Application Hierarchy in BW and Generic Datasources

Hi,
I am not able to see the updated Application Hierarchy in BW. ie with the Datasources I installed from RSA3 in the R3 system. I am successfully using then by loading them but it shows in New_Hier_root and then shows in Nodes_not_connected.
I had done the following
- in R3 - rsa5 - activated extractor,
rsa6- check extractor,
sbiw - transfer application comp hier
in BW - replicate data sources - assign - install Biz content - use it in loading
I need to create a Generic Datasource for a Y Table, again I am not able to specify an application component for the same, since it shows the unupdated applicaiton component hierarchy.
Please help
Thanks
Pranab

Dear Ravindra,
I am not able to address that issue through that.
When i go to SM31 and go to table you suggested it
- Its attributes indicate it is transportable in R3 and in BW
Kindly help the Issue has not be addressed yet .

Similar Messages

View and Generic datasource in a transport request

Hi All,
I have created a view and a generic datasource by using the same in R/3. But I have saved them as local objects. Can some one please guide me through to collect them in a transport request to send them across the landscape.
Many thanks in advance...
Best Regards,
Nene.
Message was edited by:
Nene BW

View: SE11 -> Goto -> Object directory entry -> Assign a transportable package
DS: RSA6 -> Transport button ...

BTE AND Generic Datasource

I have a standard table REGLRO i want to find the BTE so that i can create the delta for this generic datasource, can u tell me how can i create the BTE or where to find what is the BTE that captures the changes to the Table needed.
I do not have last change date in my table so no straight delta technique applicable. help me if you any other way to make the delta at datasource level.
Thanks
Regards
Soniya

Hi,
Were U able to solve this issue?
If yes please let me know ..
thanx and regards,,
Mustafa

Applications Won't Open and Generic Icons

Odd problem: the computer (PowerMac G4 Dual 450 with 10.3.9) boots up fine, but all icons have reverted to their generic form and no applications actually open - every app either bounces once and then stops or doesn't even bounce. I tried to use Disk Warrior, but it can't boot off of the CD - it hangs on the grey apple screen. If I try and open a .dmg I get a "no mountable systems found." Taking the preferences out of the library folders didn't work, and neither did trashing the font preferences.
The only thing I can think of that I did before the problem started happening was put in a USB memory stick and enable Fast User Switching, but neither had an immediately obvious effect.
It's looking like I'm going to have to try an archive and reinstall, but if anyone has any other ideas I'd love to hear them.
Thanks in advance.

Try this and see if it works.
kmosx: Apps unexpectedly quit
Posted: Dec 19, 2004 8:11 AM
Here are some possible reasons for this problem.
1. Recent Update: Download and reapply the most recent Combo Update: Mac OS X Combined Update 10.3.9 or Mac OS X Update 10.4.2 Combo
2. Font duplicates: Please read the articles by Kurt Lang and J.Otava here: Kurt Lang: Font Management in OS X Panther and J.Otava: Fonts & Apple Type Services
3. Corrupted preferences:
Go to Users/Your_Name/Library/Preferences and trash the files:
- com.apple.ATS.plist
- com.apple.BezelServices.plist
Restart. If this did not help, go to Users/Your_Name/Library and drag the folder Preferences to the desktop. Restart and see if this solved the problem
4. Permissions:
Symptoms:
a. Only Apple applications affected
b. Also happens when you switch to a new user.
c. First appeared after update to 10.3.4, 10.3.5 or 10.3.6
This usually happens if you do not repair permissions before you update to 10.3.4 or later. There are (unconfirmed) hints that corrupted cache files might also contribute to this problem. You can clean caches with programs like Cocktail or Panther Cache Cleaner. The only solution I am aware of is to do an Archive&Install.
You also might want to read this article: Applications don't work after reinstalling Mac OS X
Remember: Repair permissions before and after an update!
If none of the above solves the problem you might have to do an Archive&Install:
1. Insert the Install CD 1 and reboot while holding down the c-key
2. Once you are booted go to the menu and select disk utility
3. Repair the disk and Repair permissions!
4. Quit disk utility and proceed with the installation
5. Under "options" select "Archive&Install" and check the box "keep user and network data".
6. Install Panther
7. Restart
8. Go to the folder Application/Utilities and run disk utility to repair permissions again.
9. Download (or open if you downloaded before) Mac OS X Combined Update 10.3.9 or Mac OS X Update 10.4.2 Combo and install it.
10. Restart and repair permisssions
11. Go to the Apple menu and select "Software Update"
12. Install all missing updates and restart.
13. Repair permissions
For further information on Archive&Install read these articles:
Mac OS X 10.2, 10.3: About the Archive and Install feature
a brody: Installation options and their meaning

