Application just shows 1 to 5 dots animation
Hi,
I tried to install my application on another pc. After installing Air, installing my application and run it it showed some strange behavior. It just shows an animation of one to five dots in the middle of the screen and does nothing.
I still use a testversion of flash CS5.
What whould be the reason for this behavior? Is it because the PC is offline or because I use file access?
TIA
is it trying to load something? I also get a message in the error window:
"Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml. The 'secure' attribute is only permitted in HTTPS and socket policy files. See http://www.adobe.com/go/strict_policy_files for details."
Didn't know I was refering by myself somewhere at adobe.
Similar Messages
-
My events just show up as a dot on the calendar - can I get them to show under the calendar?
New to iphone Calendar! After syncing events, they just show up as dots on the calendar - is there a way to have each months events listed under the calendar month they're scheduled for?
Check out some of the calendar apps in the app store. I use "Week Calendar" - even in month mode, it only lists todays events (screen space is pretty limited afterall), but it has a proper week view with events listed in each day's column.
-
Application just showed up, then dissappreared!
Has anyone had a weird app just show up on their phone, when you attempt to open it, the app will not launch? When I attempted to delete the app, that was not possible as there wasn't a "X" displayed in the corner of the application. I shut my phone down, but when I powered it back on, the app dissappeared,
The application had a black backgroud with what appeared to be a fancy letter "D"
Perhaps its a virus?
HelpUnless you have jailbroken your phone, it's not a virus. There's no known malware capable of infecting an iPhone that hasn't been jailbroken.
As to what it might be, it's hard to say. It could be a simple glitch, but it could also mean that someone has hacked your Apple ID and has purchased an app with it. This could, depending on your phone's settings, cause your phone to also download the purchased app, though I don't know why it would have then disappeared again.
I would recommend checking your purchase history. Go to the App Store, click the Updates icon at the bottom, then click the Purchased item above the list of available updates. The most recent purchases should be at the top, so start there and work your way down.
If you find any purchases that you didn't make, you need to change your Apple ID's password immediately, and should also consider enabling two-factor authentication on your Apple ID. You will also need to contact Apple about the fraudulent purchases. -
Because I can't log in I can't do anything on it. When I try to write in my apple I'd username it displays in another language. Please help.
Thank you so much...who knew it was such a simple thing!!!
-
I have an ipad2 and my question is about the calendar. I set up multiple calendars with different colors. Some of the events show up in filled color. Others only show with a colored dot in front of the event. I can't figure out why some show up one way and others show up differently? Any thoughts?
On mine the ones that show on a coloured background are all-day events, the ones with dots and just timed events.
-
Took apart Macbook pro 13 to remove broken headphone tip in the jack. Had to remove battery to get to the headphone jack. Now the laptop won't start. The power button is just not responding. Battery indicator showed charge of 3 dots initially but now only the last dot is blinking. The power cable used to light up green initially but now the green light is gone. I have tried SMC reset, which didn't work. What are my options?
Macbook Pro2067 wrote:
<snip>
What are my options?
Take it to an authorized service center. -
After backing up my iPod my applications will not reload and just shows waiting underneath the application, any help?
http://lifehacker.com/5948155/fix-iphone-apps-stuck-waiting-during-installation
http://alvinalexander.com/apple/iphone-waiting-apps-update-install-reinstall-del ete-ipod -
I have just purchased and installed Lego Harry Potter Years 5-7 app from itunes for my son. It has installed but when we go in to the game, it just shows a black screen with music in the background. Why is this and what do i need to do to be able to play it?
Any help would be appreciated as really dont understand much about the Apple Ipod touch (4th generation).
thanksTry the steps here:
iOS: Troubleshooting applications purchased from the App Store -
Error 3194 still presist while restoring ipod touch 4g, just shows apple logo and wont start
Method 1: i have tried almost everything, 'hosts' file editing (adding and deleting that ip gs.apple.com thing)
Method 2: redsnow, snowbreeze,ireb (custom ispw and fetching thing)...
now my ipod is in dead case, it just gives apple logo and wont start.
Method 3: TS 3.0 and 1.0 checked, certificate xyz... uncheked from intertnet explorer-> internet option -> advanced -> security
Method 4: netsh xyz (comand) in cmd...
Please Help thank you.
