Application folder slowed down after 10.6.5 upgrade

Hi,
im not too sure whether this software upgrade cause the problem. my application folder slowed down when i am scrolling. it will lag and not as smooth as previously.
any way to resolve this problem. hope to hear from you guys soon. thanks alot: )

Are you referring to the list view in the Applications folder while open in Finder?
Did you take the usual precautions before and repair permissions after the latest software update?
If not, go to Disk Utility and repair permissions first. Restart.
If problem persists, it could be a corrupt preference file; go to Users -> Library -> Preferences and trash this file: com.apple.Finder.plist. Restart and see if the issue is resolved.

Similar Messages

  • Slow down after my line was upgraded to ADSL2+

    Hi there
    a couple months ago BT upgraded our line from ADSL 1 to ADSL2+ now it all sounds good but I have experienced some major slow downs since they have done it and constant calls to CS have just resulted in my line getting tested and then having a different person phone back to give the results but just end up getting another line test done and it is starting to get very annoying.
    Before the upgrade I was downloading at around 8.1Mb/s, uploading at 1.1Mb/s and had a ping of around 15. Now it is this.
    Is there anything else i could do that could improve my speed?
    Thanks for reading my wall of text.
    P.S my line stats are:
    Connection information
    Line state
    Connected
    Connection time
    10 days, 6:53:35
    Downstream
    2,268 Kbps
    Upstream
    888 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.5
    Latency type
    Interleaved
    Noise margin (Down/Up)
    13.1 dB / 12.6 dB
    Line attenuation (Down/Up)
    21.5 dB / 9.5 dB
    Output power (Down/Up)
    0.0 dBm / 12.5 dBm
    Solved!
    Go to Solution.

    Hi there
    I am using BT home hub 2.0
    and the rest of my line stats
    Line state
    Connected
    Connection time
    10 days, 7:16:00
    Downstream
    2,268 Kbps
    Upstream
    888 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.5
    Latency type
    Interleaved
    Noise margin (Down/Up)
    13.1 dB / 12.5 dB
    Line attenuation (Down/Up)
    21.5 dB / 9.5 dB
    Output power (Down/Up)
    0.0 dBm / 12.5 dBm
    Loss of Framing (Local)
    0
    Loss of Signal (Local)
    0
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    898476782 / 0
    CRC Errors (Down/Up)
    202 / 2147480000
    HEC Errors (Down/Up)
    nil / 0
    Error Seconds (Local)
    143

  • Flex or AIR application is slowed down after continuous usage.

    Hello,
    I am facing two issues one each in Flex application and AIR application.
    1. First in Flex application.
    I have developed an Flex application in Flex 4.0 and is being used by around 10 to 15 users simultaneously.
    Now the problem is that when all the users start use of the application in the morning, it is running perfectly. But after usage of 3 or 4 hours, or let's say after lunch its speed is gettling slow. And due to low speed, application behaves abnormally. For example, I am calling multiple php files one by one through http service in one of the screens. And those php calls are dependent on each other. So due to low speed step 2 php call is over before the step 1 php call. And due to that application can't set the screen as per its normal behaviout.
    And this problem stays even after user clears the browser cache.
    So I am assuming that even after clearing browser cache flash player is not removing all the cache or something is still there on the server which is causing slow speed of the application. Because when next day users come to office and use the application they don't face such issues. Such issues are coming only after continuous usage of it.
    So please help me in solving this issue ASAP. Because our client is getting angry over this issue.
    2. AIR Application issue
    I have developed an AIR application which is using socket connection to use different designer softwares like In Design, Illustrator etc.
    Now sometimes happens that due to low speed of machine or internet my socket connection didn't get time to connect to some design softwares. So I have put a code that checks if the connection is lost then it reconnects it. But this connection lost problem starts coming after heavy usage of the application.
    And the second problem is regarding drag and drop. When I do continuous drag and drop of images of around 70 to 80 images, I get memory over error from the machine stating that please close the application as there is no memory available now.
    So please suggest a solution for this ASAP as our client will need to do lots of drag and drop operations and lots of socket connection to design software during the day.
    Thanks & Regards,
    Jigar Oza

    Here is the screen shot of my AIR application.
    When I do continuous drag and drop operation the highlighted VO or object instances are increased. These instances are increased and my system memory is used because of that. So how can I remove the instances of those objects which are used repeatedly?