Generic datasource based on custom table and hierarchy table

Hi Gurus,
I have a doubt regarding generic datasource.
my requirement: to create a datasource with 10 fields. (7 fields from custom table and 3 fields whose values can be derived from a hierarchy table).
I have a custom table. In this table one field refers to a hierarchy table. Using this hierarchy table, we can derive values to 3 new fields.
My question is, If i create a generic datasource based on the custom table, how can i include the extra 3 fields which gets values from the hierarchy table.
Where can i write the logic to extract the values for those 3 fields from the hierarchy table.
Thanks
Regards,
Aarthi
[email protected]

Hi Aarthi,
Sample code in the user exit woul be like this:
DATA: i_biw_tab LIKE BIW_MARA_S.
WHEN '<data source>'.
    LOOP AT i_t_data INTO i_biw_tab.
      SELECT fields
        INTO <table from which you want the value
        FROM <table>
       WHERE <your condition>.
      IF sy-subrc = 0.
             MODIFY i_t_data FROM i_biw_tab.
      ENDIF.
    ENDLOOP.
Bye
Dinesh

Generic navigation block,Hierarchy filter selection and Filter

Hi all,
Could any one explains what is the difference between a filter and Generic navitgation block & a filter and Hierarchy filters.
How the filters in web reports differs the filters in queries.
Regards,
Preetham

Hi,
Filters:
In your Web application, you can select filter values for characteristics and structures. The Web application is then filtered according to these selected values.
Generic Navigation Block:
The Web item Generic Navigation Block displays the navigational state of a query view in the Web application in the form of a table. All characteristics and structures in the query view are listed in the table and their filter values are displayed. You can change the navigational status of the query view. You can transfer characteristics and structures to an axis (rows or columns) or from an axis. You can filter according to single values and remove the filter again.
Hierarchy Filter:
You can search through leaves and nodes in the hierarchies of your Web application.
Seen this?:
http://help.sap.com/saphelp_nw04/helpdata/en/70/4c7ead79eaf0498afa31528072900d/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/35/a5507170d8c548a25e4e532f3917a3/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/35/a5507170d8c548a25e4e532f3917a3/frameset.htm
assign points if useful ***
Thanks,
Raj

Business scenarios on SD and MM modules for generic datasources and enhance

Hi,
Can anybody send some documents on SD and MM module on generic datasource and on enhancements.Pl send it to my MailID:[email protected]
Thanks,
Chinna

