Application failed to return a video frame
This is no problem to me anymore, but if someone have this error appearing ir rendering process, I can share my solutions. I had to spent some week before I finalize my current project in Premiere Pro CS3. I manage to test all solutions, what people provide in different forums about this error message. I cannot say, that something of this is nuts, maybe there are different problems under this one error message.
1) first they say, that there should not be any gaps between you videos or sequences in timeline – not a single black frame
2) your audio should not be longer than video on timeline. same – not longer than a single frame
3) when you render, you should close all sequences ir timeline palette (they will not be deleted, just closed)
4) and this ir most important – you have to boot your system in 32bit, not 64! I'm working on MacOSX Snow Leo x64, and did render my movie only after I boot in 32bit. It could be solution for Win users, too. I have no idea about CS4 and CS5, bet my CS3 is not 64bit application.
Good luck!
Welcome to the forum, and thank you for posting your observations, and experiences.
I did this ARTICLE for the most likely cause of "Failure to Return Frame" error.
You also make an important note of the Duration of the Audio vs the Video. As the Video takes center-stage, having even a few Audio Units extra, means there is a gap in the Video. To keep this from happening, and to also address some other potential issues, I always end each Timeline with about 02 sec. of Black Video, and always end the Audio within that.
What I find odd, however, is that I have seen Timelines with many gaps, and they Transcode fine, yet have seen Timelines with one 1-Frame gap, that would yield the "Failure to Return Frame." Why the gaps are not 100% universal in shutting down Transcoding, is still a mystery.
Appreciated, and good luck,
Hunt
Similar Messages
-
Please Help! PrE 4 "failed to return a video frame" on my project!
Big project, I finally pulled everything all together and on the render to H.264, I get "Adobe Premiere Elements (4) failed to return a video frame."
I really had hoped to get this in today (it's a video pitch for my dream opportunity). Any help you guys/gals can lend would be greatly appreciated!Bill, thank you! Your article did help, and I was able to get the video to completely render. I essentially used a "Title" track, stripped down of its text/shapes to fill in all the gaps. Seems to have done the trick on that issue.
Unfortunately, I must have done something wrong, because the audio and the video are now terribly out of sync. The odd thing is, it seems to be matched sometimes, but then the video of me talking appears to speed up or slow down - the audio does not sound distorted but the video appears to be changing speeds. It's kind of throwing off my "Oh maybe I added too long of a gap Title frame and skewed the audio" theory.
I was dreading this moment. The moment when all is done and I can't export cleanly! Perhaps I should pose the audio sync problem as a separate question, because this is a fairly detailed project (lots of images/video popping up) and I fear that I'm having some sort of conversion or codec issue now
Any ideas? Thanks a million Bill, and everybody else! -
"Failed to return a video frame: Cancelling the operation"
I get this error after a few minutes when I try to export an MPEG-2 from Premiere CS3. Hundreds of other people seem to have the same issue, confirms Google, but I have yet to find a solution! Anyone?
Cheers!Herbie747,
After working through the tips provided by John, look at your Timeline very closely for gaps. When there is a "Failed to return... " error, it is most often associated with gaps (even one frame gaps) in the video. I zoom in to the "frame level" and step through the entire Timeline. If you use the PageUp/PageDown keys, you should see a smooth flow from Clip to Clip. If you get "pause," a "skip" or a "hesitation," you have probably found your gap.
Good luck,
Hunt -
Adobe Premiere Elements failed to return a video frame. Cancelling the operation. (For 3.0)
This is the message that comes up everytime I try to export my 6 minute 10 seconds film. I have used 2 of the 'Video Effects' and the film is mainly made up of AVI files.Will someone please tell me why this is happening and how I can fix it. Thank you very much
This error often shows up when there is a gap in the Video Timeline.
What I would do is zoom in on the Timeline to about the maximum. Hit Home to get the CTI to the 00;00;00;00 point. Now, hit PageDn to step you through your Clips. With the zoom at the max, you should be at the frame-level, so even a 1-frame gap should be visible. However, sometimes even max zoom will not clearly show them. What you need to do is watch the CTI, as it progresses from Clip to Clip. If it seems to "hiccup," or "stutter," you have probably found your gap. In most cases, you can just Select (Lasso) all Clips following and drag them so that the gap is closed. In some cases, you might just want to change the Out Point of the preceeding Clip to close it, or extend the In Point for the following Clip to close. Don't forget to check the entire Timeline for more.
One little caveat. If you do find gap, and close it up with the Lasso and drag method, and also have a Soundtrack that extends the total length of your Video, check that there is NOT more Audio, than you now have Video. If you do, you have two choices: click-drag the Audio's Tail to line it up with your Video's Tail (only if you have just a touch of silence in your Soundtrack, or can slightly alter you Fade-out to work as you want. Or, you can go to the Project panel, and choose the New icon, then Black Video. Drag that to butt up to the Tail of your last Clip, and then click-drag its Tail so that you have maybe one frame more Video, than Audio.
I hope that you'll be able to find a gap, and that it will be the problem. As I said, this is usually the cause for that error message.
Good luck,
Hunt -
Adobe Premiere Saving Issue: Returning a Video Frame
I have Adobe Premiere Elements 4 and have edited a video on it. The video format is AVI, from a camera that didn't seem to have trouble before this. It is a Sony if that is any help. I'm really hoping it isn't CODEC problems.
Last night I finished my project and tried to save it on my desktop as a Windows Media movie, but an error popped up saying that "Adobe Premiere failed to return a video frame." I tried other saving styles to no avail.
Thus I began the process of googling and then trying to solve this saving error by changing my edits. I have removed all Video Effects, except for three black and white shots. I have gone through and checked that I have no gaps, about five times. I saw that my audio (in a wma format) wasn't perfectly aligned with my visuals and had gaps, so I added in audio till there was never a silent moment.
Is that audio format (wma) acceptable?
I am playing two soundtracks over each other, one is the vocals and one is the music. The music's format is MP3.
I have several still shots created with the program with titles over it. At one moment I tried to put a menu on the project, but it didn't work out. When I went to try and delete my attempt, I couldn't find the menu to remove it.
The piece is about five minutes long. I can't think of anything else to tell you.
I'm running out of things to change. I'm afraid my CODEC is wrong and I may have to start all over (is there a way to apply a fix to a CODEC error on a project?). Having spent all day on this, I'm at a point of desperation. If I can't get it to work, I'm about to start all over in Windows Movie Maker where at least I know I can save it and turn it in tomorrow.
ThanksFor the Audio Assets, the best that one can do is to use PCM/WAV, and use any number of audio-editing programs to convert that.
Still, your error is "Return a Video Frame." That indicates an error in the Video portion of the Timeline.
Besides gaps, do you have any overly large still images?
As for any gaps, did you use the method outlined in the linked article? They can be very hard to see, even when zoomed into the max view (Frame View).
I still did not see the CODEC of the used AVI files. Can you provide that please, as it might make a differenece?
Good luck,
Hunt -
Application failed to return status record to ALE layer after Idoc procesed
Hi,
I am loading a full load to Product category (hierarchies) through process chain.
One of the load failed with the following error. The Idoc has status 51 in BW.
Can some suggest me the process for correcting this.
Thanks
No status record was passed to ALE by the application
Message no. B1358
Diagnosis
The application failed to return a status record to the ALE layer after the IDoc was processed.
This is due to an error in the application function module which processed the inbound IDoc.
Procedure
If you wrote the application function module yourself, you need to change the program.
If the function module in question is a standard application function module, you should consult SAP.Hi
If this is standard code then you will have to write code to populate the status message in exit. But in case of custom code, the above mentioned solution is best (if coding logic is correct). I have given this solution to many queries and all worked.
Thanks
Anuraag -
Basically as the title states, I cannot publish a set of photos that originated as video frame captures, whether to my hard drive or using a service plugin for Flickr. I have tried multiple publish service plugins for Flickr and everything fails precisely the same way. This only happens when I add photos to the collection that are JPG's derived from video, and it only started doing this recently. I have other frame captures that I uploaded just fine, but it appears that nothing from the set I worked on the other day wants to upload. Other NEF-derived photos from the same set work just fine.
All I get is a Warning dialog stating that an error has occurred while the main dialog stops on "Preparing to export...", then it kicks me back with no action taken when I click OK. The status in the upper left says "Updating Published Collections". If I remove the new frame capture photo, it works fine, but as soon as I add one to the collection, it fails to publish.
I updated from 5.4 to 5.5, tried new publish plugins, completely removed and recreated my local profile, reimported my catalog, all to no avail. Everything worked fine two days ago, then when I went to upload my latest edits yesterday, I started receiving the error and have had no luck fixing it.
I used debugView to capture a log as the error occurred, so I can provide that for a developer or support contact if required.
EDIT: I just tried choosing some different photos in the set, and most appear to work, so it is just some particular images that it does not like. I will try to narrow it down.
Message was edited by: Andrew MortonI narrowed it down to one photo in particular that it does not like. It's not a deal-breaker, but I am still curious what is going on that is causing that one photo being in a set to break the publish process
-
How to use the frameaccess code to convert video frames to jpeg files
Hello everyone. I am working on a project on video processing, and i need to be able to do image processing on individual video frames. However, to do this, I need to convert the frames to an appropriate format, namely jpeg. It is actually the conversion from buffer frame to BufferedImage that is important, as i already have an approximate knowledge of filewriter for the saving of already rendered file.
The original frameaccess code can be found here: http://java.sun.com/products/java-media/jmf/2.1.1/solutions/FrameAccess.html
there are several other threads tied to this topic, some of which do not work for me, or simply do not suit my needs, so please do not link me to them unless you are sure its the real solution.
if any one could help me by showing me the way of doing it correctly, and maybe give a nice short explanation, i would be very grateful.
Thanks you.
P.s: i am only a beginner to intermediate student in java and programming in general so...Here is the code i am currently using.
package Test;
import java.io.*;
import java.util.*;
import java.awt.*;
import javax.media.*;
import javax.media.control.TrackControl;
import javax.media.Format;
import javax.media.format.*;
import javax.media.bean.playerbean.MediaPlayer;
import javax.media.util.*;
import java.awt.image.BufferedImage;
import java.awt.image.RenderedImage;
import java.awt.image.*;
import javax.imageio.ImageWriter;
import javax.imageio.ImageIO;
import javax.media.control.FrameGrabbingControl;
* Sample program to access individual video frames by using a
* "pass-thru" codec. The codec is inserted into the data flow
* path. As data pass through this codec, a callback is invoked
* for each frame of video data.
public class FrameAccess extends Frame implements ControllerListener {
Processor p;
Object waitSync = new Object();
boolean stateTransitionOK = true;
* Given a media locator, create a processor and use that processor
* as a player to playback the media.
* During the processor's Configured state, two "pass-thru" codecs,
* PreAccessCodec and PostAccessCodec, are set on the video track.
* These codecs are used to get access to individual video frames
* of the media.
