Application Install On Laptop Off Network

I deploy an application to a number of users most of which have laptops they take home every night. They are configured in an appropriate boundary group. If the client downloads the policy prior to the end of the day and the user takes the device
home at night will the install still occur? I believe the client can act independent of the management point. What if I set it to run from a distribution point?

The client always acts independent from the MP. It connects to the MP every 60 minutes (by default) to retrieve its policy, nothing more. Enforcing that policy, including deployments, is completely independent from any communication with the MP.
Of course, enforcing a deployment typically also involves content so if the client does not have access to a DP with the content or has not cached the content locally (which it will do only for required deployments at their available time), then it won't
be able to successfully enforce the deployment. If the package is set to access the content directly from the DP, same, thing, it won't be able to enforce it which is why using that setting is generally not recommended (in addition to wasting disk space).
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

  • I have a mountain lion 10.8.5 version installed on my 2012 Macbook air but there is no Wireless Network application installed. Can anyone advise me how to fix this or get it installed, thanks.

    I have a mountain lion 10.8.5 version installed on my 2012 Macbook air but there is no Wireless Network application installed. Can anyone advise me how to fix this or get it installed, thanks.

    thank you Eric/Joe, what I actually was looking for is wireless diagnostic utility not the wireless diagnostic assistant as per your advise but have found the resolution right here http://support.apple.com/kb/HT5606

  • Need help .. 4g usb modem .. application installed but cannot detect the usb modem .. mobily network interface installed but cannot detect the unit

    need help .. 4g usb modem .. application installed but cannot detect the usb modem .. mobily network interface installed but cannot detect the unit

    When you contacted the modem manufaturer what did they have to say?

  • Why wont hp movie store powered by roxio now application install on my laptop

    why wont HP MOVIE STORE powered by ROXIONOW APPLICATION install on my laptop? it downloads but wont install.

    Davesatt99, welcome to the forum.
    When requesting help you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
    There can be many reasons for this happening.  The may be another version on the computer, for example.  There may be a conflict with one of the components, also.  Once we know the OS we can look at the situation more closely.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Applications installed in my iTouch does not launch. the music and internet functions but the installed applications does not. tried switching it on and off, still problem persists

    Applications installed in my iTouch does not launch. the music and internet functions but the installed applications does not. tried switching it on and off, still problem persists. help...

    Your only chance besides getting it serviced would be setting it up as new device:
    http://support.apple.com/kb/HT4137

  • "Not Responding" when opening Captivate v4 off network

    My work laptop was re-imaged with Windows 7 last week.  IT reinstalled my Technical Communicator Suite.  Captivate works fine when connected to the network.  However, off network is another story.  The rest of the suite also works off network.  I have installed the updates, changed compatibility, verified the application is installed on my C drive.  On my last test attempt, I received a Runtime error 217 @004P5C78.  Any ideas on what to try next?  Thanks!

    Hi Rick,
    I only get this sort of delay with Captivate.
    I have turned off the "auto update" checker option some time ago, so now I wonder if it is possible to turn off the area you highlighted...the flash gizmo that checks the Adobe server?
    I reckon that is what is causing the problem.
    If it cannt be turned off, then I will have to ask my IT (unhelpful) help desk to take a look "behind the scenes" to see what is happening and where the blockage is....but I know already where that will get me.
    Cheers,
    Noel

  • Problems with Installing iTunes and wireless network connection

    Every time I attempt to install iTunes it completely kicks the internet off and an error comes up that the wireless network adapter to not connect or is not detected. My internet service is connected to a router which I receive wirelessly to my laptop. I do not understand why it is happening and to get the internet to work again I needed to do a system restore. Any ideas why this is happening. Also when iTunes was installed it came up correctly, it would just not connect to the net. I have had a previous version on my old laptop but since purchasing this new laptop I am having such difficulty. On another note, if this problem can be resolved, once iTunes is working is there a way to get the songs from my old computer onto the new? Thanks for the help in advance!

