Application Launch Failure Message at Start up

When I restart or start my computer I get the following error message:
Application Launch Failure
The application "Transport Monitor" could not be launched because of a shared library error: "8<Transport Monitor><Transport Monitor><HotSyncLib.PPC>"
I'm not sure what that's about. I click OK and everything works fine. Though I haven't tried to sync anything yet, and I don't know what the Transport Monitor is.
Thanks,
Sonya
iBook G4 Mac OS X (10.3.9)

If you want to sync items with your machine, reinstall Palm Desktop; if not, open the Accounts pane of System Preferences and remove the items related to Palm Desktop from the list of startup items for your account.
(16997)

Similar Messages

Mac G4 Problems with "Application Launch Failure"

I'm not sure if this is the right forum for my questions, so if not, please LMK where I should be asking for help.
I have a G4 running Mac OS X 10.3.9. In the last two weeks, I have had a number of errors involving an Application Launch Failure. This started immediately after I had the foolish idea of shutting down my computer for the night to save power. I selected Shut Down from the drop down menu, the computer shut down and everything seemed ok till the next morning when I started up. Since that time, I have had the application launch failure problem with Word, Excel, PowerPoint, Graphic Converter, Yahoo Messenger, and assorted other programs.
The error message I get is for instance: Application Launch Failure The application "Word" could not be launched because of a shared library error:1<MicrosoftWord> <CarbonLib> <CFMPriv_CarbonCore> " or a variation depending on the program.
I have "restored" the computer, I have reinstalled Mac OS X 10.3.9, reinstalled the relevant Microsoft Office suite, and I still get the error message.
Does anyone have any suggestions (other than getting a new system)?
TIA for any help.
Ronnie Wexler

Boot from the Install CD, but do not Install. Choose Disk Utility off the Installer Menu as your first action. Select your Hard Drive and choose ( Repair ). Repeat until it comes clean (or gets stuck). Then (Repair Permissons ) once.

When I try to open any Appleworks 6 file I get "Application Launch Failure"

When I try to open any Appleworks6 file, I get an "Application Launch Failure" message. It then referes to a "shared library error":
"<Appleworks><MW.MSL.PPC.Shlb><InterfaceLib><>". Is this a memory problem? Can anyone help? Thanks! Greg P.

You will probably get faster help by posting in the AppleWorls forums here:
AppleWorks

Application Launch Failure error message upon start up

I get the following message every time I start my computer. Ijust upgraded to 10.4.4 from 10.3.9 via 10.1 .
Application Launch Failure
The application "Transport Monitor" could not be launched because of a shared library error: "8<Transport Monitor><Transport Monitor><HotSyncLib.PPC>"
Does anyone know what this is related to? I have tried repairing permissions with no luck. Does it have something to do with my Palm desktop software? How else can I try to get rid of it?
Thanks.

I might add, there was this similar problem here which may pertain to your issue:
http://discussions.apple.com/thread.jspa?threadID=277895

Suddenly my Appleworks 6.29 wont open on my Mac G4 sys 10.4.11. Error message is: Application Launch Failure. Shared Library Error. Appleworks MW_MSL_PPC SHLB Interfacelib "

suddenly my Appleworks 6.29 wont open on my Mac G4 sys 10.4.11. Error message is: Application Launch Failure. Shared Library Error. <Appleworks><MW_MSL_PPC>SHLB><Interfacelib><>"

Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If that doesn't help...
Open Console in Utilities & see if there are any clues or repeating messages when trying to open AW6.

Application Launch Failure when starting Office 2004 and Adobe Photoshop

I've had my powerbook G4 for 3 months now with no problems what so ever, but recently my word, exel, powerpoint applications and even adobe photoshop cs give me a:
Application launch failure:
The application "Word" could not be launched because of a shared library error: "3<Microsoft Word><CarbonLib><CFMPriv_ImageCapture>"
i've google this problem for several days with no solution. I've tried, deleting the pref files, reinstalling office, disk verified my hdd. Nothing worked.
Does anyone have an idea what's wrong?
Powerbook G4 Mac OS X (10.4.6) 512MB RAM

Hi, miek. Welcome to the Discussions.
Here is some general advice on troubleshooting shared library errors.
A shared library error, in general terms, implies a missing, corrupted, or incompatible application or operating system framework. Details on frameworks and shared libraries (heavy technical reading) can be found in the "Frameworks" section of the "Software Development Overview" chapter of the Apple Developer Connection document Mac OS X Technology Overview, and the Framework Programming Guide.
Causes for shared library errors include:
• The affected application has been corrupted and must be reinstalled.
• Running incompatible versions of two applications with interdependent shared libraries.
• Disk or permission corruption.
• Corrupted operating system installation.
To resolve shared library errors:
1. As a start, perform a general checkup by running the procedure specified in my Resolving Disk, Permission, and Cache Corruption FAQ.
2. If the problem persists and only one application is affected, uninstall, then reinstall the affected application. See my "Uninstalling applications" FAQ for important advice on uninstalling software.
3. If the problem persists, multiple applications are affected, or the shared library in question is part of the operating system, then reinstall Mac OS X using the Archive and Install process. See my "General advice on performing an Archive and Install" FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Application Launch Failure error when launching various apps

