Application Frame Issue

The Application Frame window opens up too tall on both my monitors. I cannot resize it nor access any of the tools at the bottom. Is there any other way to resize it except by grabbing it with the cursor and dragging the edge, since obviously I cannot do that when it sits offscreen?

Does switching to another Workspace have any effect?
If you are on Mac what happens if you hit the green button top left?
If all else fails you could try trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed.

Similar Messages

Application frame not working plus other issues Illustrator CC Mac

Running Illustrator CC on a Mac. I'm missing the maximize, minimize, and close buttons in the top left corner. I have an "Ai" symbol in the top left, which I thought was only on the PC version? All my tools disappear when I turn on application frame. I deleted the preferences file, no luck. When I hold down command shift option during startup of Illustrator it says "error loading plugins"....Please help!

I am having this same issue. Should I just uninstall and reinstall? Or do they need to give me special instructions?

Application frame not working

Maybe i'm misunderstanding, but with the application frame checked i thought that when i moved my main image window either by the corner resizing method or dragging the title bar, the entire contents, including the palettes were supposed to move. However, on my mac, snow leopard, when the move the image around, the palettes stay where they are. They don't' move with everything else, just like when application frame is turned off. Please help. Thanks.

I am having this same issue. Should I just uninstall and reinstall? Or do they need to give me special instructions?

Adobe Photoshop CC 'Window-Application Frame' setting

So I've never been an adopter of the whole adobe application frame; I like the openness and abiltiy to click my desktop behind the image I'm working on. I know how to turn it off, but how do I KEEP it off? Every time I close and reopen photoshop it's back on, and I saved my workspace to see if that would result in any changes but it didn't. Didn't ever run into this issue on CS6.

Well I will say I had a TON of problems when I updated to CC. I went in and erased every ounce I could find of my adobe software from CS5 and 6 using both the uninstalls, cleaner, and manual removal, then reinstalled my OS and then installed CC. I did fix quite a few bugs by logging into my root account and setting my user account as read/write on everything in the Library, User, and Applications folder.
Might just have to do a full restart on my system. Copy, delete, act like I'm transferring to a new computer.
I've done several intensive command line checks on the drive in single user mode and everything checks out fine.
Sorry I failed to state earlier im on the most recent edition of Mountain Lion, though both posts are relevant.

Photoshop CS5.1 on 15" Macbook Pro (File opening/Application Frame problem)

I have seemed to narrow the problem to my preferences file but cannot figure out why.
I installed a clean, fresh version on my Mac. (No previous versions were ever installed).
When I open Photoshop for the first time, everything runs fine: I can open files and edit as usual.
As soon as I close it and re-open many things happen:
a) I can go to open a file, but with Window>Application Frame unchecked, I cannot see the open file.
b) All other palletes go awry. I cannot change the open palletes and or edit anything.
c) If I check Window>Application Frame, everything is back to normal. No problems here.
So, what is going on? Anyone else having this problem?

I get this same issue with PS CS5.1 a recently purchased 15" Macbook Pro
In PS5.1 use File/Open to open an image file but image doesn't appear (histogram and other properies dialogs show the right info, though),
switching to Application Frame mode makes the photo appear,
trying to switch back out of App Frame mode locks PS5 up (ie nothing displays & have to Quit and restart via the Dock icon).
For me this issue only happens when my secondary display in NOT connected. If the 2nd display is hooked up everything shows up normally. Doesn't seem to matter about the power profile (ie running on battery or not) and not affected by various background apps, devices hooked up (eg backup drive, USB mouse. All Mac & CS5.5 software updates have been applied to date.
System details:
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x64
Operating System: Mac OS 10.7.3
System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2400 MHz
Built-in memory: 8192 MB
Free memory: 4729 MB
Memory available to Photoshop: 7074 MB
Memory used by Photoshop: 70 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Crash File: Not Detected.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 ATI-7.18.11
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 6770M OpenGL Engine
Display: 2
Display Depth:= 32
Display Bounds:= top: 66, left: -1280, bottom: 786, right: 0
Video Renderer ID: 16915206
Video Card Memory: 1012 MB
OpenGL Version: 2.1 ATI-7.18.11
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 6770M OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 900, right: 1440
Video Renderer ID: 16915206
Video Card Memory: 1012 MB
Serial number: 95489709080731330826
Application folder: Macintosh HD:Applications:Adobe Photoshop CS5.1:
Photoshop scratch has async I/O enabled
Scratch volume(s):
Macintosh HD, 697.8G, 504.8G free
Primary Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS5.1:Plug-ins:
Additional Plug-ins folder: not set

