Application freezes while running and returns to normal after execution

I deployed an application and it works fine.. but
once running and I click on a button Execute (does the work) the application freezes up until it finishes and then return to its normal screen
when i minimize it and maximize it while running just the border of the application pops up with nothing in the middle at the time it is running
how can i prevent it to freeze

how do i make it run on its own thread?
plz helplook into the Thread class, and search the forum for how to use threads.

Similar Messages

Labview is crashing (freezing) while running my app.

Running LV 7.1, the app just freezes while running at random points during execution. How can I purse some help with this?
Thanks,
Bill

Hi Bill,
It does sound like this crash is specific to that machine. I did find a few logs of similar crashes in our notes but there's no record of anyone being able to reproduce the error and hence solve it.
Do you have to use this machine for your application? Could you use the machine you know works?
It is likely that there was a problem with the initial installation of LabVIEW. If you do need to use this machine, I would recommend doing a complete uninstall and reinstall of all NI Software. The directions for this are in the attached word document and the MSI blast software you need is at the following link:
http://forums.ni.com/ni/board/message?board.id=250&message.id=12643&requireLogin=False
Message Edited by SarahB on 07-25-2006 11:22 AM
Sarah
Applications Engineer | National Instruments | UK & Ireland
Attachments:
Removing NI Software.doc ‏27 KB

When I try to use the clone stamp another layer of my picture is copied on the photo I'm working on. Is this a defect or is there a tool I can use to stop it and return to normal usage of the clone stamp?

When I try to use the clone stamp another layer of my picture is copied on the photo I'm working on. Is this a de@@@@fect or is there a tool I can use to stop it and return to normal usage of the clone stamp?

The "Sample Field" letters are very dim. After punching several times the right click revels "Clone stamp mode". The next little circle has a line through it and after several right clicks, it says: "turn on to ignore adjustment layers when cloning," Despite this I cannot get any kind of a response to change any of the existing entries. Bob
Robert Mcdonough
[email protected]

Iam Running an Application it is running and working fine in Firefox where as Chrome pushing an error stating "Object reference not set to an instance of an object."

Iam Running an Application it is running and working fine in Firefox where as Chrome pushing an error stating "Object reference not set to an instance of an object."

This forum is for discussing technical documentations on Microsoft's web site.
If you need help with an app, contact its author.
Visual C++ MVP

IPOD freezes while SYNCING - and then gets file error

Hello all,
i have a standard 40gb click wheel ipod, quite old, it works, but limited. The ipod just freezes while syncing now, it has been restored numerous times, but 2 not much avail, i can get one or two albums on there, then everytime i try and sync the ipod just freezes, and has to be reset. Every TIme i plug the ipod into my vista laptop it says, the says. SCAN AND FIX, ( because i couldnt get anything else to work i tried this ) and this is what vista told me
http://img155.imageshack.us/img155/9118/vistafixesipodlu5.png
i was like woah, so i proceded to restore the ipod then it seemed to work, for a day. then went back to the freezing while syncing, then next time i plugged in the ipod, windows said the disk needs to be formated before it could be used, so i tried that ( cos itunes was doing sweet **** ALL ) and windows couldnt format it, and neither cos HP USB FORMAT Tool. so i reset the ipod, plug it back into vista, and behold, SCAN AND FIX COMES UP, so i click it, it fixes it, but only loads 1 album before it freezes while syncing again, i have the screenshots,it took 11 screenshots, to get the FULL MESSAGE, that vista chkdsk gave me, there was thousands of these "BAD LINKS IN LOST CHAIN at CLUSTER XXXXX Corrected" messages
im currently listening to Three Days Grace on the ipod, works GREAT, except if i try and put more then this ONE album on it, it freezes while syncing, and gives me the unknown file error. SO any ideas if this ipod can be fixed, cos itunes cant do anything, im assuming there is physical unrepairable damage to the HDD of the ipod and will need replacing if this ipod wants to be in full working order again.
The ipod is NOT under warranty either, so does any1 know where in Australia, it be fitted with a new HDD? Thanks
kind Regards,
Hayden
Message was edited by: FittyyeN

your an idiot stardock, format doesnt work, fails to format -
stardockofthedead ( aussie css joke lol )

I sweated into my shuffle while running and then saw all of these posts. I'm surprised that Apple sold us something that was so fragile. A $50 lesson learned.