When trying to open several different apps, an error message "Application Launch Failure" displays. The text of the message is:
The application "Flash Professional" could not be launched because of a shared library error: "<Flash> <CarbonLib> <CFMPriv_OpenScripting> "
The application listed depends on the one I am trying to launch. For example, when I try to launch Word the message is:
The application "Word" could not be launched because of a shared library error: "<Word> <CarbonLib> <CFMPriv_OpenScripting> "
I have not made any recent changes to my system and do not know how to resolve. Any suggestions?
Thanks!

I am having the same issue with my Mac Power PC G4. "The application Excel could not be launched because of a shared library error: 2<application><CarbonLib><CFMPriv_LaunchServices>"
I was reading your advice above. I don't have Leopard yet, so I was hoping there was a way to fix this problem with out moving to Leopard.
Also one more thing. This problem started after I did the newest Safari update. Not sure if that has anything to do with it, just thought you might need to know that.
Any help you could give me would be great!

Application Launch Failures after Update: shared library error

Soon after installing the latest Security and Operating System Updates, I discovered that I could no longer run Microsoft Office. I get the following error message when attempting to open any of the components: Application Launch Failure The application "Word" could not be launched because of a shared library error: "3<Microsoft Word><CarbonLib><CFMPriv_CommonPanels>" I have tried reinstalling the updates but it hasn't helped. I can't reinstall Office because the same error message comes up when I try to open the Microsoft installer. Can anyone help? I'm stuck. Thanks.

Again, thanks.
It's somewhat confusing. The folder /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework
contains 3 items, a gray screen marked Common Panels with a small arrow pointing to the lower left edge, a folder marked Versions (which holds folders marked A and Current), a folder marked Current (which has a small arrow pointing to the lower left edge and holds a gray screen marked Common Panels and a folder marked Resources) and a folder marked A (which also contains a gray screen marked Common Panels and a folder marked Resources. When I click the gray screen marked Common Panels, I get a message that there is no default application specified to open the document "CommonPanels".
I'm not sure what all that means. Are there too many Common Panel screens? Does the small arrow have any significance? I've also discovered that, in addition to not being able to run Office, I can't install any new applications (same CarbonLib error message). If you think I need to archive and install the System, I can try to do so.

[B]Application Launch Failure[/B] for Pro Tools

I have a new MacBook Pro 15inch i5 with Logic express pre-installed.
I want to run both Pro Tools and Logic express via my Mbox.
I 'm having problem launching Pro Tools 6.9.2. When I go to launch it I get the following message:
Application Launch Failure
The application "Pro Tools LE 6.9.2" could not be launched because of a shared library error:"<ProTools PPC dbg><Pro Tools PPC dbg><DAE><Ficsetinputmutemodetransition>"
What dose this message mean exactly?. How can I fix this problem?
Is it possible to run Pro Tools 6.9.2 version on the Macbook Pro?
Kind Regards
Richard

Hi Richard and welcome to Discussions,
if I read this chart http://www3.digidesign.com/index.cfm?navid=54&itemid=23639 correctly, then the answer is no.
6.9.2 does not work on Intel-based Macs and Snow Leopard 10.6
Sorry
Stefan

Application Launch Failure -- Transport Monitor

Since reloading Tiger (and all the updates) early this week, I have started seeing this error upon restart:
Application Launch Failure
The application "Transport Monitor" could not be launched because of a shared library error: "8<Transport Monitor><Transport Monitor><HotSyncLib.PPC>"
Huh? Perhaps this has something to do with my .Mac sync icon spinning forever on my menu bar...
Can anyone translate this foreign language and suggest corrective actions?
Thank you!

Ok so im assuming you ran an archive and install. There should be a folder in Macintosh HD that says Previous Systems (n). n is the number of previous systems eg 1, 2, 3. Open that folder, go to users and open up the shared folder. You can copy its contents to your new shared folder in your new users folder. When you run an archive and install, your shared folder gets moved into the previous systems folder and a new shared folder is created that is empty. You need to fill up that shared folder. Try it out and see if it will work.

