Application launch failed. Ensure that the device screen is unlocked - after the phone update

I have the following error "
Error 1 Application launch failed. Ensure that the device screen is unlocked and device is developer unlocked. For details on developer unlock, visit http://go.microsoft.com/fwlink/?LinkId=195284. 0 0
I'm pretty sure it happened after the last update. I was able to use my phone as a dev one before
and my account shows it as a registered device.
The OS version is 7.10.8107.79.
The steps that I tired
-Registered again my phone with the registration tool
-Check the issue with Zune auto-launcher (zune isn't syncing and the phone is connected)
-Close and start everything again
Other possible issues
- Do I have to have sdk 7.1 to deploy?
- Do I have to wait 24h for registration?

You should be using SDK 7.1 anyway, so install that.
After the update, the phone may have locked itself. This may not be reflected in your AppHub account though. Using the Developer Registration Tool, register the device, unregister it, then register it again.

Similar Messages

That application could not be lanched for debugging. ensure that the target device screen is unblock and that the application in installed

what is the problems?

Hi windows phone app can not debugging,
>>that application could not be lanched for debugging. ensure that the target device screen is unblock and that the application in installed.
Based on the error information, it seems that you are trying to deploy the application on the Windows Phone Device. Then what Windows Phone OS are you using? Can you run
the application by using the Windows Phone Emulator?
For deploying the application on the Windows Phone Device, first please try to make sure you have registered your phone for Windows Phone development. For more information, please refer to:
https://msdn.microsoft.com/en-us/library/windows/apps/ff769508(v=vs.105).aspx .
After that please try to make sure that phone screen is unlocked and the project you want to run is set as the default Startup project.
Besides, please try to refer to the following article about how to deploy and run apps on a Windows Phone device:
https://msdn.microsoft.com/library/windows/apps/ff402565(v=vs.105).aspx#BKMK_device .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Errors when creating a PDF: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running

