Application Manager - Server Not Responding

I am running Mac OS X 10.7.3.
The Application Manager reaches the end of a download and stops. It says "Server not responding. Please check your internet and firewall settings.".
After waiting several minutes, sometimes the program will install. Are the Adobe servers severely overloaded?

Similar Messages

Could not download application Illustrator a Flash builder. Server write "Server not responding try again later" - 5 day

Have a nice day
I can not download Adobe Illustrator cc 2014 and Update for the Admin Console to create an installation package. Also not download Flash Builder Premium. On both writes System Server not responding try again later and it takes five days. You can fix the error?
thank you

Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Business Object Designer Server Not Responding (SBO0001)

Hello! I receive this error after importing the universe in BO Designer and clicking on Universe Parameters.
Server Not Responding (SBO0001)
and when I click details it says:
DBD: [Microsoft][ODBC Driver Manager] The specified DSN contains an architecture mismatch between the Driver and Application
I receive it when I test the database connection. I am using Windows 7 and when I go into ODBC Administrative Tools and test it works fine. Any help would be greatly appreciated.
Thanks,
Jen

Please install the BO Clients tools XI 3.1 Service Pack 3 Full version . Windows 7 is supported only for XI 3.1 SP3 and higher.
You have to upgrade your BOBJ server also (Client and server should be at the same version).
And please install the 32bit database drivers. BO is 32bit and altough it runs on 64bit OS ithout a problem, it can only use 32bit libraries/drivers.
Regards,
Stratos

Query server not responding (SPFEI02) -- SharePoint 2007 version Enterprise Edition.

We noticed that the Intranet Content Incremental Crawl started on 12/8/2014 at 5.00 PM CST is still not completed and currently it is in Hung state waiting for the propagation
to be completed as the QUERY server not responding "SPFEI02”. Following are the quick status currently on Search in Intranet.
There is no Index corruption recorded on the Index server.
There is no Index corruption recorded on both the Query server’s.
Search functionality is working fine in Intranet application.
We tried with restarting the "Office SharePoint server search" service under Services.msc of CPBPSPFEI02 server but didnot help us.
Verified the Search account status,accessibility of the network path from Index server to the WFE (Query server role) and also the permission settings on the index folder present on CPBPSPFEI02 and everything looks good. Last weekend we had Windows Patch
updation process completed on this server.
Could you please help us how to fix this issue with out any index corruption and also in the search functionality disruption on the application.
Environment Details
1) MOSS 2007 SP2 platform with license type Enterprise Edition
2) 2 WFE's,1 APP server and 2 DB servers ( 1 clustered DB server and 1 DB server attached to Farm)
Thank You

Hi,
Please check
Indexing Schedule Manager timer job.whether it's working or not ?
This could be a probable reason to hang the search crawl.
Regards
Soni K

All crawl jobs are failing with errors, Query server not responding.

Hi All,
I'm facing issue with search service , one of the Query server not responding and all the crawl jobs are throwing errors.
Errors:
"The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site )"
"The object was not found. ( Error from SharePoint site: HttpStatusCode NotFound The request failed with HTTP status 404: Not Found. )"
Please suggest some resolutions.
Pavan

Hi Pavan,
1. First verify as given in this article - https://support.microsoft.com/en-us/kb/2323206?wa=wsignin1.0
2. If not 1 resolves issue then try to disable the anonymous access on the default zone web application(in content source)
3. Also check this article if above two steps does not resolve the issue - http://www.sharepointtechs.com/the-sharepoint-item-being-crawled-returned-an-error-when-requesting-data-from-the-web-service-error-from-sharepoint-site-value-does-not-fall-within-the-expected-range
4. If none of the above works then install this CU update http://support.microsoft.com/kb/2596505 and
then re-run you SP Configuration Wizard and restart your SharePoint Server. But before installing this CU on your SharePoint Server ensure your have the latest backup.
4. If all above does not work then remove
the anonymous access (if enabled) and restore the site collection to a new new site.
Please remember to click 'Mark as Answer' if the reply answers your query or 'Upvote' if it helps you.