  • System Slow-Down After Printing

    I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
    I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
    Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
    Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • System slow down after upgrade to 10.10.2

    Still have a slow down after updating to 10.10.2    
    Tried everything I can think of.
    Get spinning color wheel for a long time when opening even small files. Scrolling through folders, cursor hangs for a moment. opening and saving takes much longer.
    Used HD repair and repaired permissions and diagnosed HD.  No problems.
    Looking at Activity Monitor, I don't see anything that stand out-
    -C

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Compleat system slow down after current updates

    Has anyone learned why we all seem to have a compleat system slow down after the current set of updates? Everything works, but is VERY slow to respond. Even iTunes 7.1.1 plays video choppy now. Audio track plays fine however. Odd.
    -Apple //GS

    First of all, try repairing your permissions with Applications> Utilities> Disk Utility. Select the hard drive you're running off of and then click the Repair Permissions button.
    If that doesn't work I'd do an archive and install:
    http://docs.info.apple.com/article.html?artnum=107120
    Then run the combo update(s) instead of the consecutive ones. That seems to be working for a lot of people, but it will probably take a while.

  • System slow down after lion update 8/18/11

    Has anyone else had a problem with their system slowing down after downloading the system update for Lion on 8/18?  My system is not nearly as responsive and is only about two weeks old and have not installed any software other than Microsoft Office 2011 when I bought the machine.  Any ideas?

    Ok my system is booting and shutting down faster now.. This method worked for me:
    First, I repaired the permissions:
    1) Open up Disk Utility
    2) Select your hard drive
    3) Now select Repair Disk Permissions.
    Then, I deleted the caches folder:
    1) From the Finder's Go menu, select Go To Folder, and go to this folder: /Library
    2) Delete everything inside the Caches folder (This might require the Admin Username & Password)
    Finally, go to System Preferences and click on Startup Disc then click on your boot drive (In my case I've selected my HD labeled "Macintosh HD Mac OS X, 10.7.1". Now do a restart by clicking on the Restart button. If you don't have a Startup drive selected your mac will waste time at boot searching for a suitable boot drive !
    I Hope this works for you as well.
    Cheers!

  • Windows 8.1 gradually slows down after hours. Speed returns normal if restart "explorer.exe".

    I have Windows 8.1 Pro (x64) installed on Alienware M17x. The slowdown mostly appears as slow response in the situation such as open a folder/window, open/close/switch tabs in IE, drag window, and there's also cursor lag. It gradually
    slows down after system boot, noticeable after 3-4 hours, really slow after 8-9 hours.
    I have thought about many possible processes which can cause this issue, and then I found out that it's caused by "explorer.exe". If I kill "explorer.exe", the speed suddenly becomes normal. Then, I restart explorer.exe
    again, it stays normal, and then it still gradually slows down again after hours.
    I have checked driver or software compatibility. Also, CPU usage and Disk usage is normal.
    Please give some advises, reasoning, or solutions.

    SaccoSVD
    The process that is causing the problem is called sidebar.exe and I am curious why it is running on a win 8 machine as I dont believe it is built in. (It seems to have over 22,000 instances launched so I suspect either malware or a broken app)
    It is usually associated with a Vista machine, or updated win 7 machine.  Did you do do a clean install?  Have you run a malwarebytes scan?
    Please download the free version of Malwarebytes.
    Update it immediately.
    Do a full system scan
    Let us know the results at the end.
    http://www.malwarebytes.org/products
    Wanikiya and Dyami--Team Zigzag

  • Why does my data logging program slow down after a while?

    A data logging program created with Labview 5.1. Slows down after a few weeks and creates files in the Temp. directory.Computer is Siemens Scenic pro 124 MB ram and AT-MIO-16XE50 Data acquisition board. Also using Solartron Dig. probes and Fieldpoint units.

    Any chance that you are using Win 95/88/ME? Those OS's have well documented
    memory leaks which will consume all your available memory if an application
    is run long enough. Also there are some issues of memory management within
    LabView in the allocation of memory.
    The solution to the first is to switch to WinNT/2K. The second will be much
    more difficult.
    On Thu, 22 Feb 2001 03:19:12 -0800 (PST), Freek wrote:
    >A data logging program created with Labview 5.1. Slows down after a
    >few weeks and creates files in the Temp. directory.Computer is Siemens
    >Scenic pro 124 MB ram and AT-MIO-16XE50 Data acquisition board. Also
    >using Solartron Dig. probes and Fieldpoint units.
    ===========================================================================
    SolidW
    orks Research Partner National Instruments Alliance Member
    Christopher Dubea Phone: (504) 847-2280
    Vice President of Engineering Fax: (504) 847-2282
    Moving Parts L.L.C. email: [email protected]
    P. O. Box 6117 URL: http://www.movingpart.com
    Slidell, LA 70469-6117

