Application Help in IR and ID

Hi Everyone... I am Varun, an XI Consultant.
 Would anyone help me in resolving this issue.
 I want to ENABLE Application Help TAB in HELP Menu where we have in Integration Repository and Integration Directory screens.
 I Would appreciate if anyone would me in this regard.
Regards,
Varun Reddy.K

Thanks, Jaime Farinos for you reply and that helped me alot..
Now i could successfully get enable the APPLICATION HELP tab in the Help Menu in Integration Repository and Integration Directory.
As you suggested me to implement note 839880 and i did the same
As i gave the url as http://help.sap.com/saphelp_nw2004s/helpdata in com.sap.aii.docu.url and it worked well but which ever object i select in IR/ID only the above url is getting enabled because i gave that url as default.
Now what i need is for example if i select Mapping Obects in Integration Repository or for example Sender Agreement in Integration Directory and when i press Application Help tab in Help Menu, then that correspoinding url of (Mapping Obects or Sender Agreement ) of help.sap.com page should get opened respectively and so on.
Hope you got my point.
Please help me in this issue.
Regards,
Varun Reddy Kasireddy.

Similar Messages

I am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

i am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

Notes:
1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

HT1926 hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll.

After installing the 64 bit version of itunes my iphone still won't sync. I get the explantation that I mobile driver application did not download and i need to remove and reinstall itunes (which I have done numberous times). Any help?

After installing the 64 bit version of itunes my iphone still won't sync. I get the explantation that I mobile driver application did not download and i need to remove and reinstall itunes (which I have done numberous times). Any help?

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

Choice between UPK in-application help and standard EBS help

Hi,
We are on a EBS 11.5.10 project, implementing UPK.
We got UPK in-application help working; changed custom.pll, set the profile option, everything fine.
Now we would like the users to have the choice between UPK help (default) and standard EBS help.
Therefore we opened the In-Application Support Player Configuration, and created a new Tab:
Type: Oracle E-Business Suite help
Tab Text: EBS help
URL: ?
Whatever we put in the URL, it won’t display the standard EBS context sensitive help. We can see the ‘EBS help’ tab when selecting ‘window help’ in the application but the page is blank or shows an error message.
Do you have any tips on how to get this working?
Thanks,
Abe de Beer
EBS Financials consultant
Oracle Belgium

Hi,
I have the exact same requirtment, Could you please give the step what you have done so that it would be helpfull. Also after publishing the content on the i am not seeing the "Application Option" i am seeing the smart help. do we need to configure on "Application Option" or on smart help. Where ever is see the doc it says configure oracle_gateway.html but i dont see oracle/hemi folder at all. do know if there is a set up that has to be done to get this option (UPK 11.10.1)
Thanks

My itunes id is blocked by apple because of an internal problem trying to update the itunes version, apple support is not helping at all and I need to update all my application. Is anybody you had this problem before? and how did they help? thanks

my itunes id is blocked by apple because of an internal problem trying to update the itunes version, apple support is not helping at all and I need to update all my application. Is anybody you had this problem before? and how did they help? thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

My original note application is always crashed and i can't open it. Can you help me please??? Urgent

My original note application is always crashed and i can't open it. Can you help me please??? Urgent

CLOSE FROZEN APPS
Hold the sleep button until ON/OFF slider appears. Let go of sleep button and ignore slider and then hold home button until the app closes
Then do this
RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

After backing up my iPod my applications will not reload and just shows waiting underneath the application any help?

After backing up my iPod my applications will not reload and just shows waiting underneath the application, any help?

http://lifehacker.com/5948155/fix-iphone-apps-stuck-waiting-during-installation
http://alvinalexander.com/apple/iphone-waiting-apps-update-install-reinstall-del ete-ipod

Can I put taks in my ical. They talk about a pin but I cannot find one on my application on my ipad and on my computer. Can somebody help me. Thanks.

can I put taks in my ical. They talk about a pin but I cannot find one on my application on my ipad and on my computer. Can somebody help me. Thanks.

re-post in the iMovie forum: https://discussions.apple.com/community/ilife/imovie. Good luck.

I have a Mac OS X Snow Leopard. For some unknown reason the Library application in Finder disappeared and I was using it only two days ago. Please could someone help? Thanks.

I have a Mac OS X Snow Leopard. For some unknown reason the Library application in Finder disappeared and I was using it only two days ago. Please could someone help? Thanks.

Hi cb-anc! Thank you for replying to my question. The Library application has disappeared,not the library folder. I went into the application a couple of days ago to trash some plist files and now the application has disappeared. I haven't upgraded to Lion but am still on now Leopard.

Application.cfm in root and subdirectory, help.