* Much of the code is just standard code to present media in JMF.
public boolean open(MediaLocator ml) {
try {
p = Manager.createProcessor(ml);
} catch (Exception e) {
System.err.println("Failed to create a processor from the given url: " + e);
return false;
p.addControllerListener(this);
// Put the Processor into configured state.
p.configure();
if (!waitForState(p.Configured)) {
System.err.println("Failed to configure the processor.");
return false;
// So I can use it as a player.
p.setContentDescriptor(null);
// Obtain the track controls.
TrackControl tc[] = p.getTrackControls();
if (tc == null) {
System.err.println("Failed to obtain track controls from the processor.");
return false;
// Search for the track control for the video track.
TrackControl videoTrack = null;
for (int i = 0; i < tc.length; i++) {
if (tc.getFormat() instanceof VideoFormat) {
videoTrack = tc[i];
break;
if (videoTrack == null) {
System.err.println("The input media does not contain a video track.");
return false;
System.err.println("Video format: " + videoTrack.getFormat());
// Instantiate and set the frame access codec to the data flow path.
try {
Codec codec[] = { new PreAccessCodec(),
new PostAccessCodec()};
videoTrack.setCodecChain(codec);
} catch (UnsupportedPlugInException e) {
System.err.println("The process does not support effects.");
// Realize the processor.
p.prefetch();
if (!waitForState(p.Prefetched)) {
System.err.println("Failed to realize the processor.");
return false;
// Display the visual & control component if there's one.
setLayout(new BorderLayout());
Component cc;
Component vc;
if ((vc = p.getVisualComponent()) != null) {
add("Center", vc);
if ((cc = p.getControlPanelComponent()) != null) {
add("South", cc);
// Start the processor.
p.start();
setVisible(true);
return true;
public void addNotify() {
super.addNotify();
pack();
* Block until the processor has transitioned to the given state.
* Return false if the transition failed.
boolean waitForState(int state) {
synchronized (waitSync) {
try {
while (p.getState() != state && stateTransitionOK)
waitSync.wait();
} catch (Exception e) {}
return stateTransitionOK;
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
if (evt instanceof ConfigureCompleteEvent ||
evt instanceof RealizeCompleteEvent ||
evt instanceof PrefetchCompleteEvent) {
synchronized (waitSync) {
stateTransitionOK = true;
waitSync.notifyAll();
} else if (evt instanceof ResourceUnavailableEvent) {
synchronized (waitSync) {
stateTransitionOK = false;
waitSync.notifyAll();
} else if (evt instanceof EndOfMediaEvent) {
p.close();
System.exit(0);
* Main program
public static void main(String [] args) throws IOException {
/*if (args.length == 0) {
prUsage();
System.exit(0);
//String url = args[0];
String url = new String ("file:D:FiMs/avpr.avi");
if (url.indexOf(":") < 0) {
prUsage();
System.exit(0);
MediaLocator ml;
//MediaPlayer mp1 = new javax.media.bean.playerbean.MediaPlayer();
//mp1.setMediaLocation(new java.lang.String("file:D:/FiMs/299_01_hi.mpg"));
//mp1.start();
if ((ml = new MediaLocator(url)) == null) {
System.err.println("Cannot build media locator from: " + url);
System.exit(0);
FrameAccess fa = new FrameAccess();
if (!fa.open(ml))
System.exit(0);
static void prUsage() {
System.err.println("Usage: java FrameAccess <url>");
* Inner class.
* A pass-through codec to access to individual frames.
public class PreAccessCodec implements Codec {
* Callback to access individual video frames.
void accessFrame(Buffer frame) {
// For demo, we'll just print out the frame #, time &
// data length.
long t = (long)(frame.getTimeStamp()/10000000f);
System.err.println("Pre: frame #: " + frame.getSequenceNumber() +
", time: " + ((float)t)/100f +
", len: " + frame.getLength());
* The code for a pass through codec.
// We'll advertize as supporting all video formats.
protected Format supportedIns[] = new Format [] {
new VideoFormat(null)
// We'll advertize as supporting all video formats.
protected Format supportedOuts[] = new Format [] {
new VideoFormat(null)
Format input = null, output = null;
public String getName() {
return "Pre-Access Codec";
// No op.
public void open() {
// No op.
public void close() {
// No op.
public void reset() {
public Format [] getSupportedInputFormats() {
return supportedIns;
public Format [] getSupportedOutputFormats(Format in) {
if (in == null)
return supportedOuts;
else {
// If an input format is given, we use that input format
// as the output since we are not modifying the bit stream
// at all.
Format outs[] = new Format[1];
outs[0] = in;
return outs;
public Format setInputFormat(Format format) {
input = format;
return input;
public Format setOutputFormat(Format format) {
output = format;
return output;
public int process(Buffer in, Buffer out) {
// This is the "Callback" to access individual frames.
accessFrame(in);
// Swap the data between the input & output.
Object data = in.getData();
in.setData(out.getData());
out.setData(data);
// Copy the input attributes to the output
out.setFormat(in.getFormat());
out.setLength(in.getLength());
out.setOffset(in.getOffset());
return BUFFER_PROCESSED_OK;
public Object[] getControls() {
return new Object[0];
public Object getControl(String type) {
return null;
public class PostAccessCodec extends PreAccessCodec {
// We'll advertize as supporting all video formats.
public PostAccessCodec() {
supportedIns = new Format [] {
new RGBFormat()
* Callback to access individual video frames.
void accessFrame(Buffer frame) {
// For demo, we'll just print out the frame #, time &
// data length.
long t = (long)(frame.getTimeStamp()/10000000f);
System.err.println("Post: frame #: " + frame.getSequenceNumber() +
", time: " + ((float)t)/100f +
", len: " + frame.getLength());
public String getName() {
return "Post-Access Codec";
and here is what itprabhu5 proposed to use to convert and save the frames as .png(or .jpeg in the same way)
import java.io.*;
import java.util.*;
import java.awt.*;
import java.awt.image.*;
import javax.imageio.*;
import javax.media.*;
import javax.media.control.*;
import javax.media.format.*;
import javax.media.util.*;
* Grabs a frame from a Webcam, overlays the current date and time, and saves the frame as a PNG to c:\webcam.png
* @author David
* @version 1.0, 16/01/2004
public class FrameGrab
public static void main(String[] args) throws Exception
// Create capture device
CaptureDeviceInfo deviceInfo = CaptureDeviceManager.getDevice("vfw:Microsoft WDM Image Capture (Win32):0");
Player player = Manager.createRealizedPlayer(deviceInfo.getLocator());
player.start();
// Wait a few seconds for camera to initialise (otherwise img==null)
Thread.sleep(2500);
// Grab a frame from the capture device
FrameGrabbingControl frameGrabber = (FrameGrabbingControl)player.getControl("javax.media.control.FrameGrabbingControl");
Buffer buf = frameGrabber.grabFrame();
// Convert frame to an buffered image so it can be processed and saved
Image img = (new BufferToImage((VideoFormat)buf.getFormat()).createImage(buf));
BufferedImage buffImg = new BufferedImage(img.getWidth(null), img.getHeight(null), BufferedImage.TYPE_INT_RGB);
Graphics2D g = buffImg.createGraphics();
g.drawImage(img, null, null);
// Overlay curent time on image
g.setColor(Color.RED);
g.setFont(new Font("Verdana", Font.BOLD, 16));
g.drawString((new Date()).toString(), 10, 25);
// Save image to disk as PNG
ImageIO.write(buffImg, "png", new File("c:\\webcam.png"));
// Stop using webcam
player.close();
player.deallocate();
System.exit(0);
however, i am unable to use it together with my code... i m not even sure if im using it at the right place.. (note that u will have to discard some lines from the second code, because it is actually grabbing frames from a webcam in that example)
if any1 can make it happen please help me. thx. -
Win7-64 Photoshop CC blank Save As dialog, then crash, when working with video / frame animations
Hi, I recently updated to CC from CS6 and am having issues when working with PSDs containing video layers, or are set up as frame animations: When attempting to Save As, the dialog will be completely blank except for the Save and Cancel buttons. If I press cancel, then return to Save As, CC then often crashes.
Here is the Error Event from Event Viewer:
Faulting application name: Photoshop.exe, version: 14.0.0.0, time stamp: 0x5176451b
Faulting module name: MediaCoreIF.DLL, version: 7.0.0.0, time stamp: 0x51573a21
Exception code: 0xc0000005
Fault offset: 0x00000000001fca98
Faulting process id: 0x750
Faulting application start time: 0x01ce9e1925a5045b
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Photoshop.exe
Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\MediaCoreIF.DLL
Report Id: db6d5f8f-0a0c-11e3-9df9-0026b9cc01d1
So far I am only having these issues if I have been working with video layers and then frame animations. Frame animations in particular seem to cause instability as I can often work with video layers all day without a problem. Then if I import video frames to layers, or open a PSD containing a frame animation, the Save As may not necessarily work.
Sometimes closing and restarting Photoshop will allow me to save again, but then sometimes a whole system reboot is required. It is only temporary though.
I am not running antivirus software or other apps aside from what starts at boot.Frustrating that this thread has petered out, since I'm having the exact same issue. Did you ever find a way to improved stability?
Also of note, the issue followed me across machines. Two weeks ago I purchased a new machine, figured if that didn't solve the problem nothing would... It didn't. :\
The only similar factors are that the machines both are 64bit Windows 7 (a fresh OEM install on the new box) and have nVidia-brand graphics cards. (Again, though - not the SAME graphics card, picked up a new one with the new machine.) No drive cloning was involved: this is completely new hardware, a fresh factory install of Windows 7, different antivirus (went from AVG to Avast), and new download of Photoshop CC from CreativeCloud.
Looks like our event details are quite similar, too.
Log Name:
Application
Source:
Application Error
Date:
4/6/2014 1:57:39 PM
Event ID:
1000
Task Category: (100)
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
REDACTED
Description:
Faulting application name: Photoshop.exe, version: 14.2.1.570, time stamp: 0x52f4a9f2
Faulting module name: MediaCoreIF.DLL, version: 7.0.0.0, time stamp: 0x51573a21
Exception code: 0xc0000005
Fault offset: 0x00000000001fca98
Faulting process id: 0x1ca4
Faulting application start time: 0x01cf51c68639ec43
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Photoshop.exe
Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\MediaCoreIF.DLL
Report Id: 5268f22b-bdbd-11e3-b9df-d850e65afc6f -
Hardware Rules don't work - failed to return a task
I am trying to make some post-imaging changes and though I'd give the Hardware Rules a go ( which I haven't used for a long, long time .. not in ZCM at least ). I am not getting an error similar to :
http://forums.novell.com/novell/nove...rror-91-a.html
Except for mine doesn't have an error code, it just says "Error: Failed to return a task" when I check for work to do manually ( F9 when running img on the device ). This device has been factory imaged using the image supplied with Zenworks agent installed and zac fsg -d was done before hutdown. I am not sure if that matters or not as I belive h/w rules are supposed to apply to both registered and non-registered devices ?