Hi,
MM Process flow:
The typical procurement cycle for a service or material consists of the following phases:
1. Determination of Requirements
Materials requirements are identified either in the user departments or via materials planning and control. (This can cover both MRP proper and the demand-based approach to inventory control. The regular checking of stock levels of materials defined by master records, use of the order-point method, and forecasting on the basis of past usage are important aspects of the latter.) You can enter purchase requisitions yourself, or they can be generated automatically by the materials planning and control system.
2. Source Determination
The Purchasing component helps you identify potential sources of supply based on past orders and existing longer-term purchase agreements. This speeds the process of creating requests for quotation (RFQs), which can be sent to vendors electronically via SAP EDI, if desired.
3. Vendor Selection and Comparison of Quotations
The system is capable of simulating pricing scenarios, allowing you to compare a number of different quotations. Rejection letters can be sent automatically.
4. Purchase Order Processing
The Purchasing system adopts information from the requisition and the quotation to help you create a purchase order. As with purchase requisitions, you can generate Pos yourself or have the system generate them automatically. Vendor scheduling agreements and contracts (in the SAP System, types of longer-term purchase agreement) are also supported.
5. Purchase Order Follow-Up
The system checks the reminder periods you have specified and - if necessary - automatically prints reminders or expediters at the predefined intervals. It also provides you with an up-to-date status of all purchase requisitions, quotations, and purchase orders.
6. Goods Receiving and Inventory Management
Goods Receiving personnel can confirm the receipt of goods simply by entering the Po number. By specifying permissible tolerances, buyers can limit over- and underdeliveries of ordered goods.
7. Invoice Verification
The system supports the checking and matching of invoices. The accounts payable clerk is notified of quantity and price variances because the system has access to PO and goods receipt data. This speeds the process of auditing and clearing invoices for payment.
Common Tables used by SAP MM:
Below are few important Common Tables used in Materials Management Modules:
EINA Purchasing Info Record- General Data
EINE Purchasing Info Record- Purchasing Organization Data
MAKT Material Descriptions
MARA General Material Data
MARC Plant Data for Material
MARD Storage Location Data for Material
MAST Material to BOM Link
MBEW Material Valuation
MKPF Header- Material Document
MSEG Document Segment- Material
MVER Material Consumption
MVKE Sales Data for materials
RKPF Document Header- Reservation
T023 Mat. groups
T024 Purchasing Groups
T156 Movement Type
T157H Help Texts for Movement Types
MOFF Lists what views have not been created
A501 Plant/Material
EBAN Purchase Requisition
EBKN Purchase Requisition Account Assignment
EKAB Release Documentation
EKBE History per Purchasing Document
EKET Scheduling Agreement Schedule Lines
EKKN Account Assignment in Purchasing Document
EKKO Purchasing Document Header
EKPO Purchasing Document Item
IKPF Header- Physical Inventory Document
ISEG Physical Inventory Document Items
LFA1 Vendor Master (General section)
LFB1 Vendor Master (Company Code)
NRIV Number range intervals
RESB Reservation/dependent requirements
T161T Texts for Purchasing Document Types
Transaction Codes:
RFQ to Vendor - ME41
Raising Quotation - ME47
Comparison of Price - ME49
Creation of PO - ME21N
Goods Receipt - MIGO
Invoice (Bill PAssing) - MIRO
Goods Issue - MB1A
Physical Inventory - MI01( Create doc)
MI04 (Enter Count)
MI07 (Post)
Also please check this links.
http://www.sapgenie.com/sapfunc/mm.htm
http://www.sap-basis-abap.com/sapmm.htm
SD Process Flow:
The sales documents you create are individual documents but they can also form part of a chain of inter-related documents. For example, you may record a customers telephone inquiry in the system. The customer next requests a quotation, which you then create by referring to the inquiry. The customer later places an order on the basis of the quotation and you create a sales order with reference to the quotation. You ship the goods and bill the customer. After delivery of the goods, the customer claims credit for some damaged goods and you create a free-of-charge delivery with reference to the sales order. The entire chain of documents the inquiry, the quotation, the sales order, the delivery, the invoice, and the subsequent delivery free of charge creates a document flow or history. The flow of data from one document into another reduces manual activity and makes problem resolution easier. Inquiry and quotation management in the Sales Information System help you to plan and control your sales.
Transaction Codes:
Inquiry - VA11/VA12/VA13
Quotation - VA21/VA22/VA23
Sales Order - VA01/VA02/VA03
Delivery - VL01N/VL02N/VL03N
Billing/Invoicing - VF01/VF02/VF03
Also please check this links.
http://www.sapgenie.com/sapfunc/sd.htm
http://www.sap-basis-abap.com/sapsd.htm
http://www.sapgenie.com/abap/tables_sd.htm
Production Planning:
For example, consider a pump manufacturing plant, based on the customer requirement, planning is done for future months ( we plan for a qty on particular
date). Pump is an assembly - were main component would be manufactured in the plant and others would be procured. As PP, we are concerned only in the inhouse
manufacturing but the final assembly (considering BOM) can be done only if the procured components are available. MRP helps in planning the shortage, on
particular date based on the planned date. Work center (ex. lathe) place the components are machined/assembled (were the operation is done). Sequence of
operation is routing (lead time scheduling data is got from routing). In the MRP Run,basic or lead time scheduling (need to know when to start/finish date)
is done. On creation of the production order, system checks for which BOM and routing to be picked up (if there are many routings or BOM for that particular
finished product). Availabilty checks for material,PRT and capacity needs to be done. on release of the order, confirmation of the order can be done (on
completion of the order or after manufacturing the quantities). GI and GR have to be done.PP flow ends here
step 1: creation of master data (Material master,BOM,Work center,Routing)
step 2: Planning - can be done by Planned independent requirement (MD61), Independent requirement (MD81).
we plan for a quantity, on which date (it would be finish date).
step 3: MD04 -stock/requirement lsit (plan made can be viewed in MD04)
step 4: MRP run - MD02, PIR is converted into Planned order
step 5:Planned order to be converted production order - CO40, CO41
step 6: production order to be released - CA02
step 7: confirm the production order (order confirmation-CO15 (after which GI and GR is done)
assign pts if helpful...

