Application Importing Problem??

Hello ALL,
I have created one of the application yesterday on apex.oracle.com, and from yesterday apex workspace upgraded from 3.1.2 to 3.2.0
Now when I am importing the application into the my PC(which is having 3.1.2) I am getting error as:-
"1 error has occurred
NOT COMPATIBLE (Your export may contain calls not supported by your application version.)"
I know its because of this version problem, so is their any other way from where I can create the application on apex(3.2.0) and import the same into my PC(3.1.2) without any errors????
Also this new version doesn't have backward compatibility, I'm having doubt??????
Thanks,
Regards,
Kumar

Hello,
>> Also this new version doesn't have backward compatibility, I'm having doubt??????
Backward compatibility means that applications that were created in previous versions will run smoothly on the new version. APEX (and HTML DB before that) always maintained backward compatibility, and this principle was most likely preserved with 3.2.
You can’t load an application, which was created on a specific version, into an earlier version, because the earlier version might not support certain enhanced attributes, that were added into the newer version (pretty much as the error message stated). This was the case for all previous versions, and it also applies now.
Regards,
Arie.

Similar Messages

Application import problems with current apex on 11.1.0.7 and 11.1.0.6

Hello,
i have Application Express 3.2.1.00.10 up and running so far.
11.1.0.7 patch is applied.
I can't import an recently exported application with apex.
error: The requested URL /apex/wwv_flow.accept was not found on this server.
If i try to copy the application i got:
ORA-01536: Speicherplatz-Zuteilung für Tablespace 'SYSAUX' überschritten
Unable to copy application 123.
Certainly there is no trouble with sysaux tablespace.
Importing an export file with sqlplus works.
- How to modify the export file to generate a new application?
- Is it possible without running in any primary key violation?
Thank you
Michael

Hi Michael,
one of your error describes that the SYSAUX tablespace can not allocate more memory. You need to extend one sysaux datafile:
Example extend sysaux datafile to 2GB:
ALTER DATABASE
DATAFILE '/data/xe/oradata/sysaux.dbf' RESIZE 2048000K;

Application Import broken in Apex 3.2.1.00.10?

Hiya, trying to import my app into a new installation of Apex. I choose the file type, choose the encoding (utf-8), choose the file, click "next" and it says:
*1 error has occurred*
File must be selected to upload.
(also, I cannot login using Internet Explorer as it always returns to the login screen without any error messages, but Firefox and Chrome I can login in, just that the import will not work. )
What's up?

Hi, I don't know the DAD (we're using mod_owa to boot so..)
But it appears that there is a 32 kb limitation in file uploads in mod_owa, and that's causing it. I don't know for sure since I do not administer the server and have no access to it in any way other than the apex web gui.
But I assume it is also possible to run the application import script through sqlplus?
As for the IE login problem, that was caused by the host name having an underscore. IE would not accept the cookie :)