  • Server slows down after a while

    Hi all,
    I've a problem with a linux machine which slows down after running for
    some days. It usually handles about 100 request per second and after a
    while it goes down to about 5 requests per second. I'm running WL6.1Sp1
    on Linux with JDK1.3.1 and "-hotspot -ms512m -mx512m". I'm wondering if
    this is related to some problem in my code or maybe rather is a database
    issue. I took a thread dump, and the server looks idle. Does anyone see
    something unusual in this dump? Does it indicate anything else than a
    nearly totally idle server?
    Thanks for your input!
    Daniel
    Full thread dump:
    "process forker" daemon prio=1 tid=0x82fe460 nid=0x5bf6 waiting on
    monitor [0xb75ff000..0xb75ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.UNIXProcessForker.run(Native Method)
         at java.lang.Thread.run(Thread.java:484)
    "process reaper" daemon prio=1 tid=0x82fdde0 nid=0x5bf5 runnable
    [0xb77ff000..0xb77ff8c0]
         at java.lang.UNIXProcessReaper.run(Native Method)
         at java.lang.Thread.run(Thread.java:484)
    "HighPriority TimeEventGenerator" daemon prio=1 tid=0x8148b98 nid=0x5ad6
    waiting on monitor [0xb79ff000..0xb79ff8c0]
         at java.lang.Object.wait(Native Method)
         at
    weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
         at
    weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
    java:138)
         at java.lang.Thread.run(Thread.java:484)
    "ListenThread" prio=1 tid=0x679c3c10 nid=0x5ad5 runnable
    [0xb7bff000..0xb7bff8c0]
         at java.net.PlainSocketImpl.socketAccept(Native Method)
         at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
         at java.net.ServerSocket.implAccept(ServerSocket.java:243)
         at java.net.ServerSocket.accept(ServerSocket.java:222)
         at weblogic.t3.srvr.ListenThread.run(ListenThread.java:255)
    "Thread-2" prio=1 tid=0x83a3b68 nid=0x5ad3 waiting on monitor
    [0xb7dff000..0xb7dff8c0]
         at java.lang.Object.wait(Native Method)
         at java.util.TimerThread.mainLoop(Timer.java:432)
         at java.util.TimerThread.run(Timer.java:385)
    "ExecuteThread: '0' for queue: 'JMS.TimerTreePool'" daemon prio=1
    tid=0x67680b10 nid=0x5ad2 waiting on monitor [0xb7fff000..0xb7fff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '3' for queue: 'JMS.TimerClientPool'" daemon prio=1
    tid=0x676809e8 nid=0x5ad1 waiting on monitor [0xb81ff000..0xb81ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '2' for queue: 'JMS.TimerClientPool'" daemon prio=1
    tid=0x65a8b358 nid=0x5ad0 waiting on monitor [0xb83ff000..0xb83ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '1' for queue: 'JMS.TimerClientPool'" daemon prio=1
    tid=0x65a873b0 nid=0x5acf waiting on monitor [0xb85ff000..0xb85ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '0' for queue: 'JMS.TimerClientPool'" daemon prio=1
    tid=0x65af9d88 nid=0x5ace waiting on monitor [0xb87ff000..0xb87ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '14' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x6764bfb8 nid=0x5acc waiting on monitor [0xb89ff000..0xb89ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '13' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x67951208 nid=0x5acb waiting on monitor [0xb8bff000..0xb8bff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '12' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x67667450 nid=0x5aca waiting on monitor [0xb8dff000..0xb8dff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '11' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x679819b0 nid=0x5ac9 waiting on monitor [0xb8fff000..0xb8fff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '10' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x6799ade8 nid=0x5ac8 waiting on monitor [0xb91ff000..0xb91ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '9' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x6765d0b8 nid=0x5ac7 waiting on monitor [0xb93ff000..0xb93ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '8' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x67903838 nid=0x5ac6 waiting on monitor [0xb95ff000..0xb95ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '7' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x676688a8 nid=0x5ac5 waiting on monitor [0xb97ff000..0xb97ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '6' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x676976e8 nid=0x5ac4 waiting on monitor [0xb99ff000..0xb99ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '5' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x65ada048 nid=0x5ac3 waiting on monitor [0xb9bff000..0xb9bff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '4' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x6766e550 nid=0x5ac2 waiting on monitor [0xb9dff000..0xb9dff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '3' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x67630ea8 nid=0x5ac1 waiting on monitor [0xb9fff000..0xb9fff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '2' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x65acf508 nid=0x5ac0 waiting on monitor [0xba1ff000..0xba1ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '1' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x65ada1e8 nid=0x5abf waiting on monitor [0xba3ff000..0xba3ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '0' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x676ed050 nid=0x5abe waiting on monitor [0xba5ff000..0xba5ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '2' for queue: 'weblogic.transaction.AsyncQueue'" daemon
    prio=1 tid=0x6762af98 nid=0x5abd waiting on monitor
    [0xba7ff000..0xba7ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '1' for queue: 'weblogic.transaction.AsyncQueue'" daemon
    prio=1 tid=0x676a0838 nid=0x5abc waiting on monitor
    [0xba9ff000..0xba9ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '0' for queue: 'weblogic.transaction.AsyncQueue'" daemon
    prio=1 tid=0x6765c0d8 nid=0x5abb waiting on monitor
    [0xbabff000..0xbabff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '9' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x65ab6bf8 nid=0x5aba waiting on monitor
    [0xbadff000..0xbadff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '8' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x676865f0 nid=0x5ab9 waiting on monitor
    [0xbafff000..0xbafff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '7' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x676dfcb0 nid=0x5ab8 waiting on monitor
    [0xbb1ff000..0xbb1ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '6' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x676120f0 nid=0x5ab7 waiting on monitor
    [0xbb3ff000..0xbb3ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '5' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x67611fb0 nid=0x5ab6 waiting on monitor
