Application is not automatically installed on iOS device.

Sorry for my English.
When I click Publish in Flash CC my application is not automatically installed on my iOS device.
What I do wrong?
This is AIR for iOS settings:

I'm tried to install IPA through adt.
Just typed in terminal:
adt -installApp -platform ios -package /path/to/my.ipa
IPA successfully installed to my iPhone.
I'm remove app and tried to publish in Flash CC again.
Now Flash CC automatically install IPA when I click Publish.

Similar Messages

Custom Afaria Client not getting installed on IOS devices

Hello,
I am using Afaria SP4 in my organization with no hotfix applied
I have created a custom Afaria Client App for IOS devices.
I am succesfully able to enroll my IOS devices and install the custom app during enrollment,when i am trying to hit the system tenant.
However,when i am trying to hit manually created tenants,enrollment is
done and also the device is under MDM control,but custom Afaria client app is not getting installed during enrollment.
I have attached the screenshot of the page where i have uploaded the ios afaria application in Afaria console.
The error that i can see in the icu logs while enrolling ios device in manually created tenant is as follows-
"The manifest for the app at
http://65.240.141.130:23003/ps2/ps.svc/Package/Content/0435A04B083AB0E663FE410BBFE7238D31E6B113/7de2f89d-6cdf-458d-a68c-0bb72e616c68/3/Virt.Def.App.plist
could not be validated"
Please guide to resolve the issue.
thanks and regards,
Jigar Salecha

I'm quite sure you need to set this up per tenant. Have you tried to upload the custom client to each tenant ?
BR
Peter

Windows does not automatically install legacy PCI device

I am using labview 8.5
I made an installer that includes both NI-VISA and the traditional(legacy) device drivers.
However, when I put in the card (PCI-6023E), windows Vista wasn't able to locate the drivers.
Is there a way to set it up so this is automatic? If not, what are the drivers called so I can manually select them from the hard drive?

According to this page, VIsta requires that you use DAQmx, not the traditional drivers, for the PCI-6023E. Last I heard the traditional DAQ drivers are not compatible with Vista, nor are there any plans to make them compatible with Vista.
Note: Switching to DAQmx will, of course, require you to change your code.
Message Edited by smercurio_fc on 09-23-2008 03:47 PM

TS1814 I have purchased iPhone 3g device from my friend, I connected it to the iTunes to upgrade from 3.1 to 6.0 as many softwares were not being installed as iOS was not up to date. I upgraded but now I can not activate my device. What I should do now???

I have purchased iPhone 3g device from my friend, I connected it to the iTunes to upgrade from 3.1 to 6.0 as many softwares were not being installed as iOS was not up to date. I upgraded but now I can not activate my device. What I should do now??? i am really feeling difficulty because i have been disconnected from the network.
I am from Pakistan.

The 3G cannot be updated to iOS6, it can only go to iOS 4.2.1.
Activation issues are generally the result of the device being hacked or jailbroken.

This advertised application will not be installed because it might be unsafe. Contact your administrator to change the installation user interface option of the package to basic.

Hi there,
I was wondering whether anyone could tell me which feature in Windows 7 produces this message "This advertised application will not be installed because it might be unsafe. Contact your administrator to change the installation user interface option of
the package to basic." and whether it can be turned off in Windows to prevent this message from appearing when installing certain programs that aren't WHQL certified. At first I thought it was the UAC control that generated this message but found out
that it wasn't and then thought it was the DEP control and found out that it wasn't this either. I'm only seem to be getting this message when installing FileDirector Component Service Version 3 on a few of our workstations which is an add-on that allows file
integration with Office and is part of FileDirector WinClient Version 3.
Your help would be much appreciated.
Many thanks,
RocknRollTim
P.S. I know of a way to bypass this message but would ideally not like to have the feature turned on and for the message not to be appear for non WHQL certified program installations in order to make non WHQL certified program installations in the future much
easier, more simpler and straightforward to carry out. I was redirected by a moderator off the Microsoft Community Forum.

Hi,
You can try following options to disable this prompt, but we don't recommend you to do so since this feature helps you to protect your computer.
Option 1: Run command as admin:
bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
Restart your computer to apply changes.
Option 2: Disable in GPO:
1.Type gpedit.msc in the Run dialog and press Enter.
2.In the Group Policy Editor, navigate to User Configuration → Administrative Templates → System → Driver Installation.
3.Double-click on Code signing for device drivers in the right-side pane as shown above.
4.In the windows that opens, choose Enabled. In the Options, choose Ignore as shown. Then click on the OK button to save the settings.
Restart your computer to apply changes.
Kate Li
TechNet Community Support
Unmarked as Answer based on OP's request.
https://social.technet.microsoft.com/Forums/en-US/35ab1279-c3a1-46be-9f7d-45e8606c1410/this-advertised-application-will-not-be-installed-because-it-might-be-unsafe-contact-your?forum=w7itproappcompat
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

When i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

when i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

Hi Kashmore,
Seems like the downloaded file was corrupt that could be because of either network restriction or the anti virus might have blocked it. My suggestion would be to try and download the product either by turning off the Antivirus or try a different network.
Cheers,
Kartikay Sharma

Trying to download the free trial of Adobe Acrobat XL Pro. I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author." I've repeatedly tried g

Trying to download the free trial of Adobe Acrobat XL Pro. I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author." I've repeatedly tried getting a new installer file, but get the same message every time.

