Application monitor node display off

Hi All,
I am using SRM 4.0. Strangely I am running into lot of troubles in SRM since yesterday as there was a mess up in the batch jobs.
Now, we are having an issue with Application monitor. It is not showing any error message in ITS, but I could see some error messages in RZ20. In ITS, when I click on "Display all" under purcashe order or confirmations in application monitor, it used to show the errors or it will say no error. But now it is showing GUI - RZ20 screen with a message "Node Display off".
I have tried by restarting the Application monitor, but it didn;t help.
Could you please help me to fix this?
Thanks,
Arun

Hi,
Please refer to the following SAP OSS notes ->
Note 135503 CCMS monitor arch: meaning of profile parameters
Note 781100 CCMS: Too many nodes/too little memory during KMC monitoring
Note 623164 CCMS: Error if alert/MONI_SEGM_SIZE=0
Note 731165 RZ20: CCMS parameters for segment control
Note 110368 FAQ - CCMS MONITORING INFRASTRUCTURE
Note 509524 RZ20: Methods do not start
Note 382769 RZ20: Error messages do not generate any Alerts
Note 705569 BPMon: Important Msg's in Activation and Generation Protocol
Note 807072 DataSources for ABAP and distributed statistics data
Note 746193 RZ20: Generating all-clears ("green alerts")
Note 783725 EP6.0 CM & Collaboration SP2 Patch 27
Note 441768 - Displaying canceled shopping carts in monitor 3.0 and 3.5
Note 395699 - Display shopping baskets with status 7 in the Monitor

Similar Messages

CCMS Monitor(RZ20) - Node display off

Hello,
I am unable to see the list of XI component from CCMS.
Whe I am accessing Runtime Workbench-->Component Monitoring, I can see the list of Component i.e. IR, ID, IE,SLD etc.
But when I see the same in Transaction RZ20, there is a node for Exchange Infrastructure, with 'node display off' information given just above the nodes.
Is there some way that we need to activate the node before we can see the details of XI.
Thanks
Vijaya

Hi Julia,
Thank You for the Reply.
Actually I was tring to do the same thing what was written in SAP Note as the same procedure is given in SAP Help.
but when I try to create a entry from RZ21
Technical Infrastructure>Configure Central system>Create entry for remote system.
It gives an error saying 'NAJ is a local system ID'. I am trying to activate CCMS in my WAS client which is my Integration server. Is that a problem?
Thanks
Vijaya

Node display off , Central data cache configured but not active

Hi
We get an error "Node display off , Central data cache configured but not active" in Central system while trying to display the monitored the abap instance of system.We just completed the CCMS configuration.
we are getting this error in RZ20 (central system)
Agent regristration is complete in monitored system and it is running fine.connection from central to monitored (abap instance) system is also ok.Please help asap.
Operating System --AIX
Sap version--ECC 6
Database-db2
Regards
Shashi

Hi,
central data cache to improve the performance of the Alert Monitor when creating the alert monitoring trees.
Check [This link|http://help.sap.com/saphelp_sm32/helpdata/en/de/13622d770b5e4f8398fc536b690e93/content.htm]
And [This link|http://help.sap.com/saphelp_sm32/helpdata/en/10/75ea3b6d73e807e10000000a11402f/content.htm]
Hope this solves your problem.
Feel free to revert back.
--Ragu

Node display off , Central data cache configured but not active while tryi

Hi
We get an error "Node display off , Central data cache configured but not active" in Central system while trying to display the monitored the abap instance of system.We just completed the CCMS configuration.
Agent regristration is complete in monitored system and it is running fine.connection from central to monitored (abap instance) system is also ok.Please help asap.
Operating System --AIX
Sap version--ECC 6
Database-db2
Regards
Chamba Shashi
Edited by: SHASHI SAMAL on Apr 28, 2009 6:25 AM

Hi,
central data cache to improve the performance of the Alert Monitor when creating the alert monitoring trees.
Check [This link|http://help.sap.com/saphelp_sm32/helpdata/en/de/13622d770b5e4f8398fc536b690e93/content.htm]
And [This link|http://help.sap.com/saphelp_sm32/helpdata/en/10/75ea3b6d73e807e10000000a11402f/content.htm]
Hope this solves your problem.
Feel free to revert back.
--Ragu

Applications are been displayed off screen

I'm using applications and some of them are been displayed off my screen, allowing me to see only part of the application.

Hi bw1960-
Greetings and welcome to the Apple boards
Try booting from your OSX installation disk and use Disk Utility to repair permissions on the drive.
This may be helpful: About Disk Utility's Repair Disk Permissions feature
Luck-
-DaddyPaycheck

HT5019 MacPro laptop display and 2 external monitors (three displays). Can I have more than one application displayed at a time?

I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
I am using the HDMI and the mini HDMI connectors.

I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
I am using the HDMI and the mini HDMI connectors.