    I just saw your post and I resolved this on mine for my wired connection. I'm willing to bet that the issue is the same for wireless. Here's what I found.
    Issue:
    During the installation, iTunes installs some network components related to mobile device support over ethernet(Apple Mobile Device Ethernet Service - netaapl.inf). At the same time, according the logs, the install process removed OEM18.inf. This almost exactly coincided with the time that I saw the network connection die (preceded it by a few seconds).
    Basically, iTunes appears to be removing a required network component.
    Resolution:
    After installing iTunes and the network connection breaking, remove the network device from Device Manager and allow Windows to reinstall it automatically.
    The following instructions are for Windows 7, but they are close enough to follow for other versions of Windows.
    1. Click the Start button (Jewel in Vista and Win7).
    2. Right-click Computer and click Manage in the menu that appears (type your password or click Yes if prompted).
    3. On the left side of hte Computer Management window, click Device Manager.
    4. Click the arrow (or plus sign) next to Network Adapters to expand that section.
    5. Right-click your network adapter and click Uninstall in the menu that appears.
    6. Click OK.
    7. Reboot.
    Windows should automatically detect and reinstall your network device on boot.

  • [Mobile Acc.] VERY slow logout when login on network AND logout off network

    Hello,
    I'm installing a macmini server (10.6.6) and want to use mobile user account.
    I thought everything was fine so I tried to login and logout with my macbook pro (Snow Leopard).
    Unfortunately I detected a pb :
    - When I login on network and logout on network everything is fine
    - When I login off network and logout off network everything is fine
    - When I login on network and try to logout off network, the login is fine but the logout needs about 20 minutes!
    I found in the console that the macbook is waiting to re-connect the afp share points.
    How can I avoid that?
    Thanks in advance
    Extracts from the console :
    20/03/11 17:43:00 kernel AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    20/03/11 17:43:01 configd[14] network configuration changed.
    20/03/11 17:43:01 configd[14] setting hostname to "MacBook-Tom.local"
    20/03/11 17:43:05 KernelEventAgent[404] tid 00000000 received event(s) VQ_NOTRESP (1)
    20/03/11 17:43:05 KernelEventAgent[404] tid 00000000 type 'afpfs', mounted on '/Volumes/Users', from 'afp_4FLpM10E8KV40NIHSB2mlMQZ-1.2f00000f', not responding
    20/03/11 17:43:05 KernelEventAgent[404] tid 00000000 type 'afpfs', mounted on '/Volumes/Groups', from 'afp_4FLpM10E8KV40NIHSB2mlMQZ-2.2f000010', not responding
    20/03/11 17:43:05 KernelEventAgent[404] tid 00000000 found 2 filesystem(s) with problem(s)
    20/03/11 17:43:05 kernel ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xbca3e58
    20/03/11 17:43:05 kernel AFP_VFS afpfs_DoReconnect started /Volumes/Users prevTrigger 0 currTrigger 1
    20/03/11 17:43:05 kernel AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Users
    20/03/11 17:43:05 kernel AFP_VFS afpfs_DoReconnect: posting to KEA EINPROGRESS for /Volumes/Users
    20/03/11 17:43:05 kernel AFP_VFS afpfs_DoReconnect: Max reconnect time: 600 secs, Connect timeout: 0 secs for /Volumes/Users
    20/03/11 17:43:05 kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Users
    20/03/11 17:43:05 kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/Users failed 65.
    20/03/11 17:43:05 kernel AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and then try again
    20/03/11 17:43:05 kernel AFP_VFS afpfs_DoReconnect started /Volumes/Groups prevTrigger 0 currTrigger 1
    20/03/11 17:43:05 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:06 KernelEventAgent[404] tid 00000000 type 'afpfs', mounted on '/Volumes/Users', from 'afp_4FLpM10E8KV40NIHSB2mlMQZ-1.2f00000f', not responding
    20/03/11 17:43:06 KernelEventAgent[404] tid 00000000 type 'afpfs', mounted on '/Volumes/Groups', from 'afp_4FLpM10E8KV40NIHSB2mlMQZ-2.2f000010', not responding
    20/03/11 17:43:06 kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Users
    20/03/11 17:43:06 kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/Users failed 65.
    20/03/11 17:43:06 kernel AFP_VFS afpfs_DoReconnect: sleep for 2 seconds and then try again
    20/03/11 17:43:06 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:07 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:08 kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Users
    20/03/11 17:43:08 kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/Users failed 65.
    20/03/11 17:43:08 kernel AFP_VFS afpfs_DoReconnect: sleep for 4 seconds and then try again
    20/03/11 17:43:08 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:09 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:10 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:11 KernelEventAgent[404] tid 00000000 received event(s) VQ_NOTRESP (1)
    20/03/11 17:43:11 KernelEventAgent[404] tid 00000000 type 'afpfs', mounted on '/Volumes/Users', from 'afp_4FLpM10E8KV40NIHSB2mlMQZ-1.2f00000f', not responding
    20/03/11 17:43:11 KernelEventAgent[404] tid 00000000 type 'afpfs', mounted on '/Volumes/Groups', from 'afp_4FLpM10E8KV40NIHSB2mlMQZ-2.2f000010', not responding
    20/03/11 17:43:11 KernelEventAgent[404] tid 00000000 found 2 filesystem(s) with problem(s)
    20/03/11 17:43:11 [0x0-0xe20e2].com.skype.skype[2793] WirelessAttach: IOServiceOpen error: e00002c7
    20/03/11 17:43:11 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:11 kernel AFP_VFS afpfs_DoReconnect: posting to KEA EINPROGRESS for /Volumes/Groups
    20/03/11 17:43:12 kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Users
    20/03/11 17:43:12 kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/Users failed 65.