Anyway, here is a pbserv.log:
Mon Jan 9 18:49:12 2012 -- [LicenseCheck] Checking Imaging License
Mon Jan 9 18:49:12 2012 -- [RNT] Server GUID is: 96cbb868c5389a6370fa25cae0053449
Mon Jan 9 18:49:12 2012 -- [RNT] Imaging License Info: 1
Mon Jan 9 18:49:12 2012 -- [LC] open connection, 10.129.50.10
Mon Jan 9 18:49:12 2012 -- [PCV] received PROXY_CMD_VERSION
Mon Jan 9 18:49:12 2012 -- [HC] versions: 10, 10, 103305
Mon Jan 9 18:49:12 2012 -- [PCV] done PROXY_CMD_VERSION
Mon Jan 9 18:49:12 2012 -- [PCGNT] received PROXY_CMD_GET_NEXT_STEP
Mon Jan 9 18:49:12 2012 -- [RNT] WS GUID = "db6f55286cb56c4f8b4ce1267104188e"
Mon Jan 9 18:49:12 2012 -- [RNT] GWIL = 5176
Mon Jan 9 18:49:12 2012 -- [RNT] Received Workstation Information:
Dumping Workstation Information:
WorkstationInformation.signature ............ ZENWSINF
WorkstationInformation.version .............. 6
WorkstationInformation.length ............... 5176
WorkstationInformation.Chipset .............. Intel(R) Corporation 1204 Mhz
WorkstationInformation.Video ................ Intel Corporation Unknown device 0x0046
WorkstationInformation.Network .............. Intel Corporation Unknown device 0x0082
WorkstationInformation.Soundcard ............ Intel Corporation Unknown device 0x3B56
WorkstationInformation.Diskcontroller ....... IDE
WorkstationInformation.MACAddress............ 20:6a:8a:64:ff:8a
WorkstationInformation.ipAddress ............ 10.129.50.10
WorkstationInformation.BiosAssetTag ......... Base Board Asset Tag
WorkstationInformation.BiosSerialnumber ..... 14704211
WorkstationInformation.BiosVersion .......... INSYDE V1.24 05/06/2011
WorkstationInformation.SystemManufacturer ... Acer
WorkstationInformation.ProductName .......... Aspire One 753
WorkstationInformation.HarddriveSizeMB ...... 305245
WorkstationInformation.RAM .................. 4096
WorkstationInformation.BootMedia ............ 3
WorkstationInformation.zenPartitionType...... 0x00
Mon Jan 9 18:49:12 2012 -- [RNT] PSI size = 164
Mon Jan 9 18:49:12 2012 -- [RNT] Received PrebootState Information:
Dumping PrebootStateInformation:
PrebootStateInformation.signature ............ ZENPBINF
Structure Version ... 3
Structure Length ... 164
Version ............... 0
Flags ................. 0
State ................. 4
Tree ID ................
Job ID ................
Task ID ................ 0
Task Completion Code ... 0
Mon Jan 9 18:49:12 2012 -- [RNT] Error String:Err Fie ortr ak
Mon Jan 9 18:49:12 2012 -- [RNT] Server GUID is: 96cbb868c5389a6370fa25cae0053449
Mon Jan 9 18:49:12 2012 -- [RNT] Error SGNT: 2003
Mon Jan 9 18:49:12 2012 -- [RNT] GNT returned 2003
Mon Jan 9 18:49:12 2012 -- [RNT] Sending PrebootState Information:
Dumping PrebootStateInformation:
PrebootStateInformation.signature ............ ZENPBINF
Structure Version ... 3
Structure Length ... 164
Version ............... 0
Flags ................. 0
State ................. 4
Tree ID ................
Job ID ................
Task ID ................ 0
Task Completion Code ... 0
Mon Jan 9 18:49:12 2012 -- [PCGNT] done PROXY_CMD_GET_NEXT_STEP
Mon Jan 9 18:49:12 2012 -- [PCC] received PROXY_CMD_CLOSE
Mon Jan 9 18:49:12 2012 -- [PCC] done PROXY_CMD_CLOSE
Mon Jan 9 18:49:12 2012 -- [LC] close connection, 10.129.50.10
Mon Jan 9 18:49:12 2012 -- [ECC] CS
Now I wonder what that Error SGNT might mean ..
Originally I wanted to push just a linked application bundle ( a batch script to run ) but eventually tried adding our standard base image to no avail.
When I try to apply the same imaging bundle to a different notebook ( using a different h/w rule ) - clearly using the right ProductName or BiosSerialnumber - it simply returns "No work to do". Which is better than failing to return a task but still .. doesn't do any work, really. Here it is:
Mon Jan 9 19:00:37 2012 -- [LicenseCheck] Checking Imaging License
Mon Jan 9 19:00:37 2012 -- [RNT] Server GUID is: 96cbb868c5389a6370fa25cae0053449
Mon Jan 9 19:00:37 2012 -- [RNT] Imaging License Info: 1
Mon Jan 9 19:00:37 2012 -- [LC] open connection, 10.129.50.11
Mon Jan 9 19:00:37 2012 -- [PCV] received PROXY_CMD_VERSION
Mon Jan 9 19:00:37 2012 -- [HC] versions: 10, 10, 103305
Mon Jan 9 19:00:37 2012 -- [PCV] done PROXY_CMD_VERSION
Mon Jan 9 19:00:37 2012 -- [PCGNT] received PROXY_CMD_GET_NEXT_STEP
Mon Jan 9 19:00:37 2012 -- [RNT] WS GUID = "44398adf69915a4c8de5a15589ffd679"
Mon Jan 9 19:00:37 2012 -- [RNT] GWIL = 5176
Mon Jan 9 19:00:37 2012 -- [RNT] Received Workstation Information:
Dumping Workstation Information:
WorkstationInformation.signature ............ ZENWSINF
WorkstationInformation.version .............. 6
WorkstationInformation.length ............... 5176
WorkstationInformation.Chipset .............. Intel(R) Corporation Pentium M processor 1200 Mhz
WorkstationInformation.Video ................ Intel Corporation Unknown device 0x2A43
WorkstationInformation.Network .............. Intel Corporation Unknown device 0x422C
WorkstationInformation.Soundcard ............ Intel Corporation HD Audio Controller
WorkstationInformation.Diskcontroller ....... IDE
WorkstationInformation.MACAddress............ 60:eb:69:35:5d:2d
WorkstationInformation.ipAddress ............ 10.129.50.11
WorkstationInformation.BiosAssetTag ......... Base Board Asset Tag
WorkstationInformation.BiosSerialnumber ..... 10102849
WorkstationInformation.BiosVersion .......... INSYDE v1.3310 03/25/2010
WorkstationInformation.SystemManufacturer ... Acer
WorkstationInformation.ProductName .......... AO752
WorkstationInformation.HarddriveSizeMB ...... 238475
WorkstationInformation.RAM .................. 2048
WorkstationInformation.BootMedia ............ 3
WorkstationInformation.zenPartitionType...... 0x00
Mon Jan 9 19:00:37 2012 -- [RNT] PSI size = 164
Mon Jan 9 19:00:37 2012 -- [RNT] Received PrebootState Information:
Dumping PrebootStateInformation:
PrebootStateInformation.signature ............ ZENPBINF
Structure Version ... 3
Structure Length ... 164
Version ............... 0
Flags ................. 0
State ................. 0
Tree ID ................ c7ebeac25e25b763ad08e6c18bd67b44
Job ID ................
Task ID ................ 0
Task Completion Code ... 0
Mon Jan 9 19:00:37 2012 -- [RNT] Error String:N okt o
Mon Jan 9 19:00:37 2012 -- [RNT] Server GUID is: 96cbb868c5389a6370fa25cae0053449
Mon Jan 9 19:00:37 2012 -- [RNT] GNT returned 0
Mon Jan 9 19:00:37 2012 -- [RNT] Sending PrebootState Information:
Dumping PrebootStateInformation:
PrebootStateInformation.signature ............ ZENPBINF
Structure Version ... 3
Structure Length ... 164
Version ............... 0
Flags ................. 0
State ................. 0
Tree ID ................ c7ebeac25e25b763ad08e6c18bd67b44
Job ID ................
Task ID ................ 0
Task Completion Code ... 0
Mon Jan 9 19:00:37 2012 -- [RNT] XML Size = 85
Mon Jan 9 19:00:37 2012 -- [RNT] XML is = <ZENworks-Imaging><Type>Reboot-Command</Type><ErrCode>0</ErrCode></ZENworks-Imaging>
Mon Jan 9 19:00:37 2012 -- [PCGNT] done PROXY_CMD_GET_NEXT_STEP
Mon Jan 9 19:00:37 2012 -- [PCC] received PROXY_CMD_CLOSE
Mon Jan 9 19:00:37 2012 -- [PCC] done PROXY_CMD_CLOSE
Mon Jan 9 19:00:37 2012 -- [LC] close connection, 10.129.50.11
Mon Jan 9 19:00:37 2012 -- [ECC] CS
Am I missing something here ?Try Clearing the ZISD on the device and see if it follows the rules.
If so, we can go from there..............
On 1/9/2012 2:16 AM, atrofimov wrote:
>
> I am trying to make some post-imaging changes and though I'd give the
> Hardware Rules a go ( which I haven't used for a long, long time .. not
> in ZCM at least ). I am not getting an error similar to :
>
> http://forums.novell.com/novell/nove...rror-91-a.html
>
> Except for mine doesn't have an error code, it just says "Error: Failed
> to return a task" when I check for work to do manually ( F9 when running
> img on the device ). This device has been factory imaged using the image
> supplied with Zenworks agent installed and zac fsg -d was done before
> hutdown. I am not sure if that matters or not as I belive h/w rules are
> supposed to apply to both registered and non-registered devices ?
