Application message help could not be called Message in SABAPDOCU888

Hi,
After the application of the Support Package 21 in the DEV, help is not functioning correctly, for example, in top of word WRITE (in a publisher ABAP), I pressure F1, opens help correctly, from there pressed in Output you the a list and I go until the end of the one in the point of Additional help. In that pressed Creating Lists, returns me the Application message help could not be called (Message in. SABAPDOCU888).
What I must make?
Debtor for the attention
Rogério Aranda

I had the same problem when I installed Firefox 3, but I think the problem is due to my recent hard drive upgrade. Try changing the download location from "Desktop" in Microsoft Internet Explorer and all other browsers (Safari, Firefox, etc.) to whatever default location you prefer. I never use Internet Explorer, but I think somehow my settings were corrupted when I upgraded my hard drive. I found this solution on another site also.

Similar Messages

Help: could not open iphoto: message "you can't open the application iphoto because it may be damaged or incomplete".

Help: could not open iphoto: message "you can't open the application iphoto because it may be damaged or incomplete".

Greetings,
It sounds like the iPhoto application is damaged and needs to be reinstalled.
Follow this article: http://support.apple.com/kb/TS3249
Cheers.

TS1702 My iphone has displayed a warning message two days ago that if i dont ..... i cannot purchase anymore applications but I could not read the first sentence and now I am unable to purchase

My iphone has displayed a warning message two days ago that if i dont ..... i cannot purchase anymore applications but I could not read the first sentence and now I am unable to purchase

That error message suggest you have a permissions issue. Make sure you have full read/write privileges for the Drive/ Folder location that you are copying the files to.

CUPC - "Phone Error. Could not place call because you have no audio device or sound card."

Periodically throughout the day, CUPC will not make or receive calls, but instead presents a dialog box with the message "Phone Error. Could not place call because you have no audio device or sound card." See attachment.
Signing out of and back into CUPC resolves the issue temporarily.
I have version 8.6.2 installed and I'm using a USB headset.
Does anyone know what might be causing this?

Hi Steve,
I have users reporting this as well with Jabra GN 2000 headsets. They claim using a different headset resolves it which I'm waiting to confirm but I was wondering if you were able to figure this out.
Thanks
Erik

Graphical Form Painter could not be called

When Im in se71 and click on the pushbutton Layout in the header form I get an error message 'Graphical Form Painter could not be called (FORMPAINTER_CREATE_WINDOW)'. What does that mean and what should have been displayed when I pushed that button?
Thanks
Peter

Thanks for that information, but it does not display a graphical tool and I get the following error message 'Graphical Form Painter could not be called (FORMPAINTER_CREATE_WINDOW)'. Can anyone explain how I can fix that?
Thanks
Peter

Hi. I am a uk iPhone 5 user and will be travelling to Spain next week. Last time I went to Spain in September I could not receive calls on my phone despite having Vodafone euro traveller. I am asking what I can do to rectify this before I travel

Hi. I am a uk iPhone 5 user and will be travelling to Spain next week. Last time I went to Spain in September I could not receive calls on my phone despite having Vodafone euro traveller. I am asking what I can do to rectify this before I travel as it was really difficult to sort out once I was abroad. Please help as I'm not the best with technology. Thanks

Hi,
Is your phone locked to a carrier? If so, you will need to contact the carrier to find out what international SIM cards (if any) you can use when travelling.
Cheers,
GB

How do I stop the dialog, "The Application "Transport Monitor" could not be launched because..." from appearing?

The dialog appears exactly like this, "The application "Transport Monitor" could not be launched because of a shared library error: "h<__ct__16CTransportRelMacFP18OpaqueTransportRefUc>"
I tried to get this resolved by following the Solution ID: 14020. Here is the problem. There is NO "Install Utility" in any of the Palm Desktop Installer file (either on the CD or downloaded from the website).
In addition, I uninstalled Missing Sync the deleted Palm. I then re-installed Palm and Missing Sync respectively. The problem persists.
Help!
Post relates to: Treo 650 (Cingular)