Generic Datasource with Delta and functionmodule

Hi together,
who can help me ??
Ihave created a generic datasource with function module and
delta.
the extractor runs well while i use full update and also initialization.
If i start the delta extraction, the extractor crashed with short-dump.
the message is SAPSQL_INVALID_FIELDNAME
What can i do, and what is wrong.
regards
thorsten Weiss

Hi Roberto,
here is the code from the function-module:
FUNCTION zbw_mm_get_eket.
""Lokale Schnittstelle:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE DEFAULT 1000
*"     VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SBIW_BOOL DEFAULT SBIW_C_FALSE
*" TABLES
*"      I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*"      E_T_DATA OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
INCLUDE lrsalk01.
DataSource for table EKET
TABLES: zv_mm_eket.
interne Tabelle für Bearbeitung
DATA:   itab_0 TYPE TABLE OF zstr_eket WITH HEADER LINE.
TYPES: BEGIN OF typ_categ,
          j_4kbwef    TYPE atnam,
          /afs/bwel   TYPE j_4kbwef,
         END OF typ_categ.
DATA: l_s_data_eket TYPE zstr_eket,
        ld_cat_struct TYPE j_4kcsgr,
        lt_cat_fields TYPE TABLE OF j_4kcif001,
        ls_cat_fields TYPE j_4kcif001,
        ls_mara        TYPE mara,
        l_tabix        LIKE sy-tabix,
        itab_cat       TYPE TABLE OF typ_categ ,
        ls_cat         TYPE typ_categ,
        h_feldsize1(8)        TYPE c,"wegen Typ-konflikt im FB
        h_feldsize2(8)        TYPE c."wegen Typ-konflikt im FB
Auxiliary Selection criteria structure
DATA: l_s_select TYPE rsselect.
Maximum number of lines for DB table
STATICS: s_t_select     LIKE rsselect OCCURS 0 WITH HEADER LINE,
           s_t_fields     LIKE rsfieldsel OCCURS 0 WITH HEADER LINE,
counter
          s_counter_datapakid LIKE sy-tabix,
cursor
          s_cursor TYPE cursor.
Select ranges
RANGES: l_r_ebeln       FOR zv_mm_eket-ebeln,
          l_r_ebelp       FOR zv_mm_eket-ebelp,
          l_r_bsart       FOR zv_mm_eket-bsart.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    CASE i_dsource.
      WHEN 'ZDS_V_MM_EKET'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE e009(r3). ENDIF.
this is a typical log call. Please write every error message like this
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  i_dsource            "message variable 1
                  ' function modul was created for DS ' &
                  'ZDS_V_MM_EKET"!'.
        "message variable 2
        RAISE error_passed_to_mess_handler.
    ENDCASE.
    APPEND LINES OF i_t_select TO s_t_select.
Fill parameter buffer for data extraction calls
   S_T_SELECT-REQUNR    = I_REQUNR.
   S_T_SELECT-DSOURCE   = I_DSOURCE.
   S_T_SELECT-MAXSIZE   = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF i_t_fields TO s_t_fields.
ELSE.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    IF s_counter_datapakid = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
      LOOP AT s_t_select INTO l_s_select WHERE fieldnm = 'EBELN'.
        MOVE-CORRESPONDING l_s_select TO l_r_ebeln.
        APPEND l_r_ebeln.
      ENDLOOP.
      LOOP AT s_t_select INTO l_s_select WHERE fieldnm = 'EBELP'.
        MOVE-CORRESPONDING l_s_select TO l_r_ebelp.
        APPEND l_r_ebelp.
      ENDLOOP.
      LOOP AT s_t_select INTO l_s_select WHERE fieldnm = 'BSART'.
        MOVE-CORRESPONDING l_s_select TO l_r_bsart.
        APPEND l_r_bsart.
      ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
      OPEN CURSOR WITH HOLD s_cursor FOR
      SELECT (s_t_fields) FROM zv_mm_eket
      WHERE
      ebeln      IN               l_r_ebeln           AND
      ebelp      IN               l_r_ebelp         AND
      bsart    IN             l_r_bsart.
    ENDIF.                             "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
   FETCH NEXT CURSOR s_cursor
              APPENDING CORRESPONDING FIELDS
              OF TABLE e_t_data
              PACKAGE SIZE i_maxsize.
    FETCH NEXT CURSOR s_cursor
               APPENDING CORRESPONDING FIELDS
               OF TABLE itab_0
               PACKAGE SIZE i_maxsize.
    LOOP AT itab_0 INTO l_s_data_eket.
      l_tabix = sy-tabix.
Lesen Erstellungsdatum aus EKKO
      SELECT SINGLE aedat FROM ekko INTO l_s_data_eket-sydat
