Application Explorer icon location issue

I'm in the process of building new images (XP Pro SP3) that include
ZENworks Agent v7.0.1.4 (to address some policy application issues we're
experiencing).
After imaging a machine, the Application Explorer icon is being
positioned on the right-hand side of the desktop. This differs from
7.0.1.0, for which the Application Explorer icon adheres to the "align
to grid" setting and happily lines up with all other desktop icons on
the left-hand side of the desktop. This is an issue as our background
bitmap contains a logo/image and other info in the 400 pixels on the
right... the Application Explorer icon gets lost if it's on that side.
Note that there are no app object icons on the desktop and there are
only 15 icons in total for the particular user I'm logged in as (incl.
the Application Explorer, Recycle Bin, IE and WMP) - 11 icons reside in
the users redirected desktop folder. I've done a side-by-side image
build with Agent v7.0.1.0 and v7.0.1.4 - no other changes. This only
happens with with the newer agent. The agent was installed fresh in both
cases - not updated.
Thoughts? This is holding up image development at this point.
What I have observed is:
-login as my non-volatile test user, app explorer is on the right (I can
do this repeatedly and it stays on the right)
-logout and temporarily move the users icons from the users redirected
Desktop
-login and App Explorer tucks itself nicely under the IE icon on the
left... *but* I first see the icon appear on the right before it's
magically repositioned on the left!
-logout and put the icons back in the users redirected Desktop
-login and App Explorer remains on the left!
I'm imaging two machines right now so I can do some more side-by-side
testing... hopefully identify something...

jd,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

I can't seem to find where I need to access Find My Phone on my PC. I believe that everything is installed but have not found the icon or application used to locate the device. Can someone help me?

I can't seem to find where I need to access Find My Phone on my PC. I believe that I have installed the program properly but cannot find the application or ICON on my PC in order to locate the phone device????

You need to login to iCloud: https://www.icloud.com then click Find My and follow the on-screen directions.

Application Explorer won't start unless logged into workstat

Since upgrading all our XP workstations to Zenworks Desktop Management Agent to 7.0.173.90519 (Zenworks7 Sp1R4) some computer's Application Explorer is failing to start properly.
The Application Explorer system tray icon is defective, it does not respond to anything and no application folders are loaded. However it does work ok if you use Workstation Only first then log into Edirectory afterwards
I have tried reinstalling the Desktop Management client, Novell Client, re-registering the workstation and clearing the NAL Cache. The only thing that fixes it is reloading Windows

If you are able to open an SR, I would recommend doing so.
What happens if you set "Application Explorer" so that is does NOT load
automatically.
Login Normally.
Then load "Application Explorer" manually.
If that helps, how are you loading "Application Explorer".
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"Patrick Farrell" <[email protected]> wrote in message
news:YvXFm.357$[email protected]..
> neil france wrote:
>> Since upgrading all our XP workstations to Zenworks Desktop Management
>> Agent to 7.0.173.90519 (Zenworks7 Sp1R4) some computer's Application
>> Explorer is failing to start properly.
>>
>> The Application Explorer system tray icon is defective, it does not
>> respond to anything and no application folders are loaded. However it
>> does work ok if you use Workstation Only first then log into Edirectory
>> afterwards
>>
>> I have tried reinstalling the Desktop Management client, Novell Client,
>> re-registering the workstation and clearing the NAL Cache. The only
>> thing that fixes it is reloading Windows
>>
>>
> Sounds like you're having the same issue that I am having. See the
> thread "ZFD agent hangs after splash screen". Please post there so that
> Jared can get info from you as well to determine if it's the same issue.
>
>

Application explorer hangs

NW 6.5 SP3
Netware client 4.91 SP2 (also patched with C update to try and fix problem)
Zen for destops 4 ir6 (also update the zenagent to see if this fixed the
problem)
I' ll post this here first but may post this in the Client forum also.
I have a problem when users login when confronted with the challenge
response question.
When users login, my password policy forces them to set a challenge response
question and answer at login if not already set, (which is what i want.)
Users are presented with a yes/no question, ' Do you wish to set your
challenge response question?'
IF users click yes and then set their challenge response question.all is
well.
But...... if they click no, the workstation loads , but then hangs with NAL
application explorer ( the spinning icon on the system tray) we have an
application that loads at start up with NAL (NWQuota).
I have tested this quite a few times and it does seem that when the
response is NO it affects the startup of this application.
If i click no, then i set the application to not run at startup, wait for
workstaion to fully load. then click on a NAL icon for it it does the same,
it hangs with a (distributing script error)
What i find odd is that if users click YES, there is no problem, when they
click NO it affects the workstation, as if its hanging on to something.
many thanks in adavance.
Nigel