Ok,
I have been thrashing on this one for a while. PLEASE, PLEASE, if this helped you pass this along to other forums because there are tons of people out there with this same issue and NO USEFUL information from PALM to fix it.
The fix is easy. Basically the problem is that there is a remaining process running in FreeBSD subsystem that must be stopped in order to reinstall the hotsync/palm application correctly.
Log in as root/administrator
Go to terminal and type:
ps -ax | grep -i palm
this will show all processes that are running in the system that are part of the palm software.
note the process number (on the left) of the list.
killl nnn
i.e if the left column says 654 type "kill 654" and hit enter
now do the ps -ax again and make sure the process stopped.
This also fixes that other issue when you try to empty the trash and you get an error that says Localized.rsrc is in USE. blah , blah, blah
Now reinstall the palm software and breath a big sigh of relief. Have a beer and sync your palm.
..jeff

The Applications File Server could not open the file

Hi All,
We have shared appl_top between 2 nodes.
When running concurrent request such as active user report, i got the following error:
The Applications File Server could not open the file oXXXXX.out for read
I have found metalink note
The Applications File Server could not open the file o611681.out for read (Doc ID 1311372.1)
The $APPLCSF are all fine and so are the permissions.
I found out if i start my primary node first, wait till concurrent manager start, then start second node, it would be ok.
is this recommended practice?
i thought i can start up all node at the same time.
am i right to say that the last node run adautocfg is the primary node?
Thanks in advance

I found out if i start my primary node first, wait till concurrent manager start, then start second node, it would be ok.
is this recommended practice?Do you have PCP implemented? If yes, you do not need to start the CMs on the second node and running adcmctl.sh script on the first node would be enough.
i thought i can start up all node at the same time.What exactly do you start?
am i right to say that the last node run adautocfg is the primary node?Please explain what components are running on each node.
All the URLs Accessing EBS Are Getting Redirected to the Web Node Where Autoconfig Last Ran [ID 1349509.1]
Thanks,
Hussein

Application Error Memory could not be read(Please Help)

Hi
I need help.
I am using Adobe Photoshop CS4 Extended Student Edition.
My computer is Windows XP
I continue to get the error Photoshop exe Aplication Error
Instructions at oxofa92c5b sometimes is states oxofc42c5b
reference memory oxoooooo28 Memory could not be read
Cancel or debug. Then it shuts down.not matter what you click.
It does this after I get the picture open and when I click on different tools.
This is newly installed on my computer and newly bought program.
Help would be greatly appreciated.

Those "bad memory" errors are usually caused by one of two things
One (fairly rare) is an actual bad memory stick
Two (most often) is a bad device driver... these are really hard to narrow down to the actual cause
Some things to try...
Go to the motherboard vendor and make sure you have the latest device drivers for your brand/model motherboard
Also make sure you have the latest device drivers for your brand/model video display card
Finally, any other device drivers you had to install

The web application at [URL] could not be found.

Hi,
I am trying to run a simple code like finding all the users in the SharePoint site.
But I am seeing this error constantly no matter what I do!!
The Web application at [https://xxxxxx] could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application.
I've looked into all the answers on the forums but still stuck with this error.
I am a beginner in SharePoint, and I am really not sure about the AAM and IIS settings that needs to be set inorder to get rid of this error.
If someone could point me in right direction that targets beginners that would be really helpful.
Also, I noticed that my IIS is blank on the dev server that I am working on with Visual Studio and SharePoint installed on it.
Is this something that is causing this error?
Thanks