Double arrow resize cursor of application frame extends over menu bar

Using Photoshop cs5 in application frame mode, when the cursor reaches any edge of the application frame it automatically turns into a double-arrow which when clicked and dragged will resize the application frame. (that is normal behavior). However, when the application frame is at the top of the screen against the menu bar, and then the cursor passes over the top edge of the application frame and onto the menu bar, that double arrow resizing cursor doesn't change back to the normal arrow cursor. Just very annoying to always see that double arrow when I'm trying to click any menu item on the menu bar.
I wonder if it's a photoshop issue or a mac issue, or if anyone else has noticed the same thing,
Working on a MacBook Pro 17" i7, 8gb ram in Photoshop CS5
Just tried doing the same thing in illustrator and it does not have that problem, everything works like it should - I move the cursor to the top and I don't even get that resize cursor at all (which is the way it should be since the top of the frame is against the menu bar there's no room to extend it upwards) so leads me to think it's a Photoshop issue.
Any feedback is appreciated.

I can confirm that this happens on my machine as well.
Current work around is to click an empty spot on OS X menu bar to reset cursor to normal before selecting a menu item. I have seen this behaviour since initial release of PS CS5 (all updates installed and behaviour still exists).
Illustrator CS5 does not display this behaviour on my machine either, so it would appear to be confined to Photoshop (I am assuming the mouse-over parameters for resize may be to blame, or lack of recognition of menu bar proximity).
Machine specs:
Mac Pro (early 2008) - 2.8 Ghz. Quad-Core
OS X (10.6.4) - fully updated
8 GB RAM (1 GB / slot)
nVidia 8800 GT video adapter
ACD 23" display
Logitech LX8 mouse (no software installed for mouse, generic OS X driver)
Note - Wacom Intous3 drivers installed (haven't tested behaviour with tablet pen yet, but tablet only plugged in and used for specific painting, not during displayed behaviour).
Default install for PS CS5 and AI CS5.
Issue displayed with or without any third-party plug-ins installed.
A fix would be good.

FAQ: UI - How can I change the color theme, size of the text, or turn off the application frame?

CHANGING THE INTERFACE COLOR SCHEME:
The Photoshop CS6 default interface is dark, but if you prefer the lighter interface you are used to from earlier versions,
you can change it back in the appearance area. There are 4 default color themes.
Mac Photoshop > Preferences > Interface
Windows Edit > Preferences > Interface
CONFIGURING LARGER FONTS:
For those who need larger fonts, you can also change the UI Font Size down in the type area.
Be sure to restart Photoshop to see the changes.
TURNING OFF THE APPLICATION FRAME
CS6 opens now by default in "Application Frame". You can go Window>Application Frame in the main meu and uncheck this

Select the title / text and then click on the "i" (inspector). A colored pin wheel shows up after you click on the square box directly below the font settings inside the inspector window. Then simply drag the dot to the color you want. Like this:
click here
Message was edited by: SDMacuser