>
> Anyway, here is a pbserv.log:
>> Mon Jan 9 18:49:12 2012 -- [LicenseCheck] Checking Imaging License
>> Mon Jan 9 18:49:12 2012 -- [RNT] Server GUID is:
>> 96cbb868c5389a6370fa25cae0053449
>> Mon Jan 9 18:49:12 2012 -- [RNT] Imaging License Info: 1
>> Mon Jan 9 18:49:12 2012 -- [LC] open connection, 10.129.50.10
>> Mon Jan 9 18:49:12 2012 -- [PCV] received PROXY_CMD_VERSION
>> Mon Jan 9 18:49:12 2012 -- [HC] versions: 10, 10, 103305
>> Mon Jan 9 18:49:12 2012 -- [PCV] done PROXY_CMD_VERSION
>> Mon Jan 9 18:49:12 2012 -- [PCGNT] received PROXY_CMD_GET_NEXT_STEP
>> Mon Jan 9 18:49:12 2012 -- [RNT] WS GUID =
>> "db6f55286cb56c4f8b4ce1267104188e"
>> Mon Jan 9 18:49:12 2012 -- [RNT] GWIL = 5176
>> Mon Jan 9 18:49:12 2012 -- [RNT] Received Workstation Information:
>> Dumping Workstation Information:
>> WorkstationInformation.signature ............ ZENWSINF
>> WorkstationInformation.version .............. 6
>> WorkstationInformation.length ............... 5176
>> WorkstationInformation.Chipset .............. Intel(R) Corporation
>> 1204 Mhz
>> WorkstationInformation.Video ................ Intel Corporation
>> Unknown device 0x0046
>> WorkstationInformation.Network .............. Intel Corporation
>> Unknown device 0x0082
>> WorkstationInformation.Soundcard ............ Intel Corporation
>> Unknown device 0x3B56
>> WorkstationInformation.Diskcontroller ....... IDE
>> WorkstationInformation.MACAddress............ 20:6a:8a:64:ff:8a
>> WorkstationInformation.ipAddress ............ 10.129.50.10
>> WorkstationInformation.BiosAssetTag ......... Base Board Asset Tag
>> WorkstationInformation.BiosSerialnumber ..... 14704211
>> WorkstationInformation.BiosVersion .......... INSYDE V1.24
>> 05/06/2011
>> WorkstationInformation.SystemManufacturer ... Acer
>> WorkstationInformation.ProductName .......... Aspire One 753
>> WorkstationInformation.HarddriveSizeMB ...... 305245
>> WorkstationInformation.RAM .................. 4096
>> WorkstationInformation.BootMedia ............ 3
>> WorkstationInformation.zenPartitionType...... 0x00
>> Mon Jan 9 18:49:12 2012 -- [RNT] PSI size = 164
>> Mon Jan 9 18:49:12 2012 -- [RNT] Received PrebootState Information:
>> Dumping PrebootStateInformation:
>> PrebootStateInformation.signature ............ ZENPBINF
>> Structure Version ... 3
>> Structure Length ... 164
>> Version ............... 0
>> Flags ................. 0
>> State ................. 4
>> Tree ID ................
>> Job ID ................
>> Task ID ................ 0
>> Task Completion Code ... 0
>> Mon Jan 9 18:49:12 2012 -- [RNT] Error String:Err Fie ortr ak
>> Mon Jan 9 18:49:12 2012 -- [RNT] Server GUID is:
>> 96cbb868c5389a6370fa25cae0053449
>> Mon Jan 9 18:49:12 2012 -- [RNT] Error SGNT: 2003
>> Mon Jan 9 18:49:12 2012 -- [RNT] GNT returned 2003
>> Mon Jan 9 18:49:12 2012 -- [RNT] Sending PrebootState Information:
>> Dumping PrebootStateInformation:
>> PrebootStateInformation.signature ............ ZENPBINF
>> Structure Version ... 3
>> Structure Length ... 164
>> Version ............... 0
>> Flags ................. 0
>> State ................. 4
>> Tree ID ................
>> Job ID ................
>> Task ID ................ 0
>> Task Completion Code ... 0
>> Mon Jan 9 18:49:12 2012 -- [PCGNT] done PROXY_CMD_GET_NEXT_STEP
>> Mon Jan 9 18:49:12 2012 -- [PCC] received PROXY_CMD_CLOSE
>> Mon Jan 9 18:49:12 2012 -- [PCC] done PROXY_CMD_CLOSE
>> Mon Jan 9 18:49:12 2012 -- [LC] close connection, 10.129.50.10
>> Mon Jan 9 18:49:12 2012 -- [ECC] CS
> Now I wonder what that Error SGNT might mean ..
>
> Originally I wanted to push just a linked application bundle ( a batch
> script to run ) but eventually tried adding our standard base image to
> no avail.
>
> When I try to apply the same imaging bundle to a different notebook (
> using a different h/w rule ) - clearly using the right ProductName or
> BiosSerialnumber - it simply returns "No work to do". Which is better
> than failing to return a task but still .. doesn't do any work, really.
> Here it is:
>> Mon Jan 9 19:00:37 2012 -- [LicenseCheck] Checking Imaging License
>> Mon Jan 9 19:00:37 2012 -- [RNT] Server GUID is:
>> 96cbb868c5389a6370fa25cae0053449
>> Mon Jan 9 19:00:37 2012 -- [RNT] Imaging License Info: 1
>> Mon Jan 9 19:00:37 2012 -- [LC] open connection, 10.129.50.11
>> Mon Jan 9 19:00:37 2012 -- [PCV] received PROXY_CMD_VERSION
>> Mon Jan 9 19:00:37 2012 -- [HC] versions: 10, 10, 103305
>> Mon Jan 9 19:00:37 2012 -- [PCV] done PROXY_CMD_VERSION
>> Mon Jan 9 19:00:37 2012 -- [PCGNT] received PROXY_CMD_GET_NEXT_STEP
>> Mon Jan 9 19:00:37 2012 -- [RNT] WS GUID =
>> "44398adf69915a4c8de5a15589ffd679"
>> Mon Jan 9 19:00:37 2012 -- [RNT] GWIL = 5176
>> Mon Jan 9 19:00:37 2012 -- [RNT] Received Workstation Information:
>> Dumping Workstation Information:
>> WorkstationInformation.signature ............ ZENWSINF
>> WorkstationInformation.version .............. 6
>> WorkstationInformation.length ............... 5176
>> WorkstationInformation.Chipset .............. Intel(R) Corporation
>> Pentium M processor 1200 Mhz
>> WorkstationInformation.Video ................ Intel Corporation
>> Unknown device 0x2A43
>> WorkstationInformation.Network .............. Intel Corporation
>> Unknown device 0x422C
>> WorkstationInformation.Soundcard ............ Intel Corporation HD
>> Audio Controller
>> WorkstationInformation.Diskcontroller ....... IDE
>> WorkstationInformation.MACAddress............ 60:eb:69:35:5d:2d
>> WorkstationInformation.ipAddress ............ 10.129.50.11
>> WorkstationInformation.BiosAssetTag ......... Base Board Asset Tag
>> WorkstationInformation.BiosSerialnumber ..... 10102849
>> WorkstationInformation.BiosVersion .......... INSYDE v1.3310
>> 03/25/2010
>> WorkstationInformation.SystemManufacturer ... Acer
>> WorkstationInformation.ProductName .......... AO752
>> WorkstationInformation.HarddriveSizeMB ...... 238475
>> WorkstationInformation.RAM .................. 2048
>> WorkstationInformation.BootMedia ............ 3
>> WorkstationInformation.zenPartitionType...... 0x00
>> Mon Jan 9 19:00:37 2012 -- [RNT] PSI size = 164
>> Mon Jan 9 19:00:37 2012 -- [RNT] Received PrebootState Information:
>> Dumping PrebootStateInformation:
>> PrebootStateInformation.signature ............ ZENPBINF
>> Structure Version ... 3
>> Structure Length ... 164
>> Version ............... 0
>> Flags ................. 0
>> State ................. 0
>> Tree ID ................ c7ebeac25e25b763ad08e6c18bd67b44
>> Job ID ................
>> Task ID ................ 0
>> Task Completion Code ... 0
>> Mon Jan 9 19:00:37 2012 -- [RNT] Error String:N okt o
>> Mon Jan 9 19:00:37 2012 -- [RNT] Server GUID is:
>> 96cbb868c5389a6370fa25cae0053449
>> Mon Jan 9 19:00:37 2012 -- [RNT] GNT returned 0
>> Mon Jan 9 19:00:37 2012 -- [RNT] Sending PrebootState Information:
>> Dumping PrebootStateInformation:
>> PrebootStateInformation.signature ............ ZENPBINF
>> Structure Version ... 3
>> Structure Length ... 164
>> Version ............... 0
>> Flags ................. 0
>> State ................. 0
>> Tree ID ................ c7ebeac25e25b763ad08e6c18bd67b44
>> Job ID ................
>> Task ID ................ 0
>> Task Completion Code ... 0
>> Mon Jan 9 19:00:37 2012 -- [RNT] XML Size = 85
>> Mon Jan 9 19:00:37 2012 -- [RNT] XML is =
>> <ZENworks-Imaging><Type>Reboot-Command</Type><ErrCode>0</ErrCode></ZENworks-Imaging>
>> Mon Jan 9 19:00:37 2012 -- [PCGNT] done PROXY_CMD_GET_NEXT_STEP
>> Mon Jan 9 19:00:37 2012 -- [PCC] received PROXY_CMD_CLOSE
>> Mon Jan 9 19:00:37 2012 -- [PCC] done PROXY_CMD_CLOSE
>> Mon Jan 9 19:00:37 2012 -- [LC] close connection, 10.129.50.11
>> Mon Jan 9 19:00:37 2012 -- [ECC] CS
>>
>
> Am I missing something here ?
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
Several applications fail to open
During my last software update my iMac with an 2.4 GHz Intel Core 2 Duo and OS 10.5.8 froze and a message popped up essentially saying that I had to restart the computer. Ever since this several applications fail on launch and will not open at all. These applications include Safari, Mail, iTunes, Software Update, and XCode, but I'm sure there are porbably more. All the applications that I have found that fail have been Apple applications. All attempts of getting Software Update and Safari to open have failed so far. I also tried reinstalling the Java update that was updating when it timed out. Below are some of the reports from the fail screen.
System Info:
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
Graphics: kHW_ATIr600M74Item, ATI Radeon HD 2400, spdisplays_pcie_device, 128 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.21)
Bluetooth: Version 2.1.9f10, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD2500AAJS-40VWA1, 232.89 GB
Parallel ATA Device: OPTIARC DVD RW AD-5630A
USB Device: Built-in iSight, (null) mA
USB Device: Keyboard Hub, (null) mA
USB Device: Apple Optical USB Mouse, (null) mA
USB Device: Apple Keyboard, (null) mA
USB Device: BRCM2046 Hub, (null) mA
USB Device: Bluetooth USB Host Controller, (null) mA
USB Device: IR Receiver, (null) mA
Safari Fail Message:
Process: Safari [209]
Path: /Applications/Safari.app/Contents/MacOS/Safari
Identifier: com.apple.Safari
Version: ??? (???)
Build Info: WebBrowser-75332101~2
Code Type: X86 (Native)
Parent Process: launchd [99]
Interval Since Last Report: 758 sec
Crashes Since Last Report: 3
Per-App Interval Since Last Report: 0 sec
Per-App Crashes Since Last Report: 2
Date/Time: 2011-08-10 21:06:13.606 -0400
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 6F392753-6784-4866-9FB9-5309238AC16C
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: __ZN3JSC15JSWrapperObject12markChildrenERNS_9MarkStackE
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
Mail Fail Report:
Process: Mail [225]
Path: /Applications/Mail.app/Contents/MacOS/Mail
Identifier: com.apple.mail
Version: ??? (???)
Build Info: Mail-9360000~1
Code Type: X86 (Native)
Parent Process: launchd [99]
Interval Since Last Report: 66 sec
Crashes Since Last Report: 2
Per-App Interval Since Last Report: 0 sec
Per-App Crashes Since Last Report: 2
Date/Time: 2011-08-10 21:07:21.423 -0400
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 6F392753-6784-4866-9FB9-5309238AC16C
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: __ZN3JSC15JSWrapperObject12markChildrenERNS_9MarkStackE
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
Software Update Fail:
Process: Software Update [232]
Path: /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update
Identifier: com.apple.SoftwareUpdate
Version: ??? (???)