Note: you need to enter the SharePoint site URL
To authenticate:
f you are connecting to office 365 then use the following code:
using (srcContext = new ClientContext(txtUrlFrom.Text))
SecureString passWord = new SecureString();
foreach (char c in txtPasswordFrom.Text.ToCharArray()) passWord.AppendChar(c);
srcContext.Credentials = new SharePointOnlineCredentials(txtUserNameFrom.Text, passWord);
if you are using on premise SharePoint 2013 use this code:
using (srcContext = new ClientContext(txtUrlFrom.Text))
NetworkCredential credentials = new NetworkCredential(txtUserNameFrom.Text, txtPasswordFrom.Text);
Example to retrieve data:
Web srcWeb = srcContext.Web;
List srcList = srcWeb.Lists.GetByTitle(srcLibrary);
ListItemCollection col = srcList.GetItems(new CamlQuery());
srcContext.Load(srcList.RootFolder);
srcContext.Load(srcList.RootFolder.Folders);
srcContext.Load(col);
srcContext.ExecuteQuery();
to retrieve users:
Private void GetData(object obj)
MyArgs args = obj as MyArgs;
try
if (args == null)
return; // called without parameters or invalid type
using (ClientContext clientContext = new ClientContext(args.URL))
// clientContext.AuthenticationMode = ClientAuthenticationMode.;
NetworkCredential credentials = new NetworkCredential(args.UserName, args.Password, args.Domain);
clientContext.Credentials = credentials;
RoleAssignmentCollection roles = clientContext.Web.RoleAssignments;
ListViewItem lvi;
ListViewItem.ListViewSubItem lvsi;
ListViewItem lvigroup;
ListViewItem.ListViewSubItem lvsigroup;
clientContext.Load(roles);
clientContext.ExecuteQuery();
foreach (RoleAssignment orole in roles)
clientContext.Load(orole.Member);
clientContext.ExecuteQuery();
//name
//MessageBox.Show(orole.Member.LoginName);
lvi = new ListViewItem();
lvi.Text = orole.Member.LoginName;
lvsi = new ListViewItem.ListViewSubItem();
lvsi.Text = orole.Member.PrincipalType.ToString();
lvi.SubItems.Add(lvsi);
//get the type group or user
// MessageBox.Show(orole.Member.PrincipalType.ToString());
if (orole.Member.PrincipalType.ToString() == "SharePointGroup")
lvigroup = new ListViewItem();
lvigroup.Text = orole.Member.LoginName;
// args.GroupsList.Items.Add(lvigroup);
DoUpdate1(lvigroup);
Group group = clientContext.Web.SiteGroups.GetById(orole.Member.Id);
UserCollection collUser = group.Users;
clientContext.Load(collUser);
clientContext.ExecuteQuery();
foreach (User oUser in collUser)
lvigroup = new ListViewItem();
lvigroup.Text = "";
lvsigroup = new ListViewItem.ListViewSubItem();
lvsigroup.Text = oUser.LoginName;
lvigroup.SubItems.Add(lvsigroup);
//args.GroupsList.Items.Add(lvigroup);
DoUpdate1(lvigroup);
// MessageBox.Show(oUser.LoginName);
RoleDefinitionBindingCollection roleDefsbindings = null;
roleDefsbindings = orole.RoleDefinitionBindings;
clientContext.Load(roleDefsbindings);
clientContext.ExecuteQuery();
//permission level
lvsi = new ListViewItem.ListViewSubItem();
string permissionsstr = string.Empty;
for (int i = 0; i < roleDefsbindings.Count; i++)
if (i == roleDefsbindings.Count - 1)
permissionsstr = permissionsstr += roleDefsbindings[i].Name;
else
permissionsstr = permissionsstr += roleDefsbindings[i].Name + ", ";
lvsi.Text = permissionsstr;
lvi.SubItems.Add(lvsi);
// args.PermissionsList.Items.Add(lvi);
DoUpdate2(lvi);
catch (Exception ex)
MessageBox.Show(ex.Message);
finally
DoUpdate3();
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

I try to fill billing information but i could not (please call itunes support to complete this transction) what shoul i do

i try to fill billing information but i could not as there is a message (please call itunes support to complete trans action

If you have inaccurately filled out your billing application (or your credit card was declined), this can cause a red flag to popup that states "Please call iTunes suport to complete transaction". If you receive this error, iTunes support can be called by visiting https://expresslane.apple.com/ and completing the prompts within to speak with a customer service representative.
They will either be able to help you via IM support or submit a ticket to contact your landline or cellular.

How to solve Error SPSite - The Web application at address could not be found

Hello,
I am trying to find out the internal name of a custom SharePoint list columns, for this I have used following code snippet in my
console application but getting below error. The site I am accessing is a public SharePoint web site. This code is working
well with my local host site and i am able to get the internal names of any list columns but don't understand why this is failing with
public SharePoint site
For avoiding this issue I have done following steps:
1.Rebuild the application
2.changed the platform target as "Any CPU"
3.Visual studio and this public site is working in my admin account, but still I am getting the error!
I use visual studio 2010 and SharePoint 2010
please note the error I am getting
Error : The Web application at https://public.sp.a5-group.com/ could not be found. Verify that you have typed the URL correctly.
If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application
Code Snippet
static void Main(string[] args)
using (SPSite Site = new SPSite("https://public.sp.a5-group.com/"))
using (SPWeb web = Site.RootWeb)
SPList splst = web.Lists["ListCard"];
foreach (var field in splst.Fields)
bool isHidden = splst.Fields[field.ToString()].Hidden;
if (!isHidden)
string internalName = splst.Fields[field.ToString()].InternalName; //This will give you the internal column name.
Console.WriteLine(internalName);
Console.ReadLine();