I sweated into my shuffle while running and it quit. I saw all of these other posts on the problem after the fact. Too bad Apple sells something that is so fragile when used for athletic reasons. I had used the free engraving feature and had "Keep running" engraved on it. How ironic! I'll write it off as a fifty dollar learning experience and run in silence for awhile.

Hi Seraphiel07.
I have a very similar issue. Hardware involved:
Apple MacMini (Mid 2011) - OSX 10.8.2. iTunes 10.7. Home Sharing enabled.
Apple TV (3rd Generation). Home Sharing (access) enabled.
Apple MacBook Pro (15" Mid-2009). OSX 10.8.2. iTunes 10.7. Home Sharing enabled.
Apple iPad 2 (Wifi only). iOS 6
Apple iPhone 4S. iOS 6
All connected through:
Apple Time Capsule 8.0211n (4th Gen)
I have an iTunes library on the MacBook Pro, shared over "Home Sharing" and another (duplicate content, different library name) iTunes library on my MacMini, which is also accessed through the Apple TV.
All software is current (as of Sep 26th).
All movies are iTunes purchases. 80 in total.
All files are purchased (and home shared) under one account.
My last two iTunes purchases both HD movies on 09/17/2012 and 09/05/2012 refuse to appear on any device accessing either of the two Libraries over Home Sharing. It should be noted that every other movie (the other 78) all show up and play correctly. I therefore know it is not an issue with connectivity, otherwise I would see zero movies available.
I have:
1. Removed all content from each Library and re-added
2. Upgraded the OS on the MacMini 10.8.2
3. Tested viewing the two missing movies on other Apple devices and no luck.
4. Turn home sharing on and off within iTunes and also on each device.
It would appear to me that the issue is with the files themselves, rather than the devices as different devices and different versions have been tested.
All comments welcome.

My iPad2 display is turning red, and reverting to normal after several re-starts. Please help!

My iPad2 display is turning red, and reverting to normal after several re-starts. Please help!

Best thing to do is leave it turned off and take it to your local apple store and ask advice there

Report "freeze" - while running through Appplication

Hi folks,
we have a report that runs fine through report builder and while running it through application except the one institute.
In that institute, where data amount is even not as large as in testing database (or in any other institute), report freeze after while. When I run that report in this database through report builder then it's quick and without any problem - so I think it's not database problem, but could be some setting on report's server.
We tried to extend cache size from original value 50. After increasing cache size in config file to 600 (in .../reports/conf folder rep_rerver.conf file <property name="cacheSize" value="600"/> ) report runs fine (there were no change in report on in testing data amount during all testing process) . Normal value that we have in other institutions (config files for other databases is 50 - where this amount is enough)
We don't want lo leave this value on 600, but at the moment we don't know what other parameters can have something to do with it.
Any ideas?
Thanks,
Tomas

Hi Sudhir,
Peoplesoft is an OEM Partner of ours and they support their product. We don't have it here so we can't help you.
Please contact PS for support and mark this post as answered.
Don

Windows: Intermittent Flash Pro CC Application Freeze while closing documents

If you notice any intermittent application Freeze of Flash Pro CC while closing the FLA documents, please apply the hotfix provided by Microsoft in the below link:
http://support.microsoft.com/kb/2619328/en-us
Issue is specific to Windows 64 bit Flash Pro CC installations.
Do let us know if you encounter this and if applying the hotfix fixes the issue for you.
thanks,
Sujai

Hi, I've been experiencing this problem. I followed the link you sent and it goes to a hotfix apparently designed to fix the issue "PowerPoint stops responding or crashes on a tablet computer that is running Windows 7 or Windows Server 2008 R2"
Is this the correct fix?

