/17/2014 2:32 PM
30f469f8-4802-4708-ad13-01b0f69a5087 2/17/2014 2:32 PM
33080078-0b63-4db7-8f06-0ae2547e8118 2/17/2014 2:32 PM
f03a4616-d0bb-41a6-b322-b5edfbaaede8 2/17/2014 2:32 PM
577bb1ab-2f33-4707-b3f5-a89fab3ecdfb 2/17/2014 2:32 PM
e05818d0-59b2-4e32-aa85-88a76401a12c 2/17/2014 2:32 PM
0d6c09fa-bc59-438a-b306-7775f4339846 2/17/2014 2:32 PM
95d256b1-f1d2-4443-99f1-2373246e2c40 2/17/2014 2:32 PM
fa943610-9b45-4e01-ba2e-137fff6b0278 2/17/2014 2:32 PM
1d918c94-c13e-4e1b-89f6-6931e0aa99a8 2/17/2014 2:32 PM
b7a0218c-de80-4a2f-9aea-8df9bda565fe 2/17/2014 2:32 PM
9b9d142f-e411-4529-840d-b0ad9bae57e6 2/17/2014 2:32 PM
cbdc8180-d488-4a74-954a-2b209954cee9 2/17/2014 2:32 PM
b0d7cb88-4f57-4650-8863-d085d7eaa255 2/17/2014 2:32 PM
fc56f033-1b12-4588-8ffb-8742245d8e0b 2/17/2014 2:32 PM
603c27c7-d40e-45bb-8a23-85cd5e3ad974 2/17/2014 2:32 PM
03778c8d-1e07-4532-a692-cc13200c9bd8 2/17/2014 2:32 PM
e8a1bcbd-9109-48a3-9d4b-7ad2c66ba12f 2/17/2014 2:32 PM
5c063da2-6949-44cf-9f8a-12d45e41b053 2/17/2014 2:32 PM
6758ff53-9c38-472f-83b0-466c7d38080a 2/17/2014 2:32 PM
a252f676-f745-415b-b640-5eb8df5cbc6d 2/17/2014 2:32 PM
a0ffc786-3e64-4d41-8518-1545ec39ca90 2/17/2014 2:32 PM
922ea6d5-6204-4a10-8208-68dddef1afcb 2/17/2014 2:32 PM
8bf8a1b9-33ce-48df-9f73-36d09da7d3b2 2/17/2014 2:00 PM

The instruction at 0x100072b8 referenced memory at same could not be read-error message always appears at startup and cannot be eliminated.

firefox.exe - Application Error
The instruction at 0x100072b8 referenced memory at 0x100072b8. The memory could not be read.
Click on OK to terminate the program
Click on CANCEL to debug the program
Either of the above options terminates Mozilla - neither option fixes the problem - however Mozilla works as long as the error message remains on the desktop.

We cannot know. You are not offering any system information nor actually telling what program you use and what you do when the crash occurs.
Mylenium

When I open Firefox I get this error-firefox.exe application error the instruction at 0x02c38690 referenced memory at 0x02c38690 the memory could not be written

When I open Firefox I get the following error: firefox.exe application error - The instruction at 0x02c38690 referenced memory at 0x02c38690 - The memory could not be written - Click on OK to terminate the program.
If you click on OK it closes Firefox - You can not reopen Firefox until you reboot the computer. Then it starts all over again.
The same happens if I click the "X" instead on the error window.

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

HELP: "nsAppShell:EventWindow: firefox.exe - Application Error The instruction at 0x0770e1b0 referenced memory at 0x0770e1b0. The memory could not be written."

Whenever I close Firefox, I get this error message: "nsAppShell:EventWindow: firefox.exe - Application Error The instruction at 0x0770e1b0 referenced memory at 0x0770e1b0. The memory could not be written."
Help - How to get rid of this message/error?

In order to be able to find the correct solution to your problem, we require some more non-personal information from you. Please do the following:
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
Thanks in advance for your help!

Itunes: itunes.exe - Application Error. The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be "written"

Itunes: iTunes.exe - Application Error
The instruction at "0x00000000" referenced memory at "0x00000000".
The memory could not be "written"
Anyone have solution. Already tried uninstall and reinstall

Did you sort this issue out?
I have the same problem.

FlashPlayerPlugin - Application error message - "The instruction at 0x71a30000 referenced memory at 0x71a30000. The memory could not be written"

Since upgrading to Windows 8 Pro (with a downloaded upgrade, not a "clean" instal, so all my apps and settings were retained) I get the following error message when starting my customised version of Firefox with several pinned tabs, or when flash content loads in an uncustomised version in another user account, or when that version is closed if no flash content is loaded :-
(Title) - FlashPlayerPlugin_11_5_502_110.exe - Application Error
(Content) - "The instruction at 0x71a30000 referenced memory at 0x71a30000. The memory could not be written. Click on OK to terminate the program"
This also happened with the 11.4.402 version prior to today's update.
I have tried running the browser with add-ons disabled, and uninstalled/re-installed Firefox, but the problem remained. Can anyone tell me what the problem is and how to fix it?

For me, the problem was with Trusteer. An update of Trusteer is available which solves this issue. All okay now.

Application error reads: the instruction at "0x7a0277a9" referenced memory at "0x7a0277a9" the memory could not be "read"

Similar Messages

Maybe you are looking for