When a PDF is created through the web portal BW gives the following error:
Log ID: 00505688424200660000001000001D940005122BD8D83308
Initial cause
Message: Processing exception during a "Render" operation.
Request start time: Thu Mar 26 08:20:15 CET 2015
com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
#1.5 #00505688424200690000001200001D940005122BD8D7D9B9#1427354415038#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#com.adobe/AdobeDocumentServices#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#ADSUSER#101#SAP J2EE Engine JTA Transaction : [03bffffffb7ffffffb2008ffffffe9]#P0VAPPSAPB1_BWP_3913650##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_35##0#0#Fatal##Plain###Failed to allocate a connection due to an exception (the full stack trace is logged below): org.omg.CORBA.COMM_FAILURE: Could not connect to host and port localhost:3333, useSSL=false. There are not working dispatcher nodes. vmcid: SUN minor code: 2 completed: No#
#1.5 #00505688424200690000001300001D940005122BD8D7DC9A#1427354415039#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#com.adobe/AdobeDocumentServices#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#ADSUSER#101#SAP J2EE Engine JTA Transaction : [03bffffffb7ffffffb2008ffffffe9]#P0VAPPSAPB1_BWP_3913650##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_35##0#0#Fatal##Plain###org.omg.CORBA.COMM_FAILURE: Could not connect to host and port localhost:3333, useSSL=false. There are not working dispatcher nodes. vmcid: SUN minor code: 2 completed: No
org.omg.CORBA.COMM_FAILURE: Could not connect to host and port localhost:3333, useSSL=false. There are not working dispatcher nodes. vmcid: SUN minor code: 2 completed: No
at com.sap.engine.services.iiop.server.CommunicationLayerImpl.retrieveDispAndConnID(CommunicationLayerImpl.java:544)
at com.sap.engine.services.iiop.server.CommunicationLayerImpl.getDelegate(CommunicationLayerImpl.java:608)
at com.sap.engine.services.iiop.internal.ClientORB.getDelegate(ClientORB.java:579)
at com.sap.engine.services.iiop.CORBA.CORBAObject.<init>(CORBAObject.java:49)
at com.sap.engine.services.iiop.CORBA.IOR.read_object(IOR.java:111)
at com.sap.engine.services.iiop.internal.ClientORB.string_to_object(ClientORB.java:536)
at com.sap.engine.system.ORBProxy.string_to_object(ORBProxy.java:290)
at com.adobe.service.J2EEConnectionFactoryManagerPeerImpl.getConnection(J2EEConnectionFactoryManagerPeerImpl.java:140)
at com.adobe.ads.remote.ServiceLocator.lookupDataManager(Unknown Source)
at com.adobe.ads.remote.ServiceLocator.getDataManager(Unknown Source)
at com.adobe.ads.remote.EJB_DataManager.getDataManager(Unknown Source)
at com.adobe.ads.remote.EJB_DataManager.<init>(Unknown Source)
at com.adobe.ads.request.Request.getDataManager(Unknown Source)
at com.adobe.ads.operation.Render.execute(Unknown Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
at com.adobe.ads.request.Request.processOperations(Unknown Source)
at com.adobe.ads.request.Request.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
#1.5 #00505688424200690000001500001D940005122BD8D7DDF5#1427354415039#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#101#SAP J2EE Engine JTA Transaction : [03bffffffb7ffffffb2008ffffffe9]#P0VAPPSAPB1_BWP_3913650##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_35##0#0#Error#1#/System/Server#Plain###Exception getting DataManager reference, trying again...#
#1.5 #00505688424200690000001700001D940005122BD8D7EF1B#1427354415044#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#com.adobe/AdobeDocumentServices#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#ADSUSER#101#SAP J2EE Engine JTA Transaction : [03bffffffb7ffffffb2008ffffffe9]#P0VAPPSAPB1_BWP_3913650##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_35##0#0#Fatal##Plain###Failed to allocate a connection due to an exception (the full stack trace is logged below): org.omg.CORBA.COMM_FAILURE: Could not connect to host and port localhost:3333, useSSL=false. There are not working dispatcher nodes. vmcid: SUN minor code: 2 completed: No#
#1.5 #00505688424200690000001800001D940005122BD8D7F204#1427354415045#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#com.adobe/AdobeDocumentServices#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#ADSUSER#101#SAP J2EE Engine JTA Transaction : [03bffffffb7ffffffb2008ffffffe9]#P0VAPPSAPB1_BWP_3913650##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_35##0#0#Fatal##Plain###org.omg.CORBA.COMM_FAILURE: Could not connect to host and port localhost:3333, useSSL=false. There are not working dispatcher nodes. vmcid: SUN minor code: 2 completed: No
org.omg.CORBA.COMM_FAILURE: Could not connect to host and port localhost:3333, useSSL=false. There are not working dispatcher nodes. vmcid: SUN minor code: 2 completed: No
at com.sap.engine.services.iiop.server.CommunicationLayerImpl.retrieveDispAndConnID(CommunicationLayerImpl.java:544)
at com.sap.engine.services.iiop.server.CommunicationLayerImpl.getDelegate(CommunicationLayerImpl.java:608)
at com.sap.engine.services.iiop.internal.ClientORB.getDelegate(ClientORB.java:579)
at com.sap.engine.services.iiop.CORBA.CORBAObject.<init>(CORBAObject.java:49)
at com.sap.engine.services.iiop.CORBA.IOR.read_object(IOR.java:111)
at com.sap.engine.services.iiop.internal.ClientORB.string_to_object(ClientORB.java:536)
at com.sap.engine.system.ORBProxy.string_to_object(ORBProxy.java:290)
at com.adobe.service.J2EEConnectionFactoryManagerPeerImpl.getConnection(J2EEConnectionFactoryManagerPeerImpl.java:140)
at com.adobe.ads.remote.ServiceLocator.lookupDataManager(Unknown Source)
at com.adobe.ads.remote.ServiceLocator.getDataManager(Unknown Source)
at com.adobe.ads.remote.EJB_DataManager.getDataManager(Unknown Source)
at com.adobe.ads.remote.EJB_DataManager.<init>(Unknown Source)
at com.adobe.ads.request.Request.getDataManager(Unknown Source)
at com.adobe.ads.operation.Render.execute(Unknown Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
at com.adobe.ads.request.Request.processOperations(Unknown Source)
at com.adobe.ads.request.Request.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
