Application (Full Tilt/ical) Problems.

I had an installation error the other day and lost much of my information. I did a full recover and got most of it back. I reinstalled OS X on my system fresh, and then started pulling in the prefs from the archived version of my previous system.
Now my Full Tilt Poker application will not load any of the Image. However, it works just fine on a test user account. I have completely erased all prefs for the application and reinstalled it from the internet and still nothing. What could be the issue?
Also, my Ical will not even open!? What could be the problem here.
Any help would be much appreciated!?

You could try the following things I am not sure if they will do much but it may help:
PRAM Reset
http://support.apple.com/kb/HT1379
Disk Utility
http://docs.info.apple.com/article.html?artnum=302672
If these don't then remove your preferences folder to the desktop and restart. Open the application and see if it works. If it does then the next step if long winded but drag each preference in and see which one effects the application.

Similar Messages

HP Pavilion a6110n Startup Problems, Fan Runs Full Tilt and then Shuts Down

We are currently running into an issue where our computer, when we try to power it on, turns on briefly with the fan running at full tilt. After a few seconds, the computer then shuts down and everything turns off. When the monitor is connected, we never do see anything show up there. We opened up the case and cleaned out the fan and the cooling unit completely, and then we even completely removed and then reconnected the unit. Still, the computer continues to do the same thing. Does this sound like a bad sensor? Like the computer thinks it is overheating and just shuts itself down?
Thanks for any help. We tried some of the advice we found on here, like stated above, and seem to have run out of options.

Hi Big_Mike_180,
It is the same for the desktop or notebook. The one blink means that you are having an issue with the CPU, unfortunately. At this point if you are in warranty give HP Total Care a call at 1-800-474-6836 in North America or visit the link below if you are outside North America.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Or take it to a local tech to check the CPU.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Quicktime 7.1.5 disables Full Tilt Poker

Anybody know a fix for this? Is there a way to get quicktime off my computer? I understand it also screws up Turbo Tax, but I personally think Full Tilt Poker trumps Turbo Tax, to mix my metaphors.

I did an archive and install. This was the only way I found to be able to go back to quicktime 7.1.3. It did take some time to update the software, ie: all the updates that apple sends including from 10.3.3 to 10.3.9 for the operating system. I only did quicktime up to 7.1.3. It did work and I can now play on full tilt poker and I'm sure it would also fix the problem with turbo tax.

I can't remove full tilt poker from my mac. Can you help?

I installed Full Tilt Poker on my mac. I don't really like it and want to delete the program. When I drag it to the trash, it pops out. Any suggestions?

Don't drag the Dock icon to the Trash. Quit the app and drag it from the Applications folder to the Trash.

About Full Tilt Poker

Hello, I have a question. I have on my macbook full tilt poker installed and it worked fine until now....now it started to block every time that I want to log in and I can't do anything to work on it. I also have to force quite the program. I did uninstall it and install it again and it has the same problem.
Can someone help me with that? What can it be the problem?
Thank you.

This is a forum about Apple products; you might have better luck asking for help in a Full Tilt Poker forum.
That said, see if deleting the preferences for FTP helps. It would be something like com.fulltiltpoker.plist in your /Library folder. The next time you open FTP, you would need to re-enter your information, but it might work.

When I'm using Safari, acasionally the menu bar just disappears. I'm running the latest version of Lion and the latest version of Safari. This is not a full screen app problem. I have multiple windows open. This happens all the time! Firefox is fine! ???

When I'm using Safari, ocasionally the menu bar just disappears. I'm running the latest version of Lion and the latest version of Safari. This is not a full screen app problem. I have multiple windows open. This happens all the time! Firefox is fine! What the ****? Please help!

Right, like I'm trying to say, THERE IS NO SAFARI MENU bar. Example: I have multiple applications open, I click on a Photoshop window, the correct menu or title bar or whatever changes. Every other application window I click on brings up the correct "whatever" bar. If I click on the desktop, the "Finder Bar" shows up.
Everythiing else, BUT SAFARI, works the same way since OS X came out. This is ridiculous.
I'm getting the vibe that Apple is trying to get rid of the finder.... this is the way wrong direction.