    20/03/11 17:43:12 kernel AFP_VFS afpfs_DoReconnect: sleep for 8 seconds and then try again
    20/03/11 17:43:12 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:13 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:14 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:15 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:16 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:17 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:18 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:19 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:20 kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Users
    20/03/11 17:43:20 kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/Users failed 65.
    20/03/11 17:43:20 kernel AFP_VFS afpfs_DoReconnect: sleep for 10 seconds and then try again
    20/03/11 17:43:20 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    20/03/11 17:43:21 kernel AFP_VFS afpfs_DoReconnect: reconnect already in progress for /Volumes/Groups, going back to wait
    *...again and again and again...*
    20/03/11 17:53:10 KernelEventAgent[404] tid 00000000 received event(s) VQ_DEAD (32)
    20/03/11 17:53:10 KernelEventAgent[404] tid 00000000 type 'afpfs', mounted on '/Volumes/Users', from 'afp_4FLpM10E8KV40NIHSB2mlMQZ-1.2f00000f', dead
    20/03/11 17:53:10 KernelEventAgent[404] tid 00000000 found 1 filesystem(s) with problem(s)
    20/03/11 17:53:10 KernelEventAgent[404] tid 00000000 type 'afpfs', mounted on '/Volumes/Groups', from 'afp_4FLpM10E8KV40NIHSB2mlMQZ-2.2f000010', not responding
    20/03/11 17:53:10 loginwindow[2705] AFP error -1 mapped to EIO
    20/03/11 17:53:10 kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Users
    20/03/11 17:53:10 kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/Users failed 65.
    20/03/11 17:53:10 kernel ]
    20/03/11 17:53:10 kernel AFP_VFS afpfs_DoReconnect: posting to KEA to unmount /Volumes/Users
    20/03/11 17:53:10 kernel ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 1 on so 0xbca3e58
    20/03/11 17:53:10 kernel AFP_VFS afpfs_DoReconnect started /Volumes/Users prevTrigger 1 currTrigger 2
    20/03/11 17:53:10 kernel AFP_VFS afpfs_DoReconnect: already in unmount /Volumes/Users
    20/03/11 17:53:10 kernel AFP_VFS afpfs_unmount: /Volumes/Users, flags 524288, pid 404
    20/03/11 17:53:10 kernel AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Groups
    20/03/11 17:53:10 kernel AFP_VFS afpfs_DoReconnect: Max reconnect time: 600 secs, Connect timeout: 0 secs for /Volumes/Groups
    20/03/11 17:53:10 kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Groups
    20/03/11 17:53:10 kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/Groups failed 65.
    20/03/11 17:53:10 kernel AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and then try again
    20/03/11 17:53:11 kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Groups
    20/03/11 17:53:11 kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/Groups failed 65.
    20/03/11 17:53:11 kernel AFP_VFS afpfs_DoReconnect: sleep for 2 seconds and then try again
    20/03/11 17:53:13 kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Groups
    20/03/11 17:53:13 kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/Groups failed 65.
    20/03/11 17:53:13 kernel AFP_VFS afpfs_DoReconnect: sleep for 4 seconds and then try again
    20/03/11 17:53:17 kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Groups
    20/03/11 17:53:17 kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/Groups failed 65.
    20/03/11 17:53:17 kernel AFP_VFS afpfs_DoReconnect: sleep for 8 seconds and then try again
    20/03/11 17:53:25 kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Groups
    20/03/11 17:53:25 kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/Groups failed 65.
    20/03/11 17:53:25 kernel AFP_VFS afpfs_DoReconnect: sleep for 10 seconds and then try again
    20/03/11 17:53:35 kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Groups
    20/03/11 17:53:35 kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/Groups failed 65.
    20/03/11 17:53:35 kernel AFP_VFS afpfs_DoReconnect: sleep for 10 seconds and then try again
    *...again and again and again...*
    20/03/11 18:03:05 kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Groups
    20/03/11 18:03:05 kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/Groups failed 65.
    20/03/11 18:03:05 kernel AFP_VFS afpfs_DoReconnect: sleep for 10 seconds and then try again
    20/03/11 18:03:15 KernelEventAgent[404] tid 00000000 received event(s) VQ_DEAD (32)
    20/03/11 18:03:15 KernelEventAgent[404] tid 00000000 type 'afpfs', mounted on '/Volumes/Groups', from 'afp_4FLpM10E8KV40NIHSB2mlMQZ-2.2f000010', dead
    20/03/11 18:03:15 KernelEventAgent[404] tid 00000000 found 1 filesystem(s) with problem(s)
    20/03/11 18:03:15 loginwindow[2705] AFP error -1 mapped to EIO
    20/03/11 18:03:15 loginwindow[3291] AFP error -1 mapped to EIO
    20/03/11 18:03:15 kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Groups
    20/03/11 18:03:15 kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/Groups failed 65.
    20/03/11 18:03:15 kernel ]
    20/03/11 18:03:15 kernel AFP_VFS afpfs_DoReconnect: posting to KEA to unmount /Volumes/Groups
    20/03/11 18:03:15 kernel ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 2 on so 0xbca3e58
    20/03/11 18:03:15 kernel AFP_VFS afpfs_DoReconnect started /Volumes/Groups prevTrigger 2 currTrigger 3
    20/03/11 18:03:15 kernel AFP_VFS afpfs_DoReconnect: already in unmount /Volumes/Groups
    20/03/11 18:03:15 kernel AFP_VFS afpfs_unmount: /Volumes/Groups, flags 524288, pid 404
    20/03/11 18:03:17 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[3713] Login Window Application Started
    20/03/11 18:03:17 com.apple.ReportCrash.Root[3706] 2011-03-20 18:03:17.458 ReportCrash[3706:2903] Saved crash report for loginwindow[3291] version ??? (???) to /Library/Logs/DiagnosticReports/loginwindow2011-03-20-180317localhost.crash