Regarding Sun Java System Application Server Issue with JVM

Regarding Sun Java System Application Server Issue with JVM
Hi
I have installed SJSAS9.1 on solaris system. I m trying to deploy war file which i compiled in windows enviorment by jdk1.5.0_05. Every time i got the following error :
type Exception report
message
descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: PWC6033: Unable to compile class for JSP
PWC6199: Generated servlet error:
[javac] javac: invalid target release: 1.5
[javac] Usage: javac
[javac] where possible options include:
[javac] -g Generate all debugging info
[javac] -g:none Generate no debugging info
[javac] -g:{lines,vars,source} Generate only some debugging info
[javac] -nowarn Generate no warnings
[javac] -verbose Output messages about what the compiler is doing
[javac] -deprecation Output source locations where deprecated APIs are used
[javac] -classpath Specify where to find user class files
[javac] -sourcepath Specify where to find input source files
[javac] -bootclasspath Override location of bootstrap class files
[javac] -extdirs Override location of installed extensions
[javac] -d Specify where to place generated class files
[javac] -encoding Specify character encoding used by source files
[javac] -source Provide source compatibility with specified release
[javac] -target Generate class files for specific VM version
[javac] -help Print a synopsis of standard options
note The full stack traces of the exception and its root causes are available in the Sun Java System Application Server 9.1 logs.
I have cheked jvm version on both system the only difference is :
Solaris points to jdk 1.5.0_09
Windows point to jdk1.5.0_05
Even i tried to run blank jsp also but again i got the same error.
Can any help me to sort out the problem or give me any idea so i can do something by my own.
Thanks in Advance
Gagan

Do you have ANT installed and available?
Thanks,
Kedar

One application with Multiple schemas- common application frame work

Hi All,
I am trying setup a common application frame work in apex. Please help me.
How to achieve this.
Creation of one application attached to different schemas at run time. So that my application maintaince is going to be easy instated of creating copies of same application.
More details:
1. I have one application with 100 pages pointing to a schema dev_common in one workspace APP_COMMON. I have 50 schemas with same structure of dev_common schema with different set of data ( because of large amount of data).
So I want to create one application attached to different schemas.
2. And another thing is I have 100 users, the user can work on 1 or multiple schemas ( I mean same application with different schemas attached)
Any help much appreciated.
Thanks,

Thank you for the reply.
>> b) I think you have to give access rights for the dev_common and app_common to all users.
Dev_common schema is a kind of placeholder. I have 50 schemas same as dev_common because of different business requirements but the front end is same for all 50 schemas. How can we create one application used for 50 schemas instead of creating 50 applications and 50 workspaces.
Please help me.

How to contain all windows in Application Frame cs5 MAC

Hello,
This is my last resort to hopefully find a solotion to my problem.
Ive recently switched from PC to MAC, and since the switch I have had some trouble with photoshop (apparently its not the same?)
Now please bear with mem I have trouble explaining this properly hehe
Okay...
When I have two photos open in cs5 in tabs, If i drag one out of the tab and then click on the photo still tabbed the one that isnt tabbed disappears! Its floating in behind photoshop over my desktop. If I minimize photoshop, I can see the file floating there?
Is there any way to keep all files (windows) contained within the application frame itself, so they no longer "float" behind the photoshop application frame??
I hope this makes enough sense!
I never had trouble with windows floating outside of photoshop when I was using PC...

Hi,
Do you have the application frame in photoshop cs5 turned on or off?
Window>Appliction Frame
A check mark beside the word application frame means it's on.