AUSST fresh synchronization - server not responding ...

Hello. We have just subscribed a number of people to CCT. I have created the necessary packages successfully. Now, I am in the process of setting up AUSST for the first time. I have tried on both a Windows Server 2003 SP3 and Windows Server 2008R2 server with the same results. It gets to a certain point and then seems to timeout. See command prompt text below.
Is this simply network conjestion somewhere and I just have to keep trying until I jag it sometime? We have a 10Mb Fibre connection and I am doing it at a quiet time of the evening. Therefore, I don't think its my end.
Any other ideas?
Here is a copy of the command prompt:
C:\Documents and Settings\Administrator.BW\My Documents\Downloads\AUSST>AdobeUpdateServerSetupTool --root="\websites\adobeupdates\cct"
Choose one of the following options :
1. Fresh Synchronization.
2. Incremental Synchronization.
3. Generate Client Configuration XML.
4. Migrate to an In-House Server.
5. Exit.
Your choice: 1
Fresh Synchronization chosen.
Folder exists at given root path! All the contents of the folder will be deleted.
Enter 'Y' to continue or any other key to exit: Y
Processed 21 out of Server not responding. 1048 items. \
Processed 25 out of 1048 items.
Error in 2 items.
AdobeUpdateServerSetupTool returned with code: 5.
For more information refer AdobeUpdateServerSetupTool.log at C:\DOCUME~1\ADMINI~1.BW\LOCALS~1\Temp\1\ .
Here is a copy of the log:
09/03/13 17:51:58:102 | [INFO] | | AAMEE | Utilities | AUSST | | | 2780 | Rootpath = \websites\adobeupdates\cct
09/03/13 17:52:09:868 | [INFO] | | AAMEE | Utilities | AUSST | | | 2780 | Folder exists at given root path! All the contents of the folder will be deleted.
09/03/13 17:52:13:337 | [INFO] | | AAMEE | Utilities | AUSST | | | 2780 | Item downloaded \websites\adobeupdates\cct\webfeed\oobe\aam10\win\.
09/03/13 17:52:13:837 | [INFO] | | AAMEE | Utilities | AUSST | | | 2780 | Item downloaded \websites\adobeupdates\cct\webfeed\oobe\aam10\win\.
09/03/13 17:52:14:650 | [INFO] | | AAMEE | Utilities | AUSST | | | 2780 | Item downloaded \websites\adobeupdates\cct\webfeed\oobe\aam20\win\.
09/03/13 17:52:15:134 | [INFO] | | AAMEE | Utilities | AUSST | | | 2780 | Item downloaded \websites\adobeupdates\cct\webfeed\oobe\aam10\mac\.
09/03/13 17:52:15:618 | [INFO] | | AAMEE | Utilities | AUSST | | | 2780 | Item downloaded \websites\adobeupdates\cct\webfeed\oobe\aam20\mac\.
09/03/13 17:52:16:056 | [INFO] | | AAMEE | Utilities | AUSST | | | 2796 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\PhotoshopCameraRawForElements10-6.4\6.7 .040\.
09/03/13 17:52:16:056 | [INFO] | | AAMEE | Utilities | AUSST | | | 2792 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\PhotoshopCameraRaw-6.0\6.7.040\.
09/03/13 17:52:16:087 | [INFO] | | AAMEE | Utilities | AUSST | | | 2788 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AdobeDrive3-3.0.0\3.2.0\.
09/03/13 17:52:17:368 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\PhotoshopCameraRawForElements10-6.4-x64 \6.7.040\.
09/03/13 17:52:18:634 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AAMEE-2.0\2.1.0\.
09/03/13 17:52:23:306 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AAMEE-2.0\2.1.0\.
09/03/13 17:52:24:353 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11cs_CZ\2.0.1\.
09/03/13 17:52:25:134 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11de_DE\2.0.1\.
09/03/13 17:52:26:134 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11en_US\2.0.1\.
09/03/13 17:52:28:588 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11es_ES\2.0.1\.
