Application minimized when launching from the JavaWebstart desktop icon

Hi All,
I created a desktop icon when I was prompted to thru JavaWebStart.
Now, whenever I launch my application by double-clicking on the icon, it launches with the window minimized.
I have to d-click on the windows taskbar to maximize it.
Is there a way to launch the application with the maximized window.
Maybe some property to be set in the JNLP file.
Please let me know if anyone knows about it
Thanks
Urvashi

O sure...I can do that if i am launching the application on a single monitor. And this does work if i have only 1 monitor. But in case of multi-monitors, this does not work.
Thats why I was looking for more like property to be set.
Urvashi

Similar Messages

Design Studio 1.4 SDK: Issues when launching from the Eclipse IDE

Hi,
I am receiving various errors when launching Design Studio 1.4 from the Eclipse IDE for SDK development. All of the components appear in the Component panel as expected but I can't drag and drop any of the SDK components (or standard components for that matter) onto the canvas. When I launch Design Studio 1.4 independently of Eclipse everything works fine (event though I still see come errors in the Console).
I'm hoping the community can provide some guidance to help resolve the issue. The details are documented below:
Environment:
Design Studio Version: Release 1.4 SP0 Patch 1 (64-bit)
Eclipse Version: Java EE IDE Luna Service Release 1a (4.4.1) - 64-bit
Java Run-time Environment: Version 8 Update 25 (64-bit)
Operating System: Windows 7 64-bit
Eclipse Configuration for DS SDK:
Target Location:
Target Environment:
Target Run Configuration (Main):
Target Run Configuration (VM Arguments as per DS SDK Developer Guide):
Steps to Reproduce Error
1. Launch Eclipse
2. Launch DS 1.4 from Run command in Eclipse
The following screen appears immediately after launching DS from Eclipse:
At this point the DS error log is as per the attached DS_Log_After_Eclipse_Launch.txt file.
3. Create a new blank Application from the Application -> New menu. This time additional error messages appear as shown in the screenshot below:
It's not possible to drop any standard or SDK components onto the canvas because the internal browser doesn't appear to have been instantiated due to the above errors.
At this point the DS error log is as per the attached DS_Log_After_Eclipse_LaunchAndAppCreate.txt file.
3. Return to Eclipse IDE
The Eclipse Console displays the following errors:
The Eclipse Console Log is as per the attached EclipseConsoleLog.txt file.
4. Launch DS 1.4 Independently
The following errors also appear when I launch DS 1.4 independently of Eclipse but it in this case everything seems to work fine.
Any assistance would be greatly appreciated.
Thanks,
Mustafa.

Hi there,
From My Experience you batter use older version of Eclipse - Helios:
Eclipse IDE for Java EE Developers | Packages
developers/heliossr2
Good Lack

When I click the MFF desktop icon Firefox takes exactly 30 seconds to load, is that right?

''Duplicate post, continue here -'' [/questions/752057]
I have just installed Firefox and it takes 30s from clicking the desktop icon to loading the home page. Tabs only take about 2s, is this right?
IE loads in 2-3 s.

The answers you have got above are correct.
However, if your FF otherwise feels snappy when browsing - and a second restart (aka. warm start) of FF is much faster than the first - then you could try my suggestions here: https://support.mozilla.com/en-US/questions/762446#answer-119951
The slow load time on a cold start is an old "classic" problem for FF.
Mozilla may work on a solution or not, but meanwhile I'm happy with this work around.