I am now getting an error message from Elementsautoanalyzer.exe, extendscript.dll not found. reinstalling the application may fix this problem. is there a fix for this?

I am now getting an error message from Elementsautoanalyzer.exe, extendscript.dll not found. reinstalling the application may fix this problem. is there a fix for this?

TomCT60,
Is your MacBook using Mac OS X 10.6.8 as indicated in your post? If so you will not be able to fully integrate with iCloud.
iCloud and Snow Leopard, by Roger Wilmut describes what iCloud options are available for Snow Leopard.
If you are using Lion, go to iCal>Preferences...>Accounts, and delete/re-add your iCloud CalDAV server.

Full Tilt Poker client hangs on launch

Anyone else had this problem or found a solution? Worked fine with Leopard. Tried re-installing the app. Also deleted the preferences in my Library folder and re-started. Thanks.

Yes, I'm having the same problem. Full Tilt stopped working after Snow Leopard installation. I raised the issue with Full Tilt support, and after 7 days, they finally replied by saying it must not be a problem because they could see that I'd logged into my account (I had in fact logged in using an older machine, an eMac G4, after several days of inactivity). I tried re-installing Full Tilt software & upgrading to 10.6.1 without success.
It sounds like the problem is specific to certain machines or configurations. Someone on the Full Tilt message boards claims that 3 out of 4 of his Macs upgraded successfully, and that the one Full Tilt-incompatible machine is his older one. My machine, though, is brand new, like vrogers above. If anyone finds a solution, please advise. Thanks!

JBOSS 4.0 Application Server start up problem?

1. JBOSS Application Server start up problem?
I have installed the JBOSS 4.0 application server in eclipse 3.4(Ganymede) in order to work with the adempiere open source ERP.When I start the JBOSS server,It displays the message “Server started in Xm:XXs:XXXms” in the console window.But the progress bar in server window is still running.Once the time out is over,it displays the message server cannot be started.
What should I do in order to make eclipse know that the server is started(message in console as server started) and set its status to “Started”?
2.Is it possible to copy and paste the .war created in eclipse 3.4 using JBOSS 4.0 to Glassfish v2 which requires archive file .ear form in NetBeans IDE 6.1?

i also noticed when I start the server some times the first line it display in the container will be starting Microcontainer some times it diaplays microkernel?You can find out reason based on that also?
Actually I was using 8080 port for my Oracle 10g Express Edition.Even when I change the port in server view,I had same problem.In order to recover from the problem,I finally changed my database port,My Jboss 4.0 has started succesfully. When I access the JBOSS in URL http://localhost:8080/jmx-console,i got the error can you tell me what can i do?
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:97)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:346)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:414)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:75)
root cause
Unable to find a javac compiler;
com.sun.tools.javac.Main is not on the classpath.
Perhaps JAVA_HOME does not point to the JDK
     org.apache.tools.ant.taskdefs.compilers.CompilerAdapterFactory.getCompiler(CompilerAdapterFactory.java:105)
     org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:929)
     org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:758)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:382)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:75)
note The full stack trace of the root cause is available in the Apache Tomcat/5.0.28 logs.
Apache Tomcat/5.0.28

InterVideo WinDVR Application has encountered a problem and needs to close.

My TV Anywhere has suddenly stopoed working and the message "InterVideo WinDVR Application has encountered a problem and needs to close. We are sorry for the inconvenience." appears each time I try to open the program. MSI Radio works fine. I have uninstalled and re-installed the programe (originally MSIPVS now MSIPVS3). I did try to download the new Beta drivers just to try, but the zip file shows 0 bytes!
Has anyone come across this, or can anyone suggest what I can try to resolve the issue?
Many thanks in anticipation
Gareth