I thin you need to have sharepoint installed on same computer and URL should be working on this computer.
If this URL WEB APP is in your IISsite try to create disableloopbackcheck registry which should be help
When you use the fully qualified domain name (FQDN) or a custom host header to browse a local Web site that is hosted on a computer that is running Microsoft Internet Information Services (IIS) 5.1 or a later version, you may receive an error
message
http://support.microsoft.com/kb/896861

Help - Could not load 'oracle.jdbc.driver.OracleDriver ...

I'm using oci8 to connect to the Oracle database.
URL: jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(PORT=1527)(HOST=testhost)))(CONNECT_DATA=(SID=fnoe2pa)))
When I tried to start the weblogic server, I got the following errors:
Can you suggest what I should do next (step-wise)??? Thanks, Bobby
<Sleeping in createResource()>
####<15/08/2002 14:09:43> <Error> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001060> <Cannot startup connection pool
"pool/test_myapp" weblogic.common.ResourceException:
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:212)
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:134)
     at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.java:705)
     at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:282)
     at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:650)
     at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:360)
     at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:285)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:239)
     at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:199)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:360)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
     at $Proxy31.updateDeployments(Unknown Source)
     at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:2977)
     at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:372)
     at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:160)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:360)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
     at $Proxy42.start(Unknown Source)
     at weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(ApplicationManagerMBean_CachingStub.java:480)
     at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
     at weblogic.management.Admin.finish(Admin.java:644)
     at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
     at weblogic.Server.main(Server.java:35)
>
####<15/08/2002 14:09:43> <Info> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001082> <Creating Data Source named
jdbc/test_myapp for pool pool/test_myapp>
####<15/08/2002 14:09:43> <Info> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001070> <Checking existence of connection pool
pool/test_myapp requested by user system>
####<15/08/2002 14:09:43> <Error> <JDBC> <qawebmethods> <myserver>
<main> <system> <> <001059> <Error during Data Source creation:
weblogic.common.ResourceException: DataSource(jdbc/test_myapp) can't
be created with non-existent Pool (connection or multi)
(pool/test_myapp)>
####<15/08/2002 14:09:50> <Info> <EJB> <qawebmethods> <myserver>
<main> <system> <> <010008> <EJB Deploying file: myapp-ejb.jar>
####<15/08/2002 14:09:50> <Warning> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160007> <You are running WebLogic Server with J2EE
1.3 features enabled. The implementation of specific J2EE 1.3 features
(EJB 2.0, JSP 1.2, Servlet 2.3, and J2EE Connector Architecture 1.0)
in BEA WebLogic Server 6.1 is of a non-final version of the
appropriate specification. It is subject to change in future releases
once the specification becomes finalized. This may cause application
code developed for BEA WebLogic Server 6.1 that uses the new features
of J2EE 1.3 to be incompatible with the J2EE 1.3 platform supported in
future releases of BEA WebLogic Server.>
####<15/08/2002 14:09:59> <Error> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160001> <Error deploying application myapp-ejb:
Unable to deploy EJB: Counter from myapp-ejb.jar:
The DataSource with the JNDI name: jdbc/test_myapp could not be
located. Please ensure that the DataSource has been deployed
successfully and that the JNDI name in your EJB Deployment descriptor
is correct.
>
####<15/08/2002 14:09:59> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101053> <[HTTP myserver] Loading web app: myapp>