LR3.2 import problem on computer with Windows OS

LR3.2 import problem on Windows OS
This is a continuation of a question that I posed on August 22, 2010 in the discussion string "Cannot import CR2". I have not been able to resolve the issue of importing an image into an existing folder location. I had not been able to work on this issue for a number of weeks due to other circumstances, until today.   Note that the following people had attempted to provide answers and suggestions already: ssprengel, JayS In CT.
I use a laptop with a Windows operating system and a Macintosh desktop with Snow Leopard. I run Lightroom on both of them. The Windows laptop has Windows Vista Home service pack 2, version 6.0 [6002]. Around August 12th I upgraded from Lightroom 2 [481478], to Lightroom 3 on the laptop. I left the LR2 on the laptop as well as LR3. On September 12th I upgraded the laptop to LR3.2. No other changes have been to the laptop or its software applications that I know of.
My current attempts at resolving the issue reveal that when I created a new catalog "Test Catalog" in LR3 and saved that catalog to my desktop new folder labeled "Test Catalog" that I can import an image into LR3.2 to a new folder on the laptop's desktop. I then deleted the images via LR3.2 Folders Remove function and tried to import the images into an existing folder as presented in the LR3.2 Import dialog, but get the error message "The following files were not imported because they could not be read.".   When I import images into a new folder placed on the desktop, I can use all functions in LR3 e.g. Develop module. I cannot import images into existing folders on the laptop's hard drive - I have tried importing into the entire existing folders in the following hierarchy: c:\users\Michael\My Documents\My Pictures\2010 but always get the same error message.
LR3.2 does correctly backups upon exiting each time I quit the program, so I know that there isn't any issue of writing to that backup folder which is contained in an upper folder that contains the lightroom catalogs. I have even created a new Word file, saved it into the folder with Lightroom catalogs, opened it up, modified it, saved it, and saw that it works OK, so that tells me there is no problem with a Read-Only folder attribute.
I cannot recall if upon the upgrade from LR2.6 to LR3 that I chose to upgrade the catalog to LR3 version. Would that matter, if yes, what do I verify, how do I manual upgrade the catalog.
History of actions between August 10th that I have taken follows between the [[[[ and ]]]]:
[[[[Preference settings for Default Catalog are set to start with a specific catalog that I call "Lightroom master catalog", it is not set to the "Load most recent catalog".
All of the following were using my laptop: Previously I had no problem with LR2 for any functions. I just purchased an Epson 7000 media storage device, and in early August and practiced importing images into LR2, and those images were pulled in OK. Next, I upgraded to LR3. I discovered that the Epson's images had been placed into a wrong folder when I opened LR3. I used the remapping function in LR3 to move the images into the correct folder. Next, I used a SanDisk card reader to import images into LR3 into an existing folder of images, but the following error message appeared "the following files were not imported because they could not be read" (Import Results said 'some import operations were not performed'). I tried importing a single image, and multiple images, but had the same error. I tried switching the card reader to each of 4 different USB port on the laptop, with the same error occurring on each USB port used.
In order to try to isolate the problem. I took the SanDisk card reader with the memory card and successfully imported the images into LR3 on my Macintosh desktop computer; so to me the problem is not the card reader or the memory card. I also used the SanDisk recovery disk while using my laptop to look at the files on the memory card and I could see all the images correctly while in the recovery program, but I have not copied the images to the laptop's hard disk, and have not tried an import into the laptop's LR3. I did not import images directly from my camera to the laptop LR3 since I did not think it would help with the troubleshooting.
I then ran the Repair from the Adobe LR3 CD upgrade disk, on my laptop. Then I tried doing the import using the SanDisk reader and memory card, but the same problem occurred and same error message, that the files could not be imported (I was trying to import into a folder of existing images). I then used the Laptop's Control Panel function to remove LR3 application. Then I did a fresh upgrade of LR3 on my laptop, but the same error message and I am unable to do any import of the memory card from the card reader. I then tried to do an image import from the Epson 7000 into the laptop, and the same error message and I am unable to do any import into a folder with existing images.   I then tried doing an image import into LR2 on the laptop, and got the same problem to occur when trying to import into an existing folder of images. I have a couple of Canon EOS SLR digital cameras, and the issue occurs for any of the file types of the cameras.
Went into LR3 Preferences, General Tab, I now checked the previously unchecked box for Import Options - "Show import dialog when a memory card is detected".
Connected the Canon XTi directly with a cable to the laptop computer. Note that Canon's information said that Picture Transfer Protocol is automatically used when the XTi is directly connected to a computer, so I did not need to change anything in the camera's menu for communications choices (there is no communication menu in fact). I selected one image and copied it to the laptop desktop. Tried to import it into LR3 into a folder of existing images but got the error message "Could not copy a file to the requested location." While in LR3, I changed the location of where the file would be copied into - any of my existing folders of images; tried 5 different folders, but kept getting the same error message.
With the card reader connected via USB port on the laptop, I copied one image file to the desktop, and then tried importing into LR3 into a folder of existing images. Got the error message "Could not copy a file to the requested location."]]]]