    [0xbb5ff000..0xbb5ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '4' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x67699720 nid=0x5ab5 waiting on monitor
    [0xbb7ff000..0xbb7ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '3' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x67926328 nid=0x5ab4 waiting on monitor
    [0xbb9ff000..0xbb9ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '2' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x6767e820 nid=0x5ab3 waiting on monitor
    [0xbbbff000..0xbbbff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x65ab61a0 nid=0x5ab2 waiting on monitor
    [0xbbdff000..0xbbdff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x676cff58 nid=0x5ab1 waiting on monitor
    [0xbbfff000..0xbbfff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'" daemon
    prio=1 tid=0x6765ff60 nid=0x5ab0 waiting on monitor
    [0xbc1ff000..0xbc1ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'" daemon
    prio=1 tid=0x6765f958 nid=0x5aaf waiting on monitor
    [0xbc3ff000..0xbc3ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "TimeEventGenerator" daemon prio=1 tid=0x676f3818 nid=0x5aae waiting on
    monitor [0xbc5ff000..0xbc5ff8c0]
         at java.lang.Object.wait(Native Method)
         at
    weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
         at
    weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
    java:138)
         at java.lang.Thread.run(Thread.java:484)
    "TimeEventGenerator" daemon prio=1 tid=0x676ffae8 nid=0x5aad waiting on
    monitor [0xbc7ff000..0xbc7ff8c0]
         at java.lang.Object.wait(Native Method)
         at
    weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
         at
    weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
    java:138)
         at java.lang.Thread.run(Thread.java:484)
    "SpinnerRandomSource" daemon prio=1 tid=0x67646dd8 nid=0x5aac waiting on
    monitor [0xbc9ff000..0xbc9ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.security.SpinnerRandomBitsSource.run(SpinnerRandomBitsSource.ja
    va:57)
         at java.lang.Thread.run(Thread.java:484)
    "ExecuteThread: '14' for queue: 'default'" daemon prio=1 tid=0x6767ff00
    nid=0x5aab runnable [0xbcbff000..0xbcbff8c0]
         at java.net.SocketInputStream.socketRead(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:86)
         at
    weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
         at
    weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
         at
    weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    "ExecuteThread: '13' for queue: 'default'" daemon prio=1 tid=0x67929c90
    nid=0x5aaa waiting on monitor [0xbcdff000..0xbcdff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '12' for queue: 'default'" daemon prio=1 tid=0x65aa0b58
    nid=0x5aa9 waiting on monitor [0xbcfff000..0xbcfff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '11' for queue: 'default'" daemon prio=1 tid=0x65a9ed80
    nid=0x5aa8 waiting on monitor [0xbd1ff000..0xbd1ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '10' for queue: 'default'" daemon prio=1 tid=0x679036d0
    nid=0x5aa7 runnable [0xbd3ff000..0xbd3ff8c0]
         at java.net.SocketInputStream.socketRead(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:86)
         at
    weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
         at
    weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
         at
    weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    "ExecuteThread: '9' for queue: 'default'" daemon prio=1 tid=0x6767fdc0
    nid=0x5aa6 waiting on monitor [0xbd5ff000..0xbd5ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '8' for queue: 'default'" daemon prio=1 tid=0x676680f8
    nid=0x5aa5 waiting on monitor [0xbd7ff000..0xbd7ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '7' for queue: 'default'" daemon prio=1 tid=0x676123e0
    nid=0x5aa4 waiting on monitor [0xbd9ff000..0xbd9ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '6' for queue: 'default'" daemon prio=1 tid=0x6766f658
    nid=0x5aa3 waiting on monitor [0xbdbff000..0xbdbff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '5' for queue: 'default'" daemon prio=1 tid=0x67647858
    nid=0x5aa2 waiting on monitor [0xbddff000..0xbddff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '4' for queue: 'default'" daemon prio=1 tid=0x67665970
    nid=0x5aa1 waiting on monitor [0xbdfff000..0xbdfff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '3' for queue: 'default'" daemon prio=1 tid=0x676426d8
    nid=0x5aa0 runnable [0xbe1ff000..0xbe1ff8c0]
         at java.net.SocketInputStream.socketRead(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:86)
         at
    weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
         at
    weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
         at
    weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    "ExecuteThread: '2' for queue: 'default'" daemon prio=1 tid=0x65afac38
    nid=0x5a9f runnable [0xbe3ff000..0xbe3ff8c0]
         at java.net.SocketInputStream.socketRead(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:86)
         at
    weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
         at
    weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
         at
    weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    "ExecuteThread: '1' for queue: 'default'" daemon prio=1 tid=0x65aa1088
    nid=0x5a9e waiting on monitor [0xbe5ff000..0xbe5ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '0' for queue: 'default'" daemon prio=1 tid=0x6765ef78
    nid=0x5a9d waiting on monitor [0xbe7ff000..0xbe7ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "Thread-0" daemon prio=1 tid=0x6764ced0 nid=0x5a9c waiting on monitor
    [0xbe9ff000..0xbe9ff8c0]
         at java.lang.Thread.sleep(Native Method)
         at
    weblogic.transaction.internal.TransactionManagerImpl$1.run(TransactionMa
    nagerImpl.java:1546)
         at java.lang.Thread.run(Thread.java:484)
    "Signal Dispatcher" daemon prio=1 tid=0x808d4b0 nid=0x5a9a waiting on
    monitor [0..0]
    "Finalizer" daemon prio=1 tid=0x8086ca0 nid=0x5a97 waiting on monitor
    [0xbf3ff000..0xbf3ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
         at
    java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
    "Reference Handler" daemon prio=1 tid=0x80851f8 nid=0x5a96 waiting on
    monitor [0xbf5ff000..0xbf5ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
    "main" prio=1 tid=0x804e750 nid=0x5a7c waiting on monitor
    [0xbfffd000..0xbfffd220]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:596)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
         at weblogic.Server.main(Server.java:35)
    "VM Thread" prio=1 tid=0x80821a8 nid=0x5a95 runnable
    "VM Periodic Task Thread" prio=1 tid=0x808c220 nid=0x5a98 waiting on
    monitor
    "Suspend Checker Thread" prio=1 tid=0x808cb68 nid=0x5a99 runnable