                     WHERE ebeln = l_s_data_eket-ebeln.
Lesen Partner aus EKPA
      SELECT SINGLE lifn2 FROM ekpa INTO l_s_data_eket-plief
                     WHERE ebeln = l_s_data_eket-ebeln AND
                           ebelp = l_s_data_eket-ebelp AND
                           ekorg = l_s_data_eket-ekorg AND
                           werks = l_s_data_eket-werks .
      IF NOT l_s_data_eket-matnr IS INITIAL .
*A Lesen material für Kategoriestruktur j_4kcsgr(F001 oder R002)
        CLEAR ls_mara.
        CALL FUNCTION 'J_3A1_LESEN_MARA_SINGLE'
             EXPORTING
                  i_matnr         = l_s_data_eket-matnr
             IMPORTING
                  e_mara          = ls_mara
             EXCEPTIONS
                  param_not_valid = 1
                  OTHERS          = 2.
        IF sy-subrc NE 0.
        ENDIF.
*E Lesen material für Kategoriestruktur j_4kcsgr(F001 oder R002)
*A Aufsplitten Bestandskategorie
        REFRESH lt_cat_fields.
        CALL FUNCTION 'J_4KG_SPLIT_CAT'
          EXPORTING
            client                            = sy-mandt
            csgr                              = ls_mara-j_4kcsgr
            cat_appl                          = 'S'
            cat_value                         = l_s_data_eket-j_4kscat
NECESSARY_SPECIFIED               = ' '
          TABLES
            cat_fields_tab                    = lt_cat_fields
          EXCEPTIONS
            no_category_structure_found       = 1
          OTHERS                            = 2.
        IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ELSE."sy-subrc <> 0
Verarbeitung der Ergebnisse
          LOOP AT lt_cat_fields INTO ls_cat_fields.
            IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_SCONFIG'.
              l_s_data_eket-zz_bwel_sconfig = ls_cat_fields-j_4kcatv.
            ENDIF.
            IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_CONFIG'.
              l_s_data_eket-zz_bwel_config = ls_cat_fields-j_4kcatv.
            ENDIF.
            IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_COUNTRY'.
              l_s_data_eket-j_3abwel_country = ls_cat_fields-j_4kcatv.
            ENDIF.
            IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_COUNTRYGRP'.
              l_s_data_eket-zz_bwel_coungrp = ls_cat_fields-j_4kcatv.
            ENDIF.
            IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_STOCKTYPE'.
              l_s_data_eket-zz_bwel_stktype = ls_cat_fields-j_4kcatv.
            ENDIF.
            IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_ORDER'.
              l_s_data_eket-zz_bwel_order = ls_cat_fields-j_4kcatv.
            ENDIF.
            IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_QUALITY'.
              l_s_data_eket-j_3abwel_qual = ls_cat_fields-j_4kcatv.
            ENDIF.
          ENDLOOP."lt_cat_fields
        ENDIF.
*E Aufsplitten Bestandskategorie
*A Aufsplitten MAtrix
        IF NOT l_s_data_eket-j_3asize IS INITIAL.
          CALL FUNCTION 'J_3A_SPLIT_SIZES'
               EXPORTING
                    matnr              = l_s_data_eket-matnr
                    j_3asize           = l_s_data_eket-j_3asize
               IMPORTING
                    j_3akord1          = l_s_data_eket-j_3abwel_color
                    j_3akord2          = h_feldsize1
                    j_3akord3          = h_feldsize2
               EXCEPTIONS
                    no_grid_determined = 1
                    OTHERS             = 2.
          IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ELSE.
            l_s_data_eket-zz_bwel_size1 = h_feldsize1.
            l_s_data_eket-zz_bwel_size2 = h_feldsize2.
          ENDIF.
        ENDIF."not l_s_data_eket-J_3ASIZE is initial
*E Aufsplitten MAtrix
        MODIFY itab_0 FROM l_s_data_eket INDEX l_tabix.
      ENDIF."not l_s_data_eket-matnr is initial
    ENDLOOP.                                                "itab_0
An Ausgabe-Tabelle übergeben
    APPEND LINES OF itab_0 TO e_t_data.
    IF sy-subrc <> 0.
      CLOSE CURSOR s_cursor.
      RAISE no_more_data.
    ENDIF.
    s_counter_datapakid = s_counter_datapakid + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.
regards
thorsten