I am not clear if by 'import' you are trying to copy or move the files from a location to another or if you are adding the files to a catalog. My comments may not, therefore, be too helpful.
Firstly, with both LR2 and LR3 installed you will have both catalogs present, but if you try to open the LR2 catalog with LR3 you will be prompted to update the catalog. You will thus know which catalog you are working on.
Secondly, if you are reading direct from the camera, you should connect using the 'PC connection' mode.
Thirdly, there is an issue with reading .CR2 files directly from the early Canon DSLRs (in Europe named 300D, 350D, 400D). While they are visible with the Canon software, they can not be seen with Windows explorer nor can they be accessed with Lightroom.
I suggest that you take the CF card out of the camera and copy the files using Windows Explorer in to the destination folder. You are then sure that the files are on the PC.
If you have the right Codec installed, you can view them with Windows photo gallery; if you don't, you can use one of the Canon software packages to view the files. You are then sure that the files are not corrupted.
Then import the files to your LR catalog using the normal import routine selecting 'add without moving'. I have tried this routine successfully using my 350D using both LR1.x and LR3.x. If that doesn't work - I'm lost.
Frank

Application import/export failing, hopefully a simple one though

hi all,
i'm very new to oracle and am trying to get going with xe. i'm working between work and home and want to be able to transport wherever i'm at to work/home - so i thought the application import/export function would be the best way? first of all, is it?
if so - i keep getting the
failed to parse SQL query:
ORA-00942: table or view does not exist
error
i'm running the same versions of oracle, on the same platforms (Application Express 2.1.0.00.39, winXPpro all service packed up). both my users have dba roles and the apps work fine on the machines i created them on. the import and install processes claim to be successful and the error only comes up when i try to log in to the application. any ideas?
btw - the apps are just simple tests, dependences etc with a couple rows in each table]
any help be much appreciated even if its "go read this!" as i've googled away & got not much....
cheers!

Your problem is likely that in your office you do not have the tables required by your program. The export does not include your tables. You have to create them yourselves

Bug report: sql developer/application express application import

I noticed some bugs on deploying an application using sql developer 1.5.1-5440.
Using a single file deployment generated by apex including install/upgrade/remove scripts: Here's what happens:
# I tried installing version 1.1 of my application already existing. Connected to the parsing schema of the version 1.0 I can clearly see my app "dashboard(101)"
# using sql dev I tried an application import. Using the following import options buildstatus =runonly, autoassign app_id and checked run install scripts
# The install runs, but instead of using the upgrade script it simply runs the install script causing a lot of errors of course since the objects already exist in the schema
# After this installation the application is visible in the workspace using a browser dashboard(102), however it remains invisible in sql developer where i can still only see dashboard(101)
After this failure I decided to go ahead and try once more doing the same thing but now just not check run install scripts.
To my amazement it still runs the install scripts???
Now I have 3 application showing in the browser and still only 1 in sql developer
Final problem with sql developer is that I choose to drop dashboard(101) it only deinstalls the application. It does not run the deinstall script for supporting objects included in dashboard(101).
All this makes an easy deployment a real hassle, since the browser interface can't handle a run only apllication with supporting object as all (it simply doesn't run the install script) I need to use sql developer, which is then fine for the first install, but then doen't upgrade properly. Finaly deinstalling a run only application again is impossible from a workspace and does work from sql developer, but then you still have to do the deinstall of the db objects manually.
I know as an apex admin I can work arround al this by switching the build status etc etc, but then again I can do anything if I'm apex admin and db sys.Point in having a single file deployment is allowing a novice user to easily install.
Geert