ESS Leave Request error when launched from the portal

Hi guys
When i try to launch the Leave request from ESS tab in portal i am getting the following error
I have checked the backend and i can process a leave request from there. It is failing on the portal side.
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Index: 0, Size: 0
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
     at java.util.ArrayList.RangeCheck(ArrayList.java:507)
     at java.util.ArrayList.get(ArrayList.java:324)
     at com.sap.aii.proxy.framework.core.JcoBaseList.get(JcoBaseList.java:268)
     at com.sap.aii.proxy.framework.core.AbstractList.get(AbstractList.java:230)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCList.get(DynamicRFCList.java:281)
     at com.sap.tc.webdynpro.progmodel.context.Node$ModelElementList.getElement(Node.java:2549)
     at com.sap.tc.webdynpro.progmodel.context.Node.getElementAtInternal(Node.java:621)
     at com.sap.tc.webdynpro.progmodel.context.Node.setLeadSelection(Node.java:753)
     at com.sap.xss.hr.lea.form.FcForm.setLeadSelectionForSubtype(FcForm.java:700)
     at com.sap.xss.hr.lea.form.FcForm.setVisibility(FcForm.java:943)
     at com.sap.xss.hr.lea.form.FcForm.prepareCommand(FcForm.java:308)
     at com.sap.xss.hr.lea.form.wdp.InternalFcForm.prepareCommand(InternalFcForm.java:2041)
     at com.sap.xss.hr.lea.form.FcFormInterface.prepareCommand(FcFormInterface.java:116)
     at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface.prepareCommand(InternalFcFormInterface.java:1887)
     at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface$External.prepareCommand(InternalFcFormInterface.java:1983)
     at com.sap.xss.hr.lea.form.edit.VcFormEdit.onInit(VcFormEdit.java:299)
     at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEdit.onInit(InternalVcFormEdit.java:1084)
     at com.sap.xss.hr.lea.form.edit.VcFormEditInterface.onInit(VcFormEditInterface.java:165)
     at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface.onInit(InternalVcFormEditInterface.java:204)
     at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface$External.onInit(InternalVcFormEditInterface.java:280)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)

This error occurs due to the following customisaton, Please
check this :
Check the Feature WEBMO is activated or not?
Is the pernr assigned correctly?
Please can you check if the Pernr used
has correct information like It0105 etc, also the rules are
correctly defined.
For the Employee, First of all check the Period Work Schedule also
the Quotas of the pernr needs to maintained in 2006, Please do
this customisation and it should solve the issue.
Maintain the absence quota in the IT2006 and then try once.
Also make sure that the Settings in Webmo and PTARQ etc all is done
The pernr belongs to the a Rule and have absences defined for him.

How To Set Third Party Media App Is Default When Launched From Default File Manager

I use rock media player, which can encode & decode The Video and audio files i use, unlike the phone i have, i don't receive the option to set the app as the default media player. I would really like to be able to use this app on the thrive as it is some much a better media player than the thrives defaulty app. Rock player is the name of the app, who do set it as the default player when launched from the default file manager.

From my experience playing with the Thrive, when you attempt to watch a media file, it will open a menu asking you what application to use. From that popup, you can set a default.
- Peter

Powershell unzip with shell.application not working when launched from windows service

I have a deployment agent on a machine implemented as a windows service. Service is 32-bit and runs on windows server 2008R2 x64 SP1 with powershell V2. Powershell script requires elevation and to run under x64 because of dependency to powershell module
'IIS Administration'. To achieve this, the service starts a cmd file which in turn launches powershell x64 console:
C:\WINDOWS\sysnative\WindowsPowerShell\v1.0\powershell.exe "Start-Process C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell -ArgumentList '-ExecutionPolicy Bypass -NoLogo -NonInteractive -NoProfile -File C:\Temp\EndJobCmd\Install.ps1' -Verb RunAs"
This seems to work well. The problem I have is that the script has a sequence where it unpacks a zip file to a destination folder using shell.application, this works fine when triggered manually on the server or through the task scheduler, but when triggered
from the service it does not extract any files at all (cannot see any errors thrown by the script but it seems to continue to execute as it logs a successful message to the event log after finishing).
Unzip sequence looks like:
$shell = New-Object -com shell.application
$pkg = $shell.namespace($sourceFile)
$installDir = $shell.namespace($targetDir)
$installDir.Copyhere($pkg.items(), 20)
Any advice greatly appreciated. I have searched some and seen a few people with similar issue but have yet to find a solution.