Build Info: SoftwareUpdate-1820000~1
Code Type: X86 (Native)
Parent Process: launchd [99]
Interval Since Last Report: 61 sec
Crashes Since Last Report: 1
Per-App Interval Since Last Report: 0 sec
Per-App Crashes Since Last Report: 7
Date/Time: 2011-08-10 21:08:24.501 -0400
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 6F392753-6784-4866-9FB9-5309238AC16C
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: __ZN3JSC15JSWrapperObject12markChildrenERNS_9MarkStackE
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCoreWell when I was backing up the hard drive to the new external drive, the same error message popped up that forced me to restart the computer. It gave me an error message when it came back on that read:
Interval Since Last Panic Report: 8491178 sec
Panics Since Last Report: 2
Anonymous UUID: 6F392753-6784-4866-9FB9-5309238AC16C
Sun Aug 14 21:34:33 2011
panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x0019ee5a, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x23bda004, CR3: 0x00d4b000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x23bda004, ECX: 0x23bda004, EDX: 0x23bda004
CR2: 0x23bda004, EBP: 0x34b17ac8, ESI: 0x0400f903, EDI: 0x00000000
EFL: 0x00010297, EIP: 0x0019ee5a, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x34b178e8 : 0x12b4c6 (0x45f91c 0x34b1791c 0x13355c 0x0)
0x34b17938 : 0x1ab0fe (0x469a98 0x19ee5a 0xe 0x469248)
0x34b17a18 : 0x1a1713 (0x34b17a30 0x49f5c5b 0x34b17ac8 0x19ee5a)
0x34b17a28 : 0x19ee5a (0xe 0x2f360048 0x30300070 0x1000010)
0x34b17ac8 : 0x1d98fe (0x23bda004 0x23bdc477 0x1e 0x400)
0x34b17b08 : 0x1d999f (0x400f8e2 0xc 0x0 0x0)
0x34b17b38 : 0x36e3cc (0x4097c70 0x400f800 0x103 0x49a0ba4)
0x34b17f78 : 0x3e3a7f (0x40e204c 0x49a0b60 0x49a0ba4 0x4bb3ba0)
0x34b17fc8 : 0x1a1c0a (0x4b3b840 0x0 0x1a40b5 0x6abf208)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb0309258
BSD process name corresponding to current thread: mds
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: iMac8,1 (Mac-F226BEC8)
System uptime in nanoseconds: 6601636731386
unloaded kexts:
(none)
loaded kexts:
com.seagate.driver.PowSecLeafDriver_10_4 5.0.1
com.seagate.driver.PowSecLeafDriver_10_5 5.0.1
com.seagate.driver.PowSecDriverCore 5.0.1
com.apple.filesystems.webdav 1.8 - last loaded 3995716099919
com.apple.driver.IOBluetoothBNEPDriver 2.1.9f10
com.apple.driver.InternalModemSupport 2.4.0
com.apple.filesystems.autofs 2.0.2
com.apple.driver.AppleHDAPlatformDriver 1.7.1a2
com.apple.iokit.IOBluetoothSerialManager 2.1.9f10
com.apple.driver.DiskImages 199
com.apple.Dont_Steal_Mac_OS_X 6.0.3
com.apple.iokit.CHUDUtils 201
com.apple.driver.AppleHDAHardwareConfigDriver 1.7.1a2
com.apple.iokit.CHUDProf 211
com.apple.driver.AppleUpstreamUserClient 2.7.5
com.apple.driver.BroadcomUSBBluetoothHCIController 2.1.9f10
com.apple.driver.AppleHDA 1.7.1a2
com.apple.kext.ATY_Iago 5.4.8
com.apple.driver.AppleHWSensor 1.9d0
com.apple.driver.AppleGraphicsControl 2.8.15
com.apple.driver.AppleTyMCEDriver 1.0.0d28
com.apple.iokit.AppleYukon2 3.1.13b2
com.apple.driver.AirPortBrcm43xx 366.91.21
com.apple.driver.AppleHDAController 1.7.1a2
com.apple.driver.AudioIPCDriver 1.0.6
com.apple.ATIRadeonX2000 5.4.8
com.apple.driver.AppleIRController 113
com.apple.driver.ACPI_SMC_PlatformPlugin 3.4.0a17
com.apple.driver.AppleLPC 1.3.1
com.apple.driver.AppleBacklight 1.6.0
com.apple.iokit.IOFireWireIP 1.7.7
com.apple.driver.AppleUSBHIDMouse 1.2.4b3
com.apple.driver.AppleHIDKeyboard 1.0.9b4
com.apple.driver.iTunesPhoneDriver 1.0
com.apple.iokit.IOUSBMassStorageClass 2.0.8
com.apple.driver.AppleUSBMergeNub 3.5.2
com.apple.driver.XsanFilter 2.7.91
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.1.1
com.apple.iokit.SCSITaskUserClient 2.1.1
com.apple.driver.AppleUSBHub 3.4.9
com.apple.iokit.IOUSBUserClient 3.5.2
com.apple.driver.AppleUSBEHCI 3.4.6
com.apple.driver.AppleFileSystemDriver 1.1.0
com.apple.iokit.IOATAPIProtocolTransport 1.5.3
com.apple.iokit.IOAHCIBlockStorage 1.2.2
com.apple.driver.AppleEFINVRAM 1.2.0
com.apple.driver.AppleFWOHCI 3.9.7
com.apple.driver.AppleAHCIPort 1.7.0
com.apple.driver.AppleUSBUHCI 3.5.2
com.apple.driver.AppleIntelPIIXATA 2.0.1
com.apple.driver.AppleRTC 1.2.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIPCI 1.2.5
com.apple.driver.AppleACPIButtons 1.2.5
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.2.5
com.apple.driver.AppleAPIC 1.4
com.apple.security.seatbelt 107.12
com.apple.nke.applicationfirewall 1.8.77
com.apple.security.TMSafetyNet 3
com.apple.driver.AppleIntelCPUPowerManagement 76.2.0
com.apple.BootCache 30.4
com.apple.iokit.IOSerialFamily 9.4
com.apple.driver.DspFuncLib 1.7.1a2
com.apple.iokit.CHUDKernLib 201
com.apple.driver.AppleUSBBluetoothHCIController 2.1.9f10
com.apple.iokit.IOBluetoothFamily 2.1.9f10
com.apple.iokit.IO80211Family 216.1
com.apple.iokit.IOHDAFamily 1.7.1a2
com.apple.iokit.IOAudioFamily 1.6.9fc5
com.apple.kext.OSvKernDSPLib 1.1
com.apple.driver.IOPlatformPluginFamily 3.4.0a17
com.apple.driver.AppleSMC 2.3.1d1
com.apple.iokit.IONDRVSupport 1.7.3
com.apple.iokit.IOGraphicsFamily 1.7.3
com.apple.iokit.IONetworkingFamily 1.6.1
com.apple.driver.AppleHIDMouse 1.2.4b3
com.apple.iokit.IOUSBHIDDriver 3.4.6
com.apple.driver.AppleUSBComposite 3.2.0
com.apple.iokit.IOBDStorageFamily 1.5
com.apple.iokit.IODVDStorageFamily 1.5
com.apple.iokit.IOCDStorageFamily 1.5
com.apple.iokit.IOFireWireSerialBusProtocolTransport 1.5.2
com.apple.iokit.IOSCSIBlockCommandsDevice 2.1.1
com.apple.iokit.IOFireWireSBP2 1.9.8
com.apple.iokit.IOSCSIArchitectureModelFamily 2.1.1
com.apple.iokit.IOStorageFamily 1.5.6
com.apple.iokit.IOFireWireFamily 3.4.9
com.apple.iokit.IOAHCIFamily 1.5.0
com.apple.iokit.IOUSBFamily 3.5.2
com.apple.iokit.IOATAFamily 2.0.1
com.apple.driver.AppleEFIRuntime 1.2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.iokit.IOHIDFamily 1.5.5
com.apple.driver.AppleACPIPlatform 1.2.5
com.apple.iokit.IOACPIFamily 1.2.0
com.apple.iokit.IOPCIFamily 2.6
Is my drive corrupted? -
On Mac student ver, get DV video frame, output USB commands
Sorry if this is the wrong place. I did consider the machine vision and the instrument control forums, most of what I saw on these particular subjects were a couple years old, I am hoping the Mac support has changed. I am looking for an inexpensive way to get some measurements. Before obtaining the student version of LabView (Mac perferably) I want to see how 'easy' this is going to be, or if I should look at other solutions. I have some experience with LabView from the mid 90's, I think it was LabView 2. I figure this small project is a good way to get some LabView experience before we jump into a larger project and get some funding.
I have a small board that has a monochrome CCD chip on it with standard composite analog video out. I also have a Sony analog video to Firewire DV video converter. Mac video applications pick this up just fine. I want to grab frames from this video stream.
I have a hand held motion controller that has USB input. The vendor supplies a VI with it.
I want to send step movements to the motion controller, then analyze the video frame repeatably.
1) Is it possible to grab firewire DV video frames with LabView? Does the student version come with appropiate VI drivers? (What I saw in the Machine Vision forum was NI-IMAQ
2) Would the VI from the motion controller vendor possibly work on OS-X, or are VIs either Mac OS-X or Windows?
I had some other USB questions but I found the tutorial on NI-VISA which I think answers those.Hey phillman,
To do video capture with a firewire camera, you are going need the IMAQdx driver which is included in the NI Vision Acquisition Software. Unfortunately, as Adnan pointed out, this driver is unsupported on the Mac Operating system. In more bad news, the NI VISA driver is not really going to help you acquire frames from your firewire camera. As far as your motion controller vi's go, it would depend on the version that the vi's were written in. Contacting the motion controller vender would be your best bet in determining if there vi is compatible with the Mac OS X.
Sorry to be the bearer of bad news. Let us know if this helps.
Ben
Applications Engineering
National Instruments
Hope this helps.
-Ben
WaterlooLabs -
HI All
I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
I used IMAQ AVI Read Frame VI
for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisitionHi abdelhady,
I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
Thank you,
Emily C
Applications Engineer
National Instruments -
Photoshop CS3 crashes when importing video frames to layers.
This is perhaps not the correct place to post this, but I am new to the forums, as you can see.
I saw that there was a post about this sometime last year, and I tried all the methods offered to fix the problem, but none helped.
Each time I make an attempt to import video frames to layers, I get as far as the "select range to import" screen, and then when I select the range and click ok, it says "Adobe Photoshop has stopped working. A problem caused the program to stop working correctly." And then it closes.
My operating system is Windows XP, the photoshop type I use is CS3 as I mentioned before, and I have installed Quicktime 7.3.5.
I checked one of the files I tried to use with the Mediainfo program as suggested, and got the following:
Format: MPEG-4
Format profile: Quicktime
Codec ID: qt
File size: 176 MiB
Duration: 18mn 33s
Overall bit rate: 1 327 Kbps
Writing application: Lavf53.24.2
Hopefully this is enough information for someone out there to help me, because I haven't the slightest idea how to fix it. Thank you in advance.Convert the file in ffmpeg/ MPEGStreamclip or another tool or export it from Quicktime Pro using anotehr CoDec. PS just sucks at dealing with these compressed files and using such an old version doesn't help with contemporary digital video from a camera...