    There are several threads like the one below. I would think that they are the
    problem. But I don't know what they are doing - doesn't look like any application
    code.
    Mike
    "ExecuteThread: '2' for queue: 'default'" daemon prio=1 tid=0x65afac38 nid=0x5a9f
    runnable [0xbe3ff000..0xbe3ff8c0] at java.net.SocketInputStream.socketRead(Native
    Method) at java.net.SocketInputStream.read(SocketInputStream.java:86) at weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
    ) at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
    at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24) at
    weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    ============================================================
    Daniel Hoppe <[email protected]> wrote:
    Hi all,
    I've a problem with a linux machine which slows down after running for
    some days. It usually handles about 100 request per second and after
    a
    while it goes down to about 5 requests per second. I'm running WL6.1Sp1
    on Linux with JDK1.3.1 and "-hotspot -ms512m -mx512m". I'm wondering
    if
    this is related to some problem in my code or maybe rather is a database
    issue. I took a thread dump, and the server looks idle. Does anyone see
    something unusual in this dump? Does it indicate anything else than a
    nearly totally idle server?
    Thanks for your input!
    Daniel
    Full thread dump:
    "process forker" daemon prio=1 tid=0x82fe460 nid=0x5bf6 waiting on
    monitor [0xb75ff000..0xb75ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.UNIXProcessForker.run(Native Method)
         at java.lang.Thread.run(Thread.java:484)
    "process reaper" daemon prio=1 tid=0x82fdde0 nid=0x5bf5 runnable
    [0xb77ff000..0xb77ff8c0]
         at java.lang.UNIXProcessReaper.run(Native Method)
         at java.lang.Thread.run(Thread.java:484)
    "HighPriority TimeEventGenerator" daemon prio=1 tid=0x8148b98 nid=0x5ad6
    waiting on monitor [0xb79ff000..0xb79ff8c0]
         at java.lang.Object.wait(Native Method)
         at
    weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
         at
    weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
    java:138)
         at java.lang.Thread.run(Thread.java:484)
    "ListenThread" prio=1 tid=0x679c3c10 nid=0x5ad5 runnable
    [0xb7bff000..0xb7bff8c0]
         at java.net.PlainSocketImpl.socketAccept(Native Method)
         at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
         at java.net.ServerSocket.implAccept(ServerSocket.java:243)
         at java.net.ServerSocket.accept(ServerSocket.java:222)
         at weblogic.t3.srvr.ListenThread.run(ListenThread.java:255)
    "Thread-2" prio=1 tid=0x83a3b68 nid=0x5ad3 waiting on monitor
    [0xb7dff000..0xb7dff8c0]
         at java.lang.Object.wait(Native Method)
         at java.util.TimerThread.mainLoop(Timer.java:432)
         at java.util.TimerThread.run(Timer.java:385)
    "ExecuteThread: '0' for queue: 'JMS.TimerTreePool'" daemon prio=1
    tid=0x67680b10 nid=0x5ad2 waiting on monitor [0xb7fff000..0xb7fff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '3' for queue: 'JMS.TimerClientPool'" daemon prio=1
    tid=0x676809e8 nid=0x5ad1 waiting on monitor [0xb81ff000..0xb81ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '2' for queue: 'JMS.TimerClientPool'" daemon prio=1
    tid=0x65a8b358 nid=0x5ad0 waiting on monitor [0xb83ff000..0xb83ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '1' for queue: 'JMS.TimerClientPool'" daemon prio=1
    tid=0x65a873b0 nid=0x5acf waiting on monitor [0xb85ff000..0xb85ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '0' for queue: 'JMS.TimerClientPool'" daemon prio=1
    tid=0x65af9d88 nid=0x5ace waiting on monitor [0xb87ff000..0xb87ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '14' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x6764bfb8 nid=0x5acc waiting on monitor [0xb89ff000..0xb89ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '13' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x67951208 nid=0x5acb waiting on monitor [0xb8bff000..0xb8bff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '12' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x67667450 nid=0x5aca waiting on monitor [0xb8dff000..0xb8dff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '11' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x679819b0 nid=0x5ac9 waiting on monitor [0xb8fff000..0xb8fff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '10' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x6799ade8 nid=0x5ac8 waiting on monitor [0xb91ff000..0xb91ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '9' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x6765d0b8 nid=0x5ac7 waiting on monitor [0xb93ff000..0xb93ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '8' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x67903838 nid=0x5ac6 waiting on monitor [0xb95ff000..0xb95ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '7' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x676688a8 nid=0x5ac5 waiting on monitor [0xb97ff000..0xb97ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '6' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x676976e8 nid=0x5ac4 waiting on monitor [0xb99ff000..0xb99ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '5' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x65ada048 nid=0x5ac3 waiting on monitor [0xb9bff000..0xb9bff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '4' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x6766e550 nid=0x5ac2 waiting on monitor [0xb9dff000..0xb9dff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '3' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x67630ea8 nid=0x5ac1 waiting on monitor [0xb9fff000..0xb9fff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '2' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x65acf508 nid=0x5ac0 waiting on monitor [0xba1ff000..0xba1ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '1' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x65ada1e8 nid=0x5abf waiting on monitor [0xba3ff000..0xba3ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '0' for queue: 'JmsDispatcher'" daemon prio=1
    tid=0x676ed050 nid=0x5abe waiting on monitor [0xba5ff000..0xba5ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '2' for queue: 'weblogic.transaction.AsyncQueue'" daemon
    prio=1 tid=0x6762af98 nid=0x5abd waiting on monitor
    [0xba7ff000..0xba7ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '1' for queue: 'weblogic.transaction.AsyncQueue'" daemon
    prio=1 tid=0x676a0838 nid=0x5abc waiting on monitor
    [0xba9ff000..0xba9ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '0' for queue: 'weblogic.transaction.AsyncQueue'" daemon
    prio=1 tid=0x6765c0d8 nid=0x5abb waiting on monitor
    [0xbabff000..0xbabff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '9' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x65ab6bf8 nid=0x5aba waiting on monitor
    [0xbadff000..0xbadff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '8' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x676865f0 nid=0x5ab9 waiting on monitor
    [0xbafff000..0xbafff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '7' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x676dfcb0 nid=0x5ab8 waiting on monitor
    [0xbb1ff000..0xbb1ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '6' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x676120f0 nid=0x5ab7 waiting on monitor
    [0xbb3ff000..0xbb3ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '5' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x67611fb0 nid=0x5ab6 waiting on monitor
    [0xbb5ff000..0xbb5ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '4' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x67699720 nid=0x5ab5 waiting on monitor
    [0xbb7ff000..0xbb7ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '3' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x67926328 nid=0x5ab4 waiting on monitor
    [0xbb9ff000..0xbb9ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '2' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x6767e820 nid=0x5ab3 waiting on monitor
    [0xbbbff000..0xbbbff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x65ab61a0 nid=0x5ab2 waiting on monitor
    [0xbbdff000..0xbbdff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'" daemon
    prio=1 tid=0x676cff58 nid=0x5ab1 waiting on monitor
    [0xbbfff000..0xbbfff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'" daemon
    prio=1 tid=0x6765ff60 nid=0x5ab0 waiting on monitor
    [0xbc1ff000..0xbc1ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'" daemon
    prio=1 tid=0x6765f958 nid=0x5aaf waiting on monitor
    [0xbc3ff000..0xbc3ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "TimeEventGenerator" daemon prio=1 tid=0x676f3818 nid=0x5aae waiting
    on
    monitor [0xbc5ff000..0xbc5ff8c0]
         at java.lang.Object.wait(Native Method)
         at
    weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
         at
    weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
    java:138)
         at java.lang.Thread.run(Thread.java:484)
    "TimeEventGenerator" daemon prio=1 tid=0x676ffae8 nid=0x5aad waiting
    on
    monitor [0xbc7ff000..0xbc7ff8c0]
         at java.lang.Object.wait(Native Method)
         at
    weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
         at
    weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
    java:138)
         at java.lang.Thread.run(Thread.java:484)
    "SpinnerRandomSource" daemon prio=1 tid=0x67646dd8 nid=0x5aac waiting
    on
    monitor [0xbc9ff000..0xbc9ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.security.SpinnerRandomBitsSource.run(SpinnerRandomBitsSource.ja
    va:57)
         at java.lang.Thread.run(Thread.java:484)
    "ExecuteThread: '14' for queue: 'default'" daemon prio=1 tid=0x6767ff00