Application Launch Failure - CarbonLib

Hello,
I have a shared library error refered to CarbonLib. When I try to install new applications or sometimes when i launch an application it gives me this error :
Application Launch Failure
The application "XXX" could not be launched because of a shared library error : "<XXX><XXX><CarbonLib>"
Any ideas of how can i solve this problem. Need to reinstall CarbonLib library? and if so, how-to do it .... Thanks for any help, Fernando
iMac 24" Core Duo | Macbook Pro 15,4" Core Duo Mac OS X (10.4.10)

Welcome to Apple Discussions Leon!
Please start a new topic thread here:
http://discussions.apple.com/forum.jspa?forumID=752&start=0
You'll get a wider audience, while ensuring the original user will get more focussed attention on their problem. Despite similarities, I think your problem may be different.

Application Launch Failure (Excel, Word and some other programs)

Error message on the screen:
Application Launch Failure
The application "Word" could not be launched because of a shared Library error: "<Microsoft Word><Microsoft Word><CarbonLib>"
Console Message:
10/10/09 9:21:15 PM [0x0-0xd40d4].com.microsoft.Word[1477] /Applications/Microsoft Office 2004/Microsoft Word[1477] Launch failed with error code -2804 (cfragNoLibraryErr) for application /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp
10/10/09 9:21:15 PM com.apple.launchd[1334] ([0x0-0xd40d4].com.microsoft.Word[1477]) Exited with exit code: 12
This also happens with Excel, Word and some other programs.
Anyone have any ideas?

Oops, I should have mentioned that I've repaired permissions both from a DVD bootup as well as from the current hard drive. I reinstalled the last update.
I have Time Machine so I guess I could go back to a previous state if I knew what the problem was.

"Application Launch Failure" at startup -- why?

At startup I am now getting a window saying "Application Launch Failure" with a big red stop sign and white exclamation mark.
The text says, "The application 'Transport Monitor' could not be launched because of a shared library error: '8<Transport Monitor><Transport Monitor>HotSyncLib.PPC> '
What can I do to fix this? (I've run Disk Utility and Disk Warrior, but the window still appears.)
Thanks for any help you can give me.
Duncan
Mac G4 Mac OS X (10.4.7)

From the error message, the application Transport Monitor failed to launch because it cannot find the library HotSyncLib.ppc. Perhaps you deleted or removed items related to Palm Desktop. If you no longer need this capability you can remove Transport Monitor from your Login items (see Accounts preference pane).
bd

MacBook     Application Launch failure    the application "word" could not be launched because of shared library error " Microsoftword "

Help!!!   Application Launch Failure      the application "word" could not be launched because of a shared library error   "<microsoftword><><><>"
Anyone know?   APPRECIATE IT IF YOU DO!!

I installed Palm Desktop 4.2.1 Rev A for Mac and am getting the same error: The application "HotSync Manager" could not be launched because of a shared library error: "<HotSync Manager><HotSync Manager><HotSyncLib.PPC><SetConfigureConduitCallBack>". I also then get an Unexpected error #-10810 message. I haven't even tried one sync yet. I tried running the suggested fix to this posting, but it didn't work either.
Any help would be greatly appreciated.
Thanks.
Post relates to: Palm IIIxe is the PDA I would like to sync using 4.2.1
Message Edited by Youngks on 08-29-2008 05:56 PM

Application launch failure because of shared library error!!!!!

I have been using photoshop for over a year now and I went to open it up and I get this error, Application Launch Failure, The application "Photoshop" could not be launched because of a shared library error: "/<application><CarbonLib><CFMPriv_CarbonSound>"
Then when I open up the console log it comes up with error code -2820, which I cannot find anywhere. Please help before I scream!

I'm not sure if folks in the "AppleScript" forum will be able to help much. You might get better results posting in a forum that deals more with third party apps like Photoshop. Maybe in Using Mac OS X Tiger.
I have been using photoshop for over a year now and I
went to open it up and I get this error, Application
Launch Failure, The application "Photoshop" could not
be launched because of a shared library error:
"/<application><CarbonLib><CFMPriv_CarbonSound>"
Then when I open up the console log it comes up with
error code -2820, which I cannot find anywhere.
Please help before I scream!
Error -2820 is from the Code Fragment Manager and means "A fragment's container was corrupt". So it sounds like "CFMPriv_CarbonSound" may have gotten corrupted in some way.
My machine doesn't seem to have anything called "CFMPriv_CarbonSound" on it (but I don't have Photoshop installed). So I suspect it's a library that comes with Photoshop or with a Photoshop plug-in.
You might try doing a "Repair Permissions" and/or a "Repair Disk" in Disk Utility to see if that helps. But, if you don't get any other suggestions the only other thing I can think of would be to try a clean install of Photoshop.
Steve

Application Launch Failure Message at Start up

Similar Messages

Maybe you are looking for