"Details:
ipod touch 4g
ios 6.1 installed (lastly)
jail broken but deleted cydia from it
then tried to restore it always gave Error 3194,
then restored it from its backup file after that it didnt opened or just showed apple logo thats it."
my itunes on dignostic gives this report,
Microsoft Windows 7 Business Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP xw4400 Workstation
iTunes 11.1.1.11
QuickTime not available
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 001AB71808E6CBD8
Current user is not an administrator.
The current local date and time is 2013-11-29 04:19:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 8400
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.1.11 is currently running.
iTunesHelper 11.1.1.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {BC8F9388-D244-4F12-92A3-A26318EE6C52}
Description: Broadcom NetXtreme Gigabit Ethernet
IP Address: 192.168.1.102
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Fri Nov 29 04:16:55 2013
Lease Expires: Fri Nov 29 06:16:55 2013
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-11-29 04:18:45.lllaass thank u bro, but none worked for me
i have tried all these methods n above which i mentioned before....
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
in the end i went ot market n paid him 1.94$ and he restored it to 6.1.5... and said apple has closed other ios updation except 6.1.5 ...but still thank u soo much learned some new stuff from u... -
Just show 1 in 2 in at same time. I need help???
foreach (var node in senseblock1_1)
var extraexample = node.Descendants("div").FirstOrDefault(x => x.GetAttributeValue("class", "") == "extraexamps");
if (extraexample != null)
Dictionaries.MoreExample = extraexample.InnerText.Trim();
var phrase_block = node.Descendants("span").Where(x => x.GetAttributeValue("class", "") == "phrase-block");
foreach (var nodephrase in phrase_block)
Dictionaries = new Models.EnglishDictionary();
//phrase head
var phrase_head = nodephrase.Descendants("span").FirstOrDefault(x => x.GetAttributeValue("class", "") == "phrase-head");
Dictionaries.PhraseHead = phrase_head.InnerText.Trim();
//phrase body
var phrase_body = nodephrase.Descendants("span").FirstOrDefault(x => x.GetAttributeValue("class", "") == "phrase-body");
Dictionaries.Phrase = phrase_body.InnerText.Trim();
arrays.Add(Dictionaries);
arrays.Add(Dictionaries);
If there is partner
var phrase_block = node.Descendants("span").Where(x => x.GetAttributeValue("class", "") == "phrase-block");
foreach (var nodephrase in phrase_block)
Dictionaries = new Models.EnglishDictionary();
//phrase head
var phrase_head = nodephrase.Descendants("span").FirstOrDefault(x => x.GetAttributeValue("class", "") == "phrase-head");
Dictionaries.PhraseHead = phrase_head.InnerText.Trim();
//phrase body
var phrase_body = nodephrase.Descendants("span").FirstOrDefault(x => x.GetAttributeValue("class", "") == "phrase-body");
Dictionaries.Phrase = phrase_body.InnerText.Trim();
arrays.Add(Dictionaries);
then it just show this partner(lost dictionary.MoreExample) and thing else if I remove it that showing dictionary.MoreExample, lost this code(did not show)
foreach (var nodephrase in phrase_block)
Dictionaries = new Models.EnglishDictionary();
//phrase head
var phrase_head = nodephrase.Descendants("span").FirstOrDefault(x => x.GetAttributeValue("class", "") == "phrase-head");
Dictionaries.PhraseHead = phrase_head.InnerText.Trim();
//phrase body
var phrase_body = nodephrase.Descendants("span").FirstOrDefault(x => x.GetAttributeValue("class", "") == "phrase-body");
Dictionaries.Phrase = phrase_body.InnerText.Trim();
arrays.Add(Dictionaries);Greg, I have no idea what your question means.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces. -
idk if it is java or what, but every time i go to certain websites, like youtube.com they go blank and just show words, no images or nothing.. however i updated something and youtube works fine.. but now a website called roblox.com every time i hit the play button on a game, (it should load the game into a new window) doesn't do nothing when i click the icon.. to load it... can anyone help me with this problem?
i have a windows 7 quad-core latest version of Firefox, so i have no idea, i think when i updated something it messed up the java source code.. or my Firefox got messed up... plz help?Hello,
To protect against potential Java vulnerabilities, Firefox now asks you to activate Java by default, for each website you visit that uses Java. When you see an "Activate Java" message box, simply click it to load the Java content normally.
[[Image:Fx24-JavaActivate]]
If there is no visible area to activate Java content in the page, click the plugin icon in the address bar. In the message panel that opens, choose "Allow Now" to enable Java content temporarily.