Unable to see the generic datasource in BI system

Hi All,
I have created the Generic datasource in R3 using Function Module. i could see the Datasource in RSA6 .When i have replicated i could not find the datasource in the BI system .The source system is connected perfectly.could you please let me know the reason or im missing anything
Regards
AK

thanks for your reply.
One more point is i could not find the application component hierarchy in BIW.i tried the RSA9 too
In R3 i have saved in MM Application component.
Regards
AK

LIS and Generic Extraction

Hi All,
Could someone please send me some information regarding LIS extraction and Generic extraction.
Thanks in advance,
Sekhar

Hi Sekhar,
Please do check the link for step by step for generic xtraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
LO Extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Check these links:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Re: LO-Cockpit V1 and V2 update
Also Refer this link:
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
FI-CO 'Data Extraction -Line Item Level-FI-CO
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
How to do basic LO extraction for SAP-R3-BW
1. Go to transaction code RSA3 and see if any data is available related to your DataSource. If data is there in RSA3 then go to transaction code LBWG (Delete Setup data) and delete the data by entering the application name.
2. Go to transaction SBIW --> Settings for Application Specific Datasource --> Logistics --> Managing extract structures --> Initialization --> Filling the Setup table --> Application specific setup of statistical data --> perform setup (relevant application)
3. In OLI*** (for example OLI7BW for Statistical setup for old documents : Orders) give the name of the run and execute. Now all the available records from R/3 will be loaded to setup tables.
4. Go to transaction RSA3 and check the data.
5. Go to transaction LBWE and make sure the update mode for the corresponding DataSource is serialized V3 update.
6. Go to BW system and create infopackage and under the update tab select the initialize delta process. And schedule the package. Now all the data available in the setup tables are now loaded into the data target.
7.Now for the delta records go to LBWE in R/3 and change the update mode for the corresponding DataSource to Direct/Queue delta. By doing this record will bypass SM13 and directly go to RSA7. Go to transaction code RSA7 there you can see green light # Once the new records are added immediately you can see the record in RSA7.
8.Go to BW system and create a new infopackage for delta loads. Double click on new infopackage. Under update tab you can see the delta update radio button.
9.Now you can go to your data target and see the delta record.
find your scenario and find what data sources do you need on R3 side and ensure they are active as well:
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
find your scenario -> data sources -> go to R3 -> sbiw and activate required data source
replicate data sources in BW:
RSA1 -> source systems -> right click on your source system -> replicate
then activate your BC:
service.sap.com/bi -> BI Business Content -> General Information -> SAP BW Business Content - Activation
and execute infopackage (it should be delivered with BC)
Useful links:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
service.sap.com/bi -> BI InfoIndex
sdn.sap.com -> Business Information Warehouse -> How-To guides (under Quick Links)
Hope This Helps.
****Assign Points If Helpful****
Regards,
Ravikanth

'table does not exist' when creating generic datasource

I went to SBIW->Business Content DataSources->Transfer Business Content DataSources-chose "content delta". it said 'comparison bct <-> cust version ' then it counted thru several objects for a few minutes and finished with no warnings.
then I selected each datasource under co-om-cca and activated those with no problems.
problem: now when i try to create came generic datasource using co-om-cca application component i get mssg when saving 'the specified table does not exist'...so now it isn't even letting me create a datasource at all using a standard application component either.
I have been having many problems with creating datasources and using application components and this is why I did the first paragraph because I don't know what else to try.
Please help, thanks.

