Application keeps trying to install and can't
After creating a backup of all my data and updating my N95 8GB to the latest firmware I now have a problem of some application trying to install itself after I use Mass Memory mode or turn my phone off and then back on again.
It tries to install for about 2 minutes (phone just says "Installing Application") and then says that it can't and I should try installing it from wherever it's stored in mass memory.
Does anyone know how to fix this?
Hi Jericho,
Thanks for your reply.
At the moment I only have the standard themes installed that came with the phone, and these are all on the phones memory, not the "external" 8gb. Also I can't seem to delete any of the preinstalled themes anyway.
The same with my messages, I checked and they are all saved to the phone's memory, not the 8gb memory.
Interestingly I just tried the phone again to see if it would go into mass storage mode and it worked. After unplugging it from the pc though it still tried to install something and I again received the message "Untrusted Software is trying to be installed on your phone, please install it from the applications folder".
I plugged it back in and the mass memory was still able to be read by my computer, so I'm at a loss as to what changed, or stopped running to allow this.
Similar Messages
-
I keep trying to install and reinstall itunes but keep getting apple application support not found...how do i fix this?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Application Support won't install normally.
tt2 -
OS X has failed to install on my macbook pro and now it keeps trying to install when the computer restarts and I cannot get back to how it was and ditch the upgrade! Can you tell me how to do this please?
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault boot volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later. -
every time i start my computer says update 3.6.12 ready to install. no matter how many time i have clicked install i get a message -- partail update not be applied. i all ready have 3.6.12 and cant get the thing to stop
It shouldn't be necessary to reboot the computer to complete an update.<br />
If a reboot is needed then that usually means that some (security) software is blocking files or you need elevated Administrator permissions.<br />
Run the Firefox program once as Administrator (right-click: Run as ... : Administrator).
If that still causes the same problem then remove the Firefox program folder to do a clean install. You need to download a fresh copy of the full version from http://www.mozilla.com/firefox/all.html -
Hi all. Sorry if the answer to this one is obvious but...
I was given a copy of 10.5 which I think was bundled with an iMac or a laptop. When I try to install it on my old G5 tower I just get a message which says "Mac OS 10.5 cannot be installed on this computer.). I'm guessing this is because I'm a different type of Mac and it's decided I've not paid for it.
never mind I thought a free copy was probably to good to be true.....
Cheers. Derek.I'm guessing this is because I'm a different type of Mac
It is. You need a retail package to install Mac OS X 10.5 onto the G5.
(46343) -
I previously had itunes on my computer uninstalled and now I want to reinstall it on my computer now and it keeps trying to install to a J drive instead of the C drive I have plenty of room on my computer but not on this "J" drive how can I change where it installs I tried to click change before it installed and it would not let me.
See the further information area of Troubleshooting issues with iTunes for Windows updates.
tt2 -
I keep trying to install the latest version of firefox and it's not working
I'm running firefox 3.something, I think, and I keep trying to install the latest version on my mac. I go through saving it, opening it, dragging the icon to my apps file...and when I drag it to my apps file it takes a few seconds to do *something*, pings at me and then...nothing after that. I try to open it and it tells me I have to close firefox first, so I do (restart even) and when it opens again it still opens the old version.
If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox -
My IPAD software update is avail for the iOS 7.0.3 I keep trying to install it. I have my IPAD hooked up to my MAC and the Wi FI, I have internet open It keeps telling me not connected to internet. What am I doing wrong.
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists. -
Bing Bar 7.0 (KB2626804) Keeps trying to install itself on my HP and Fails.