[[Image:Fx24-JavaAllowNow]]
The next time you visit the site or any other that uses Java you will see this message again. If you want to always activate Java for a particular site, you can use the "Allow and Remember" option shown above.
For more information about using Java in Firefox, see the articles [[How to allow Java on trusted sites]] and [[Use the Java plugin to view interactive content on websites]].
'''Important:''' After activating Java, you may see a security prompt, asking you to confirm that you want to run Java, or you may see an "Application Blocked" message, depending on the website and your security settings in the [http://www.java.com/en/download/help/jcp_security.xml#control%20panel Java Control Panel]. These messages come from Java itself, not from Firefox.
For help with Java security prompts and "Application Blocked" messages, see the Java Help pages [http://www.java.com/en/download/help/appsecuritydialogs.xml What should I do when I see a security prompt from Java?] and [http://www.java.com/en/download/help/java_blocked.xml Why are Java applications blocked by your security settings with the latest Java?]
Does this solve your problem? Let us know. -
I downloaded Photoshop CC but I start experiencing trouble, so un-istalled Creative Cloud and Photoshop CC. I then reinstalled Creative Cloud but I am not having trouble reinstalled Photoshop CC. Nothing seems to be working, it just shows me that Photoshop is up to date and ready to use and its not installed on my computer anywhere.
Rattler2015 please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html for information on how to reinstall Photoshop CC.
-
How do I open photoshop? I have it downloaded and only the Adobe Application manager shows with the list of other software. I clicked on photoshop, but not responding.
Nobody can know. Your information is far too vague - no system info, no other details. Just saying that it doesn't work is not conducive to providing assistance...
Mylenium -
In iphoto11when I go to advanced preferences to choose an external editor (PSE11), the drop down menu just shows iPhoto and DSCF0586, which if chosen takes me to the desktop. How do I get rid of DSCF0586 and insert Adobe Elements11?
Click on DSCF0586 and then navigate to the PSE 11 application and select it.
Be sure to select the right PSE 11 file, the one in the Support Files folder:
OT -
Satellite L300-256 - web cam isn't working - Just show Black Colour.
Hello,
i use Toshiba L300-256 model laptop and my web cam was working before some months and today i opened it and it seems to be stopped working.
Its CHICONY USB 2.0 webcam
At first it shows that "some application prevent its working". So i uninstalled all newly installed programs. Then also my webcam didnt work. So i unistalled the driver and installed it again from the driver file downloaded from here. Then also my problem didnt fixed. It just show dark background in the place where image will come while capturing.
Camera blue light is appearing but there isnt any picture coming, eventhough i am in a bright lighted room.
Please help me to fix this issue.
ThanksHi
Do you use face recognition utility?
This software locks and use the webcam too
Maybe there is something wrong between these both tools
In your case I recommend uninstalling the face recognition and webcam software.
Clean the registry using CCLeaner (freeware).
Then reboot twice and start with webcam installation then check if the webcam would works
Maybe you are looking for
-
I'd like to buy a G3 Mac Desktop! "Need help Choosing which one!"
Hey Apple community its me again with a new problem. after fixing a ibook G3 Clamshell, i've been longing for the simpler days when OS 9 was the best you could own. so i'm posting this same question in all discussion that apply. i'm currently using a
-
Thread death and xml files when analyzing large datasets
i analyze large data sets. for example: 4000 persons that each have a time series with 8,000 data points. i do this linearly, so (i think) i am only running the *public static void main(String[] args) { .... }* for(Person person : PersonSet) { // th
-
Working with clobs or extremelly large strings - please urgent
Hi, i have a VARCHAR2 variable that is VARCHAR2(32767), is this possible? and i receive to the procedure a VARCHAR2 with almost 28000 character, then i have to insert that value as a CLOB in a xmltype table. This would look like a question to XML DB
-
Screen icon flashes not getting recorded
Hi folks- I'm documenting how to use an ESRI ArcMap "computerized map" application. I'm making a Captivate demo of a few screen actions. When I go into record mode I do get the pull-downs and data entry actions in my demo, but one of the things I do
-
Why does it keep on going to start point?
I've fallen in love with FCPX... it's an awesome program. Now i'm trying to edit a video. I have to zoom in and out of the timeline to chop clips and reposition them. Every once in a while, the playhead/scrub (red line) always goes back to the start