Hi Scott
Thanks for the reply
sspadafo wrote:
Run Only applications don't show up in the application list because they should not be editable. But perhaps it could display an icon indicating that.In my opinion they should and they do. The single app that is appearing in the list in sql developer is run only. Having it here allows me to select drop amongst other functionality the browser interface currently still lacks. Even when I drop all apps and than reinstall them again it seems like I can only see 1 version of an app with the same name.
sspadafo wrote:
The problem you described where you can't use the Application Install wizard to install supporting objects if the application is set to Run Only should be fixed in the upcoming 3.1.2 release/patch.I've installed the patch and I'm afraid the patch is no good either. Indeed is has improved. After the app installs it shows the supporting object dialogue. But if you then select yes and press Next it does absolutely nothing and redirects tot the application showing Application not available for edit.
So if you would be so kind to reopen bug 7286162
So while I'm on this section in my opinion the following bugs exist/features are missing
SQL Developer interface
# Not all application for parsing schema are shown in connection explorer. It seems like it can multiple show apps with different names only not when you install the same app twice with different app_id's. Then it only show the lowest app_id.
# Installing runonly app with supporting objects installs supporting object regardless of option selected
# Installing runonly app with upgrade scripts ignores update scripts and runs install scripts regardless of "install supporting objects" checkbox's state
# De installing app shows unpredictable behaviour for running deinstall scripts. It seemingly prompts random. Sometimes it does, sometimes it doesn't. When it does show I get behaviour like initially prompting for running deinstall script, failing to run deinstall script, causing neither app or objects to be dropped, on retry not showing prompt anymore and only dropping app.
Browser interface
# Installing a runonly app always finishes with a white page showing only Application not available for edit instead of showing a proper installation summary
# Installing a runonly app still prevents installation of supporting objects
# De installing a runonly application is not possible. Possible a button for de install could be included on page 4000:733
# Unable to perform important application level task from workspace like changing status, alias, global notification, proxy \\ (which are all available in the sql developer interface and imho could all be added to page 400:733 of the browser interface)
Hope this helps,
Geert

Application Import : MENU's are LOST

Hi,
We have a problem where we have exported an Application & imported it to a diff. box with same config.(10g/Linux)
All the MENU Ref. to the REGION is LOST ..it shows something like : M1816729359141287, Instead of the "MENU: Task" Name ...
Please HELP.This is a very serious problem. Did anybody faced this ?
Thanks
Sandeep

Sandeep,
I'm not sure what's going on. If you don't change application IDs, the menu regions should not have this problem (it turns out that even changing workspace IDs does not cause a problem).
I tried this on the production version of HTML DB on htmldb.oracle.com by creating an application with a menu and a page with a menu region. I exported the application and then re-imported and installed it using the same application ID. It works fine.
Are you using the import/install pages or SQL*Plus to import/install? You might try the SQL*Plus method if you have not yet tried it. Simply connect as the application schema used by the application and run the application export file.
Scott

Specifying character set on application import

hi --
I'm running into a problem that I think has to do w/ character sets.
I'm using non-breaking spaces in numerous LOVs; they're entered in as ALT +0160 on the keypad. These non-breaking spaces work great in the development environment of APEX (eg in the development app), and now I need to export/import the app to a production environment, which is runtime only.
The NLS_CHARACTERSET on both the development and production databases is US7ASCII.
When I import the app into the runtime installation of APEX I simply run the export file in sqlplus as the schema user.
(It has been scp'd over, as a text file, from the development server.)
The application imports and runs fine, but the non breaking spaces are displayed as garbage characters.
I did some testing on apex.oracle.com. I noticed that when I specify character set of unicode utf-8 on import,
the non-breaking spaces work properly. When I specify US-ASCII, I get the same garbage I'm getting in
my production environment.
When I export the app from the development environment, the character set is fixed (cannot be changed) to unicode utf-8. But I'm not doing anything to set the character set on import (don't know that I can...), and I wonder if it's adopting the database default character set of ASCII.
How can I get the imported app to use the desired character set? Am I going to have to convert this to a development
environment just so I can specify the character set on import, or is there a way to do it in sqlplus?
I'm not entirely sure I'm on the right track... but maybe someone has ideas how to get these non breaking spaces working in the production environment.
If access to my workspace on apex.oracle.com would be helpful, let me know.
Thanks,
Carol

I forgot to mention that, from what I've recently read, ASCII does not have a representation for non breaking spaces... so the behavior I'm experiencing is at least consistent with that...

Aperture 3.2.1 Import problems.