My Mac G4 came unplugged while running and now when I start it up all I get is a continuous reboot loop.

While sliding my Mac G4 tower out from under the desk it came unplugged. It was running at the time. After plugging it back in all I get is a continuous reboot loop. I have tried the Shift and the Command Option P R boots to no avail. What am I missing here? I have had no problems in the past with this system. I am running Panther.

I have tried the Shift and the Command Option P R boots to no avail.
Are you using an Apple keyboard or something else. It is rather common for non-Apple boards, especially those pulled from a PC, to not respond to the traditional Apple startup key command combos.
Take the computer off wall power again then press and hold the power button for about 20 seconds. Then restore power and try a normal start. That worked for me when I had a similar failure to start with my G4 MDD.
If you have never replaced the internal backup battery ("PRAM" battery) it is, by, now surely extremely dead and it could not preserve the needed start parameters when power was unexpectedly cut. If you get the computer going, consider installing a new PRAM battery so you won't replay today's issues. tomorrow. The batteries are cheap and replacing one is a three-minute at-home job:
NewerTech 3.6v Lithium 1/2 AA PRAM Computer Clock Battery

Entire computer freeze while running Safari in OS X Mavericks

I honestly can't recall the last time I've had a full "system freeze" on this or my two previous MacBook Pro laptops. But now it's happened twice in the past couple weeks, both times while running Safari and under OS X 10.9.2. This is the sort of freeze where the only thing I could get to function was the trackpad or bluetooth mouse. I could move the mouse around but couldn't click on anything. Nor could I request a Force Quit as none of the pulldowns worked, nor would <option><command> <esc> bring up any menu. I closed the lid but the computer wouldn't even go to sleep. My last resort was to hold down the power key until the machine shut down which worked. I restarted and it came up ok. I am about to go stare at the system log but haven't done so yet.
Might this be a Mavericks issue?? I am running the latest 10.9.2 and I've been running that for both of these recent events. Anyone seeing this??? Again both times it happened while Safari was up and running so I suppose it could be a Safari issue but I am most often on Safari anyway so it's a bit premature to blame Safari.
Any thoughts???
thanks... bob..

Bob,
I've had Mavericks on my MacBook Pro, a 2009 MacBook and an iMac since the day it was released and have installed updates up to and including 10.9.2 on the dates each update was released. Safari is my primary browser and I use it a lot. I have not experienced such a problem on any of the 3 computers. I have been very pleased with the performance of all 3 machines.
Since the problem is so random on your system, it will probably be difficult to diagnose. If you have not done so, possible a clean install from the Recovery Partition will fix the problem.
Joe

Macbook pro 2011 model, getting slow opening applications. freezes every now and again too. any ideas??

i have recently found that my macbook pro has been getting quite slow at opening applications. i also have countless pop-ups and advertisements on my internet browser and some applications freeze on my screen and i have to close the lid of my laptop and re-open to get it working again. My macbook was bought new last august so is not very old and i was wondering if anyone knew how to fix it?? should i take it into store?

Sounds like you got some form of malware. Not a virus per se, but something that is both impacting the running and launching the various popups.
Generally, you install these, knowingly or not. Be very wary of installing anything int he future.
For now, you need to either search them out, or get a program that can do it for you ( i am not familiar with them), or, worst case, backup, re-install system, copy only your files back. Destroy old backup and make new.
You might use the activity viewer to search for suspicious programs, then look for them, and remove them. But its hard.
Stay away form those sites and dont load stuff int he future.
Grant

IPhone freezing while running. Help??

Hi, my iPhone 4 keeps freezing when I use it while running. It only happens during/after running, and the music will still play but the touch does not work. I've been restarting it each time, but sometimes I have to restart it a couple times for it to work. How can I fix this?
Thank you!

Hi, I did the restart one more time to do everything in order, and now it won't start back up, I just get black screen. It's been about 1 1/2 hours now, it there a restart the restart?