09/03/13 17:52:29:322 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11fr_FR\2.0.1\.
09/03/13 17:52:30:619 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11it_IT\2.0.1\.
09/03/13 17:52:31:400 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11ja_JP\2.0.1\.
09/03/13 17:52:32:588 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11ko_KR\2.0.1\.
09/03/13 17:52:34:010 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11nl_NL\2.0.1\.
09/03/13 17:52:37:651 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11pl_PL\2.0.1\.
09/03/13 17:52:38:697 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11pt_BR\2.0.1\.
09/03/13 17:52:40:072 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11ru_RU\2.0.1\.
09/03/13 17:52:41:151 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11sv_SE\2.0.1\.
09/03/13 17:52:41:526 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11tr_TR\2.0.1\.
09/03/13 17:52:41:901 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11zh_CN\2.0.1\.
09/03/13 17:52:42:698 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIR2ForFlashPro11zh_TW\2.0.1\.
09/03/13 17:52:43:401 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIRforIOSFlashBuilder2.6\2.6.1\.
09/03/13 17:53:33:824 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AIRforIOSFlashBuilder2.6\2.6.1\.
09/03/13 17:53:35:027 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AdobeAPE3_Win64_NoLocale\3.1\.
09/03/13 17:54:32:465 | [INFO] | | AAMEE | Utilities | AUSST | | | 2788 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AdobeDrive3-3.0.0\3.2.0\.
09/03/13 17:54:32:840 | [INFO] | | AAMEE | Utilities | AUSST | | | 2788 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AdobeAPE3_Win_NoLocale\3.1\.
09/03/13 17:54:32:996 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AdobeAPE3_Win64_NoLocale\3.1\.
09/03/13 17:54:34:231 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AdobeAfterEffectsCS5-10-Retail\10.0.1\.
09/03/13 17:54:39:637 | [INFO] | | AAMEE | Utilities | AUSST | | | 2796 | Item failed \websites\adobeupdates\cct\updates\oobe\aam10\win\PhotoshopCameraRawForElements10-6.4\6.7 .040\Setup.zip.
09/03/13 17:54:39:778 | [WARN] | | AAMEE | Utilities | AUSST | | | 2796 | Unable to download update file \websites\adobeupdates\cct\updates\oobe\aam10\win\PhotoshopCameraRawForElements10-6.4\6.7 .040\Setup.zip
09/03/13 17:54:39:778 | [ERROR] | | AAMEE | Utilities | AUSST | | | 2796 | Server not responding.
09/03/13 17:55:00:731 | [INFO] | | AAMEE | Utilities | AUSST | | | 2788 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\AdobeAPE3_Win_NoLocale\3.1\.
09/03/13 17:55:58:029 | [INFO] | | AAMEE | Utilities | AUSST | | | 2800 | Item failed \websites\adobeupdates\cct\updates\oobe\aam10\win\AdobeAfterEffectsCS5-10-Retail\10.0.1\S etup.zip.
09/03/13 17:55:58:154 | [WARN] | | AAMEE | Utilities | AUSST | | | 2800 | Unable to download update file \websites\adobeupdates\cct\updates\oobe\aam10\win\AdobeAfterEffectsCS5-10-Retail\10.0.1\S etup.zip
09/03/13 17:55:58:748 | [INFO] | | AAMEE | Utilities | AUSST | | | 2792 | Item downloaded \websites\adobeupdates\cct\updates\oobe\aam10\win\PhotoshopCameraRaw-6.0\6.7.040\.
09/03/13 17:55:58:748 | [INFO] | | AAMEE | Utilities | AUSST | | | 2780 | Item: \websites\adobeupdates\cct\updates\oobe\aam10\win\PhotoshopCameraRawForElements10-6.4\6.7 .040\
09/03/13 17:55:58:748 | [INFO] | | AAMEE | Utilities | AUSST | | | 2780 | Item: \websites\adobeupdates\cct\updates\oobe\aam10\win\AdobeAfterEffectsCS5-10-Retail\10.0.1\
09/03/13 17:55:58:748 | [INFO] | | AAMEE | Utilities | AUSST | | | 2780 | AdobeUpdateServerSetupTool Returned with code: 5.
Regards
Ian.