Aperture 3.2.1 Import problems. I can not import. Complete system hang when I try. Have to force reboot. I made a new user and everything seems to work fine under that user. I must have something conflicting in my admin user but I have had no luck finding it. I have tried rebuilding the library (all three options) but to no avail. Aperture will run fine as long as I do not try to import. This is very frustrating, any help would be greatly appreciated.
27" imac 3.06 intel core 2 duo 12 GB Ram

Hello Tim,
If a problem only occurs when working from one account, then very often faulty user preferences or presets are the cause. Try to remove your user preference file, and if that should not suffice, move your presets to the desktop, as described in the Aperture 3: Trouble Shooting Basics:
(Caution: I see, you are running Lion: Because of Lion's non-preemptive Process Management you can never be sure if an application really has quit, even if it looks in the Dock as if the Application has finished. So it is very important to log off, before you launch Aperture again, after you changed something in the libraries like described below.)
Delete the user preferences
You can resolve many issues by restoring Aperture back to its original settings. This will not impact your image files or your library. To reset your Aperture user preference settings to their original state, do the following:
Quit Aperture.
In the Finder choose Go to folder from the Go menu.
Type~/Library/Preferences in the "Go to the folder" field. Press the Go button.
Remove the "com.apple.Aperture.plist" file from the Preferences folder. (and log off and log in again!)
Move the user created presets, keyword lists, and so on...
Quit Aperture.
In the Finder choose Go to folder from the Go menu.
Type~/Library/Application Support/Aperture in the "Go to the folder" field. Press the Go button.
Move the contents of this folder to your Desktop (and log off and log in again!)
Start Aperture and see if the issue is resolved. Note: Permanently removing these files will delete presets, metadata sets, keyword sets, and so on. If moving these files to the Desktop does not resolve the issue, move them back to their original location to restore the presets, adjustment chain presets, and metadata sets. In no case will removing these files affect metadata, keywords, or adjustments already applied to images.
If none of this should help, try to boot into safe mode (hold down shift after the start up chime), to see if you have conflicting plugins or video drivers etc. installed in your admin library.
HTH
Léonie

CS5 Windows import problems (ppj, avi)

I have the CS5 Master Collection installed on a Windows 7 Ultimate 64-bit laptop. I have some old Premiere 6.5 projects that I wanted to open/import.
When I first tried this, I could open the ppj files and make prproj files from them, either by double-clicking on the ppj file name or by importing the ppj in to a new prproj, but the video files within the ppj didn't import properly. Premiere Pro CS5 said, "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." These video files are paired avi and wav files captured from mini-DV tape using Premiere 6.5 under Windows XP Pro. A sample check of one of my avi files with GSpot includes these results:
The codec section says (among other stuff)
     codec: dvsd
     Name: DVC/DV Video
     Status: Codec(s) are Installed
The container section says
     File length correct
     DV Type 2 AVI
     OpenDML (AVI v2.0)
     DV Audio/Video: 748 MB (97.63%)
     AVI Overhead: 18.1 MB (2.37%)
When I tried more recently, Premiere CS5 does not include ppj under "All Supported Media" in the import dialogue box. I can open Bridge from Premiere and browse to a ppj file, but when I double-click the file name, I get the error message, "File format not supported." If I try to open the ppj directly rather than import it, instead of trying to run a conversion as it did initially, Premiere CS5 gives me the welcome to Adobe Premiere Pro popup without actually doing anything w/ the ppj. I'm not sure whether a Premiere update ran between the first and more recent attempts to import ppj files, but I now have version 5.0.3.
Does anyone have suggestions for how to make this work?
Thanks.