If it's still actual, I managed to fix this with having CopyHere params equal 1564.
So in my case extract zip function looks like:
function Expand-ZIPFile{
param(
$file, $destination
$shell = new-object -com shell.application
$zip = $shell.NameSpace($file)
foreach($item in $zip.items())
$shell.Namespace($destination).copyhere($item,1564)
"$($item.path) extracted"
1564 description can be found here - http://msdn.microsoft.com/en-us/library/windows/desktop/bb787866(v=vs.85).aspx:
(4) Do not display a progress dialog box.
(8) Give the file being operated on a new name in a move, copy, or rename operation if a file with the target name already exists.
(16) Respond with "Yes to All" for any dialog box that is displayed.
(512) Do not confirm the creation of a new directory if the operation requires one to be created.
(1024) Do not display a user interface if an error occurs.

[SOLVED] GTK2 apps have wrong theme when launched from desktop entry.

So I'm setting up KDE and I want to use the QtCurve theme for all applications where possible. I have set (via kde-gtk-config) the GTK2 theme to QtCurve and it half works. GTK2 applications are using the QtCurve theme when they are launched via a command, but they are using what appears to be an ugly version of the Oxygen theme when launched from a .desktop file. I previously installed gtk-qt-engine from the AUR, but have since removed it along with it's files, and as I was using the Oxygen theme at the time, this appears to be what has caused the issue. Does anyone know what is causing this and how to fix it?
EDIT: Solved by removing ~/.themes folder (obviously only remove the KDE-QT theme if there are other themes in the folder).
Last edited by RibShark (2013-09-23 17:26:41)

Thanks, but lxappearance made things rather worse.
A friend of mine had told me to put "gtk-toolbar-style=GTK_TOOLBAR_ICONS" into settings.ini and my problem is solved now.

When you say applications can be downloaded from the Creative Cloud...

Does this mean that you can download as many times as you like and to different Macs/PCs... just that I am travelling for a few months and am trying to avoid taking my MacBook but need to work along the way. Or can you run the applications such as InDesign from the Creative Cloud? Thanks

charleyhall wrote:
Thats great and can you download to both pc and mac?
Yes.
http://www.adobe.com/au/products/creativecloud/faq.html
"On how many computers may I install the software I download from Creative Cloud?
You can install the desktop applications available in Creative Cloud on up to two computers. You will have access to both the Mac OS and Windows version of these applications, so if you have a Mac at home and a PC at work, for instance, you can install your applications on both. See the product license agreements page for more information."

"Firefox" is an application which was downloaded from the Internet - Open?

Everytime I go to open up programs (for example, firefox) I get a dialog box like this:
“Firefox” is an application which was downloaded from the Internet. Are you sure you want to open it?
Underneath it says "AppFresh downloaded this file on May 3, 2009". These programs are installed via an administrator, but I don't want to have to click yes every time on my standard account. What can I do?

Peter:
I don't want to have to click yes every time on my standard account.
As noted in earlier posts, you should get that message the first time you launch firefox or any other downloaded application. If you get the message each time, for some reason the computer thinks it is the first time you are launching the application. Are you sure that the application is installed in the application folder? Or are you launching from the .dmg each time? If you are,
double click on the .dmg file.
When it opens drag the icon to the Applications folder and it will be permanently installed. You will need to authenticate to install, but you should not have to authenticate each time you launch the application.
Drag any icon that you have in the Dock to the Desktop
Then launch the application.
If you want to keep it on the dock click and hold on the icon
Select Keep in Dock in the pop-up menu.
cornelius

Some of the application components are missing from the Application directory, Please reinstall the

Some of the application components are missing from the Application directory, Please reinstall the application. This is what i am getting tying to open Photoshop Cs6???

Renée in the future when removing Photoshop CC please utilize the uninstaller located in the Applications/Utilities/Adobe Installers folder. Please run the uninstaller and then reinstall. If you continue to face difficulty reinstalling Photoshop CC then please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

Using fonts when launching from JNLP

Hello,
I followed the directions in this link http://fxexperience.com/2010/05/how-to-embed-fonts/ and was able to add and use fonts in my javafx program when launched from Netbeans. But when I try to launch from JNLP, the fonts do not show up (the text shows up as Arial).
Is there something special I need to do to access the fonts in the jar and utilize them?
As the link directed I created a fonts folder in my src folder where I store all the .ttf file, and created a fonts.mf file in META-INF where I map a name to the font file. Works fine when launching from netbeans.
thanks in advance for your help
jose