#1.5 #00505688424200690000001900001D940005122BD8D7F530#1427354415045#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#101#SAP J2EE Engine JTA Transaction : [03bffffffb7ffffffb2008ffffffe9]#P0VAPPSAPB1_BWP_3913650##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_35##0#0#Fatal##Plain###Fatal exception on second attempt at getting DataManager reference
com.adobe.ProcessingException: CORBA system exception instantiating a DataManager from the ConnectionFactory
at com.adobe.ads.remote.ServiceLocator.lookupDataManager(Unknown Source)
at com.adobe.ads.remote.ServiceLocator.getDataManager(Unknown Source)
at com.adobe.ads.remote.EJB_DataManager.getDataManager(Unknown Source)
at com.adobe.ads.remote.EJB_DataManager.<init>(Unknown Source)
at com.adobe.ads.request.Request.getDataManager(Unknown Source)
at com.adobe.ads.operation.Render.execute(Unknown Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
at com.adobe.ads.request.Request.processOperations(Unknown Source)
at com.adobe.ads.request.Request.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: org.omg.CORBA.COMM_FAILURE: Could not connect to host and port localhost:3333, useSSL=false. There are not working dispatcher nodes. vmcid: SUN minor code: 2 completed: No
at com.sap.engine.services.iiop.server.CommunicationLayerImpl.retrieveDispAndConnID(CommunicationLayerImpl.java:544)
at com.sap.engine.services.iiop.server.CommunicationLayerImpl.getDelegate(CommunicationLayerImpl.java:608)
at com.sap.engine.services.iiop.internal.ClientORB.getDelegate(ClientORB.java:579)
at com.sap.engine.services.iiop.CORBA.CORBAObject.<init>(CORBAObject.java:49)
at com.sap.engine.services.iiop.CORBA.IOR.read_object(IOR.java:111)
at com.sap.engine.services.iiop.internal.ClientORB.string_to_object(ClientORB.java:536)
at com.sap.engine.system.ORBProxy.string_to_object(ORBProxy.java:290)
at com.adobe.service.J2EEConnectionFactoryManagerPeerImpl.getConnection(J2EEConnectionFactoryManagerPeerImpl.java:140)
... 37 more
#1.5 #00505688424200690000001B00001D940005122BD8D7F9BB#1427354415047#com.adobe.ads.request.Request#com.adobe/AdobeDocumentServices#com.adobe.ads.request.Request#ADSUSER#101#SAP J2EE Engine JTA Transaction : [03bffffffb7ffffffb2008ffffffe9]#P0VAPPSAPB1_BWP_3913650##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_35##0#0#Error#1#/System/Server#Plain###Processing exception during a "Render" operation.
Request start time: Thu Mar 26 08:20:15 CET 2015
com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
Exception Stack Trace:
com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
at com.adobe.ads.operation.Render.execute(Unknown Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
at com.adobe.ads.request.Request.processOperations(Unknown Source)
at com.adobe.ads.request.Request.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
#1.5 #00505688424200660000000700001D940005122BD8D80DDF#1427354415052#com.sap.tc.webdynpro.pdfobject.core.PDFObject#sap.com/irj#com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall#NGS_MM77#100##n/a##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/UserInterface#Plain###Result(0): Error_Level is: 2#
#1.5 #00505688424200660000000900001D940005122BD8D80EA3#1427354415052#com.sap.tc.webdynpro.pdfobject.core.PDFObject#sap.com/irj#com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall#NGS_MM77#100##n/a##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/UserInterface#Plain###Result(1): Results is: Processing exception during a "Render" operation.
Request start time: Thu Mar 26 08:20:15 CET 2015
com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
Exception Stack Trace:
com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
at com.adobe.ads.operation.Render.execute(Unknown Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
at com.adobe.ads.request.Request.processOperations(Unknown Source)
at com.adobe.ads.request.Request.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
#1.5 #00505688424200660000000B00001D940005122BD8D80FBD#1427354415052#com.sap.tc.webdynpro.pdfobject.core.PDFObject#sap.com/irj#com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall#NGS_MM77#100##n/a##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/UserInterface#Plain###Result(2): VersionInfo is: 800.20120718063822.876753#
#1.5 #00505688424200660000000D00001D940005122BD8D81033#1427354415052#com.sap.tc.webdynpro.pdfobject.core.PDFObject#sap.com/irj#com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall#NGS_MM77#100##n/a##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/UserInterface#Plain###Result(3): TraceString is:    Begin operation: Render, elapsed time = 7488 ms.
         com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
   End operation: Render, elapsed time = 7501 ms.
#1.5 #00505688424200660000000E00001D940005122BD8D81FB2#1427354415056#com.sap.ip.bi.export.xfa.impl.PDFConverter#sap.com/irj#com.sap.ip.bi.export.xfa.impl.PDFConverter#NGS_MM77#100##n/a##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_2##0#0#Error##Plain###EXPORT XFA calcTemplate=Processing exception during a "Render" operation.
Request start time: Thu Mar 26 08:20:15 CET 2015
com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
Exception Stack Trace:
com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
at com.adobe.ads.operation.Render.execute(Unknown Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
at com.adobe.ads.request.Request.processOperations(Unknown Source)
at com.adobe.ads.request.Request.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Thanks Sandy,
I have already solved the problem , I have done the following actions:
1. Stop J2EE engine
2. rename folder
     /usr/sap/<SID>/<Instance>/j2ee/os_libs/adssap
     Please rename this adssap folder to adssap.old
3. Start J2EE engine
   During starting J2EE engine, folder adssap will be re-generated.
4. Also make sure XMLform.exe is extracted under
    /usr/sap/<SID>/<Instance>/j2ee/os_libs/adssap/XMLFormService/bin
I restarted the entire instance (ABAP and JAVA) and now all is running fine.

