Application Not Appearing in Mobile Handheld Device

Hi Experts,
I am using a windows mobile hand held device. I am using Netweaver mobile 7.1.I have uploaded the SDA file using SDOE_UPLAOD_ARCHIVE. After this, I have created a logical device in the middle ware.I have added my application in the MCD.
In my physical device, i Have installed CreMe , ESWT file ,MIn DB and run time. In my mobile client i have created user ,and maintained the sync settings properly .
I have synchronized the device with the middle ware,I find that the outbound queue of the device which had data gets cleared,But i do not find my application in the application launcher in my physical device.
I have checked the middle ware,There I could see this status of the application as Installation Pending" ( While synchronization) i notice messages in the device " Installing mobile components".
I tried uninstalling and installing the mobile client several times but cannot fins the application.
Can anybody help me on this?
Thanks
Nishad

Hi,
As pointed out by Alan, the user authorizations would not havebeen assigned to the device. You need to assign the authorizations to view the application in the client.
If the authorizations are already present, then there might be some issue with installation. Check the MI\inbox folder &
Apps folder if the applications are present. In any case you can raise a ticket with SAP support.
Regards,
Nipun
Edited by: Nipun Dev on Jan 10, 2011 7:21 AM

Similar Messages

Deployed mobile application not appearing in Mobile component

Hi Experts
I have downloaded the standard MAM (MAMLAPTOP3006_0-20001490.ZIP SAP MOBILE ASSET MANAGEMENT 3.0 SR 06 (Laptop) patch level - 0)
From this I have a standard .war file which I am deploying in NWT server (10.191.97.208)
I am successfully able to deploy the application in MI admin
But the deployed application is not visible in the list of mobile components
However this component is clearly visible in sysinfo.
Kindly suggest what can be done to resolve the issue.
Thanks in anticipation of your valuable suggestions.
Warm Regards
Saquib

Hi Saquib,
Yo have an autorization problems. The possible reasons are:
1- The client have not downloaded the user information from the DOE.
2- You have not triggered a doe load for the SAP BASIS Component
3 - The user have not the required roles on the Mobile Server
Please read this FAQ: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0f8ef00-5a40-2c10-b8a1-f260176d37b4
With this paper I'm sure tha you'll solve the problem.
Regards,
David Faustini

Developing Java application for windows CE based Handheld device

Hi everybody,
I am planning to develop the java application for windows CE
based handheld device.I came to know that Oracle 9iLite supports
the Developement of Java Application for windows CE devices.Can
i use the JDeveloper IDE to develop the application on windows
NT.If so how to deploy the application on windows CE device(Is
there any options in Jdeveloper to deploy the application).Any
body please give the solution.
Regards,
Siva mani kumar.D

I agree. In my opinion Sun has done a horrible job documenting all this madness for the average developer just starting out with this stuff. There is the CLDC, J2ME, Personal Java, J2ME-WTK, MIDP, MIDP-FCS ... maddness. Anyway after sorting through it all for a few days, I think the answer to your question you will need to use Personal Java for WinCE and the Sharp Zaurus, and MIDP for PalmOS for the palm. Jeode seems to be the most common and best Personal Java implementation and it is basically the JDK1.2.2 (or is it 1.1.8) that is designed to run on WinCE and Embeddix (such as Lineo on the Zaurus). You program it just like you would a 1.1.8 application and then you can test it by running pjava.exe which is included in the personal java 3.1 download from Sun. There is also a program called JavaCheck that will ensure that your app will run properly in PersonalJava. As for the Palm, MIDP for PalmOS is a 574K program that installs on your palm device. You then use the J2ME-WTK (wireless toolkit) to build a JAR/JAD file and you use the MIDP API to write the code.