IMac always auto detects for external monitors after waking from sleep or from display off

I've got a Dell 24" monitor (2408WFP) plugged into my mid 2011 iMac via DVI cord and thunderbolt attachment. Things work fine.
When I need to leave my computer, I usually turn the displays off using the shortcut keys: CTRL + SHIFT + EJECT
This works perfectly and both displays go black. However, when I return to my computer and reactivate the iMac, the iMac display will turn blue as if I have just plugged in a new monitor even the external monitor is still plugged in. It usually flashes blue twice before displaying the password prompt. I can usually just log back in as normal. I've never had this happen before using Snow Leopard. It's annoying but strange.
However, even more strange is that sometimes when returning to the desktop, the iMac will do the auto detect display thing and then when I log back in, the external display just shows static as if there is no signal. I've checked the cable a million times and everything is as tight as tight can be and both ends are plugged in properly. Unplugging the displayport adapter from the iMac and then reattaching it restores the desktop on the secondary display although sometimes, it results in the secondary display showing a gray background picture instead of my normal picture. Replugging the secondary display seems to fix that too although sometimes it doesn't.
Why is this happening?
- Problem with the adapter?
- Problem with the DVI cable I'm using?
- Compatibility issues with my external monitor?
I need to stress the point that this has never happened before with Snow Leopard.
If I am the only one experiencing this then I suppose it may be an issue with the iMac or adapter or even the cable. But if anyone else can shed light on this problem, I'd really appreciate it.

Hi Micheal,
I've been experiencing the exact same issue with my new iMac I just bought. I bought it refurb so I wasn't sure if it was a defect with the hardware or not. Since I'm not the only one I will asume it's not for now.
Setup:
- iMac 27-inch 3.4GHz (Release May 2011)
- Dell 2709W external monitor
- Hooked in with mini display port to DVI adapter
- Lion 10.7.3 all up to date to this day
From what I've been able to gather the issue presents itself only when my Dell 2709W enters "Power Save Mode" after I do CTRL + SHIFT + EJECT or when the diplays simply goes to sleep by themselves.
Although if I hit that combination and the displays goes to sleep but I don't wait long enough for my Dell monitor to actually "Power Save Mode" (wait like 2 sec) then touch the keyboard then the 2 displays (iMac and Dell) resumes from sleep without the issue presenting itself.
I'm tempted to buy the mini-display port to HDMI just to see if the issue is still present with that adapter. If I do I'll update my post with the outcome.
If anyone else has any info to help with this issue it would be greatly appreciated. It's very annoying when you resume from sleep and you find all of your windows that where opened on the external display before sleep squeezed into your main display (iMac).
Thanks!

T400, External monitor displayed off center.

So I have a Lenovo T400 with the ATI/onboard switchable graphics. When I plug it into my external monitor with the onboard graphics enabled, it displays correctly. When I have it connected with the ati graphics enabled, it displays off center and cuts off the right 1/5 of the screen. If I have my external display at a lower resolution, it works like it's supposed to.
1680x1050
1440x900
I've already tried reinstalling the drivers and adjusting the screen position with the monitor... any other ideas?
BTW this is on Windows 7. Laptop code is 2764-CTO

I hate to bump this, but I'd love some help.
Thanks

Error in Application Monitor

Hello,
I am facing a weird problem.
I see an error in application monitor with no description. It only has the date and time.
When I try deleting this error, I get a message "Error deleting alert"
Now in RZ20, I see that there is an error under Purchase Order.
"Backend application errors PurchOrder 4100001842: Transfer failed"
When I try to open this and try to complete it, I do not see any item under the screen "Alert Display". So I am unable to complete this from RZ20.
We are aware of the fact that we did have an error witht his PO. There was some config error which was rectified and moved to production after which the PO made it successfully to ECC.
But the error remained in the application monitor and is now haunting the monitoring team who are forced to check every time to see if this is the old or a new one.
Any idea on how I can get this off the app monitor?
Thank you.
Manish

Hello Muthu,
I have checked this already. We do not have any error in BBP_PD for this PO. This has got replicated to ECC with no errors.
Not sure why this is still seen in app monitor.
Any FM/Table from where I could delete this log entry. Just kidding..
Pls advise.
Thank you.
Manish

Backup of monitor node 1.1.4

Hi all,
I'm fairly happy with backups and restoration on the admin node, but not done much with the monitor node.
I think a while ago, I backed up a monitor node and restored it, and seemed to go ok, apart from the gap in logs while you're actually doing the backup/restore.
What I want to know and have not seen any documentation on it, is there a decent way of opening and viewing backed up logs. i.e. accessing the massive raw encrypted file that will be saved off to some network drive somewhere?
I'll give it a try on Monday but not got access to any at the moment.
Sent from Cisco Technical Support iPhone App

Hi,
For scheduled backups, you can obtain information about the backup, backup events, and status (when the backup was performed, whether it was successful or not, and so on) from the Backup History page.
Every Cisco ISE administrator account is assigned one or more administrative roles. To perform the operations described in the following procedure, you must have one of the following roles assigned. Super Admin or Monitoring Admin or Helpdesk Admin.
To view the backup history, complete the following steps:
Step 1 Choose Operations > Reports > System.
Step 2 From the System navigation pane on the left, choose Data Management > Administration Node > Backup History.
The Backup History page provides basic information about the scheduled backups that were run.
For failed backups, you must run the backup-logs command from the Cisco ISE CLI and look at the
ADE.log for more information.
Note The backup history is stored along with the Cisco ADE operating system configuration data. After an application upgrade, backup history is not lost and the Backup History page lists all the backups that were run. The backup history will be removed only when you reimage the primary administration node.