Please ensure that the applicationhost.config file is correct and recommit the last configuration changes made

I am receiving event ID 5189 on Server 2008 R2, IIS 7.5. I experience this error across a number of servers, each of which is running only the default web site, but have 600+ applications running on the default web site. Each application
has its own application pool. My point is, the applicationhost.config is rather large.
I have seen a number of posts on this error message, but my issue itself seems to differ somewhat. I am aware of a similar post: http://social.technet.microsoft.com/Forums/en-US/3128ee93-1319-4cc2-9257-003512caf476/event-id-5189-microsoftwindowswas?forum=exchangesvrgeneral
which points to KB http://technet.microsoft.com/en-us/library/cc734988%28v=ws.10%29.aspx
However, in my case, it doesn't seem that the extreme measures for this resolution are required. The error usually indicates a corrupted applicationhost.config that must be manually fixed, or otherwise the WAS service needs to be restarted, or the
server itself, etc.
In my case, the issue can usually be fixed by an application pool recycle, or at worst a stop/start. I have an application which is sensitive to recycles, and so we do not have periodic recycle events configured for this application, which is the bulk
of the applications on the servers. It seems to me that this issue is usually caused by the application being in use when there is an applicationhost.config change.
For instance, we have one application that we deploy using msdeploy. We found that when we ran an installation for this application via msdeploy, we were receiving this event, and we would subsequently get 500 errors in the application (sometimes the
application pool corresponds to that which is identified in the event log, sometimes it doesn't).    It seems like applications that were being hit at the time the applicationhost.config was modified by msdeploy were affected. In an attempt
to correct this, we moved from msdeploy to a batch file containing appcmd commands. This also did not resolve the issue.
I have another application which is installed using PowerShell commandlets. We started to notice that this script also caused the issue to occur on occasion. As I continued to identify different processes that resulted in the same issue, I came
to the conclusion that this is likely due to any change in the applicationhost.config. I assume the issue is that the applicationhost.config is modified during a read operation to the file by the application pool, or WAS service, and that the recycle
event, which corrects the issue, forces a re-read of the applicationhost.config, resolving the bad-read issue.
Has anyone else experienced this, or do you have any recommendations? My current work-around is to not install any applications during peak hours, and performing an IISRESET after installs are completed, to ensure application stability.
Message              : The Windows Process Activation Service failed to generate an application pool config file for application pool 'myAppPool'. The error type is '7'. To resolve this issue,
please ensure that the applicationhost.config file is correct and recommit the last configuration changes made. The data field contains the error number.
Id                   : 5189
Version              : 0
Qualifiers           : 49152
Level                : 2
Task                 : 0
Opcode               : 0
Keywords             : 36028797018963968
RecordId             : 324108
ProviderName         : Microsoft-Windows-WAS
ProviderId           : 524b5d04-133c-4a62-8362-64e8edb9ce40
LogName              : System
ProcessId            : 0
ThreadId             : 0
MachineName          : MyComputer
TimeCreated          : 3/3/2014 9:03:24 PM
ContainerLog         : system
MatchedQueryIds      : {}
Bookmark             : System.Diagnostics.Eventing.Reader.EventBookmark
LevelDisplayName     : Error
KeywordsDisplayNames : {Classic}
Properties           : {System.Diagnostics.Eventing.Reader.EventProperty, System.Diagnostics.Eventing.Reader.EventProperty, System.Diagnostics.Eventing.Reader.EventProperty}