Jeremy:
I should point out that I am much more confident with software issues. I am not a hardware person and have never attempted to open up the box!
Realtek is the card on the motherboard.
I hope this is the information required:
OS Information:
Property   Value
OS Name     Microsoft Windows XP Professional|C:\WINDOWS|\Device\Harddisk0\Partition1
Service Pack     2.0
OS Manufacturer     Microsoft Corporation
Windows Directory     C:\WINDOWS
Processor:
Property   Value
Current Clock Speed     3000
Description     x86 Family 15 Model 2 Stepping 9
Manufacturer     GenuineIntel
Name     Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory (RAM):
Property   Value
Bank Label     RAS 0 & 1
Capacity     536870912
Bank Label     RAS 2 & 3
Capacity     536870912
Total Memory Deteced in Hardware: ~1024 MB
Memory Reported to Operating System: 1023MB
Disk Drives:
Property   Value
Description     Disk drive
Manufacturer     (Standard disk drives)
Model     Maxtor 6Y160M0
Media Type     Fixed hard disk media
Size     163921605120 (~153 GB)
Number of Partitions     2
Description     Disk drive
Manufacturer     (Standard disk drives)
Model     Canon MP Memory Card USB Device
Media Type
Number of Partitions
Description     Disk drive
Manufacturer     (Standard disk drives)
Model     IC35L060 AVV207-0 USB Device
Media Type     Fixed hard disk media
Size     61492193280 (~57 GB)
Number of Partitions     1
Installed Printers:
Property   Value
Name     PaperPort Color Image
Port Name     BIPORT
Default     False
Driver Name     PaperPort Color Printer Driver
Name     PaperPort Black & White Image
Port Name     BIPORT
Default     False
Driver Name     PaperPort Mono Printer Driver
Name     Microsoft Office Document Image Writer
Port Name     Microsoft Document Imaging Writer Port:
Default     False
Driver Name     Microsoft Office Document Image Writer Driver
Name     Generic / Text Only
Port Name     LPT1:
Default     False
Driver Name     Generic / Text Only
Name     Canon MP370 Series Printer
Port Name     USB001
Default     True
Driver Name     Canon MP370 Series Printer
Name     Auto Microsoft Office Document Image Writer on GARETH-14ETIB74
Port Name     \\GARETH-14ETIB74\Printer
Default     False
Driver Name     Microsoft Office Document Image Writer Driver
Motherboard:
Property   Value
Manufacturer     MICRO-STAR INC.
Model
Name     Base Board
Part Number
Product     MS-6758
Serial Number     00000000
Version     2.00
BIOS:
Property   Value
Manufacturer     American Megatrends Inc.
Name     Version 1.00
Release Date     20040324000000.000000+000
Version     AMIINT - 10
Monitor:
Property   Value
Description     SyncMaster 173V/172V/173S/173B
Name     SyncMaster 173V/172V/173S/173B
Screen Height     768
Screen Width     1024
Keyboard:
Property   Value
Description     Easy Internet Keyboard
Pointing Device:
Property   Value
Manufacturer     Logitech
Name     HID-compliant Wheel Mouse
Sound Card:
Property   Value
Manufacturer     Creative Technology, Ltd.
Description     Creative EMU10K1 Audio Processor (WDM)
Device ID     PCI\VEN_1102&DEV_0002&SUBSYS_80661102&REV_0A\4&1F7DBC9F&0&08F0
Manufacturer     Realtek
Description     Realtek AC'97 Audio
Device ID     PCI\VEN_8086&DEV_24D5&SUBSYS_75851462&REV_02\3&13C0B0C5&0&FD
Video Card:
Property   Value
Adapter Compatibility     NVIDIA
Adapter RAM     268435456
Description     NVIDIA GeForce FX 5600XT
Installed Display Drivers     nv4_disp.dll
Driver Version     6.14.10.6693
Driver Date     29/10/2004 16:50:00
Video Mode Description     1024 x 768 x 4294967296 colors
DirectX Installation:
Property   Value
Version     6.03.01.0146
Modem:
Property   Value
Network Adapters:
Property   Value
Description     Intel(R) PRO/1000 CT Network Connection - Packet Scheduler Miniport
Description     Packet Scheduler Miniport
Description     Microsoft TV/Video Connection
Description     1394 Net Adapter
Description     1394 Net Adapter
External Ports:
Property   Value
External Reference Designator     Def
External Reference Designator     Sanjoy
Expansion Slots:
Property   Value
Slot Designation     PCI1
Slot Designation     PCI2
Slot Designation     PCI3
Slot Designation     PCI4
Slot Designation     PCI5
Slot Designation     AGP
Copy To Clipboard
I do very much appreciate the help from you all!
Gareth