N,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Adobe Reader X save location issue

Hi All, i would like to seek expert helps on Adobe Reader save location issues. After we upgrade from Adobe Reader 9 to Adobe Reader X.
There are changes on how save location works in Adobe Reader X
If save PDF via Internet Explorer – the save location will according to last save location, HOWEVER
If save PDF via Adobe Reader X – the save location will set according to location the file is being open
Let me show you what i mean over the pictures
I open a reader_X_help.pdf using Adobe Reader X and then save the file using Ctrl+Shift+S at: C:\Users\xxxx\Documents\My last location save
refer my last save location.jpg
Now i want to save another new file back to C:\Users\xxxx\Documents\My last location save, I open the file Adobe file2.pdf located at desktop and when i do Ctrl+Shift+S, the location point to my desktop and not C:\Users\xxxx\Documents\My last location save
refer my last save location change to desktop.jpg
I have tested this features in Adobe Reader 9 and it's different whereby it's will point according to my last location save.
There is no issue with computer as i have 3 machine running different enviroment, Windows XP SP3, Windows 7 Enterprise, and all using same version of Adobe Reader X version 10.0.1.
So my questions & concern:
Is there any way to change the save location features same as Adobe Reader 9?
If YES, how to do it? By Computer Changes or Adobe Reader X packages modification using Adobe Customization tools?
If NO, Where can i find this source of documentation stated about this new changes so i can publish this information in HP website as new design changes to avoid complaint or negative feedback.
Looking forward for expert reply as soon.
Thank you very much and Have a great day.
Best Regards
Edmund Lau
[email address removed by host]

Solved it!
1-go to "edit", select Preferences.
2-select from the left pane: Security (enhanced)
3-click on "add folder path" button just below the big white box
4-pick a folder of your choice and click "ok". (your selected folder path will appear in that white box above the "add folder path" button in step 3)
5-if you want to add additional folders, just repeat steps 3 & 4
6-once you are done, click "ok" on the preferences screen and click "ok" again to accept the changes.
Yes, it seems illogical, but it worked.
I tested by closing the Reader (X), then surfed the web and did what Neher5 was explaining he/she wanted to do just after opening a pdf from a website and lo-and-behold, it worked!. No more "save to temp folder" issues.
Hope this helps.

Having window location issues when waking from sleep

Since upgrading to Mavericks, sometimes when my Mini wakes from sleep the application windows are located off screen. At first I would quit and reopen most of the applications affected (especially FileMaker), but I find I can bring the windows back within view by going to Displays in System Preferences, changing the rotation, then cancelling after the redraw. My monitor is a BenQ GW2450H, but it doesn't seem like this is a monitor issue (no problems in System 10.7).

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Where is default icons location in oracle form 10g

hi,
Can anybody please tell me, where is the default(given below) icons location in oracle form 10g. I want to user that icons in my form.
Image: !c:\icons.gif!
thanks
mohan

Hi,
Is your problem solved?
This issue occurs because gif images by default are not still images. These are graphical interchange images, i.e. images depicting some kind of action/motion.
If I am not wrong then just to test this out if you open the gif image you are looking at, in pbrush then image will appear in a corner. Now if you modify that image such that you copy only the icon in the corner and then save the copied icon in a new file in gif format then you will be able to see that image in the centre of button, rather over complete button.
Hope this helps!
Av.

Callmanager Conferencing with remote locations Issue

I am new to using callmanager, and I need a little help.
I have created a meet me number on my callmanager. Once a session is begun, all local network users are able to join the conference call with no problems..
If a remote location hosts a meet me call, all my local network users are able to join THAT session with no problems as well.
But if I host a meet me session on MY local network, remote locations CANNOT reach my session. The line remains silent when they dial in.
I've been told to check the codecs which seem fine and we are checking for a firewall issue, but all normal calls local and remote work just fine. It's only the conference bridging that causes issues.
Please help.
Thanks