Dropped frames issue on a G5 2.7DP w/DV footage

Let me first tell you my setup:
G5 2.7 DP
8 GB RAM
WiebeTech TrayDock eSATA 4-bay drive enclosure w/Sonnet 4+4 eSATA PCI Card
(2) 400 GB Seagate Barracudas in the enclosure RAIDed in a striped config using Apple's Disk Utility
10.4
FCP 5
At seemingly random times, playback from the timeline will stutter and stop, thus throwing up the dropped frames dialog box. If I re-play from the same point, it will normally play. This has happened on several current projects in which I'm working in DV. I've also worked on a project in 8bit uncompressed using my Kona LS card with the same drives, and had the same error.
I've had this issue ever since I setup this system--from the first install of FCP5 to the most recent update of 5.0.3, as well as from 10.4.2 to 10.4.3. I've tried turning off the internal Airport card in the G5, and quitting all other programs.
There is a little utility that came with the Kona card to test data rate of your drives. I'm getting well over 100 MB/s Read, and slightly less write rates, so it seems like drive speed isn't an issue.
What is the weak link here? WiebeTech was nice enough to send me a replacement eSATA PCI card, and the issue hasn't gone away, so it wasn't a bad card, although I guess there could be some flaw inherent in all of the cards.
What other steps should I take to try and isolate/solve this problem? This is kind of embarrasing that I can't play DV footage on the timeline without the possibility of dropping frames--even when working with only one layer of video.
I'm capturing video to the eSATA RAID, and my project files/graphics reside on an internal SATA drive in G5 (not the boot drive--I added another seagate 250 gb). Seems like there should be enough throughput in this thing to handle basic edits, but I'm beginning to have my doubts....
Your ideas?????

Clay,
Regarding your statement "My thinking initially about my workflow was to not keep them on the same drive as the footage because my feeling is that the RAID isn't as "safe" as the single 250 GB drive I have inside the G5".
I store all of my media, GFX and project files on whatever FW drive I happen to be using for a project. I NEVER have media for a specific project on two or more drives. For safety's sake, I ALWAYS have my Autosave Vault set to my internal drive, with a relatively high save rate (every 10 min). That way if the FW drive ever failed completely, I'd at least have a recent copy of the project file to work with (even if I have to redigitize the footage or redo the GFX). All I can say is keep all of your media (per project) on one drive - it's been kind of the Bible in this industry for years, and as far as I know it hasn't changed.
As far as RAID's go, I'm no expert. But if I remember correctly, back in my old Avid days we also used to avoid having the media on different striped partitions - something else you may want to try if you're media is spread across a few stripes.
It seems like I've run across more than a few posts here regarding the same problem happening on Dual 2.7's. You may want to do a more thorough search here to see what you come up with. All I can say is I'm running FCP 5.0.3 on a G5 Dual 2.0 with only 2.5 meg of RAM and have had no dropped frame issues.
Try Matt's suggestion of playing some footage off of your boot drive (NOT recommended for everyday use!). If it works then it's got to be a problem with your RAID and not FCP.
Good Luck!
jeff

How to overcome "dropped frame" issues on my project

Hey reader,
I have a MacBook Pro 2.4GHz with 250GB hd (85GB free just now) running 10.4.11, FCE HD 3.5 (and QT 7.5.5) and using a Sony Handycam DCR-HC96 (which is works BEAUTIFULLY with iMovie 08 and 6 and is always used with Sony tapes) and I am not able to "capture" the tape content to my MacBook Pro because of the "dropped frame" issue.
The camera is connected to the external hard drive chain via Firewire cable to the MacBook Pro and I was trying to capture to the internal hard drive. I am in the UK and am still struggling to get my head around the different frame rates but initially I got the dreaded "dropped frames were encountered during the last capture attempt" and it just wouldn't work, so I unselected the report dropped frames tab and abort capture in User Preferences as was suggested on here.
Now I get "Capture encountered a problem reading data on your source tape. This could be due to a problem with the tape. Capture has been aborted and your clip has been saved" but the tape is fine (heads are also clean) as I had to (under time pressure, me) use iMovieHD 6 instead and it worked like a CHARM.
What can I do to use this software?
I KNOW I can import the iMovie footage but the disadvantage is the eternal rendering, I guess. I only ever used it once (because of its difficulties) and that was for pre-existing footage from iMovie and it was OK if not perfect. Just had to have a few hours extra for the constant rendering in preview...
Should I try to capture to one of the external hard drives? I read that the internal might be a problem as it is busy with the operating system jobs.
Please and thank you.