HT1926 My itunes won't open because it says "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem" Can someone help? I don't want to delete it altogether due to needing the phone backup

I was given notification to upload the latest version of itunes recently, so I clicked installed. However it has since corrupted my itunes and I get the error message:
"This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem".
In poor timing, I have also accidently damaged my phone and have a new one to restore it to an old back up.
It is because of this I am reluctant to completely delete itunes off my computer and start again for fear of losing my back ups.
Is there another way to fix iTunes so I can open it again?
Thanks

Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!!

This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.

I recently tried to download the latest version of iTunes, but an error occured during the process. It was recommended that i reinstall iTunes to attempt to correct that problem. After I attempted to reinstall, an error came up with the title "iTunes.exe - Unable to locate component." the body of the error message read "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." When I click "Ok", another error message pops-up reading "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)". I tried reinstalling iTunes 3 times now, each time with the same result. What is going wrong, and what do I need to do?

Kappy, I completely overlooked your original response due to it's small, one line nature and poor UX design of the area surrounding the message area.
Upon following the complete instructions linked from the link you posted (http://support.apple.com/kb/HT1923?viewlocale=en_US&locale=en_US), my first attempt resulted in everything being installed except for iTunes. So trying yet again.
I do have Safari for Windows Vista installed, which is why I could not delete everything in the C:\Program Files\Common Files\Apple\ folder. I'm guessing this is Apple's way of completely removing Safari Win from history (there's always an under-the-table reason when something like this happens with Apple installs, they just won't say it publicly). Uninstalling Safari. Uninstalling Safari removes the remaining "Internet" files from C:\Program Files\Common Files\Apple\
Uninstalling iCloud. Uninstalling MobileMe Control Panel that was never used. That leaves only QuickTime installed as an Apple product on my machine.
Just for the record, I did not have this folder: C:\Program Files\iPod\
Emptied the Recycling Bin.
Shut down and fresh start-up.
Install attempt again: results in the installer saying something interrupted it (no other programs open)
Installing again immediately after error: Success
Clearly there are issues with this installer.
A pop-up shows up with "The registry settings used by the iTunes drives for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burining software. Please reinstall iTunes"
No other CD burning software installed other than what came pre-installed by Gateway and a install of Windows Vista Pro (or whatever the top expensive one was called).
iTunes launched. iTunes Library, items like Movies & Music, and playlists are still intact and usable.
Good thing I don't have these issues on my Macs (ahem, which is why these errors are allowed to persist by Apple to discourage Microsoft/Windows/PC use and purchase, all about the money and Apple has become the non-caring giant it once sought to overthrow as the underdog, miss those days).
Thanks Kappy. Thanks for the time suck Apple.

HT1926 I try to download Itunes and when i am done it i tried to open it and it said "This application has failed to start because MSVCR80.dll was not found. re-installing the application may fix this problem"

i tried to open itunes and it said "This application has failed to start because MSVCR80.dll was not found. re-installing the application may fix this problem" and "itunes was not installed correctly. please reinstall itunes. Error 7 (windows error 126)" what does this mean and how do I fix it? I reinstalled itunes and this just popped up again :C

See Troubleshooting issues with iTunes for Windows updates.
tt2

Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I have re-installed, SO many times and I still cant open iTunes.

Hi Support,
I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
I have re-installed, SO many times and I still cant open iTunes.
Please help!!

Click here and follow the instructions.
(98888)

Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

Application (Full Tilt/ical) Problems.

Similar Messages

Maybe you are looking for