Mylenium -
OSD Install application fails.
Hi, i hope someone can help :)
Single install application step is failing after 4 hours waiting. The installation and discovery of the application was correct, return code 0, but the task sequence doesnt continue, its stops there for hours and then fails.
If i boot windows the aplication is correctly installed and working.
Im using SCCM2012 SP1.
Error on Status Messages:
The task sequence execution engine failed executing the action (Install MS Office 2010 Pro Plus) in the group (Install Applications) with the error code 2278556181Action output: ... ssage Setting URL = ***********, Ports = 80,443, CRL = false Setting Server Certificates. Setting Authenticator.Set authenticator in transport Setting Media Certificate.Sending StatusMessageSetting message signatures.Setting the authenticator.CLibSMSMessageWinHttpTransport::Send: URL: ***********:80 CCM_POST /ccm_system/requestRequest was succesful.hrInstallation, HRESULT=87d00215 (e:\nts_sccm_release\sms\client\osdeployment\installapplication\installapplication.cpp,808)pInstall->InstallApplications(saAppNames, sContinueOnError), HRESULT=87d00215 (e:\nts_sccm_release\sms\client\osdeployment\installapplication\main.cpp,277)Failed to Reconnect to existing job, hr=0x87d00215Reconnect Job request failed, hr=0x87d00215Install application action failed: 'Microsoft Office 2010 Pro Plus'. Error Code 0x87d00215Install application action cannot continue. ContinueOnErrorFlag is set to false.Install Static Applications failed, hr=0x87d00215. The operating system reported error 1: Incorrect function.
No errors on AppEnforce.log:
Prepared working directory: C:\Windows\ccmcache\1
Prepared command line: "C:\Windows\ccmcache\1\setup.exe" /adminfile office2010.MSP
Executing Command line: "C:\Windows\ccmcache\1\setup.exe" /adminfile office2010.MSP with system context
Working directory C:\Windows\ccmcache\1
Post install behavior is BasedOnExitCode
Waiting for process 3516 to finish. Timeout = 120 minutes.
Process 3516 terminated with exitcode: 0
Looking for exit code 0 in exit codes table...
Matched exit code 0 to a Success entry in exit codes table.
Performing detection of app deployment type Microsoft Office 2010 Pro
Plus(ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d,
revision 4) for system.
+++ Discovered application [AppDT Id:
ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d,
Revision: 4]
++++++ App enforcement completed (964
seconds) for App DT "Microsoft Office 2010 Pro Plus"
[ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d],
Revision: 4, User SID: ] ++++++
Regards,
Daniel BBtw, we have published 2 applications on the OSD TS and noticed the error is happening to both applications, it was working before.
Aplication installation fails after some hours, but its installed ...
smsts.log
Invoking App Management SDK to evaluate app polices InstallApplication 17/09/2013 16:09:34 2924 (0x0B6C)
CAppMgmtSDK::EvaluateAppPolicy ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.(null) DCMAgent 17/09/2013 16:09:34 2924 (0x0B6C)
App policy evaluation for application 'ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6' has started. Please refer to DCMAgent.log for the details on this job. JobID='{E5009A8E-63F4-4234-BF7A-FC99FD15167F}' InstallApplication 17/09/2013 16:09:34 2924 (0x0B6C)
Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/Application_f9c9997b-8d3a-459e-accd-57ed8ac79bf6'='{E5009A8E-63F4-4234-BF7A-FC99FD15167F}' InstallApplication 17/09/2013 16:09:34 2924 (0x0B6C)
Waiting for installation job to complete.. InstallApplication 17/09/2013 16:09:34 2924 (0x0B6C)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:34 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:34 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:34 1996 (0x07CC)
spCIStateStore->GetCIState( pszAppPolicyId, csPolicyRevision, (sUserSID.length()>0) ? sUserSID.c_str() : 0, &spPolicyState, 1), HRESULT=87d00215 (e:\nts_sccm_release\sms\dcm\sdk\cisdkclass.cpp,2088) DCMAgent 17/09/2013 16:09:34 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState - ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 Not found in CI state store. Marking CIs state as EvaluationFailed DCMAgent 17/09/2013 16:09:34 1996 (0x07CC)
NotifyProgress received: 16 (Application failed to evaluate ) InstallApplication 17/09/2013 16:09:34 1996 (0x07CC)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:34 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:34 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:34 1996 (0x07CC)
spCIStateStore->GetCIState( pszAppPolicyId, csPolicyRevision, (sUserSID.length()>0) ? sUserSID.c_str() : 0, &spPolicyState, 1), HRESULT=87d00215 (e:\nts_sccm_release\sms\dcm\sdk\cisdkclass.cpp,2088) DCMAgent 17/09/2013 16:09:34 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState - ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 Not found in CI state store. Marking CIs state as EvaluationFailed DCMAgent 17/09/2013 16:09:34 1996 (0x07CC)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:43 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:43 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:43 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 = Unknown DCMAgent 17/09/2013 16:09:43 1996 (0x07CC)
NotifyProgress received: 0 (No application state information is available ) InstallApplication 17/09/2013 16:09:43 1996 (0x07CC)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:44 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:44 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:44 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 = Unknown DCMAgent 17/09/2013 16:09:44 1996 (0x07CC)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 = AvailableForEnforcement DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
NotifyProgress received: 3 (Application is available for installation ) InstallApplication 17/09/2013 16:09:45 1996 (0x07CC)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 = AvailableForEnforcement DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 = AvailableForEnforcement DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 = AvailableForEnforcement DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 = AvailableForEnforcement DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 = AvailableForEnforcement DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
NotifyComplete received InstallApplication 17/09/2013 16:09:45 1996 (0x07CC)
NotifyComplete processed InstallApplication 17/09/2013 16:09:45 1996 (0x07CC)
Received job completion notification from DCM Agent InstallApplication 17/09/2013 16:09:45 2924 (0x0B6C)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:45 2924 (0x0B6C)
Policy evaluation for App successful InstallApplication 17/09/2013 16:09:45 2924 (0x0B6C)
Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/Application_f9c9997b-8d3a-459e-accd-57ed8ac79bf6'='' InstallApplication 17/09/2013 16:09:45 2924 (0x0B6C)
EvaluationJob complete InstallApplication 17/09/2013 16:09:45 2924 (0x0B6C)
Checking if the active request handle: {BE78A9F9-F9BC-409E-9AF9-0B1F8CE0CFAF} is valid. InstallApplication 17/09/2013 16:09:45 2924 (0x0B6C)
CoCreateInstance succeeded InstallApplication 17/09/2013 16:09:45 2924 (0x0B6C)
Active request handle: {BE78A9F9-F9BC-409E-9AF9-0B1F8CE0CFAF} is valid. InstallApplication 17/09/2013 16:09:45 2924 (0x0B6C)
Invoking App Management SDK to install application InstallApplication 17/09/2013 16:09:45 2924 (0x0B6C)
CAppMgmtSDK::EnforceAppPolicy ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.(null) DCMAgent 17/09/2013 16:09:45 2924 (0x0B6C)
Installing application 'ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6' has started. Please refer to DCMAgent.log for the details on this job. JobID='{42FB35A9-CCB5-4C30-91DA-B251B6893FF4}' InstallApplication 17/09/2013 16:09:45 2924 (0x0B6C)
Setting TSEnv variable 'SMSTSInstallApplicationJobID__ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/Application_f9c9997b-8d3a-459e-accd-57ed8ac79bf6'='{42FB35A9-CCB5-4C30-91DA-B251B6893FF4}' InstallApplication 17/09/2013 16:09:45 2924 (0x0B6C)
Waiting for installation job to complete.. InstallApplication 17/09/2013 16:09:45 2924 (0x0B6C)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 = AvailableForEnforcement DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 = AvailableForEnforcement DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 = AvailableForEnforcement DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 = AvailableForEnforcement DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 = AvailableForEnforcement DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
Passed in version 17 for ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
CAppMgmtSDK::GetEvaluationState ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 = AvailableForEnforcement DCMAgent 17/09/2013 16:09:45 1996 (0x07CC)
Waiting for job status notification... InstallApplication 17/09/2013 22:09:45 2924 (0x0B6C)
AppMgmtSDK handler is invalid. Trying to reconnect... InstallApplication 17/09/2013 22:09:45 2924 (0x0B6C)
GetAppMgmtSDKInterface successful InstallApplication 17/09/2013 22:09:45 2924 (0x0B6C)
Reconnecting to existing jobID '{42FB35A9-CCB5-4C30-91DA-B251B6893FF4}'.. InstallApplication 17/09/2013 22:09:45 2924 (0x0B6C)
spAgent->GetJob(jobId, &spAgentJob), HRESULT=87d00215 (e:\nts_sccm_release\sms\dcm\sdk\cisdkclass.cpp,1756) DCMAgent 17/09/2013 22:09:46 2924 (0x0B6C)
spAppMgmtSDK->SetEvaluationCallback( guidJobID, spNotifyCompPtr ), HRESULT=87d00215 (e:\nts_sccm_release\sms\client\osdeployment\installapplication\installapplication.cpp,404) InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Failed to Reconnect to existing job, hr=0x87d00215 InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Reconnect Job request failed, hr=0x87d00215 InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
ReconnectJob(spAppMgmtSDK, spCallback, guidJobID), HRESULT=87d00215 (e:\nts_sccm_release\sms\client\osdeployment\installapplication\installapplication.cpp,1152) InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
WaitforJobCompletion(spAppMgmtSDK, m_guidAppInstallJobID, ulAppInstallTimeout, nAppInstallRetryAttempts), HRESULT=87d00215 (e:\nts_sccm_release\sms\client\osdeployment\installapplication\installapplication.cpp,1041) InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Step 2 out of 2 complete InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Install application action failed: 'Microsoft Office 2010 Pro Plus'. Error Code 0x87d00215 InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Sending error status message InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Setting URL = http://*****, Ports = 80,443, CRL = false InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Setting Server Certificates. InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Setting Authenticator. InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Set authenticator in transport InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Setting Media Certificate. InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Sending StatusMessage InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Setting message signatures. InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Setting the authenticator. InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
CLibSMSMessageWinHttpTransport::Send: URL: *****:80 CCM_POST /ccm_system/request InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Request was succesful. InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Install application action cannot continue. ContinueOnErrorFlag is set to false. InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
hrInstallation, HRESULT=87d00215 (e:\nts_sccm_release\sms\client\osdeployment\installapplication\installapplication.cpp,808) InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
pInstall->InstallApplications(saAppNames, sContinueOnError), HRESULT=87d00215 (e:\nts_sccm_release\sms\client\osdeployment\installapplication\main.cpp,277) InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Install Static Applications failed, hr=0x87d00215 InstallApplication 17/09/2013 22:09:46 2924 (0x0B6C)
Process completed with exit code 2278556181 TSManager 17/09/2013 22:09:46 928 (0x03A0)
!--------------------------------------------------------------------------------------------! TSManager 17/09/2013 22:09:46 928 (0x03A0)
Failed to run the action: Microsoft Office 2010 SP1.