I got some dropped frames last night and posted this before noticing your post:
There can be a number of reasons for getting dropped frames during capture.
Yesterday I videoed a relative's wedding (in HDV) and on getting home late I captured the footage into FCP 6.0.3 only to find in a couple of places I got an abort on dropped frames.
This morning I decided to recapture and did so without a single dropped frame.
Why ? ......... there are several possibilities.
It could be that there was some physical problem with the tape or camera heads but I believe it was most likely caused by my camera's power supply.
Last night I used the battery whilst this morning I plugged in the power connector.
I feel that this provided a more constant supply of full power and helped prevent frames from being dropped. (The fact I was using FCP is immaterial as the dropped frames would almost certainly have also occurred in FCE).
From now on I will always use the power connector during transfer to and from the camera.

Is there a keyboard shortcut to close the Application Frame in CS6 Mac? Mousing to menus or click on

Nothing works to close this window except mouse/clicking... I don't like it being in the background when I'm working in other apps.

I'm not a Mac user, so I don't have a way to check this myself, but what's the behavior when you do disable it via the setting, then open an image? Does the image just open a window exactly the size of the displayed image? I assume this is different than what you're looking to see. Maybe a couple of screenshots would help others reading this thread (e.g., Adobe folks) to understand how you'd prefer it to work.
I think the intent is to make the default Photoshop behavior the same on a Mac as on a PC, and on a PC there's no way to eliminate the Application Frame at all.
-Noel

Application Deloyment issue...

hi,
i am getting this Deployment error...
we got two servers one for developers at offshore and
one at the onsite...
the strange thing is that it is deploying n running fine on the offshore server.
but not getting deployed on the onsite server!!!
i have put the required references required and
checked them too...!!!
regards,
-Amol Gupta
Oct 18, 2007 11:11:04 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[004]Deployment aborted
Settings
SDM host : bp1xeuaa558
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/amolg/LOCALS1/Temp/temp26291bp.comexmplsupplier_lds_create_adobe.ear
Result
=> deployment aborted : file:/C:/DOCUME1/amolg/LOCALS1/Temp/temp26291bp.comexmplsupplier_lds_create_adobe.ear
Aborted: development component 'exmpl/supplier_lds_create_adobe'/'bp.com'/'LOKAL'/'0.2007.10.18.11.10.17'/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application bp.com/exmplsupplier_lds_create_adobe.. Reason: Clusterwide exception: Failed to deploy application bp.com/exmplsupplier_lds_create_adobe. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application bp.com/exmpl~supplier_lds_create_adobe. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : The deployment of at least one item aborted

>
I have oracle PL/SQL application performance issue. To open a screen populated with 7,000 records takes 5 minutes.
I have used SQL Analyze to get Index recomendation. Indexing did not help that much.Switch on a trace on a user who is just about to run that screen - let them rip.
Stop your trace. Get your trace file. Run it through TKProf.
Read the book by Cary Millsap that Sybrand recommends (or take a look
at Chris Lawson) - i.e. read up on trace files and looking at them.
Get the SQL that is run by the user and try running it from SQLPlus
on the server (no network or app issues) - set timing on.
That would be my approach.
Do you think upgrading or replacing with newer machine can improve performance? Getting a newer machine often satisfies the geek's primeval urge to
get his grubby little paws onto fancy shiny hardware - it may well
work for a while, however you're not tackling the underlying cause
of your problem, and it will (probably) reappear when the limits
of the new RAM/CPU have been hit.
If you what is suggested above, at least you'll be able to say
to your management - "well, if we get a new server, performance
will improve by this much, until we have (say) 14.000 records in
the table, when performance will go back to the way it was before".
Until you run a trace, you will have no idea if the problem will
scale linearly with the no. of records or how it will
behave into the future.
You cannon manage what you cannot measure.
Paul...
Taf

BI application frame -----------how to use it?

hi,
anybody help me that how to use BI application frame ui element in webdynpro java what are the properties i should fill,
Thanks,
santhosh.

Hi Santhosh,
I think the following link will lead you to solve your problem.
https://help.sap.com/javadocs/NW04S/current/wd/com/sap/tc/webdynpro/clientserver/uielib/bi/api/package-summary.html
Regards
Harish

Application Frame Issue

Similar Messages

Maybe you are looking for