Getting application exception while running a web application with UIX page

Hi All,
I am a new user to JDeveloper. I am practicing Struts and using UIX pages as interface. I did a simple application which is in oracle website. I am running the application using struts-config.xml file. I mea nrightclicking on one of Icon and choose run option. I am getting these below exception. Can any one tell what is the problem?
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\jdev1012\jdev\system10.1.2.2.0.1929\oc4j-config>
C:\jdev1012\jdk\bin\javaw.exe -ojvm -classpath C:\jdev1012\j2ee\home\oc4j.jar;C:\jdev1012\jdev\lib\jdev-oc4j.jar -Xverify:none -Ddisable.checkForUpdate=true -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doracle.dms.sensors=NONE -Doc4j.jms.usePersistenceLockFiles=false com.evermind.server.OC4JServer -config C:\jdev1012\jdev\system10.1.2.2.0.1929\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
07/11/22 13:12:06 Error instantiating application at file:/D:/Software/jdev1012/jdev/system10.1.2.2.0.1929/oc4j-config/applications/bc4j.ear: Unable to find/read assembly info for D:\Software\jdev1012\jdev\system10.1.2.2.0.1929\oc4j-config\applications\bc4j archive (IO Error: The system cannot find the path specified.
07/11/22 13:12:09 Auto-deploying file:/C:/jdev1012/jdev/mywork/HelloApplication/ViewController/public_html/ (New server version detected)...
07/11/22 13:12:32 java.net.ConnectException: Connection timed out: connect
07/11/22 13:12:32      at java.net.PlainSocketImpl.socketConnect(Native Method)
07/11/22 13:12:32      at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
07/11/22 13:12:32      at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
07/11/22 13:12:32      at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
07/11/22 13:12:32      at java.net.Socket.connect(Socket.java:452)
07/11/22 13:12:32      at java.net.Socket.connect(Socket.java:402)
07/11/22 13:12:32      at java.net.Socket.<init>(Socket.java:309)
07/11/22 13:12:32      at java.net.Socket.<init>(Socket.java:153)
07/11/22 13:12:32      at oracle.jdevimpl.runner.oc4j.Oc4jNotifier.sendMessage(Oc4jNotifier.java:98)
07/11/22 13:12:32      at oracle.jdevimpl.runner.oc4j.Oc4jNotifier.postInitApplicationServer(Oc4jNotifier.java:55)
07/11/22 13:12:32      at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1659)
07/11/22 13:12:32      at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:92)
07/11/22 13:12:32 Oracle Application Server Containers for J2EE 10g (10.1.2.2.0) initialized
07/11/22 13:12:32      at java.lang.Thread.run(Thread.java:534)
Message was edited by:
user606886
I think i did not given sufficient information. This exception is coming when i try to run the Icon in struts-config.xml file. Which will launch an internal server (which come with JDeveloper i did not configure any Tomcat or Oracle Application Server) that run the page.

Are you using correct Jdeveloper version ?
Refer http://oraclearea51.com/blog/setting-up-jdeveloper-download-correct-version-of-jdev-and-diagnosing-problems.html?blogger=contactriteshsharma
-Anand

IMac freezes while running Adrium

Hello,
I've bought my iMac 27inch i5 at the end of 2009. Right now I experience the issue as if I'm running Adrium on my Mac the HDD goes wild and most of my programs stop running and I only get the spinning rainbow
At the moment I turn of Adrium, everything goes smoothly for a while. I've already used the diagnostic for HDD and it says that there shouldn't be a problem.
I will make some more test, as stressing the HDD, but I would like to know if anyone else has an idea what my problem could be.
kind regards,
teddyofapril

Now I've got some update on my problem.
Today I didn't run Adrium a single time. But while running iWeb'09 I got the same problem. I've started to monitor my HDD via iStat Menubar. The activity bar shows, that my HDD stops working and won't be read or written. After a few seconds 10 to 60 the HDD shows activity again and I can work for some time.
Programs like Safari, Preview or Skype won't cause this problem.
Anyone an idea?

Application freezes while running and returns to normal after execution

Similar Messages

Maybe you are looking for