I've found the problem! It's the timestamp for the JNLP file. But unfortunately I can't figure out the workaround as yet.
To explain the problem it would be best to start with my application's installation procedure:
The applcation is installed by way of CD (using javaws -import) as downloading an 8mb jar file over dialup is unwieldy. Subsequent updates are retrieved from the server. Jardiffs are sent back to the webstart client so updates over dialup becomes manageble.
The application jar file in the CD is version 1.0. Let's say the server is now at version 1.3 with the timestamp 2005-10-01 00:00:00.
The user installs the application using the CD today which gives his JNLP file the timestamp of 2005-10-03 00:00:00.
When the application is started, it calls the server to check for updates. Although the JNLP file returned from the server specifically states that the current version is at version 1.3 Java Web Start insists on using the timestamp to perform the comparison first.
Since the timestamp of the JNLP file in the user's pc is dated later than the JNLP file in the server, Java Web Start ignores the version checking and assumes that the application in the server is the latest and greatest.
Has anyone encountered a similiar situation? The only solution I can think of is to hack the JNLPDownloadServlet to return a date that's way in the future so that Java Web Start picks up the changes... sigh.
Is it possible to disable the timestamp checking for the JNLP files? As again, help is mucho appreciated and there are 10 duke dollars at stake too :)

Developer Server 6.0 hanging when launched from Netscape 4.6

Hi, simple question to ask about OAS and Developer Server.
My Developer Server 6.0 hanging when launched from Netscape 4.61,
I am currently running...
Pentium PII 200Mz running NT sp5
Forms Server version 6.0.5.31.0 (Patch 3 applied)
OAS version 4.0.7.1.0 (Patch applied)
Jinitiator 1.1.7.18
Netscape 4.61 browser
I have all the latest versions of everything that is available,
I have followed the instructions.
I successfully connect to the OAS admin utility and have setup
all the virtual to physical directory mappings under the default
listener www. I successfully start all website OAS services.
I have Forms server successfully started up as a process
listening on port 9000.
I have two statics html files created:
a) with Jinititator 1.1.7.18
The very first time I connected to this static html file it
installed Jinitiator as expected. The Forms server splashscreen
then appears.
Jinitiator then starts up successfully, no errors appear in the
Java console. This has proved I am talking to the listener and
my virtual directory mappings are working.
At this point there is a lot of disk activity and then all
stops, the splashscreen remains and appears in the discussion
area:
FRM-9999 cannot access "koala.ilaco.gov.bo:9000" and
a series of java exceptions
I am pointing to the correct java directories (I think)
b) with out Jinitiator
When I try to call using URL with Netscape 4.61 I get a
message on the status bar saying...
Applet oracle.forms.engine.Main class oracle/forms/engine/Main
got a security violation: Method verification error
Can you help ?
If you know the answer, please let me know as soon as
posible.
Thanks for the answer....
Rgds,
Polo
null

Bart LEBOEUF (guest) wrote:
: Hi,
: I've the same problem during this week. I've resolve the
: problem by replace DLL's
: in %ORACLE_HOME%\bin by the ifwcm60.dll from Developer CD-Rom
: (\extras\sp4\ifwcm60.dll) and vgs60.dll
(\extras\vgs\vgs60.dll).
: At first time, it doesn't work. I remove my environnement
: variables
: FORMS60_MAPPING and FORMS60_TIMEOUT from my System Control in
the
: Config panel, then I reboot and surprise, it works !!!
: (Look also in database registry of Windows with regedit
utility
: in
: [HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE] and remove the two
: variables if you found them.)
: I try on my two servers and it worked now perfectly.
: : Bart.
I respond your email, with my actual server configuration my
problem is now: I get the splash screen and after form is hanged.
My server configuration is:
Compaq PC, with Pentium II, the software is:
- Windows NT, with Service Pack 5
- Oracle Application Server, v.4.0.7.1.0 Enterprice Edition,
pathset 1
- Developer Server v.6 patchset 3
- My browser in this machine is Netscape 4.61
- Jinitiator 1.1.7.18 is also used.
My developer server is installed and running on the same machine
that OAS is. I am using other browser in other machine (IE5)
and trying to connect to the OAS on the first machine.
My problems begin when I launch ifsrv60.exe. I copied
ifwcm60.dll v.6.0.5.0.2, and other files required in the %
ORACLE_HOME%\bin
I forced listener Developer Server Port (
c:\orant\bin\ifsrv60.exe -listen port=9000 )
Now, I can connect with this process, with the following line:
telnet koala 9000. The listener is working now.
I tried to work with my (NonCartride-static html)forms60 form on
WEB without Jinitiator, but I couldn't.
With Netscape, in the status bar: Applet
oracle.forms.engine.Main can3t stop ERROR
With IE5, I get the splash screen and after the forms is hanged.
If I use Jinitiator:
With Netscape, in the status bar: Oracle Jinitiato: applet
oracle.forms.engine.Main inited then form is hanged.
With IE5, I get the splash screen and after that, the screen
freezes and looks like the form is hanged.
Any further suggestions on this?
Polo
null