####<15/08/2002 14:09:59> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101059> <[myserver] Loading myapp from WAR file:
C:\bea\wlserver6.1\.\config\mydomain\applications\.wlnotdelete\wlap31483\myapp.war>
####<15/08/2002 14:09:59> <Warning> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160007> <You are running WebLogic Server with J2EE
1.3 features enabled. The implementation of specific J2EE 1.3 features
(EJB 2.0, JSP 1.2, Servlet 2.3, and J2EE Connector Architecture 1.0)
in BEA WebLogic Server 6.1 is of a non-final version of the
appropriate specification. It is subject to change in future releases
once the specification becomes finalized. This may cause application
code developed for BEA WebLogic Server 6.1 that uses the new features
of J2EE 1.3 to be incompatible with the J2EE 1.3 platform supported in
future releases of BEA WebLogic Server.>
####<15/08/2002 14:09:59> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101031>
<[WebAppServletContext(1412030,myapp,/myapp)] extracting classfiles to
C:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\wlap31483\WEB-INF\_tmp_war_myapp:>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101032>
<[WebAppServletContext(1412030,myapp,/myapp)] extracted classfiles
successfully...>
####<15/08/2002 14:10:04> <Info> <HTTP Session> <qawebmethods>
<myserver> <main> <system> <> <100037> <Creating SessionContext of
type: memory for webapp: /myapp>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering classpath
servlet with initArgs 'null'>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering getior
servlet with initArgs 'null'>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering tunneling
servlets with initArgs 'wl-dispatch-policy=direct'>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101047>
<[WebAppServletContext(1412030,myapp,/myapp)] registering JSPServlet
with initArgs '[JspConfig:
verbose=true,packagePrefix=jsp_servlet,-compiler=javac,compileFlags=,workingDir=C:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\wlap31483\WEB-INF\_tmp_war_myapp,pageCheckSeconds=1,superclass=null,keepgenerated=false,precompileContinue=false,compilerSupportsEncoding=true,encoding=null,defaultfilename=index.jsp,compilerclass=null,noTryBlocks=false]'>
####<15/08/2002 14:10:04> <Debug> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101097> <Registering ServletContext:
"myapp:/myapp">
####<15/08/2002 14:10:04> <Info> <J2EE> <qawebmethods> <myserver>
<main> <system> <> <160003> <Deployed : myapp>
####<15/08/2002 14:10:04> <Info> <HTTP> <qawebmethods> <myserver>
<main> <system> <> <101133> <Initializing WEB server myserver>
####<15/08/2002 14:10:04> <Notice> <Management> <qawebmethods>
<myserver> <main> <system> <> <141052> <Application Poller started for
development server.>
####<15/08/2002 14:10:04> <Notice> <WebLogicServer> <qawebmethods>
<myserver> <ListenThread> <system> <> <000202> <ListenThread listening
on port 7001>
####<15/08/2002 14:10:04> <Info> <NT Performance Pack> <qawebmethods>
<myserver> <ListenThread> <system> <> <000000> <NATIVE: NTSocketMuxer
was built on Nov 1 2001 16:39:28
>
####<15/08/2002 14:10:04> <Notice> <WebLogicServer> <qawebmethods>
<myserver> <SSLListenThread> <system> <> <000202> <SSLListenThread
listening on port 7002>
####<15/08/2002 14:10:05> <Notice> <Management> <qawebmethods>
<myserver> <main> <system> <> <141030> <Starting discovery of Managed
Server... This feature is on by default, you may turn this off by
passing -Dweblogic.management.discover=false>
####<15/08/2002 14:10:05> <Notice> <WebLogicServer> <qawebmethods>
<myserver> <main> <system> <> <000331> <Started WebLogic Admin Server
"myserver" for domain "mydomain" running in Development Mode>
####<15/08/2002 14:10:11> <Info> <NT Performance Pack> <qawebmethods>
<myserver> <ExecuteThread: '14' for queue: 'default'> <> <> <000000>
<Allocating: '2' NT reader threads>
####<15/08/2002 14:10:13> <Info> <HTTP> <qawebmethods> <myserver>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <system>
<> <101047> <[WebAppServletContext(5367844,console,/console)] actions:
init>
####<15/08/2002 14:10:18> <Info> <HTTP> <qawebmethods> <myserver>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <system>
<> <101047> <[WebAppServletContext(5367844,console,/console)]
FileServlet: init>
####<15/08/2002 14:10:18> <Info> <HTTP> <qawebmethods> <myserver>
<ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'> <system>
<> <101047> <[WebAppServletContext(5367844,console,/console)]
FileServlet: Using standard I/O>

