"Application not available" for every application ...

I'm hoping this is an easy one...
I have a Lumia 710 with the latest software. I reinstalled the OS on my laptop, and reinstalled Zune. I connected my Lumia and change the sync partnership type from Guest and everything looked OK.
Since then, when I connect to the App Marketplace and irrespective of what application I select, I get the message "Application not available. This might be because your phone software needs to be updated..." message.
Any ideas on how to fix this?
Thanks a lot for your help,
Iain

If you go to Microsoft store on your PC and you sign in with your Microsoft account you should be able to select apps and install them to the phone without the need of Zune. If this works and you can also install apps directly on your phone I'd contact Microsoft Store Support for further assistance.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Similar Messages

  • Error importing new version of our app "Application not available for edit"

    Hi,
    We are trying to import an app and get the error: Application not available for edit
    thats it on a clean white background - Application not available for edit shows up at the top left corner of the screen.
    Any clues?
    We tried a new id, tried a custom id.
    Then we tried deleting the existing app so we could insert the new app.
    We can't delete either.
    Help!

    I'm going to hijack this thread and ask a follow up question to Scott (or whoever reads this).
    When we export our application out of DEV it gets exported as Run + Build. When I have the DBA import into test or production on the Import screen I have them set it to Run Only and Reuse the Application ID. After installing it just forwards you to the same white screen with the "Application not available for edit" message on it. Now I understand the actual message since its Run Only, but its not clear that the import actually worked correctly or not.
    So although it does seem to import correctly, they always get nervous when they see this that it didnt import correctly. So is it better to have them import as Run + Build and then go change the build status through the admin front end rather than the way I'm doing it now?

  • The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it.  After looking in the app store it does not appear that said application is available for re-downloading.

    The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it.  After looking in the app store it does not appear that said application is available for re-downloading. Is there a special, non-app store place where I am to go for this?
    Also, I installed MacKeeper about two-three months ago and am questioning its performance. Looking for input as to whether or not this application helps or hinders my system.

    I'll back up Csound on the MacKeeper thing.  In fact, I actually wrote the following about it:
    http://www.reedcorner.net/news.php/?p=245
    Remove is ASAP.  Do not use the provided uninstalled, as there are widespread reports of pop-ups advertising MacKeeper on your system after incompletely removing it.  Try this:
    http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
    As for VirusScan, Barney is right on the money that it does not come preinstalled on any Mac shipped new from Apple.  However you have gotten it, your best bet is removing it.  See my Mac Malware Guide for more information that will help you understand and avoid Mac malware without relying on anti-virus software.
    http://www.reedcorner.net/guides/macvirus
    (Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

  • Data entered by ITS application partly not available at BSP application

    Environment:
    We have an old ITS application to enter absences and presences to SAP HR.
    And we have a new BSP application to delete absences and presences.
    Both applications are available for the employee in an employee self service, that has an navigation developed with BSP.
    Problem:
    All data entered with the ITS application, could not be deleted in the BSP application, if the user does not log off. Or until he deletes one dataset, that he did not entered after the current login. If he deleted one old dataset, all new datasets can also be deleted.
    The ITS application stores the data with the function HR_MAINTAIN_MASTERDATA.
    The BSP application deletes the data also with the HR_MAINTAIN_MASTERDATA function.
    But its strange, that I can read the newly entered data with select from the Database or the function HR_READ_INFOTYPE. But when the users selects this dataset, the BSP class currently read, the HR_MAINTAIN_MASTERDATA cant delete, because of the message "no data in timeperiod". Even the function 'BAPI_ABSENCE_GETDETAIL' reads the data.
    Seems to be some kind of buffer problem. Reading the data is possible, but trying to modify/delete does not work.
    Also this did not help:
    *using more commit works.
    *Try to initialize buffers with the functions "HR_INITIALIZE_BUFFER", 'HR_PSBUFFER_INITIALIZE', "HRPAD00_FREE_PLOG_TAB" or "HR_PSA_CLEAR_BUFFER"
    Trying to delete the absences with the function 'BAPI_ABSENCE_DELETE' instead of the HR_MAINTAIN_MASTERDATA function (without DESTINATION and with DESTINATION 'NONE').
    Does anybody has an idea, why my BSP application works fine with all datasets, entered before the current login, but can not delete datasets I newly entered (but I can read them, I only cant delete them!). And what is more strange: after I delete on old dataset, then I can delete also the new datasets!

    Is your provisioning profile for Development or Ad-Hoc distribution?
    Also, it would help if you posted a screenshot of you target settings as well as your Info.plist file.