    Thanks to try but I'm not in this case.
    Note that the pb appears only on logout.

  • HT5381 I am running Snow Leopard 10.6.8 and attempting to upgrade to Mavericks....installation completes and a message appears stating that my computer will restart in x seconds.  I then get a message "Application install OS X Mavericks failed to quit". A

    IMac upgrade from Snow Leopard 10.6.8 to Mavericks errors by failing to restart computer........after install message states that "your computer is restarting in x seconds"...then window appears that "application install OS x Mavericks failed to quit"...try to log out again, quit install OS x Mavericks and choose apple menu to log out...........this does not work!

    Are you running OS X Server (the forum this question was posted in), or are you running OS X?  If you're not sure what that difference is and why I'm asking it, then you're probably running OS X and are very likely not running OS X Server here.
    Hopefully you have a pre-upgrade backup of your data, on the off chance something has either already gone badly wrong already, or if something goes wrong with the following...
    To force the quit here and to force the shutdown here, press and hold the power button for ~10 seconds.
    If you don't have a backup already and if the box doesn't reboot, then you'll want to boot from the 10.6 DVD (of OS X or OS X Server) and create a backup — it won't be a particularly good backup of the OS X or OS X Server system, but at least you'll have access to your own files and related data.  This backup because recovering from a badly-failed upgrade might involve reinstalling OS X.

  • I updated my OS from 10.6.4., to 10.8.2 I want to buy iDVD and I Movie, but bought iPhoto and can't get it to work yet.  Hesistant to buy the others without now having the original applications on my laptop. Do I need to buy the older versions first?

    I updated my OS from 10.6.4., to 10.8.2.  I want to buy iDVD and iMovie, but I bought iPhoto and can't get it to work yet.  I'm hesitant to buy the others without now having the original applications on my laptop. Do I need to buy the older versions first?  They are probably on my Snow Leopard install disc, but I am now running Mt Lion that I bought, and downloaded a few days ago...so I don't want to insert the old OS disc, thinking it might want to reinstall the old OS...  Thanks,
    KathyH-P

    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

  • My husband(less technologically inclined than I am), decided to delete programs from our iMac, now it has a grey screen and won't get past it. If I insert the Application Install DVD, to repair the disk, will I loose all my pictures and music?

    My husband(less technologically inclined than I am), decided to delete programs from our iMac, he turned it off and now it has a grey screen and won't get past it. It won't start in safe mode and when I  If I insert the Application Install DVD, to repair the disk, will I loose all my pictures and music?