    nid=0x5aab runnable [0xbcbff000..0xbcbff8c0]
         at java.net.SocketInputStream.socketRead(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:86)
         at
    weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
         at
    weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
         at
    weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    "ExecuteThread: '13' for queue: 'default'" daemon prio=1 tid=0x67929c90
    nid=0x5aaa waiting on monitor [0xbcdff000..0xbcdff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '12' for queue: 'default'" daemon prio=1 tid=0x65aa0b58
    nid=0x5aa9 waiting on monitor [0xbcfff000..0xbcfff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '11' for queue: 'default'" daemon prio=1 tid=0x65a9ed80
    nid=0x5aa8 waiting on monitor [0xbd1ff000..0xbd1ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '10' for queue: 'default'" daemon prio=1 tid=0x679036d0
    nid=0x5aa7 runnable [0xbd3ff000..0xbd3ff8c0]
         at java.net.SocketInputStream.socketRead(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:86)
         at
    weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
         at
    weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
         at
    weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    "ExecuteThread: '9' for queue: 'default'" daemon prio=1 tid=0x6767fdc0
    nid=0x5aa6 waiting on monitor [0xbd5ff000..0xbd5ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '8' for queue: 'default'" daemon prio=1 tid=0x676680f8
    nid=0x5aa5 waiting on monitor [0xbd7ff000..0xbd7ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '7' for queue: 'default'" daemon prio=1 tid=0x676123e0
    nid=0x5aa4 waiting on monitor [0xbd9ff000..0xbd9ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '6' for queue: 'default'" daemon prio=1 tid=0x6766f658
    nid=0x5aa3 waiting on monitor [0xbdbff000..0xbdbff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '5' for queue: 'default'" daemon prio=1 tid=0x67647858
    nid=0x5aa2 waiting on monitor [0xbddff000..0xbddff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '4' for queue: 'default'" daemon prio=1 tid=0x67665970
    nid=0x5aa1 waiting on monitor [0xbdfff000..0xbdfff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '3' for queue: 'default'" daemon prio=1 tid=0x676426d8
    nid=0x5aa0 runnable [0xbe1ff000..0xbe1ff8c0]
         at java.net.SocketInputStream.socketRead(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:86)
         at
    weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
         at
    weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
         at
    weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    "ExecuteThread: '2' for queue: 'default'" daemon prio=1 tid=0x65afac38
    nid=0x5a9f runnable [0xbe3ff000..0xbe3ff8c0]
         at java.net.SocketInputStream.socketRead(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:86)
         at
    weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
         at
    weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
         at
    weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    "ExecuteThread: '1' for queue: 'default'" daemon prio=1 tid=0x65aa1088
    nid=0x5a9e waiting on monitor [0xbe5ff000..0xbe5ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "ExecuteThread: '0' for queue: 'default'" daemon prio=1 tid=0x6765ef78
    nid=0x5a9d waiting on monitor [0xbe7ff000..0xbe7ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    "Thread-0" daemon prio=1 tid=0x6764ced0 nid=0x5a9c waiting on monitor
    [0xbe9ff000..0xbe9ff8c0]
         at java.lang.Thread.sleep(Native Method)
         at
    weblogic.transaction.internal.TransactionManagerImpl$1.run(TransactionMa
    nagerImpl.java:1546)
         at java.lang.Thread.run(Thread.java:484)
    "Signal Dispatcher" daemon prio=1 tid=0x808d4b0 nid=0x5a9a waiting on
    monitor [0..0]
    "Finalizer" daemon prio=1 tid=0x8086ca0 nid=0x5a97 waiting on monitor
    [0xbf3ff000..0xbf3ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
         at
    java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
    "Reference Handler" daemon prio=1 tid=0x80851f8 nid=0x5a96 waiting on
    monitor [0xbf5ff000..0xbf5ff8c0]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at
    java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
    "main" prio=1 tid=0x804e750 nid=0x5a7c waiting on monitor
    [0xbfffd000..0xbfffd220]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:420)
         at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:596)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
         at weblogic.Server.main(Server.java:35)
    "VM Thread" prio=1 tid=0x80821a8 nid=0x5a95 runnable
    "VM Periodic Task Thread" prio=1 tid=0x808c220 nid=0x5a98 waiting on
    monitor
    "Suspend Checker Thread" prio=1 tid=0x808cb68 nid=0x5a99 runnable