"thorick" <[email protected]> wrote in message news:<[email protected]>...
Most likely, the OCI libraries could not be loaded.
Before continuing down this path, is there any reason
why you want to use an OCI based Driver as opposed to the
all Java Oracle thin driver ?There is indeed a valid reason for my choice.
I am currently connecting to the Oracle "Rdb" 7.0 database (located on
VMS) - not Oracle Oracle.
The SQL Service software we're currently using is version 7.1. This
version works well with the OCI8 driver (when connecting to the
database from Windows NT). This version of SQL Service however does
NOT work for the THIN driver (unless we upgrade the SQL Service to
version 7.1.5.5 - which we're not prepared to do so because it is not
stable enough from our previous test/trials). SQLSRV Version 7.1.5.5
works for THIN driver but it will result in uncommitted
transactions/unresolved connection/stopping of listener issues and
there is a need to restart the service from time to time. Oracle has
since confirmed that this is a bug that they have yet to resolve...
So we have to stick to OCI8 (THICK) for the time being. I would really
appreciate it very much if you can tell me the various OCI libraries
that I need to load (in terms of WebLogic Server config file settings
etc..).
By the way I have already installed the Oracle 8 client software on
the NT server (where WebLogic Server is) and I have also set up the
relevant SID (using the Net8 Assistant) that points to the Oracle Rdb
database on the VMS. I have also tried using SQL*Plus to connect to
the database and I can connect properly to the database. But WebLogic
simply doesn't seem to load the software.
Help...
Regards,
Bobby Brown, writing from Australia.

Upon exiting LV7: Application Error-Memory could not be read.

Upon terminating my application, I get the following error:
"LavVIEW: LabVIEW.exe - Application Error
The instruction at referenced memory at . The memory could not be 'read'."
So far the error seems non-critical. It does not appear to affect the performance of the program in any way. However, it is certainly unnerving for my end users (not to mention me)!
The error occurs in both the executable and the debugging mode. I have traced it to the VERY END of my application, which runs flawlessly until the very moment when I use the Exit instruction. I have also tried using Close FP with Abort VI, as well as Close FP with Exit. All threads in my application have successful
ly terminated, so aborting does not stop any action in mid-execution, as far as I am aware.
Searching for others in the forum who have had similar problems has turned up little useful help. Could this be a bug in the (god forbid!) runtime engine?!
Here's a link to a discussion of the closest thing I could find to my problem.
Thanks for any help you can give. Any whatsoever.
-Nick
"You keep using that word. I do not think it means what you think it means." - Inigo Montoya

> Hmmm... I'll look into it. Many or all of the DLLs that I call were
> written in Delphi, which has at least three string types that come
> into play: regular Pascal String, PChar (Delphi's re-creation of the C
> string type), and the ShortString type, which is sized to 256 bytes
> (if memory serves). From your response, it sounds as if I should
> search for those DLLs that use the ShortString type.
>
> Also, I encode many complex data forms and pass them into the DLLs as
> array pointers. These also sound like places to start looking.
>
> Thanks for the input. If I ever track down the problem, I'll update
> this discussion for posterity. In the meantime, if anyone else out
> there has any more thoughts, I'd sure appreciate them.
To h
elp track it down, if you can build a debugging version of the
Delphi DLLs, especially something that will validate memory references.
One of the great tools for tracking down memory overwrites is a well
implemented debugging memory library. Also, if you have some notion of
DLL calls that write to the string and return it to LV, that would be
the first place to look. And in the end, the solution is usually to
look at the assumption of the DLL and send in a larger preallocated
string. So in some cases it is easiest to look for the strings and
arrays going into DLL node calls and one at a time give them large input
sizes looking for the closing crash to go away. Then when the symptom
goes away, look at the code for that DLL.
Greg McKaskle

When Firefox loads I get an error saying 'the applications security component could not initiallize'. I have a 64-bit PC based system.

When I load Firefox I get an error message that tells me that the application security component could nt be initiallized. The suggestion from the error meddage was to see if there is a read/write restriction for the application profile directory. I have looked and found no such restriction on that directory. Firefox will load and allow me to look on the web, but many of the functions do not work. I have a 64-bit system using Windows 7 (64-bit version).

Rename secmod.db (secmod.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the file.
You may have to rename cert8.db (cert8.db.old) as well.
Firefox will create new files.
The file cert8.db stores user certificates and intermediate certificates send by websites, so if you have certificates that you want to keep then you may want to export them now and import them after having removed cert8.db.
See Tools > Options > Advanced > Encryption: Certificates: View Certificates
If that works then you can delete the renamed files or undo the changes if you want to revert the process.
Also make sure that you allow the loopback connection with the Software Security Device in the firewall.<br />
* [[Firefox makes unrequested connections]]

Application message help could not be called Message in SABAPDOCU888

Similar Messages

Maybe you are looking for