Hello, I have upgraded my system to Windows 10 Pro, and ever since it has been trying to install the Bing Bar 7.0 and failing. I dont need it. Dont have it. Didnt have it on my Windows 7 Pro. So I have no idea why it is trying to install it on my system. I have looked everywhere on my computer, and it is not in the programs to be installed. I have even looked in all of my browsers, to make sure that it wasn't hidden in any of those. It isnt. So I did a DxDiag on my system to see what it had to say, and when it uploads and fails, the Diagnosis says: +++ WER2 +++:
Fault bucket , type 0Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0 Problem signature:P1: 10.0.10240.16397P2: 80246013P3: F7C086A0-F7E8-486A-9167-9A09707BF1ECP4: InstallP5: 101P6: 0P7: 80246013P8: UpdateOrchestratorP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0 So I have no idea what to do. This Bing Bar will keep trying to install itself over and over and over, and fail; and I wont be able to stop it. Does anyone have any idea what I can do? TimHello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how a recent Windows update keeps trying to install itself on your desktop computer and fails, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on How to block automatic reinstall of a driver or update from Windows Update. This should help prevent the updating of KB2626804 on your system. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards -
windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?
Hi Tamekia,
I am sorry to hear nothing has worked yet. I have looked up some additional information and possible solutions. Follow the steps in this document to perform a level-three uninstall, register the Windows Installer Service, and then reinstall the HP software. An uninstall and reinstall of the software deletes and overwrites any of the files that might cause the error and resets the Windows Installer. HP recommends that you download the latest software from the HP Web site to remove any files that might be causing this error.
Level-three uninstall, and register the Windows Installer Service
Note: The title of this document is not specific to the issue you are experiencing or the operating system you have, but the 3 steps and instructions are what I suggest we do to resolve the issue you are experiencing.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
I have an iMac that I am running OSX 10.8.3 on. I keep trying to install 10.8.4 but it will not install. I tried updating and installing several times and it restarts the computer but it will not install the software. My machine is about 8 months old so, it's in the newish range. HELP!
Sometimes the App Store version doesn't work correctly. In this case, install 10.8.4 with the Combo version > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US
The Combo installer is the safest way to update OS X, and it allows you to update more than one computer with a single download -
I'm having problems installing OS X update 10.9.2. Twice I have tried to install, and both times I get the message - Update could not be verified. Can anyone advise ?
Are you updating from the App Store when you get that error message?
If so, thry using the 10.9.2 Combo update -> http://support.apple.com/kb/DL1726.
Good luck,
Clinton -
Keep trying to install update for itunes and keep getting 'invalid signature'
keep trying to install the new updates for itunes and keep getting 'invalid signature' and it won't download
That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
I updated to iOS5 weeks ago; but suddenly I can't open the mail, contacts, calendar settings and I am not getting any email to my iPad2 AND it keeps trying to connect and it is runnijng the battery down...any help?
I already tried rebooting, and I tried hooking it up to itunes as well, no luck there either.Try to reset all settings.
Settings > General > Reset > Reset all Settings. It won't delete your data.
When you say reboot, do you mean you pressed the home and sleep button at the same time until it restarted? -
I am trying to pair my phone to my 2011 Toyota kluger KX-R. I have turned bluetooth on my phone but it keeps searching for devices and can not find any, including my computer.
No worries. Often after iTunes updates you have to reconnect your device in order for iTunes to see it. Happens to me all the time!
Maybe you are looking for
-
Email signature links not linking
Hello. After unsuccessfuly trying to import my signatures from my MBP running Mountain Lion to my new iMac running Mavericks, I tried to create new signatures from scratch. I followed the basic guidelines: created a dummy signature, edited it (using
-
New Nano and iPod Camera Connector?
I just bought the new iPod Nano (3rd generation) and the iPod Camera Connector. The iPod is not recognizing the camera connector. When I connect the camera connector to the iPod, I get this message: "Unsupported accessory is not supported". The geniu
-
IPod 5g showing as iPod 3G in iTunes 7
At first I couldn't get iTunes to recognize my iPod so I could restore it. I plugged it in to a iBook and was finally able to restore it. But now when I plug it in, it shows up as a 5G iPod on my desktop (with the nice 5G icon, but as a 3G iPod on my
-
Table name in APO for demand planning
Hi gurus, I want to upload Excel data (forecast demand) into APO SNP for the following fields APO product APO product Name Demand Qty Demand Date Can you please tell me the suitable table name in APO for those fields? Regards Rajib Pathak
-
Hi, Currently, volume of line item in sales order VBAP-VOLUM is calculated based on order quantity. However, I need the calculation based on confirmed quantity. Any user exits or possible solutions. Thanks in advance.