Can I run two external displays off a MacBook?

Hi there.
I would like to run two external 20" Acer (VGA) displays off of my MacBook. I already use one 20" in addition to my MacBook screen but would like to have two full sized screens to work off and would not need the 13" from the MacBook.
The MacBook literature says that only a second monitor is supported but I was hoping there is a way to override the MacBook screen in a two monitor setup and port the display to the third monitor.
Any ideas ??

You can have two independent external displays on the workstation macs such as G4, G5 and Mac Pros but not on apple laptops to the best of my knowledge. If you look on that page it shows the Mac Pro then underneath it is the image of two montiors side by side with the shark image going across it. Lower down is a Macbook Pro with one additional monitor next to it.
This is the text which accompanies the image:
"With an all PCI Express architecture, Mac Pro supports a lineup of state-of-the-art graphics cards to ensure a spectacular visual experience. Every Mac Pro supports two displays — including one 30-inch Apple Cinema HD Display — and can be expanded to drive an array of up to eight displays."
Im assuming the up to eight displays refers to the fact that you can add extra graphics cards to the Mac Pro.

Import dialog box displaying off screen

When I'm in the office, I work in a dual-monitor environment.
However, when working at home, I have only my laptop monitor.
If I need to import something - html file, template file,
etc. - the dialog box is displaying off screen.
I've shut down and restarted, but still the same result. When
I try to resize the RH window, it resizes off screen.
My display properties indicate only one monitor.
How to fix?
Thanks!
Cindy

Hi Cindy
Sounds like you need some multiple monitor managing software.
Try these:
MultiMon (Free)
click here
UltraMon (Paid)
click here
Other than that, you can try flying blind and navigating
using the keyboard or maybe bump your resolution to the highest
possible setting and perhaps that will bring the dialog either
partially or totally into view.
Cheers... Rick

My HP 2010i monitor is displaying a power buttom lockout message

my HP 2010i monitor is displaying a power buttom lockout message and goes black once in a while. It also turns off

To disable 'power button lockout' hold the power button about 30 sec.
If the monitor turns off then it's maybe more a pc problem?
Does it shows 'no signal'?
*** Say 'Thanks' with Kudos ***

OS/DB migration : Distribution Monitor nodes

Hi All,
We are in the process of migrating our ECC 6.0 environmnet from Solaris + DB2 to AIX +DB2.
We are using Linix Application server as our Distribution Monitor nodes. In this run we did not get the result as per our expectation. Could please share your experinece or recomendation to use third OS (in our case Linux) for Distribution Monitor Node. Is there any recomendation or best practice for Distribution Monitor nodes -- whether we should use same OS as Source system or Traget OS or we can use any Application Server ( OS).
Regards,
Dipam Phukan

Best Approach migrate your ecc 6.0 from solarisDB2 to AIXDB2
if you use migmon or Distubution method its take time . For DB2 migration we can go backup/restore method.
If you are system running on DB2 . you can move any unix to any unix with out using migtaion tools . you can use only backup restore mehtod.
You can use redirected restore to create a Heterogeneous system copy between 2 systems running on different platforms.
sapnote:628156
document:
A:http://www.ibm.com/developerworks/data/library/techarticle/0308nesiem/0308nesiem.html
B:http://publib.boulder.ibm.com/infocenter/db2luw/v9r5/index.jsp?topic=/com.ibm.db2.luw.admin.ha.doc/doc/c0005960.html
Compare to orace , DB2 lot of benefits . if same case required to move with oracle mean you need to migration but DB2 you can backup restore method.
Procedure:
1. use Redirect resore mehtod
2. source system preparation .
run redirect restoer script in source sytem
3. Target system preparation
install fresh system and resore the database from backup using redirect restore
With Regards
Ram
solution Architect for Migrations,upgrades, SAP HAHA

My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??

My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??

Lol, figured out the first part. Just for those who may be searching, when you click on the Display Preferences, and click on the arraingment tab... it not only shows where your two screens will be displayed, but the WHITE BAR at the top of one screen is the dock/toolbar. Click and hold to grab this and just slide it over to the screen you'd like it to be on.
You have to release it IN the screen box, not on top of it... and it should pop right over to the new (or old) screen. At any rate, you can put the dock on either (or any) screen that you prefer.
I am thinking of ordering more of these. Lol. 3 monitor setup seems like it would be crazy good.
Still looking for the answer to keeping the new 16" screen on the right without switching between screen #s with that... not expose... Lion feature.
Thanks. Hope my other question has an answer out here.
Paul H

Application monitor node display off

Similar Messages

Maybe you are looking for