K_don52 and Ande8135 please remove your current installation of the Adobe Download Assistant and reinstall. You can find more details in the known issues section of Troubleshoot Adobe Download Assistant.

Adobe Air I get this message: The application could not be installed because the installer file is damaged....

Every time I try to install new product through adobe air I get this message: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author. Kiran Kumar: May I have the product name and version you are referring to? I've looked over the online suggested repair which indicates to search for and delete Adobe Muse but when go looking for it, it doesn't seem to exist. How can I get this resolved?

Finally found a fix on my own....Wasted like 3 hours today. Hope this helps for anyone struggling with that stupid error message:

"Sorry, an error has occured. The application could not be installed because the AIR file is damaged

Hello-
I have an air application that is distributed via CDROM, the app is signed by a code signing certificate and timestamped. In mid-August when my certicate expired my users started calling stating that they couldn't install our product due to the following error: "Sorry, an error has occured. The application could not be installed because the AIR file is damaged. Try obtaining a new AIR file from the application author." From my understanding a timestamped application is taken at a point in time when it's generated so why would it matter if the certificate was still valid? I have since replaced the certificate and will need to redistribute to my (thousands of) users however when I test it out using a future date and time the same error occurs. Any information to help resolve this would be grately appreciated.

my command:
C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>adl
application.xml
C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>adt
-certificate -cn HelloW
orld 1024-RSA certHelloWorld.pfx password
C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>adt
-package -storetype pkc
s12 -keystore certHelloWorld.pfx HelloWorld.air
application.xml HelloWorld.html
password: password
C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>
And here is another link to download my code
http://www.megaupload.com/?d=JS3X2IVC
Thank you.

The application could not be installed...question

Hello !
I keep getting this error:
The application could not be installed because an application with that name already exists at the selected installation location. Try installing to a different location.
I have tried deleting everything and starting over and I have tried it in a different location but still nothing is working. any help I would appreciate so much.
Thank you !

Could you provide more details about the application you're trying to install, and some details about your compuer/OS.

Please help:error w/ adobe download assistant"application could not be installed because another..."

Application could not be installed because another application is already being installed. Please finish the first application before preceeding with this one". It says something like that. I hit the download button and then hit save. It downloaded something, but that was it. So I went back and hit "save and run" and this message appears. I am not sure how to run what I saved initially if that is even the problem. Please help. I need to use this program tonight - the trial of CS5 Extended. Thank you!

Have you tried restarting your computer? It is possible you have a pending update or even another piece of software being installed which is preventing the installation.

Air 1.51 installation failure. The application could not be installed because the AIR file is damaged

The error:
The application could not be installed because the AIR file is damaged. Try obtaining a new AIR file from the application author.
is generated when an AIR installation file is lauched from a Samba Network Drive in Vista Utlimate 64. If the install files are copied to a local drive, it installs without incident.

Working with networks drives are never reliable. Corruption, path problems, networks connections, and privlatges can come in the way of a properly mapped drive. I think your solution is fairly straight forward. You need to install your application from a local filesystem, not a mapped network drive. In the meantime, log a bug report HERE.

AIR application could not be installed...installer is damaged

I am getting the following error on Windows, it is installing fine on MAC:
Sorry, an error occurred:
The application could not be installed because the installer file is damaged
I lost two days of work trying to figure out the issue. Any help is appreciated.
Thnaks

Tzeng, thanks for the reply.
I am installing the AIR app on Windows XP. The AIR app is installing fine on all MAC systems, but not on Windows. The dates in the Windows systems are correct.
Where exactly (what is the "home" directory) on the Windows machine do I need to put the .airappinstall.log file?
Thanks.

The application could not be installed because an application with that name already exists at the s

The application could not be installed because an application with that name already exists at the selected installation location. Try installing to a different location.

1. I am trying to install: Adobe - Download free trial version
AdobeAcrobat
XI Pro <http://www.adobe.com/go/tryacrobatpro/>
Operating system: Windows 7
Current software: see attachment
<Removed by Moderator>

Some PDFs not opened on my iOS devices

some pdf files I received not open on my iOS devic, please advice

AhmedAtif,
Do you see an error message when you try to open some PDF documents?
Adobe Reader mobile products (Adobe Reader for iOS, Android, Windows Phone) do not support DRM (Digital Rights Management) protected eBooks or static/dynamic XFA forms that are authored with Adobe LiveCycle Designer, for example.
Would you attach a screenshot in your next forum reply?
How to add a screenshot to a forum message from iPad/iPhone
Thank you.

Application is not automatically installed on iOS device.

Similar Messages

Maybe you are looking for