Re: Can not Assocate User with Handheld device

Same thing, have you find a solution ?
Thanks in advance
rgds
Hub
> It does not show up in ConsoleOne. Under the HH Object.
>
>
> "Anand Sinha" <[email protected]> wrote in message
> news:M_MSc.923$[email protected]..
> > You mentioned in the other newgrp that the option is grayed out. Where
> > exactly is it grayed out?
> >
> > Regards
> > Anand Sinha
> >
> > "Joe Tietz" <[email protected]> wrote in message
> > news:n5PRc.19$[email protected]..
> > > Can not Assocate User with Handheld device
> > >
> > > ZFH 6.5
> > >
> > >
> >
> >
>
>

bart3321,
First I have separated your request/inquiry because it was added to a message that was over 2 years old. Seems you went to a "shop", and got blocked from assessing needed files. You did not state the error message. Was it permissions? Can you right click on the excel file, change the "Share with" ?
http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/How-to-change-read-only-to-read-write/td-p/2...
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

SVG image does not appear in mobile version but does in desktop version

Hi,
I am new to using Muse and have created only one site before in Muse. I have taken screenshots to show the problem I am having.
I have used Illustrator to create the following logo image that I save out as an SVG file:
As you've probably guessed, I have used clipping mask to insert the marbly purple image into the shapes and text (this may be relevant to the problem, I don't know).
I then save it out as an SVG with the following details as advised by Adobe:
Then moving into Muse, I File > Place the SVG file. 'Unable to generate thumbnail' comes up in both desktop and phone versions:
Regardless, I uploaded to FTP post to my website. While the SVG appears perfectly on my desktop browser, it does not show at all on my phone browser:
This is not only happening on my phone, I have visited the same website on multiple phone devices and still the SVG image does not appear. Any ideas why this is happening?
Have I totally missed something about file formats for mobile browser versions in Muse?
Also- in illustrator, I saved the SVG logo for the mobile version as a SMALLER SVG than the one I saved for the desktop version.
Thanks

Use a PNG file. I see nothing in your logo that would warrant using anything else. You're not scaling it, there is no interaction and all you are doing is masking out some data that is pixels already. Pardon me, but using an SVG makes no sense at all. Beyond that one would need to see the file, but my guess would be that the "responsive" setting once again embeds some garbage data. Wouldn't be the first time...
Mylenium

Deployed Application Not appearing in Task Pane

I have deployed an application, have mapped all the required Roles to Participants...post successfull deployment, when i am loggin into BPM workspace,Application doesnt appear.However Application Roles are all getting displayed into Admin Console of BPM.

Hi Durgadas
1. You mean to say, on left side you do not see a link for your application to initiate a task. Am I right ? If so, first check if you have some Users added to that first Initiator Role. If you deployed your app one time from JDev at that time only all the participants you add for that role will be stored in the db. Any later redeployments with more participants will not be reflected. This is part of design of bpm itself. So from BPM Workspace, login as admin. From Adminstrator link, add the users to that Role and see if that helps. If you added particpants in the JDeveloper IDE itself, they may not be reflected, even though you see them listed in admin console. So better delete existing participants or add some new participants and see if that works.
2. I hope the first user task, that submits the task has actions like Submit and it should be Initiator type user task. When you edit the user task and add a human task, at that time, select from drop down as Initiator with only one Action like Submit.
3. Restarting the server helps sometimes. But this may not be the root cause for your issue. Everytime you add a new participant to initiator role, we cannot expect to restart the soa servers. Add a new user from bpm admin console and thats all we need.
Thanks
Ravi Jegga

Developed application not appearing in system

Hi,
Developed and deployed an application throgh NWDI ,but its not appeared in the respective portal system.
Note: able to see the application in CBS(NWDI)
what are all to be crossverified.
Thanks a ton

what's the application?
if you are deploying your application from nwdi, you can check the deployment log

Application not appearing in Application set

Hi Team,
I am trying to execute legal consolidation using particular application set but my legal application alone not appearing initailly when I caopy from other Appset it got appeared.
I checked in connection summary following message it is displaying
Internal OLAP server = SAP-CPMVM
    Internal Web server = SAP-CPMVM
    Internal Report server = SAP-CPMVM
    External OLAP server = SAP-CPMVM
    External Web server = SAP-CPMVM
    External Report server = SAP-CPMVM
    BPU OLAP server =
    BPU Web server =
    External BPU Web server =
     FINANCE - Financial Application
     LRATE - Legal Rate App
     OWNERSHIP - Legal Ownership
     RATE - Currency Rates
In the above my legal application "LegalApp" is missing under External BPU webserver.
How to resolve above issue.