Hello,
Thank you very much for replying.
The configurations, I've been told, are correct. G711 for intrasite and G729 for intersite. And region and device pools correct as well.
I presented the HW conf bridge solution to a coworker who said it makes sense, but at this time, I don't have access to a hardware conference bridge. Is this the only solution?
From: prbt
To: Nichole Ketchum
Sent: Wednesday, August 3, 2011 1:54 PM
Subject: - Re: Callmanager Conferencing with remote locations Issue
Cisco Support Community
Re: Callmanager Conferencing with remote locations Issue created by Priya B.T in Unified Communications Applications - View the full discussion
hi,
please check the following on the call manager,
- Check the region configuration on each device pool.
- Then check the region configuration between the two regions.
- One of the best practices followed by Cisco is, the intrasite region settings should be g711.
- And the region settings between inter site should be g729.
- G729 is not supported by software conference bridge, it is only supported by hardware conference bridge.
- So add the hardware conference bridge to the MRGL of the phone.
- And the hardware conference bridge has to be first in the list, that is before the software conference bridge.
please let me know if this helps or we can do further trouble shooting on this issue.
Reply to this message by going to Cisco Support Community
Start a new discussion in Unified Communications Applications at Cisco Support Community

Application Explorer - Not Loading To System Tray On Login

Hi,
We are getting users logging into their computers in the morning, and finding that the Novell Application Explorer is not loading into the Windows system tray.
Manually running the program does not work, only a reboot seems to cure the issue. Any thoughts?
7.0.173.90519 - ZENworks Desktop Management 7 SP1 Interim Release 4

No idea why, but you may want to try ...
Killing Explorer.exe and then Trying to Run the NAL Explorer.
NAL Explorer hooks into Explorer.exe in a fashion that a hook remains
even after killing NAL Explorer.
This hook may be having an issue so NAL Explorer can't start or restart
properly until Explorer.exe is restarted.
Again, not a fix, but may be quicker than a reboot if it helps.
On 11/4/2010 2:36 PM, rhowelld wrote:
>
> Hi,
>
> We are getting users logging into their computers in the morning, and
> finding that the Novell Application Explorer is not loading into the
> Windows system tray.
>
> Manually running the program does not work, only a reboot seems to cure
> the issue. Any thoughts?
>
>
>
> 7.0.173.90519 - ZENworks Desktop Management 7 SP1 Interim Release 4
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

JPanel Scrollable mimic Windows Explorer Icon View

I am developing an image viewer application, and I want my thumbnail image JPanel to mimic MS Windows Explorer's layout in icon view. However, I have not been able to accomplish this. I have searched high and low, finding many others with my same problem, but no solution. To see exactly what I want to mimic, go to Windows Explorer and take a look at Icon View.
Windows Explorer seems to be using a type of FlowLayout, and the icons get wrapped to the next line. If the number of icons exceeds the viewable space, the vertical scrollbar appears. Note that there is no horizontal scrolling; only vertical scrolling with the FlowLayout. If the user adjusts the SplitPane, then the layout adjusts the scrolling and icons accordingly.
============================================================
QUESTION: How can I get my JPanel to mimic Windows Explorer Icon View?
============================================================
10 Dukes to anyone who can get this to mimic Windows Explorer. Ideally the solution would not be too involved.
P.S. I think it stinks that JPanel, by design, does not implement Scrollable Interface. Even then, it doesn't work the way I want it to with my FlowLayout and only vertical scrolling. Does anyone understand why it doesn't implement Scrollable, like JTextArea, JEditorPane, etc. do?
Thanks
Wayne

Thanks camickr! I didn't try your layout manager since I managed to find another one which seems to do the trick as well. Here is the link from which I found it:
http://groups.google.com/groups?selm=c43ovb%242db505%241%40ID-76750.news.uni-berlin.de&output=gplain
It seems that in the source there is a small bug which is easy to fix. I think the boolean parameters in minimumLayoutSize and preferredLayoutSize should be changed.
So in minimumLayoutSize():
return computeSize(target, true);and in preferredLayoutSize():
return computeSize(target, false);After that fix, it worked just fine for me.
Here is the complete source (author Babu Kalakrishnan):
import java.awt.*;
* A modified version of FlowLayout that allows containers using this
* Layout to behave in a reasonable manner when placed inside a
* JScrollPane
* @author Babu Kalakrishnan
public class ModifiedFlowLayout extends FlowLayout
     public ModifiedFlowLayout()
         super();
     public ModifiedFlowLayout(int align)
         super(align);
     public ModifiedFlowLayout(int align, int hgap, int vgap)
         super(align, hgap, vgap);
     public Dimension minimumLayoutSize(Container target)
         return computeSize(target, false);
     public Dimension preferredLayoutSize(Container target)
         return computeSize(target, true);
     private Dimension computeSize(Container target, boolean minimum)
         synchronized (target.getTreeLock())
             int hgap = getHgap();
             int vgap = getVgap();
             int w = target.getWidth();
         // Let this behave like a regular FlowLayout (single row)
         // if the container hasn't been assigned any size yet
             if (w == 0)
                 w = Integer.MAX_VALUE;
             Insets insets = target.getInsets();
             if (insets == null)
                 insets = new Insets(0, 0, 0, 0);
             int reqdWidth = 0;
             int maxwidth = w - (insets.left + insets.right + hgap * 2);
             int n = target.getComponentCount();
             int x = 0;
             int y = insets.top;
             int rowHeight = 0;
             for (int i = 0; i < n; i++)
                 Component c = target.getComponent(i);
                 if (c.isVisible())
                     Dimension d =
                         minimum ? c.getMinimumSize() :
                      c.getPreferredSize();
                     if ((x == 0) || ((x + d.width) <= maxwidth))
                         if (x > 0)
                             x += hgap;
                         x += d.width;
                         rowHeight = Math.max(rowHeight, d.height);
                     } else
                         x = d.width;
                         y += vgap + rowHeight;
                         rowHeight = d.height;
                     reqdWidth = Math.max(reqdWidth, x);
             y += rowHeight;
             return new Dimension(reqdWidth+insets.left+insets.right, y);
}