I have answered my own question. I wasn't entering the view/table and it was my own complete oversight.

Exposure of BI Content/Generic DataSources in Data Services XI 3.x

We were told by SAP Business Objects personnel back in May 2009 that SAP DataSources (standard content and generic) would be exposed in SAP Business Objects Data Services XI 3.2. We have recently upgraded Data Services, in a sandbox environment, to XI 3.2 and found that this isn't there.
After pinging some others that we know at SAP, we're now hearing that this won't be available until SP4. Is this correct? Right now, the unrestricted shipment version is SP0 and we're wondering if it truly is SP4 or SP0 FP4 when then is scheduled to be in unrestricted shipment and when these are scheduled to be released for general customer consumption. Can anyone from SAP monitoring this forum comment?

Hi Dennis:
BW uses the business content extractors. In 4.0 Data Services will also use the Business Content extractors.
This does not mean BW customers have to start using Data Services; SAP is not replacing the connectivity between ECC and BW. Data Services is added as an option to the landscape and adds the option of accessing other 3rd party sources u2013 one single tool to extract data.
With Data Services, you have the possibility to consolidate extraction rules into one platform. You can also make sure you can load correct and clean data into target application with the data quality components of Data Services.
You just need to know the name of the extractor and connect. No ABAP programs are generated, making it easier to deploy and maintain.
Since you originally posted your question almost two years ago you might be aware of this but I think people visiting this forum in the future may find very useful information on the blog by Tammy Powlas.
SAP BusinessObjects Data Services - What is new in 4.0?
/people/tammy.powlas3/blog/2011/04/18/sap-businessobjects-data-services--what-is-new-in-40
Regards,
Francisco Milán.
Edited by: Francisco Milan on May 24, 2011 4:12 PM

Problem while attaching master data source to generic datasource

Hi All,
I have created a generic datasource using three tables in crm systems. the tables are CMSD_CB, CMAD_LO_PRICE AND CMSD_LO_QUANT.
i have loaded data to bw system and want to attach 0ORGUNIT master datasource to the generic datasource. so that i can get 0ORGUNIT hierarchy and sales grp/office details.
could some one help how to solve this problem.
Thanks in advance.
Thanks,
Mahantesh

You don't have to attach the master data datasource to your generic datasource.
Master data is loaded separately from transaction data, so you will see your hierarchy from the moment you loaded it with the 0ORGUNIT hierarchy datasource into your infoobject 0ORGUNIT.

Time Lag using Timestamp - Generic Datasource

Hello,
I have a generic datasource running in production now. It uses the timestamp for the delta.
Currently the delta runs twice a day - once around 7 am and then again around 1 pm.
I have the upper limit set at 1800 seconds (30 minutes) and no lower limit however when I looked today at the 1 pm pull, the last set of records was pulled up to 9 am. I was surprised. I thought it should have been closer to 12 noon.
This data is constantly updated in ECC - for example. In a 30 minute window, the record count started at 1,966,206 and jumped to 1,966,297.
Has anyone else experienced this lag time? If so, how did you handle it.
I heard from one person that it could be because the application server time is different than the local time of entry. If that is true, how could I resolve that?
I would just like the deltas to bring in the data closer to the time of the pull.
Thanks for any insight.
Lynda

seems to be working correctly in production.
1800 seconds - 30 minute pulls via timestamp

Creating generic datasource

Hi Experts,
while i have created a generic datasource from RSO2 and when i am trying to check data for that datasource it is giving that that datasource is not there in the source system.
can any pls explain how to solve this and when i am creating datasource i could not able to give the specific application for the data source. where should we assign source system for this generic datasource.
thans,
sree

Hi,
Which type of data source you have created.are you able to see your data source in RSA6??
If you are able to see it there then only you can use RSO2 for it.
Try RSA2 for the data source and see if it shows you or not.
You have to put in transaction or master or text and then check in RSO2.
Generally the data source is assigend to the area which it belongs..like if the datsource is related to SD module then create it in the SD application area.You can also create a Z apllication area for generic data source and assign them to the newly created data source...but still should prefer to create in the area related to the data source...and replicate them to BW.
Thanks
Ajeet

Application Hierarchy in BW and Generic Datasources

Similar Messages

Maybe you are looking for