Thanks Sumita and Philadendron.
I have tried both fresh and incremental sync at various times of the day up to about 11pm AEST. They have all failed at around the 20 items mark.
As 99.9% of our staff work 8am to 6pm, bandwidth after 6pm is not a problem. As i indicated before, we also have a 10Mb Ethernet over Fibre connection. My firewall (pfsense) graphs the bandwidth in realtime. When I start AUSST, I see the bandwidth reach 10Mb until AUSST fails and the bandwidth use returns to its normal very low level.
I usually have no problems downloading large programs from companies such as Autodesk or Linux (4GB) DVD ISO files from CentOS etc. This is something I usually do during the evening and find the bandwidth available more than adequate.
I think my setup is somewhat different to yours, Philadendron. Here are some details:
Our fibre terminates at a Cisco router (don't recall model) configured as a bridge. This is connected to a dedicated NIC on one our ESX4 hosts. Our firewall is pfSense 2.0.3 running as a VM on the ESX host. Our ESX hosts connect to the LAN through a HP 2810-24G switch. Our ESX hosts are HP DL380G6's with a mix of Intel and Broadcom NICs. I'm not sure which NIC is dedicated to the WAN.
The first machine i tried AUSST on was Windows Server 2003 running as a KVM VM on a CentOS 6.4 (x64) host. This host hardware is an old Dell Poweredge 840. It is connected to the same HP2810 switch as the ESX hosts.
The other machine I have tried is a HP Probook 6560b laptop running Windows 7 Pro x64. It is connected to a small desktop switch in my office. This in turn is connected to LAN switch in the server room. The LAN switch is connected to the HP2810 via 2 x 1Gb aggregated links.
In both cases, the LAN IP of both machines is configured to completely bypass the firewall proxy server (squid). In fact, I have even disabled squid completely to see if this made any difference. It didn't.
There is no bandwidth throttling. In fact, I was wondering if bandwidth throttling might work. Perhaps the adobe update server is getting overwhelmed by the speed of the requests. That doesn't seem plausible but when nothing else seems to be working, I usually start looking at the less plausible options. When I get a chance, I may try AUSST from a regional office using a Telstra ADSL2+ WAN link. These are considerably slower than our 10Mb fibre link. However, I don't really expect any difference.
I also don't want our staff all downloading the updates individually. However, at this stage we only have 4. So it is somewhat easier to manage than 20+!
If I think of anything, I will update this thread. However, I don't believe it is at our end unless something is going on with our service provider (Telstra). This is highly unlikely though.
Regards
Ian.

HT4907 iCloud server not responding

I have the message "Back to My Mac isn't working properly because the server isn't responding". I tryed to turn off Mack to My Mac and I tryed again but nothing changed?
Can somebody help me what to do?

I was having the same problem but found a solution that worked for me.
1. From the iCloud System Preferences pane, uncheck the Back to My Mac checkbox to turn it off.
2. Open the Keychain Access app (in Applications/Utilities).
3. Click the "System" keychain (You'll see keychains near the upper left of the app window).
4. Make sure "All Items" is selected in the "Category" box below.
5. In the results showing to the right, look for any key whose "Kind" is "Back to My Mac key."
6. Delete the key(s), authenticating with your password to do so.
7. Back in the iCloud System Preferences pane, re-check the Back to My Mac box.
At this point, Back to My Mac started and the "server not responding" message did not appear.
I'd tried unchecking and re-checking several times before to no avail. I hope it works for everyone.
Maybe the keys we had were tied to MobileMe and became invalid when MobileMe shut down?