Zenworks Application Explorer Ver 7.0.1.4 randomly offline

Hello,
We are running Zenworks Application Explorer Ver 7.0.1.4 on all our Windows XP SP2 workstations. It randomly goes offline, so when we rollout a new application, users often call saying they never got it. We we remote control their desktop, Application Explorer will be offline.
There is nothing in Event Viewer related to it, and the users are not turning it off? I found some older forums referencing this as an issue in past versions of the Application Explorer ver 4 and 6, but I would think this has been taken care of by now.
Thanks,

gilechri,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Application Builder Icon Missing

Hi,
I am a newbie. I have brought up apex 4.1.1 on aws RDS Oracle 11g and have logged in as INTERNAL. My problem is I have been searching for Application Builder menu item or icon so i can start building applications but I can't find it.
I only see Home, Manage Instance, Manage Requests, Manage Workspace, and Monitor Activity.
kindly advice me on how to get the application builder icon, or do I need to install something else?
Many thanks

987830 wrote:
Hi,
I am a newbie.Welcome to the forum. Please read the FAQ and forum sticky threads (if you haven't done so already), and update your forum profile with a real handle instead of "987830".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I have brought up apex 4.1.1 on aws RDS Oracle 11g and have logged in as INTERNAL. My problem is I have been searching for Application Builder menu item or icon so i can start building applications but I can't find it.
I only see Home, Manage Instance, Manage Requests, Manage Workspace, and Monitor Activity.
kindly advice me on how to get the application builder icon, or do I need to install something else?You're recommended to complete the <i>2 Day + Application Express Developer's Guide </i> tutorial (if that's not what you're already doing).
Home, Manage Instance, Manage Requests, Manage Workspace, and Monitor Activity are the administration components in the internal workspace. See the "Setting Up Your Own Local Environment" section for how to create your own workspaces in which you will use the Application Builder.

Unable to expand Integration Object in Application Explorer

Hi
I am unable to expand Integration Object, Business Object from Application Explorer. Please see the attached snap. http://s24.postimg.org/69cstg9id/Application_Explorer.png
Please help me to resolve this issue.
Thanks
Nasir

Hi,
I Uninstalled JDK vesrions in my machine and Re installed only the latest version and i am able to open it now. I am able to open the admin console now.
Thanks!
Siva.

Internet Explorer icon changed after upgrade

Hello,
On this same laptop, i had recently done an upgrade of Internet Explorer from v6 to v7.
Now the icon from the Programs menu has changed - it has gone white-ish - a file that require Open With program (not sure of the description for this)
Do you know whether i could revert/fix this? IE icon should be a 'blue letter e' .....
Regards.

Hi
This is no issue or problem. The Internet Explorer icons will always change after and upgrade to a higher version.
This was a case after a upgrade from IE6 to IE 7 and from IE7 to IE8
PS: if you want to publish a screenshot then you will have to use an external website for a upload adn then you could post a link to this image.
Cheers

Cp and icon locations

While icon locations in my folders seem to be ok with normal Finder operations, I have found an issue. If I am in the Terminal using unix commands, copying a few files using a script (using the cp command), icon locations are lost in the folder where the files are being copied. Any ideas?

.. thats apparently a Veritas Filesystem (vxfs) error, i would ask veritas..
Even though you could ensure that you are using /usr/bin/mv and /usr/bin/cp ...
.7/M.

Application Explorer icon location issue

Similar Messages

Maybe you are looking for