Hi Naveen,
It will be most probably because of Security not defined for this new application in the "Member Access profile". Please check.
Thanks & Regards
Arun Kumar S

IPhone does not appear in list of devices in iTunes in the cloud

my iPhone does not appear in the list of devices

Hi, cdv2007.
Here are some helpful troubleshooting steps I would recommend going through when your device is not recognized on a Mac.
Note: This article is for Mac OS X users. If you're using a Windows PC, please refer to these troubleshooting suggestions.
Follow these steps to resolve your issue:
Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
Install software updates on your Mac.
Note: If an iTunes update is available, apply the update.
Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
Disconnect other USB devices and connect your device directly to a USB port on your Mac.
Restart your Mac.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
If you are experiencing the issue on Mac OS X 10.6, try the steps in the article below.
Mac OS X v10.6: iOS device not recognized in iTunes after restart
http://support.apple.com/kb/TS3540
Cheers,
Jason H.

Why does my IPod not appear in Compter or Device Manager or ITunes using Windows 7?

My 5th generation IPod does not appear on ITunes. Likewise, it does not appear in my OS Windows 7 in the folder: Computer nor does it appear in the window: Device Manager. Is this because Windows 7 does not recognize the IPod? I've had my new computer (1TB, Win. 7, etc) for several months which replaced an older computer with OS Win. XP. The IPod worked fine on XP and I suspect Win. 7 is the issue here? Correct? Windows 7 doesn't recognize several devices and feel like it's planned obsolescence! What is the alternative here if it's Win 7? I have no plans/interest to buy a new IPod, btw!

Hello Gary,
I would be concerned too if my iPod was no longer recognized by iTunes. I found an article with steps to assist with getting iTunes to recognize your iPod on a Windows computer:
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

HT201250 I disconnected My Passport by mistake, and now Time Machine can not find it. Although connected, it does not appear in the My Devices section of Finder. What do I do?

I disconnected My Passport by mistake, and now Time Machine can not recognise it. It no longer appears in the My Devices section of Finder. What do I do?

Hello rjhc49,
Thank you for the details of the issue you are experiencing with your external hard drive. I found an article with steps you can take when an external device is not being recognized.
I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151
Thank you for using Apple Support Communities.
Best,
Sheila M.

IPhone 5 not connecting to mobile wifi device

For some reason, this morning my iPhone 5 has stopped connecting to my mobile wifi device, giving me the message 'incorrect wifi password'. It is definitely the correct password as I verified it by connecting my iPad 2. I've re-booted, power cycled both the phone and wifi device and reset all network settings to no avail. Can anyone help?

thanks, that worked for my iphone 5... I considered doing just that, but couldn't figure how that would make a difference when my ipad was connecting and my phone was recognizing it, but just couldn't join it. Thanks again for taking the time to share such a simple fix!

Applications Not Appearing in Workspace (9.3.1)

Hello all,
We recently upgraded to system 9.3.1 and intermittently users are not seeing the applications when logging into Workspace.
Example: USER A logs in to Workspace, is able to perform all necessary duties by logging on to the application for days, sometimes weeks at a time. Suddenly, USER A logs in, and Workspace appears as if there are no applications registered at all. The next day USER A logs in and everything is back to normal.
Can anybody give me a clue as to where to look to find the source of this?
I have a sneaking suspicion it is because the applications were not properly de-registered from the previous version (System 9.3.0.1) which had completely different server names as the current system 9.3.1.
If that is the case, those references would be located in the tables in the main HFM database, but what, or should i even, modify/delete those references?
Thanks for any help,
Kelly