Zcm 11.2.4 preboot server not responding

At least since update 11.2.4 can no longer do imaging. I am pretty sure I was doing imaging fine in 11.2.3a, certain in the 11.2.2 level.
receive
"Preboot server not responding. The product license might have expired."
is not expired, license state shows active for configuration management.
client does PXE to maintenance mode just fine and I can ping the zcm server just fine by short or long name from the maintenance mode prompt.
cannot send or receive images, have tried on a couple different systems.
I don't believe any else has changed in the network except for the ZCM update from 11.2.3a to 11.2.4
Any help would be appreciated.
Thank you,
Mike

Hi
Same issue here. I can start the "novell-pbserv" service and it reports "running". All other services are running.
PXE boot OK but as soon as i try to image a device age and get the message mentioned above and
[DEBUG] [11/21/2013 11:10:29.000] [27974] [pbserv] [27974] [] [pbserv] [] [(LicenseCheck) Checking Imaging License] [] [] [] [Imaging]
[DEBUG] [11/21/2013 11:10:29.000] [27974] [pbserv] [27974] [] [pbserv] [] [(RNT) Server GUID is: 5f6b896d2536c94b8789427cdb74a2cc] [] [] [] [Imaging]
[DEBUG] [11/21/2013 11:10:29.000] [27974] [pbserv] [27974] [] [pbserv] [] [(RNT) Imaging License Info: 1] [] [] [] [Imaging]
in the novell-pbserv.log
"/etc/init.d/novell-pbserv status" then reports "Novell Zenworks Imaging Service unused but pidfile exists".
Cheers

Speech recognition server "not responding"

speech recognition server" "not responding" constantly in Activity Monitor and it is Highlighted in RED
Anybody seen this before?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Mail Problems - SMTP server not responding: "offline"

I am currently testing DSL service for a month; set up Mail just before I downloaded the 10.7.3 release. Tested it once and it worked; did not use it to send emails since because I am only testing this (including the email address). I have been receiving emails (which I forwarded to myself from my cable provider's website); today, I wanted to send an email and a 6 hour troubleshooting saga began....
Total of 2 hours with Centurylink tech support; 1 1/2 hours with Applecare, and another 30 minutes with Centurylink.
During that time, all different settings were tried, turned on/off. POP server ok, SMTP server not responding. With Applecare, tried it on both the iMac and the Macbook; also tried it after booting into Snow Leopard - SMTP server not responding ("offline"). Applecare tech stated that it has to be the server since we tried it on two machines as well as SL. Centurylink insists there is nothing wrong with their server, but it's Mail's fault.
So, I finally gave up for the evening, but wonder if there is something amiss with Mail in 10.7.3 (both machines are on the same version) and during the troubleshooting, I noticed an anomaly: in a new message window, there was no choice to choose an account to send from which I thought was odd.
I was thinking of a new install or to clone back? My clones are up to date though, I have no older clones. I do have a fresh install but it's also the latest one from MAS. Or I could just boot from the fresh install and set up Mail to see if it would work?
Grateful for any ideas....

Thanks to everyone; as you can imagine, all settings/configurations were tried yesterday (even booting into SL); Apple said it's Centurylink's fault, and they insisted there was nothing wrong with their server.
FWIW, I unplugged my Comcast cable (it is still active though and I'm getting TV reception, just unplugged the modem for now); right now, my internet access and email account are with Centurylink for the test. I still access my Comcast mail via their web interface email account.
Anyway, thanks to a good friend's idea, I decided to check keychain access and to make it short: the issue is fixed and the problem definitely had something to do with the OS because:
When I first checked keychain, this is what I saw:
I then checked Comcast settings and there were two: one was checked "allow all apps..." and the other had the "confirm" with Mail listed under the applications.
So I figured it's so screwed up, I probably can't make it any worse, so I deleted the Internet Accounts and added Mail to the smtp.centurylink...:
And......... it then worked! These default "internetaccounts" obviously aren't being recognized by Centurylink's server?
And, to make sure that was it, I not only did the same thing on the Macbook, but also booted into a pristine "backup" fresh install (no added apps or files, just default OS), launched Mail and couldn't send. Launched Keychain, changed the apps to Mail, and I was able to send email.
I would call that a bug? Or not? In any case, I'll be calling back Applecare and tell them to add the above to the very long log from yesterday and to make a note that "internetaccounts" doesn't work with everything.