Item not found (Error: 87D00215; Source: CCM) TSManager 17/09/2013 22:09:46 928 (0x03A0)
MP server http://****. Ports 80,443. CRL=false. TSManager 17/09/2013 22:09:46 928 (0x03A0)
Setting authenticator TSManager 17/09/2013 22:09:46 928 (0x03A0)
Set authenticator in transport TSManager 17/09/2013 22:09:46 928 (0x03A0)
Sending StatusMessage TSManager 17/09/2013 22:09:46 928 (0x03A0)
Setting message signatures. TSManager 17/09/2013 22:09:46 928 (0x03A0)
Setting the authenticator. TSManager 17/09/2013 22:09:46 928 (0x03A0)
CLibSMSMessageWinHttpTransport::Send: URL: ****:80 CCM_POST /ccm_system/request TSManager 17/09/2013 22:09:46 928 (0x03A0)
Request was succesful. TSManager 17/09/2013 22:09:46 928 (0x03A0)
Set a global environment variable _SMSTSLastActionRetCode=-2016411115 TSManager 17/09/2013 22:09:46 928 (0x03A0)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 17/09/2013 22:09:46 928 (0x03A0)
Clear local default environment TSManager 17/09/2013 22:09:46 928 (0x03A0)
The execution engine ignored the failure of the action (Microsoft Office 2010 SP1) and continues execution TSManager 17/09/2013 22:09:46 928 (0x03A0)
CIAgent.log
CAgent::Initialize succeeded. CIAgent 17/09/2013 16:04:58 3100 (0x0C1C)
CI Agent successfully started up. CIAgent 17/09/2013 16:04:58 3100 (0x0C1C)
CAgent::CreateJob - Creating new CI Agent Job for machine CIAgent 17/09/2013 16:09:34 3052 (0x0BEC)
CAgent::EvaluateCIs CIAgent 17/09/2013 16:09:34 3104 (0x0C20)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::QueueEvent - Queueing event and incrementing semaphore Transition CIAgent 17/09/2013 16:09:34 3052 (0x0BEC)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::HandleEvent(Event=Transition, CurrentState=Init) CIAgent 17/09/2013 16:09:34 3104 (0x0C20)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): Client requesting CIAgentJob context info for key: StateMessagePriority CIAgent 17/09/2013 16:09:34 3104 (0x0C20)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): TransitionState(From=Init, To=WaitingForAssignedCI) for Event=Transition CIAgent 17/09/2013 16:09:34 3104 (0x0C20)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::QueueEvent - Queueing event and incrementing semaphore Transition CIAgent 17/09/2013 16:09:34 3104 (0x0C20)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): QueueDebug - Executing Event. CIAgent 17/09/2013 16:09:34 3104 (0x0C20)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::HandleEvent(Event=Transition, CurrentState=WaitingForAssignedCI) CIAgent 17/09/2013 16:09:34 4080 (0x0FF0)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::QueueEvent - Queueing event and incrementing semaphore DownloadCIs CIAgent 17/09/2013 16:09:34 4080 (0x0FF0)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): QueueDebug - Executing Event. CIAgent 17/09/2013 16:09:34 4080 (0x0FF0)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::HandleEvent(Event=DownloadCIs, CurrentState=WaitingForAssignedCI) CIAgent 17/09/2013 16:09:34 4076 (0x0FEC)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): TransitionState(From=WaitingForAssignedCI, To=DownloadingCIs) for Event=Transition CIAgent 17/09/2013 16:09:34 4076 (0x0FEC)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::QueueEvent - Queueing event and incrementing semaphore Transition CIAgent 17/09/2013 16:09:34 4076 (0x0FEC)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): QueueDebug - Executing Event. CIAgent 17/09/2013 16:09:34 4076 (0x0FEC)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::HandleEvent(Event=Transition, CurrentState=DownloadingCIs) CIAgent 17/09/2013 16:09:34 4080 (0x0FF0)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): Client requesting CIAgentJob context info for key: PostRebootDetect CIAgent 17/09/2013 16:09:34 4080 (0x0FF0)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): Started CIDownloadJob({5468E99C-9DBA-4463-9587-29D881EA38E3}) CIAgent 17/09/2013 16:09:35 4080 (0x0FF0)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): QueueDebug - Executing Event. CIAgent 17/09/2013 16:09:35 4080 (0x0FF0)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::QueueEvent - Queueing event and incrementing semaphore PersistCIs CIAgent 17/09/2013 16:09:43 4036 (0x0FC4)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::HandleEvent(Event=PersistCIs, CurrentState=DownloadingCIs) CIAgent 17/09/2013 16:09:43 4036 (0x0FC4)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): TransitionState(From=DownloadingCIs, To=PersistingCIModels) for Event=Transition CIAgent 17/09/2013 16:09:43 4036 (0x0FC4)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::Execute [GlobalSemaphore] Trying to aquire global semaphore CIAgent 17/09/2013 16:09:43 4036 (0x0FC4)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::Execute [GlobalSemaphore] Queued for global semaphore acquisition. CIAgent 17/09/2013 16:09:43 4036 (0x0FC4)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): GlobalJobEvent() called [GlobalSemaphore] CIAgent 17/09/2013 16:09:43 4080 (0x0FF0)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::Execute [GlobalSemaphore] Acquired global semaphore. CIAgent 17/09/2013 16:09:43 4080 (0x0FF0)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::HandleEvent(Event=Transition, CurrentState=PersistingCIModels) CIAgent 17/09/2013 16:09:43 4080 (0x0FF0)
CAgent::CreateJob - Creating new CI Agent Job for machine CIAgent 17/09/2013 16:09:44 3132 (0x0C3C)
CAgent::EvaluateCIs CIAgent 17/09/2013 16:09:44 3132 (0x0C3C)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): CAgentJob::QueueEvent - Queueing event and incrementing semaphore Transition CIAgent 17/09/2013 16:09:44 3132 (0x0C3C)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): CAgentJob::HandleEvent(Event=Transition, CurrentState=Init) CIAgent 17/09/2013 16:09:44 3132 (0x0C3C)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): Client requesting CIAgentJob context info for key: StateMessagePriority CIAgent 17/09/2013 16:09:44 3132 (0x0C3C)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): TransitionState(From=Init, To=WaitingForAssignedCI) for Event=Transition CIAgent 17/09/2013 16:09:44 3132 (0x0C3C)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): CAgentJob::QueueEvent - Queueing event and incrementing semaphore Transition CIAgent 17/09/2013 16:09:44 3132 (0x0C3C)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): QueueDebug - Executing Event. CIAgent 17/09/2013 16:09:44 3132 (0x0C3C)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): CAgentJob::HandleEvent(Event=Transition, CurrentState=WaitingForAssignedCI) CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): CAgentJob::QueueEvent - Queueing event and incrementing semaphore DownloadCIs CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): QueueDebug - Executing Event. CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): CAgentJob::HandleEvent(Event=DownloadCIs, CurrentState=WaitingForAssignedCI) CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): TransitionState(From=WaitingForAssignedCI, To=DownloadingCIs) for Event=Transition CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): CAgentJob::QueueEvent - Queueing event and incrementing semaphore Transition CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): QueueDebug - Executing Event. CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): CAgentJob::HandleEvent(Event=Transition, CurrentState=DownloadingCIs) CIAgent 17/09/2013 16:09:44 3132 (0x0C3C)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): Client requesting CIAgentJob context info for key: PostRebootDetect CIAgent 17/09/2013 16:09:44 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CI ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/Application_f9c9997b-8d3a-459e-accd-57ed8ac79bf6:17 (Office 2010 Pro Plus) targeted to (Dependant of policy CI ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6:17) is in scope for evaluation. CIAgent 17/09/2013 16:09:44 4080 (0x0FF0)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CI ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d:13 (Microsoft Office 2010 Pro Plus) targeted to (Dependant of policy CI ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6:17) is in scope for evaluation. CIAgent 17/09/2013 16:09:44 4080 (0x0FF0)
Failed to get the display name of the CI. Status messages will be based on the CI ID. CIAgent 17/09/2013 16:09:44 4080 (0x0FF0)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CI ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6:17 () targeted to (Dependant of policy CI ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6:17) is in scope for evaluation. CIAgent 17/09/2013 16:09:44 4080 (0x0FF0)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): TransitionState(From=PersistingCIModels, To=InvokingSdmMethod) for Event=Transition CIAgent 17/09/2013 16:09:44 4080 (0x0FF0)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): Started CIDownloadJob({5305BEEB-DDA8-4E92-98AC-76B14B9213B6}) CIAgent 17/09/2013 16:09:44 3132 (0x0C3C)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): QueueDebug - Executing Event. CIAgent 17/09/2013 16:09:44 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::QueueEvent - Queueing event and incrementing semaphore Transition CIAgent 17/09/2013 16:09:44 4080 (0x0FF0)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): QueueDebug - Executing Event. CIAgent 17/09/2013 16:09:44 4080 (0x0FF0)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::HandleEvent(Event=Transition, CurrentState=InvokingSdmMethod) CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): StartEnactment - CI - ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6 CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): StartEnactment - Attempting to invoke Policy Platform Client CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
Acquiring lock CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
DCM::LanternUtils::CreateBindingInstance - Creating binding document for Policy: ScopeId_A1EAE2D5_4D36_4E8F_BBB7_EF7ADC272A5E_Application_f9c9997b_8d3a_459e_accd_57ed8ac79bf6_17_Platform_PolicyDocument, Revision: 17. CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
DCM::LanternUtils::ScopeAndBindPolicies - [ScopedPolicies] ScopeId_A1EAE2D5_4D36_4E8F_BBB7_EF7ADC272A5E_Application_f9c9997b_8d3a_459e_accd_57ed8ac79bf6_17_Platform_PolicyDocument CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
DCM::LanternUtils::CreateBindingInstance - Creating binding document for Policy: ScopeId_A1EAE2D5_4D36_4E8F_BBB7_EF7ADC272A5E_Application_f9c9997b_8d3a_459e_accd_57ed8ac79bf6_17_Configuration_PolicyDocument, Revision: 17. CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
DCM::LanternUtils::ScopeAndBindPolicies - [ScopedPolicies] ScopeId_A1EAE2D5_4D36_4E8F_BBB7_EF7ADC272A5E_Application_f9c9997b_8d3a_459e_accd_57ed8ac79bf6_17_Configuration_PolicyDocument CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
DCM::LanternUtils::CreateBindingInstance - Creating binding document for Policy: ScopeId_A1EAE2D5_4D36_4E8F_BBB7_EF7ADC272A5E_DeploymentType_3bdc07d5_1d0b_4c3f_a17b_4f6dc45b0c4d_13_Discovery_PolicyDocument, Revision: 13. CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