I had the same problem with an old ppj project.
The option to import was available pbut CS5 would crash when import was invoked.
There was an error message about video filters.
Adobe help line, over the course of an hour, tried to make me believe that this was related to the 64 bit vs 32 bit issues.
Then I pointed out to them that the application was able to read the .avi file and play it if I imported it by itself without trying to import the whole project.
I also mentioned that deleting the previews made no difference.
At the end of the hour, they agreed to look at the project file. This was two weeks ago and this is the last time that I heard from them. When I ftp'ed the file to them they confirmed the following which I also told them; this is a separate problem from the import problem, but it is related to the support of this software. The automatic updates to the program cause Adobe .ppj import options to disappear from the import menu file type list. Again, they confirmed this and I had to unistall the whole package, reinstall Adobe, and not accept any updates.
I have yet to hear from Adobe on this. I suspect this is such a rare need that they feel they don't need to support it, but this being the case I think the doofs ought to take the feature out of the advertising list, or provide a stand alone utility to translate the text .ppj into a .prpj compatible project. It's not very difficult.
The most disturbing thing is that they obviously fail to do a thorough regression test prior to publishing updates. Basic features that are advertised are failing.
THE SOLUTION (for my case)
Of course, the reason I wanted to import the project was because there was aOne of the key reasons to stay with Premiere is that I am used to it and want compatibility, as the others in this post also would like.
Besides Adobe being of no help at all, I have found a workaround. As you all know the ppj file is a text file with headers in [ ] brackets. This file contained some headers which did not appear in .prpj created projects and this was due to some special effects add-ins which were bundled with the video card I installed in the old system.
By removing the special effects using the old version of Premiere installed on a 32 bit system, I was able to import all the clips with the NLE cuts as I intended, and continue from there in CS5.
I hope this is a viable workaround for some.
I do not know if Adobe plans to continue to support the import feature, but they ought to update their docs. It does not work.
Edwin

HD Import Problems

I recently purchased a Canon HV 20 HD Camcorder. Picture quality and playback from the camera is excellent. However I have had a few problems following import of HD footage to my computer with IMovie 06 HD. Most of the footage is fine, however a few scenes get very choppy and do not run smoothly (compared to direct playback from the camera). Also some scenes have distorted sound, it sounds like the speech is lowed down. I have all the latest updates installed for IMovie.
Anyone else had similar problems?

Hi Tim and others on this thread.
Having raised a few hares, I felt duty bound to take another look at this problem.
I dug out a master tape of my last 1080i HD project and which contained two clips with distorted sound. They were the last two clips of a 60 minute recording on a 63 minute tape and were, respectively, 13.5" and 47" long. They played fine in the camcorder and I have now discounted the camcorder and tape as a possible cause of the problem, following further testing in iMovie 6.
I connected the camcorder to main power, then connected it via Firewire to the iMac, switched the camcorder to Play/Edit, and then opened a new imovie project(1080i PAL). I imported the last 4 minutes of the tape including the problem clips. The clips imported at half speed which is normal for my 1.8GHz CPU and shortly after I was able to preview in real time.
The two problem clips still had distorted sound and the preceding two clips had no problem when reviewed in the Clips pane preview.
I then highlighted the problem clips and dragged them simultaneously into the Timeline. The sound problem disappeared-they both played fine. I dragged them back to the clips pane and the problem reappeared.
I then tried dragging them back to the Timeline and that seemed too much for iMovie 6. Sometimes a clip would work, then only one clip, then I lost sound altogether on the second clip,etc. Once you go beyond a certain point iMovie 6 will just become impossible.
Quitting iMovie and then reopening the project got one clip to work temporarily but clearly is not a solution.
Apple`s suggestions to conserve power when in HD by turning off Show Audio Waveform in View did nothing and neither did their other suggestion of deselecting Keep Playhead Centred in Playback Preferences. Neither did their suggestion to Repair Permissions. I had already tried their other suggestions of defragmenting my drive and there is now little more I can do to improve the performance of my computer.
What did get me back on track was to close iMovie>ditch the iMovie preferences plist(Home>Library>Preferences)>re-open iMovie. The other thing that worked was your idea Tim of extracting the audio of both clips, and in fact this seemed to be the most lasting solution. However, starting with dragging both clips from Clips Pane to Timeline might prove better than either-I still do not know whether dragging them together was what what did the trick. Of course, it might be necessary to do all three if problems persist.
Because I had confused iMovie with all this messing around, I ran DiskWarrior to tidy things up. No major problems were reported but this application does not report all the corrections it makes. Thus it sorted out a previous problem I experienced with iMovie 6 when trying to use purchased music but I have no idea what changes it made.
My revised conclusion is that we may all need a lot more power in the CPU when editing high definition in iMovie 6. For example, the new 24" iMac G5 has the equivalent of double the power of my current iMac.
David Babsy, a frequent contributor to these forums often mentions that most of his problems disappeared with a more powerful computer. You only have to see how things dramatically slow down in iMovie 6 when reaching the end of a big high definition movie edit to appreciate the need for more power.
Obviously we still need extra RAM and also a big hard drive to cope with the vastly bigger files that HD needs.
But power, memory and storage are, I now think, not the full answer. There is a bug or a series of bugs still to be resolved in iMovie 6 if it is to be truly stable. I include importing problems with HD in that list.
I still think iMovie 6 is fantastic, even on my underpowered iMac.
Apologies for previously confusing the issue with camcorder/tape issues.
The problem clips are still working in iMovie as I post this.