As an update to this issue, after doing some research, it appears the behavior is related to a new feature in IIS7 called Application Pool Isolation (http://technet.microsoft.com/en-us/library/dd163536.aspx).
This new feature prevents cross-application spillage by isolating the configuration for each application pool in IIS. So in reality, an application pool never actually reads the applicationhost.config - that is just a master file, and each time it
is update, it triggers a change to the individual application pool configuration files, located in C:\inetpub\temp\apppools.
We did try setting Advanced Settings > Disable Recycling for Configuration Change to true, but after an IIS reset we were still able to reproduce the issue - worse actually, because in our test program, which continually hits the web
service, and also continually makes apphost.config changes, when the two events collide, the 500.19 issue precipitates; but after an additional change to the apphost.config, it seems that the additional changes will actually correct the issue (seemingly forcing
another recycle, which is also how we resolve the issue manually); after making this setting adjustment, once the 500.19 issue precipitates, additional changes to the apphost.config does not correct the problem, only a manual recycle corrects it. This
is the recycling.disallowRotationOnConfigChange property of the app pool. We also set the setting for recycling.disallowOverlappingRotation to True as well, with the same result.
We ARE able to prevent this issue by setting the C:\inetpub\temp\apppools\myapppool\myapppool.config to read-only, but for obvious reasons, this is not a desired work-around.
It seems like what is happening is that any change to the ApplicationHost.config is resulting in each of the C:\inetpub\temp\apppools temp application pool config files being updated as well, in addition to triggering an application pool recycle. It
seems to me the desired behavior would be that these files are only updated if the applicationhost.config changes are specific to that application pool - but that doesn't seem to be the behavior.
After turning on failed request tracing, I was able to narrow the error down more:
ModuleName
AnonymousAuthenticationModule
Notification
2
HttpStatus
500
HttpReason
Internal Server Error
HttpSubStatus
19
ErrorCode
2147942413
ConfigExceptionInfo
\\?\C:\inetpub\application\application\web.config ( 9) :Failed to decrypt attribute 'password'
Notification
AUTHENTICATE_REQUEST
ErrorCode
The data is invalid. (0x8007000d)
This seems to be pretty static. Trying to look into possible causes of this issue.

Service cannot be started. Microsoft.VirtualManager.DB.CarmineSqlException: Unable to connect to the VMM database. Ensure that the SQL Server is running and configured correctly

Hi All,
I am setting up SCVMM 2012 R2 in a production environment. Whenever I restart the SCVMM virtual machine the VMM service doesn't start automatically, I have to manually start it. I checked the VMM logs and in the event viewer i find the below error,
Service cannot be started. Microsoft.VirtualManager.DB.CarmineSqlException: Unable to connect to the VMM database. Ensure that the SQL Server is running and configured correctly. ---> System.Data.SqlClient.SqlException: Cannot open database "VirtualManagerDB"
requested by the login. The login failed. Login failed for user 'NXTRA\VMMSVC'. at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean&
dataReady) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.Sq...
I added the 'VMMSVC' account as db_owner and sysadmin and also NT_Authority\System with same permissions still the service doesn't start on the start up.
I googled a lot and I find the threads with the error containing "General failure" but not with the above. Can someone please help me to find out why this error is occuring.
Thanks,
Ravi

It's often only a problem of the service dependencies. SCVMM starts to fast, SQL server on the same machine in not initialized yet. Here are working service dependencies to ensure SQL server is initializes before SCVMM starts.
You can set the service dependencies directly in regedit (as always: be careful modifying the registry ...)
Here is the content of a reg file setting the dependency.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SCVMMService]
"DependOnService"=hex(7):53,00,51,00,4c,00,53,00,45,00,52,00,56,00,45,00,52,00,\
41,00,47,00,45,00,4e,00,54,00,00,00,53,00,51,00,4c,00,42,00,72,00,6f,00,77,\
00,73,00,65,00,72,00,00,00,53,00,51,00,4c,00,57,00,72,00,69,00,74,00,65,00,\
72,00,00,00,4d,00,53,00,53,00,51,00,4c,00,46,00,44,00,4c,00,61,00,75,00,6e,\
00,63,00,68,00,65,00,72,00,00,00,00,00

[svn:osmf:] 10248: Fix a few bugs related to the interaction between IPlayable, IPausable, and ITemporal within a SerialElement, specifically around ensuring that the transition from child to child happens in the various permutations of these traits .