NVIDIA GeForce GTX 770 Mac/Adobe QT32 Server (Not Responding)

Has anyone else used a NVIDIA GeForce GTX 770 4GB on a mac in AE? We just got one from Macvidcards and AE seems really slow starting and closing.
In fact when you quit the MediaCore then hangs for ages when you restart. I edited the supported Raytracer setting and it is seen and can use Cuda.
Also is anyone still getting "Adobe QT32 Server (Not Responding)", every time you start AE? If you look in process viewer it shows up.
Mid 2010 Mac pro
AE Version 13.1.1.3
Mac os x 10.10.1
NVIDIA GeForce GTX 770 Mac 4gb
32GB RAM

fixing permissions problem that impedes start of Adobe applications
And, if that's not it: troubleshooting QuickTime errors with After Effects

Adobe cloud application manager - can not connect to internet

To ADOBE - The Adode cloud Order no is DSSY006786009DT and is current
The Adobe cloud application manager - can not connect to internet even though there is internet connection and says it might be time zone error but that is correct - Sydney Australia
Question:
1. Is anybody else having this problem
2. How do we fix
I already changed the time zone east coast US - did not change anything
Could it be a corrupt program - thus requiring to reinstall program Application manager
I am using Windows 7.
It has been like it for ten days - It asks to log in everytime I turn computer on
All programs in Creative Cloud work
Any suggestions and solution
Online help and phone help had no solutions other than what I suggested - that is reload application manager
Thanks for help
Ian Cleland

The Creative Cloud File Synching was just offline, should be online now again.
See top off: http://forums.adobe.com/community/creative_cloud/creative_cloud_connection
Maybe that was your problem.

Problem with premiere and encore export, Adobe QT32 Server (Not Responding)

I could help.
When exporting to Encore or Premiere, the program block.
In the Activity Monitor shows me these two errors:
Adobe QT32 Server (Not Responding)
PPro Headless (Not Responding)
Technical Specifications:
MAC OS X 10.9.5
Adobe Suite CS6
graphics card: AJA KONA LHi
Can you help me please
Thank You

Have you checked out this post from Adobe? I know it says for After Effects but it definitely applies to Premiere too. We have some AJA cards whose components in /library/QuickTime were causing similar Adobe QT32 server hangups; removing them solved our issue but also broke compatibility with older apps like FCP 7.

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...

I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:?

HT1338 XSERVE 10.6.8 is running very slow, and Workgroup Manager is not responding

XSERVE 10.6.8 is running very slow, and Workgroup Manager is not responding. There is no more updates to download.

munish khanna wrote:
1. upgrade to lion, which should over write previous software and the reasons for it being slow.
No, you don't want to upgrade over a buggy system, Lion has issues of it's own that will only complicate matters, plus Lion is slower than Snow Leopard.
Learn all the pitfalls before you upgrade to Lion, like all your Rosetta/older programs will no longer work and more.
Leave Lion for a new hardware purchase is my advice, it's still got plenty of security and other issues.
For your performance, your likely better off replacing the hard drive with a 7,200 RPM model and maxing the RAM, download the free MacTracker to find out your specs, and OtherWorld Computing is good for videos, tools and parts.
http://eshop.macsales.com/installvideos/
2. Format the hard disc and reinstall snow leopard.
That will work, provided your data is off the machine first.
Now how do i reinstall snow leopard as it was an online purchased upgrade from leopard.
The 10.6 Snow Leopard disk that you upgraded 10.5 Leopard from actually has the full OS X 10.6 on it.
All you have to do is stick the disk in and hold the c key down while booting, use Disk Utility to erase the entire drive, quit and install 10.6.
Of course your not going to get the free iLife that came with the 10.5 grey disks, see if you can first install 10.5 with the same methods, then setup with the same user name as before, then upgrade to 10.6
I think Apple nulled booting off the 10.5 disks, but it won't hurt to try.
Another method would be to install 10.6 fresh by itself, then use the program called Pacifist to extract iLife from the 10.5 disks.
http://www.charlessoft.com/
Read here for plenty of how to's
https://discussions.apple.com/message/16276201#16276201

Application Manager - Server Not Responding

Similar Messages

Maybe you are looking for