I cannot figure this out. I understand that an application
will use the application.cfm file in it's current directory first
and not search further. However, my page in a subdirectory seems to
not see the application.cfm in it's own directory and instead uses
the root application.cfm. Can anyone explain? And I have tried
capitalizing the "A", etc. but I am not using Linux so I do not
think it matters anyway. (CF MX)

Hard to tell exactly, but in the subdirectory, is the ONLY
line the <cfset application.dsn_test = "DiningHall">?
If so, the subdirectory application.cfm would execute and the
parent would not, which would cause the undefined error since from
what I can tell, you haven't used the <cfapplication> tag in
the subdirectory.
What you can do is use a cfinclude in the subdirectory
application.cfm.
<cfinclude template="../application.cfm">
<cfset application.dsn_test = "DiningHall">
However.... That's a big no no if you're using this to
actually change application scope parameters, since someone
visiting the subdirectory would reset the DSN for someone that
might still be navigating around in the parent directory.
So what good is using the cfinclude method? Well, you can
lock subdirectories to roles this way.
<cfinclude template="../application.cfm">
<cfif getAuthUser() eq "" or not IsUserInRole("Admin")>
Access Denied!
<cfabort>
<cfif>
Consider changing the DSN setting to use the request.scope to
isolate the change to the user.
<cfset Request.appDSN = "DININGHALL">

Need Help on Real Application Testing (RAT) installation and configarations

Hi Folks,
We are expecting an opportunity across RAT implementation in near future and our team is trying explore on RAT and need help in installation and configurations .Am looking for some RAT
contacts ,please help me..
Thanks,
Jay.

Q1
I have not had a space issue in the RAT capture files that caused a database issue when space ran out.
Q2
You will miss anything you filtered the capture on, anything that errored during the capture
Capture will also not get and to be aware of
Direct Path Load (SQL Loader)
Shared server (Oracle MTS)
Oracle Streams & Advanced Replication Streams
Non-PL/SQL based Advanced Queuing (AQ)
Flashback queries
OCI-based Object Navigation
Non SQL-Based Object Access
Distributed transactions, remote describe/commit operations (will be replayed as local transactions)
Q3
I typically use DB Replay for an overall work load perspective, SPA for SQL Level.
For example I will to a DB replay find from my reports SQL that needs a further look see and use SPA from there.
or potentially use SPA to focus on the SQL itself and not concern myself the the whole workload until I am ready.
Q4
Set the SCN for when capture is started, have the replay database be recovered to that SCN prior to any replay operation. No real need to shutdown, done this many times with success.
Q5
Typically I will filer any grid control agent or other agent software activities from the capture for sure.
Q6
Your Capture Report does not show anything?
Q7
You can extract and load AWR with the following packed procedures
sys.dbms_swrf_internal.awr_extract
sys.dbms_swrf_internal.awr_load

Photoshop CS4 in-application help

I am using the trial Photoshop CS4 and cannot get the in-application Help to work. the CS3 Help works just fine.
When I launch Help from the Menu bar I am directed to the Adobe Site.
When I launch the Adobe Help application from the Applications folder, I get the Help window, and when I click on the 'Help for' menu and Choose 'Adobe Photoshop CS4' I get this
"This topic is in the Help system of another product. To view the topic, install that product. file:///Library/Application%20Support/Adobe/Help/en_US/Photoshop/11.0/help.html'
I need 'Help' with 'Help'.
Fitz

What Buko says.
Also, when you've opened that page, you'll see a little (
very little) PDF icon at the top there, which gives you the option of downloading the whole Help site as a 40+MB PDF document to your drive. Useful if you're always connected to the Internet, but it has the downside of not benefiting from updates, additions and corrections.

Need help to insert and update records in MDM

Hi ,
I am trying to develop an webdynpro application which can create and update records in tables of a repository of MDM . For example .. I want to insert values and later update values in Vendor table.
I am new to webdynpro and MDM. If any one can help step by step or can send a sample code which I can be ready to use that would be great help.
If anyone can have a sample code .. kindly mail to "[email protected]"
It is urgent. Please help.
Regards,
Niraj
Edited by: Niraj Kumar on May 23, 2008 6:50 AM

Hi Niraj,
Are u going to work with webdynpro Java/ABAP?
some materials which are found useful are sent.
Cheers,
Mary

Help file open and disapper with flash

Hi,
I am facing a very strange problem.In the application help open and disappear,but CHM files are available in the program files.
Where can be the problem?
Thanks and Regards,
Rahul

1. It WON'T show up in your Start menu because it's a "plugin" for another program and not a program itself. You can find it in C/Windows/System32/Macromed/Flash and C/Windows/SysWOW64/Macromed/Flash
2. In your Control Panel under System and Security, you'll find the Global Settings Manager - Flash Player (32bit). THAT won;t be there if it isn't installed.
IE 11 has had numerous problems with numerous sites, which Microsoft has been aware of since October 18 when they released their latest "untested" browser. There's something not right in the code. The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Application Help in IR and ID

Similar Messages

Maybe you are looking for