The error is only occurring on our HSS/Core Services box.
One of the log files for BIPLUS on the HSS box grows to 4GB, cuts off then starts creating another one of itself and does this AT LEAST once a day!
here is a sampling of the error we are getting on the 'server_messages_usageservice' log file:
<event logger="com.brio.one.services.mgmt.usage.impl.UsageServiceImpl" timestamp="1210988764908" level="ALWAYS" thread="Foundation Server" sequence_no="390">
<time>16 May 2008 20:46:04,908</time>
<context originator_type="UsageService" originator_name="UT1_srvhouhfm09.###.com" host="SRVHOUHFM09"/>
<message><![CDATA[Starting Usage Service
]]></message>
</event>
<event logger="com.brio.one.services.mgmt.usage.impl.UsageServiceImpl" timestamp="1210988770426" level="WARN" thread="GCThread0" sequence_no="427">
<time>16 May 2008 20:46:10,426</time>
<context originator_type="UsageService" host="SRVHOUHFM09"/>
<message><![CDATA[1000165]]></message>
</event>
<event logger="com.brio.one.services.mgmt.usage.impl.GCThread" timestamp="1210988770426" level="WARN" thread="GCThread0" sequence_no="428">
<time>16 May 2008 20:46:10,426</time>
<context originator_type="UsageService" host="SRVHOUHFM09"/>
<message><![CDATA[1000165]]></message>
<throwable><![CDATA[May 16 20:46:10.426
Database Server error: DBConnectionPool::get: [Hyperion][SQLServer JDBC Driver]An error occurred while attempting to log onto the database.
com.sqribe.transformer.DBConnectionException: Database Server error: DBConnectionPool::get: [Hyperion][SQLServer JDBC Driver]An error occurred while attempting to log onto the database.
     at com.sqribe.transformer.DBConnectionPool.get(Unknown Source)
     at com.brio.one.services.impl.database.BaseDBManager.getUpdateableConnection(Unknown Source)
     at com.brio.one.services.mgmt.usage.impl.database.UsageServiceDBManager.deleteEvents(Unknown Source)
     at com.brio.one.services.mgmt.usage.impl.database.UsageServiceDBManager.deleteMessages(Unknown Source)
     at com.brio.one.services.mgmt.usage.impl.GCThread.execute(Unknown Source)
     at com.brio.one.services.mgmt.usage.impl.GCThread.run(Unknown Source)
[1000165]:
DBConnectionPool::get: [Hyperion][SQLServer JDBC Driver]An error occurred while attempting to log onto the database.
So in one of the log errors, it lists the user that is trying to connect. It is the SS admin I created during the installation, 'hypadmin'. This user of course does not have access to the BIPLUS db, which would cause these errors.
So I tried something, created a SQL user of the same name with the same password. Restarted services, and everything seemed to work fine, except this time when I tried to launch SS, it said a severe error had occurred, and to restart SS.
I restarted, same error. the horror consumes me...
so i went back into SQL, looked at the processes and lo and behold hypadmin was using one measely connection. I killed the process, killed the user ID in SQL, restarted all of my services and everything was golden again except, of course, the monstrosity that is the usageservice log file and the constant hangs while in the user management console.
does any of this ring a bell? how would a native directory user be configured to access the db???

Application not appearing

Hi Experts,
I having created a custom wedbynpro application using FPM, but when I created the Application of the webdynpro component the applciation is not seen.
However, when I go to the Package and under the hierarchy 'Webdynpro applications' I am able to view the application.
BR,
Aarvi.

This is alright. i assume that You have created a application based on a FPM_OIF_component of GAF component. That is the reason it is appearing under the application node.
When you create a application based on you component then your expectation is correct.

Apple TV does not appear as a listed "Device" in iTunes

I just purchased Apple TV. It is working okay. I have two Macs synced with my Apple TV. One shows a "Device" in iTunes but the other does not. On the second computer, once Apple TV is loaded the device icon goes away. I am unable to access the necessary tabs to sync my photos to Apple TV. I have tried removing Apple TV and rediscovering it but it did not change anything. What am I doing wrong?

Welcome to the Apple Discussion Forums.
This is not unfortunately the same issue as the OP (original poster) described. In any case we would need further info about your set up, types of connections, router set up, network set up, how far you get in the set up process, that sort of thing. Your post will attract more interest if it is in a thread of it's own, so perhaps you could start a new thread with the information I suggested.
Also just to clear up the original matter: Things have now moved on since this thread started and an update has enabled photo streaming. The situation is now this:
Your main (Primary) itunes (the one with which you sync) will (should) always have the tv in the device list.
Your secondary itunes(s) (the ones which stream only) will (should) only show the tv in its device list if the library is selected as a source on the tv.

Application Not Appearing in Mobile Handheld Device

Similar Messages

Maybe you are looking for