    With a corrupt disk, the install procedure is most likely going to fail.
    How old it the disk?
    You might be able to reformat it to fix the problem. Of course that means you lose all of your data.
    The other alternative is to get a new disk drive and put that in your Mac and install OS X
    Then put the old disk drive in an enclosure and see what can be recovered from it.
    Allan

  • Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the n

    Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the network. what have you done with your phone moym ?! solve all these problems! I beg of you!

    Hello. after updating to Ios 8 my iPhone is terribly! Discharged very quickly, many transitions between applications, the program takes off, ringtones do not work - works a standard call, the keyboard freezes, bad messages are sent, often loses the network. what have you done with your phone moym ?! solve all these problems! I beg of you!

  • Problems with applications installed in my E61i

    Hi all,
    I have encountered a problem that is whenever I off my phone and turn it back on, all third-party applications installed in my memory card don't work anymore except those installed in the phone memory, and I have to re-install everything every time it happens. I have tried formating my memory card and reinstall everything but the problem still persist. Any advice?
    Thank you.
    LAW84

    When you restart the phone does it say at startup:
    installing the application?

  • How to do mass installation of MAM applications on to Laptops

    Hi All,
    Is there any simple procedure to install MAM 3.0 applications on to Laptops. We need to install and configure the Mobile applicationss on more than 300 Laptops. Is there any better method which helps us achieving this quickly.
    Appreciate your help.
    SAP MI Client: 7.0 with SP 15
    NW: 7.0
    MAM 3.0 with SR05
    Backend: ERP 2005.
    Thanks and Regards,
    Ameer

    HI
    i have been through some material where he is saying that MAM 3.0 works fine with MI7.0 SP18.
    and for information about the implementation plese refer this link
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/xmam%252bclient
    and refer the release note-----1046823 - Release restriction note SAP Mobile Asset Management 3.0 SR4
    and For more information on xMAM 3.0, please refer to the xMAM Master Guide from the SAP Service Marketplace at http://service.sap.com/instguides under Installation & Upgrade -> SAP xApps -> SAP xApps for Mobile Business -> SAP xMAM -> SAP xMAM 3.0.
    Regards
    Manohar

  • Phaser 3250DN drops off network after printing one or two pages

    I have a Phaser 3250DN printer that has started dropping off the network after switched on and printing one or two pages.  If I power cycle the printer, it comes back online, but then drops off the network again almost immediately so I can't print any more pages.  The printer fails to respond to pings while in this state.  The printer is 4 years old but has had >extremely< light usage.  We've printed about one thousand pages total and is only turned on when we want to print something so most of the time it's physically powered off.

    Network drop-offs can occur for a variety of reasons and be triggered by a variety of causes. You may want to make sure you are using the latest software release on the product, as well as check the network firewall configuration settings. In addition, sometimes disabling unused networking protocols can reduce traffic the device is exposed to and ease the burden if traffic volume is what is shutting down the NIC.
    Another thing to consider would be the network topography itself; make sure the device is on a subnet exposed to minimal broadcast/multicast traffic.
    Finally, you can verify the device itself is physically functional by testing it with a laptop and crossover cable. If the drop-off behavior occurs while connected directly to another single computer, it may be indicative of an issue with the main board or hard drive.
    You may also find additional support articles at the following link: Phaser 3250 KB - http://www.support.xerox.com/support/phaser-3250/support/enus.html
    I hope this helps.
    Have a great day.

Maybe you are looking for

  • Report writer in third currency

    currently our special purpose ledger basic key figure only has local and group currency, can we add another currency for example document currency , the objective is to show three currency in our report writer report, is it possible? re-config summar

  • GR is not getting created??

    Hi PLease tell me that in my case, I am not able to do A GR for my PO.So what shall I do.Is it anywhere related to the material that I am using? Thanks

  • Illustrator CC crashes at launch

    Illustrator CC crashes when I launch.  All other Creative Suite products seem to be fine. Windows 7. Thanks!

  • Can't open .mpkg file

    I'm not sure what's gone wrong with my computer, but now all of a sudden, I can't dcouble-click a .mpkg file and have it open anymore. Also, there's a generic icon for them now. What am I missing?

  • Export to powerpoint not working for certain views

    Hi All, I am in the process of implementation of STVN 2.1 Pre EHP3 version of Nakisa OrgChart for one of my clients. During testing, it is observed that export to powerpoint object is not working for the following views. 1. Condensed Org. Chart 2. Co