DCM::LanternUtils::ScopeAndBindPolicies - [ScopedPolicies] ScopeId_A1EAE2D5_4D36_4E8F_BBB7_EF7ADC272A5E_DeploymentType_3bdc07d5_1d0b_4c3f_a17b_4f6dc45b0c4d_13_Discovery_PolicyDocument CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
DCM::LanternUtils::CreateBindingInstance - Creating binding document for Policy: ScopeId_A1EAE2D5_4D36_4E8F_BBB7_EF7ADC272A5E_DeploymentType_3bdc07d5_1d0b_4c3f_a17b_4f6dc45b0c4d_13_Requirements_PolicyDocument, Revision: 13. CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
DCM::LanternUtils::ScopeAndBindPolicies - [ScopedPolicies] ScopeId_A1EAE2D5_4D36_4E8F_BBB7_EF7ADC272A5E_DeploymentType_3bdc07d5_1d0b_4c3f_a17b_4f6dc45b0c4d_13_Requirements_PolicyDocument CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): CAgentJob::QueueEvent - Queueing event and incrementing semaphore PersistCIs CIAgent 17/09/2013 16:09:44 1404 (0x057C)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): CAgentJob::HandleEvent(Event=PersistCIs, CurrentState=DownloadingCIs) CIAgent 17/09/2013 16:09:44 4080 (0x0FF0)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): TransitionState(From=DownloadingCIs, To=PersistingCIModels) for Event=Transition CIAgent 17/09/2013 16:09:44 4080 (0x0FF0)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): CAgentJob::Execute [GlobalSemaphore] Trying to aquire global semaphore CIAgent 17/09/2013 16:09:44 4080 (0x0FF0)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): CAgentJob::Execute [GlobalSemaphore] Queued for global semaphore acquisition. CIAgent 17/09/2013 16:09:44 4080 (0x0FF0)
Lantern job:F9CAD339-56FE-477B-8C5B-215F67BE3AB1 succeeded. CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
Releasing lock CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): Invocation succeeded for policy platform job F9CAD339-56FE-477B-8C5B-215F67BE3AB1 CIAgent 17/09/2013 16:09:44 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): QueueDebug - Executing Event. CIAgent 17/09/2013 16:09:44 4036 (0x0FC4)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): ReportMethodInvocation :: Enactment succeeded CIAgent 17/09/2013 16:09:44 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): ReportMethodInvocation :: Obtained lantern reports CIAgent 17/09/2013 16:09:44 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}):State - Reporting (scan):: AppModel - ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/Application_f9c9997b-8d3a-459e-accd-57ed8ac79bf6:17 - State = NotInstalled ResolvedState = Available Applicability = Applicable ConfigureState= NotNeeded CIAgent 17/09/2013 16:09:45 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}):State - Reporting (scan):: Deployment Type - ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d:13 - State = NotInstalled ResolvedState = Available Applicability = Applicable ConfigureState= NotNeeded CIAgent 17/09/2013 16:09:45 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}):State - Reporting (scan):: Install Policy Type - ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6:17 - State = NonCompliant ResolvedState = Compliant Applicability = Applicable ConfigureState= NotNeeded CIAgent 17/09/2013 16:09:45 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::ReleaseGlobalSemaphore [GlobalSemaphore] Released global download semaphore CIAgent 17/09/2013 16:09:45 3132 (0x0C3C)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): GlobalJobEvent() called [GlobalSemaphore] CIAgent 17/09/2013 16:09:45 4036 (0x0FC4)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): CAgentJob::Execute [GlobalSemaphore] Acquired global semaphore. CIAgent 17/09/2013 16:09:45 4036 (0x0FC4)
CIAgentJob({8251BDAA-A7B6-4EC8-8807-E0EEA1650EF8}): CAgentJob::HandleEvent(Event=Transition, CurrentState=PersistingCIModels) CIAgent 17/09/2013 16:09:45 4036 (0x0FC4)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::QueueEvent - Queueing event and incrementing semaphore NotifyComplete CIAgent 17/09/2013 16:09:45 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::HandleEvent(Event=NotifyComplete, CurrentState=InvokingSdmMethod) CIAgent 17/09/2013 16:09:45 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): TransitionState(From=InvokingSdmMethod, To=CompletedSdmMethodInvocation) for Event=Transition CIAgent 17/09/2013 16:09:45 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::QueueEvent - Queueing event and incrementing semaphore Transition CIAgent 17/09/2013 16:09:45 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): QueueDebug - Executing Event. CIAgent 17/09/2013 16:09:45 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::HandleEvent(Event=Transition, CurrentState=CompletedSdmMethodInvocation) CIAgent 17/09/2013 16:09:45 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): TransitionState(From=CompletedSdmMethodInvocation, To=StateDownloadingContents) for Event=Transition CIAgent 17/09/2013 16:09:45 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::QueueEvent - Queueing event and incrementing semaphore Transition CIAgent 17/09/2013 16:09:45 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): QueueDebug - Executing Event. CIAgent 17/09/2013 16:09:45 3132 (0x0C3C)
CIAgentJob({B95D2613-0A5F-4738-B404-3470919D3F6E}): CAgentJob::HandleEvent(Event=Transition, Current
CITaskMgr.log
Initiating task ContentDownload for CI ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13 (Microsoft Office 2010 Pro Plus) for target: , consumer: {C6E3BB4D-852B-4240-9F36-2871DD7BAAB8} CITaskMgr 17/09/2013 16:09:45 4036 (0x0FC4)
Initiating content download : CITask(ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13..Install.ContentDownload) CITaskMgr 17/09/2013 16:09:46 4036 (0x0FC4)
State transition to (InProgress), Param(0) : CITask(ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13..Install.ContentDownload) CITaskMgr 17/09/2013 16:09:46 4036 (0x0FC4)
State transition to (InProgress), Param(0) : CTaskConsumer(ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13.{6273217C-1E91-44EE-9CF0-97628CD04706}) CITaskMgr 17/09/2013 16:09:46 4036 (0x0FC4)
Successfully initiated contents download request {00C794C9-CA03-4E1B-9440-73E09A1A12F9} : CITask(ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13..Install.ContentDownload) CITaskMgr 17/09/2013 16:09:46 4036 (0x0FC4)
Initiating task ContentDownload for CI ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13 (Microsoft Office 2010 Pro Plus) for target: , consumer: {A6CC1080-139B-4ED0-8DEB-04FBF8E2D613} CITaskMgr 17/09/2013 16:10:43 2168 (0x0878)
State transition to (Success), Param(0) : CITask(ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13..Install.ContentDownload) CITaskMgr 17/09/2013 16:13:30 3804 (0x0EDC)
State transition to (Success), Param(0) : CTaskConsumer(ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13.{6273217C-1E91-44EE-9CF0-97628CD04706}) CITaskMgr 17/09/2013 16:13:30 3804 (0x0EDC)
Release task ContentDownload for CI ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13 for target: , consumer {A6CC1080-139B-4ED0-8DEB-04FBF8E2D613} CITaskMgr 17/09/2013 16:13:30 412 (0x019C)
Release task ContentDownload for CI ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/Application_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 for target: , consumer {988A4382-4757-4C3C-B418-0A2B76B27224} CITaskMgr 17/09/2013 16:13:30 412 (0x019C)
Release task ContentDownload for CI ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 for target: , consumer {1B8A201C-758A-46DE-8BC3-813BB089180C} CITaskMgr 17/09/2013 16:13:30 412 (0x019C)
Initiating task Enforce for CI ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13 (Microsoft Office 2010 Pro Plus) for target: , consumer: {9D59DEFA-BF1A-455C-9B07-D5815CA8DE12} CITaskMgr 17/09/2013 16:13:30 3804 (0x0EDC)
Starting Enforcement : CITask(ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13..Install.Enforce) CITaskMgr 17/09/2013 16:13:30 3804 (0x0EDC)
Initiated application enforcement. : CITask(ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13..Install.Enforce) CITaskMgr 17/09/2013 16:13:30 3804 (0x0EDC)
State transition to (InProgress), Param(0) : CITask(ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13..Install.Enforce) CITaskMgr 17/09/2013 16:13:30 3804 (0x0EDC)
State transition to (InProgress), Param(0) : CTaskConsumer(ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13.{6273217C-1E91-44EE-9CF0-97628CD04706}) CITaskMgr 17/09/2013 16:13:30 3804 (0x0EDC)
Application enforcement completed : CITask(ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13..Install.Enforce) CITaskMgr 17/09/2013 16:28:59 3200 (0x0C80)
Enforcement completion state Success : CITask(ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13..Install.Enforce) CITaskMgr 17/09/2013 16:28:59 3200 (0x0C80)
State transition to (Success), Param(0) : CITask(ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13..Install.Enforce) CITaskMgr 17/09/2013 16:28:59 3200 (0x0C80)
State transition to (Success), Param(0) : CTaskConsumer(ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13.{6273217C-1E91-44EE-9CF0-97628CD04706}) CITaskMgr 17/09/2013 16:28:59 3200 (0x0C80)
Release task Enforce for CI ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/DeploymentType_3bdc07d5-1d0b-4c3f-a17b-4f6dc45b0c4d.13 for target: , consumer {9D59DEFA-BF1A-455C-9B07-D5815CA8DE12} CITaskMgr 17/09/2013 16:29:04 2572 (0x0A0C)
Release task Enforce for CI ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/Application_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 for target: , consumer {E9622739-EAFB-4C44-B582-EB0EECD0EF30} CITaskMgr 17/09/2013 16:29:04 2572 (0x0A0C)
Release task Enforce for CI ScopeId_A1EAE2D5-4D36-4E8F-BBB7-EF7ADC272A5E/RequiredApplication_f9c9997b-8d3a-459e-accd-57ed8ac79bf6.17 for target: , consumer {CD21FEE4-970C-4C68-B7FA-3C31EBF31E3C} CITaskMgr 17/09/2013 16:29:04 2572 (0x0A0C)
Maybe you are looking for
-
ITunes won't sync all of my songs to my iPhone 4S
When I sync to my iPhone 4S, it won't allow my to manually manage the music. The box can be checked, but other than that, nothing happens. On my phones music section, there are no options, other than voice memos, so I can't drag music to it. When I s
-
I've set 2 aliases in my iCloud Account and want to set a 3. one but it doesn't work
In my iCloud Account i have 2 Aliases transfered from Me.com. When i set up iCloud on my Mac i see one another alias that i had on Me.com, i can choose it as the despatcher adress but it is not listed as an alias in my ICloud.com Account. My Problems
-
Problem with OPERATION TEXT(LTXA1) uploading using BDC For C202 Transaction
Hi Experts, Im presently doing a BDC for the trransaction C202 (Change Master Recipe),my task was to upload the 'OPERATION TEXT' field PLPOD-LTXA1 which is actually Long text to an existing master recipe from a flat file during updation of the 'OPERA
-
Hi All, In 3.0.1 the images for a template are in the database in the /i/themes/opal (or whatever the template name is). I want to edit some of the images(slices) of my copy of a template using Fireworks. How can I accomplish this? Keep Smiling, Bob
-
THis has never happened to me before, where when I go to listen to a purchased song, it askes me to authenticate, so I do. Then it tells me that I have authenticates 3/5 computers, ok. Then it says this: There was an error storing you authorization i