Revision: 10248
Author:   [email protected]
Date:     2009-09-14 16:45:00 -0700 (Mon, 14 Sep 2009)
Log Message:
Fix a few bugs related to the interaction between IPlayable, IPausable, and ITemporal within a SerialElement, specifically around ensuring that the transition from child to child happens in the various permutations of these traits. Introduce a helper class for managing this logic, as it can happen in both CompositePlayableTrait and CompositeTemporalTrait. This lays the groundwork for a MediaElement which only implements IPlayable (e.g. to ping a tracking server) working within a serial composition. Beef up unit tests so that these cases don't get broken in the future.
Modified Paths:
    osmf/trunk/framework/MediaFramework/.flexLibProperties
    osmf/trunk/framework/MediaFramework/org/openvideoplayer/composition/CompositePlayableTrai t.as
    osmf/trunk/framework/MediaFramework/org/openvideoplayer/composition/CompositeTemporalTrai t.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/openvideoplayer/composition/TestSerialEle ment.as
Added Paths:
    osmf/trunk/framework/MediaFramework/org/openvideoplayer/composition/SerialElementTransiti onManager.as

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

After i restoring the vault and finish the restore the aperture pop up icon said : a problem was encountered when attempting to restore from this vault. Please ensure that the has the appropriate permissions and try again.

after i restoring the vault and finish the restore the aperture pop up icon said : a problem was encountered when attempting to restore from this vault. Please ensure that the has the appropriate permissions and try again.

Try this:
#Go to '''Tools '''| '''Options '''| '''Advanced '''and click the '''Network '''tab.
#In the Offline Storage menu, click the '''Clear Now''' button.
#In the location bar, type '''about:config '''and hit Enter.
#In the filter at the top, type: '''keyword.URL'''
#Double click it and remove whatever's in there. You'll see it revert to "Default" and "String".
#Go to File | Exit
#Restart Firefox and go to the page you want to set as your homepage
#Go to '''Tools '''| '''Options '''| '''General'''.
#Make sure it says "''Show My Homepage''" in the first dropdown menu.
#Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.

I need to ensure that the data environment is restored when user is returned to the main form

Greetings...
VFP 9.0 SP2, Win7 workstations, Server 2008
I have a form that contains many grids, the various tables have a relationship and everything works as it should.
The main form gives users the ability to run other forms and programs. When a user is returned to the main form, is there a way to ensure that the data environment is back to the way it was prior to call to
the other form/program? I have tried create view/set view and I believe that would do what I want but when the set view command is issued, the grids are empty.
As always, any advice/suggestions are greatly appreciated.
Thank you.

Bob has it in very short.
If you want something to stay as it is, you don't do anything to it.
That sounds easy, but it means all your other forms have to use private data sessions to not disturb any state in the main form.
A forms dataenvironment is its definition of data to be opened. CREATE VIEW / SET VIEW is really just very basic and won't reconstruct everything, eg no record positions. While it reestablishes relations, this won't give you the situation you left, simply
because record positions are not saved, cursors are not saved, so all data queried while working is lost.
You may save more info, if you really want to reconstruct a situation after restarting the application. Then you have to save IDs (better than saving recnos) and reconstruct everything.
What is more workable is saving query parameters to find and navigate to the the same data again.
Bye, Olaf.
Edit: Don't take "query parameters" too literal. This might be view parameters, but can be anything you use as search criteria to let users get to their current display of data.
Olaf Doschke - TMN Systemberatung GmbH
http://www.tmn-systemberatung.de

My reader will not open a PDF file that I have downloaded from a government web site (an application form) - it states that the file is not good. I can open on the web site but not from my mac computer

My reader will not open a PDF file that I have downloaded from a government web site (an application form) - it states that the file is not good. I can open on the web site but not from my mac computer.

Maybe this: http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html ?
Do you have a link to that document?

HT201210 While downloading iOs7 my iPhone 4 is stuck asking to be connected to iTunes. When I connect to my computer, the error message on my computer says that the phone is in recovery mode. I can turn it off and on, but the screen on the phone stays t

While downloading iOs7 on my iPhone 4 stopped with a screen indicating it needed to connect with iTunes. I can turn the phone off and on, but the screen with the iTunes and plug does not change. I tried connecting to my computer with iTunes open and the computer message indicated that the phone was in recovery mode. Any suggestions?