  • Slow down after installing Lion OS

    My Macbook pro later than 2009 model slowed down after installing the new OS Lion
    any suggestions to speed it up

    First suggestion ,there have been a number of identical user questions like yours, in the Lion Community. If you want to talk to other MacBook Pro owners, try the forum they have.
    http://www.apple.com/support/macbookpro
    What you do not need is some gizmo to "speed up" or clean caches etc.
    Maybe you need to make more room on your hard drive, or add more RAM.
    For now, hold down Command-R and run Disk Utility to check the health of your system drive (Lion Recovery Mode)
    http://www.apple.com/support/lion

  • Has anyone noticed MacBook Air slowing down after installing Maverick

    Has anyone noticed MacBook Air slowing down after installing Maverick?

    Activity Monitor - Mavericks
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy

  • Lightroom workflow slows down after modifying an image

    Hi fellow users,
    Lightroom 4.3 runs smoothly if I work on unmodified images.
    However, if I apply modifications on an image, retouching it afterwards becomes much slower, even if I render a preview AFTER I made modifications on the image.
    I tell you an example: I import a raw file to the program and I render it`s preview. Then I retouch the image - it works very fast, no waiting time, no Loading overlay.
    Where the problem starts: I import a raw file, I apply some modifications on it (for example a preset), then I render it`s preview - then I want to do more modifications on the image, which becomes very slow.
    I was monitoring the cpu usage of the computer. In the first case, the cpu usage during modifying the image is normal.
    In the second case, it goes up to 100%.
    It seems that applying modifications on an image makes working on it slow, no matter if you have the most up-to-date preview or not.
    Anyone knows if it is normal or not?
    Is there any solution to this?
    Thanks,
    Tamas
    My configuration:
    Windows 7 64 bit (up to date)
    Lightroom 4.3 64 bit
    Fast PC
    lightroom settings:
    camera raw cache: 20gb
    video cache: 10gb

    First of all, you can forget about the preview rendering, that's irrelevant. Previews are only used by the Library module, not the Develop module. In Develop, it's handled by the ACR cache.
    Now, as for slowing down after initial adjustments, that's a variable I haven't looked out for. But it could well be correct (it would explain some weird results I got across two machines recently).
    In general, Lightroom 4 performs well below expected standards on some systems, while others fly along, and it seems nobody can explain why. Long story, do a search on this forum and you'll come up with several lengthy threads. The problem is that there are so many variables in this that it's almost impossible to even define what "slow" means. And now you've added another (interesting) one...

  • Illustrator begins to slow down after 10 to 15 minutes

    Illustrator begins to slow down after 10 to 15 minutes, my system exceeds the minimum requirements. What gives?
    Xeon Processor 3ghz
    20gigs of ram
    Win7 64bit
    200gigs of storage

    Sorry I forgot to mention that it's the Creative Cloud version.

  • Why do my loops slow down after many iterations

    My Vi seems to freeze up or slow down after several iterations of the loop. This is an Analog Input Capture VI.
    Attachments:
    Final_Main_VI_with_working_amp.vi ‏456 KB

    First of all, thank you for your contribution. You are right to say that I have no need in changing the AI Config every time that the loop runs. But as this is supposed to be a soft-scope, I need to be able to update the parameters associated with AI Start while the loop is running (e.g. trigger level).
    I have tried to move the AI Config subVI out of both loops but the error as a result is: "No transfer in progress for the specified source."
    I also need a sampling rate of exactly 96kHz. I realize that the laptop clock cannot attain this value. Do you know how I could get exactly 96kHz.
    Attachments:
    Final_Main_VI_with_working_amp.vi ‏498 KB

Maybe you are looking for

  • Mounting CD-ROM

    I'm having trouble mounting my cd rom. I'm running a small tablet, so this is an external disk drive connected via usb. I've tried editing fstab to allow a cdrom device, only to discover that doing so conflicted with udev. I can mount usb drives and

  • Why do I keep getting a message that says combining pdf files has encountered an error?

    Tried several times to get it done, but same message.  What gives?  I need to get these done now, not "later" like the message says.

  • Can't find my desktop.

    Migrated data from my Powerbook with Snow Leopard to my new iMac with Lion. I am the Admin and only user. But the desktop I see on the iMac doesn't show anything, not even hard disk icons. So where is the desktop with my stuff?

  • SAVE POSITIONS OF THE COMPONENTS!!! HELP!!!

    HI!!! I don't understand!!! I insert images in JLayeredPane, I move this images, BUT when i press a button (invoke ActioListener) the images become in initial position!!! HELP ME!!!!!!!

  • Lost to do items

    Can I use Time Machine to attempt to recover only my "to do's" which have suddenly gone missing from iCal? If so, how?