On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

No. You have no alternative but to plug it into a computer running iTunes and restore it.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Final Cut Pro/GY-HD111E import problems?

Final Cut Pro/GY-HD111E import problems?
With a brand new Mac Pro and very latest Final Cut Studio complete with updates I'm having a little problem trying to import footage directly from a JVC GY-HD111E (yes I'm in PAL land, UK) via FireWire into FCP.
Footage is 720p/25p and timeline is set up in FCP that way.
I'm doing a 'capture now'. The first clip I'm trying to import is about 45 minutes long with no cuts/breaks whatsoever.
What happens is after about 60 seconds or so, it FCP automatically breaks the clip for no reason and starts a new one, trouble is, when it does this I lose about 4 seconds of footage at that point.
It continues to break clips randomly, sometimes after 40 seconds or so, sometimes after 95 seconds, but usually between 30 seconds and 2 minutes and each time it starts a new clip I lose between 1 and 6 seconds.
As I say, there are zero breaks or cuts in this clip, I have a 45 minute clip that was shot in one take, not even a pause anywhere.
Is this a JVC issue or a Final Cut issue?
It's a pain as it simply means I can't import my 9 hours of footage hence I can't get on with this project.
Any ideas why this phenomenon is happening?
Thanks guys.

I mean I get the same errors.
Let me explain again.
There are NO start/stop/pauses in this clip.
I'm trying to import just ONE clip with no breaks, again, there are NO start/stop/pause, it is one continuous clip of 15 minutes duration.
The JVC creates some sort of errors at the Firewire output stage, it drops frames or other errors, FCP gets confused and creates a new clip, even though it is the same clip, but due to the GoP structure, it looses a few seconds too hence I can't import the footage as I keep loosing bits here and there mid clip. It is randam, every 30 to 100 seconds or so it will do this.

Application Builder problem on one server but not another

I am having an Application Builder problem. When I get into App Express and go inside the builder and try to edit a listed application, I get an “http 404 the page cannot be found. The page might have had its name changed or is temporarily unavailable” situation. I can get into SQL commands, utilities, and administrative activities. I can also run the application. Also, if I go onto a different server with App Express on it, I can get into the builder and edit applications with no trouble. Our DBA had the server in question rebooted a little over a week ago and that took care of the problem for a couple days. Any ideas? Is this an Express problem or a server problem? He had also tried restarting Express before he had the reboot done and that didn’t help.
Thank you for any help.
Cordially,
Robert J. Smith

I have messages from the Apache error log files from the dates I was getting the builder error. For future reference, I will post them below. The builder has been working fine lately.
Robert Smith
** error log messages follow **
[Mon Jul 16 07:25:12 2007] [error] [client 147.159.5.134] [ecid:
79143788610,1] File does not exist:
/app/oracle/oraappsrv10g/forms/java/java/awt/KeyboardFocusManager.class
[Mon Jul 16 07:25:12 2007] [error] [client 147.159.5.134] [ecid:
79143788611,1] File does not exist:
/app/oracle/oraappsrv10g/forms/java/java/awt/event/MouseWheelListener.class
[Mon Jul 16 07:25:13 2007] [error] [client 147.159.5.134] [ecid:
83438757083,1] File does not exist:
/app/oracle/oraappsrv10g/forms/java/oracle/forms/registry/default.dat

Application Importing Problem??

Similar Messages

Maybe you are looking for