"Firefox.app" is an application which was downloaded from the Internet...

This is a topic that has been posted before but I'm creating a new one because the previous discussion is closed and none of the answers solved my problem.
Each and every time I launch Firefox, I receive the following warning, - “Firefox.app” is an application which was downloaded from the Internet. Are you sure you want to open it?"
For the record, I have tried the following fixes with no success:
- Removed the Firefox folder from user/library/application support both as a user and as an admin.
- I logged in to the Mac as an admin. and launched Firefox. The message continues to pop up after doing this, while still logged in as admin.
- I logged in to the Mac as an admin, went to Terminal and listed the attributes. The "com.apple.quarantine" attribute does exist, however, when I tried removing it with (xattr -d com.apple.quarantine <FILE NAME>), I am told that the attribute DOESN'T exist. Huh?
I am trying to avoid completely removing Firefox and doing a fresh install but it may come down to this. Any help would be greatly appreciated.
Thanks!

I had a similar problem with another application. I downloaded an update to an application from the developer, and then got this message every time I ran the program. There's a script to disable this behavior entirely on MacWorld's macosxhints site.
I didn't want to disable this behavior for good, just for this one program. I realized that I had downloaded it as one user, but the first use (of the update) was as a different user. I logged in under the user ID that I used when I downloaded the application and ran the program. After that, the warning went away.
My guess is that you did something similar. Log in as the user ID you used when you first downloaded the updated FireFox and run the program. The warning should go away.
If you can't remember which user ID you used, try the brute force approach - log in as each of your user IDs and run FireFox.
Good luck!

PS CS4 64-bit (in Web Premium CS4) on Win 7 PC. I did a duplicate file check on my hdd and deleted dup files. Now I get "Some of the application components are missing from the Application directory, Please reinstall.."

PS CS4 64-bit (in Web Premium CS4) on Win 7 PC. I did a duplicate file check on my hdd and deleted dup files. Now when I try to run PS 64-bit I get "Some of the application components are missing from the Application directory, Please reinstall the application." When I do this, it seems to install correctly until the very end, then it says "Installation Complete With Errors", and when I try to run I get the same 'component missing message'. What can I do? PS 32 bit runs fine. Some of the other applications ib Web Premium say the shortcut has been changed or removed. I appreciate your help...Thank you

Best advice I can think of is to uninstall and run the Clean Script from here.
Adobe - Adobe CS4 Clean Script

DNG files will not open in photoshop when launched from lightroom

This just started, I can't open DNG files in photoshop when launching from within lightroom. Not sure how to fix this. the dng files launch fine from bridge.

As for your issue with DNGs in CS, did you bother to update ACR to version 2.4?
See the detailed instructions on the download page.
>What I need to know is whether or not my PS CS will work with files converted by Adobe DNG.
Of course ACR will, if you correctly install Adobe Camera Raw 2.4.
No version of Photoshop opens raw or DNG files, only ACR does, hosted by Photoshop. But you do need at least version 2.4 of ACR, which was the first to support DNGs.

Application minimized when launching from the JavaWebstart desktop icon

Similar Messages

Maybe you are looking for