Yes. Plug it into your computer and restore it. Once it's in recovery mode, that's your only option.

I am selling my Mac Mini. I recently purchased OS X Lion. When I restore to factory settings, how can I ensure that the operating system will still be Lion, and not the original operating system, which I believe was Snow Leopard?

I am selling my Mac Mini. I recently purchased OS X Lion. When I restore to factory settings, how can I ensure that the operating system will still be Lion, and not the original operating system, which I believe was Snow Leopard?

If you bought Lion from the App Store, you can't legally or practically transfer it, because it's tied to your Apple ID. Reinstall the original software from the discs that came with the machine.

Receiving Error : Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables. while trying to create a new Customer.

Hi All,
We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
Your help is appreciated!
Thanks in advance,
SKA

You can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks

22591 The specified computer name (%ComputerName;) is already in use by another virtual machine or by a virtual machine configuration object. Ensure that the computer name is unique in the VMM environment, and then try again.

Hello everyone,
I recently bummed into an error message when I want to deploy a service template.
Setup:
1 HyperV server on win2k12 r2
1 SCCM VMM 2k12r2 on the hyperv server
1 template with all the objects in the library
Error:
When I deploy the the service template I get the below error message.
22591
The specified computer name (%ComputerName;) is already in use by another virtual machine or by a virtual machine configuration object.
Ensure that the computer name is unique in the VMM environment, and then try again.
The issue is that I can't find it anywhere, not on my domain controller not on my dns server as a record and also not as a vm in sccm or in powershell when doing get-vm. So where do I need to remove it ( no it is not an option to create a new Hostname for
this service template ).
Andre

There could be a couple things happening.
One - you have a Service Template, it defines %Computername% as a variable. And you have deployed this Template once using 'foo' and you are deploying it again as 'foo' without deleting the previous instance.
Two - you hardcoded the computer name into the template.
Three - you are scaling out and you have hit the bug that the wizard does not increment the machinename if you have something like computername## where SCVMM should be incrementing the machine name.
Windows does not support identically named machines (you can't have two machines on the same network with the same computer name - they broadcast their name and the 'second' one shuts down its network stack). In support of this SCVMM also enforces
this rule.
And with any templates SCVMM is in charge of machine names at deployment.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

[svn:fx-trunk] 11992: Ensure that the textFlow of a RichText always has a " damage" handler when you get it, so that when you mutate the textFlow the RichText updates.

Revision: 11992
Revision: 11992
Author:   [email protected]
Date:     2009-11-19 10:29:17 -0800 (Thu, 19 Nov 2009)
Log Message:
Ensure that the textFlow of a RichText always has a "damage" handler when you get it, so that when you mutate the textFlow the RichText updates.
QE notes: None
Doc notes: None
Bugs: SDK-23869
Reviewer: Carol
Tests run: ant checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-23869
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichText.as

Hey jerzeyzfynest,
Unfortuantely, no -- Geek Squad Protection plans require that repairs be sought before a product is considered for replacement. This means your current laptop would only qualify for an exchange if one or more of the following conditions are met:
A factory-authorized technician has determined that repairs cannot be completed
A factory-authorized technician has determined that replacement parts cannot be obtained
The unit has accrued two previous qualifying repairs a factory-authorized technician has identified a third qualifying hardware failure
A detailed overview of this policy may be found in your plan documentation, as well as in the sample brochure available on the following site:
http://bbyurl.us/TandC
If your current laptop hasn't been performing up to par, then I'd encourage you to speak with a technician at your local store when you have the chance to do so. Diagnostic services are included in your service plan coverage, so we'd be glad to help find out what's going on.
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

New Mac PRO - Windows 8 Pro Ensure that the disk's controller is enabled in the computer's bios menu

Hello all,
I got a new Mac Pro 2013, and am trying to install windows 8 using the Boot Camp Utility. It creates a 200GB partition, partitioned in FAT. Having done this on my other computers, I usually hit advanced options and then reformat the partition as NTFS. I then install. When i format, I still get this error:
Windows 8 cannot be installed - ensure that the disk's controller is enabled in the computer's bios menu. I'm not sure how to get past this step. I am trying to boot from the windows 8 CD and run setup after I partition the drive. I have the USB key with the apple setup files on it.
What am I missing?

Apparently installing via an ISO fixed this issue for me.

Application launch failed. Ensure that the device screen is unlocked - after the phone update

Similar Messages

Maybe you are looking for