  • The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator.

    Hi,
    I'm not able to access the term store. I get an below mentioned error.
    "The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator. "
    Since this is happening on my local machine (Dev environment). I have full control on the term store and the all the site collections.
    Hence, this is not a permission issue.
    I have checked, the Metadata service is active on the machine. All the application pools in IIS is running.
    After reading one of the recommendation on internet, I created a new Managed Metadata Service.
    After which I was able access both (old and new) MMS from Central Admin only (highlight the MMS from manage service applications and click Manage ) and not from the site collection (term store management).
    Now again its not working after I did an IISRESET.
    The managed metadata service (Managed Metadata Service Connection) is grayed out.
    ULS Error says:
    Failed to create ManageLink for service proxy 'Managed Metadata Service'. Exception: System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout
    value on the Binding. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/7a91ec90b46843e995c144be48d804f0/MetadataWebService.svc' has exceeded the allotted
    timeout of 00:00:09.9990000. The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out 
    Please let me know if you need more information.

    Hi Victoria,
    Thanks for your reply
    I tried making all the changes you had recommended and which are mentioned in the link you have provided.
    I tried making all possible combination of changes to the web.config and client.config files but it does not make any difference to the environment.
    One thing is that, my error in ULS logs has changed.
    Error 1: 
    Exception returned from back end service. System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted
    to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000. The time
    allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out 
        at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context) 
        at System.Net.HttpWebRequest.GetRequestStream() 
        at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()     --- End of inner exception stack trace --- 
        at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() 
        at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout) 
        at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)     --- End of inner exception stack trace ---    Server stack trace:  
        at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)     at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) 
        at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) 
        at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:  
        at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) 
        at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) 
        at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
    Error 2:
    Error encountered in background cache check System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time
    allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000.
    The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out 
        at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context) 
        at System.Net.HttpWebRequest.GetRequestStream() 
        at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()     --- End of inner exception stack trace --- 
        at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() 
        at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout) 
        at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)     --- End of inner exception stack trace ---    Server stack trace:  
        at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)     at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) 
        at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) 
        at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:  
        at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) 
        at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) 
        at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b() 
        at Microsoft.Office.Server.Security.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2a() 
        at Microsoft.Office.Server.Utilities.MonitoredScopeWrapper.RunWithMonitoredScope(Action code) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.RunOnChannel(CodeToRun codeToRun, Double operationTimeoutFactor) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.ReadApplicationSettings(Guid rawPartitionId) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.get_ServiceApplicationSettings() 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.TimeToCheckForUpdates() 
        at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.CheckForChanges() 
        at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.<LoopForChanges>b__0().

  • User defined Applications not available

    Dear gurus,
    I'm new to BPC for MS, and my problem is that I have created new applications (copy of existing ones and some modifications) within a new set of applications.
    When I try to select one of this new applications on BPC for Excel, they are not available for me, after I select my set of applications.
    Do I need to do something after create this applications? I just followed SAP configuration guide "Business Planning and Consolidation - Administration", and the result was applications not available.
    Could you help me?
    Best regards,
    Vitor Ramalho

    Hi,
    Go to Member access profile under security.Here you will see your newly created Application.Selection this application and assign
    it to users and groups.Now go to connection wizard.In drop down box for Application you will be able to see your application.Login using this application.
    Hope it will work.
    Regards,
    Prakash

  • Created application not available...

    Hi to all,
    I've installed SAP BPC,..I've followed to the post installation steps, and the only things weird is that I don't see the newly application that I've created in the list of the available applications when accessing through Microsoft Office (I see Finance, Legal, ecc...but not mine).
    Any idea why?
    Thanks
    Daniele

    Hi,
    This happens when the member access profile is not maintained for an application. You can go to Admin and open your member access profile. You will find tabs for each of the application. You can refer to the existing applications and do the same for the newly created application. Then go to excel, click on connection wizard and login.
    Hope this helps.

  • Applications not available

    I am searching for several apps via my phone app world but the search result does not display them.Yet when i search via a PC on App world (not via the phone) the apps are there?
    I then send the link to my phone to try and install the apps but get the message "application not available on your device or for your carrier". The phone is less than 1week old. surely the app search should bring up all apps on App world and where the app states available for for all devices and all carriers it should work?
    my carrier says it's not the phone and it's because its new - can someone clarify this as correct or should i just request a new phone?
    early replies appreciated
    Thanks
    Steve. 

    Well here are a few options.
    Torch has 360 x 480, 9700 has 480 x 360 pixels, 8900 has 480 x 360 pixels, 9000 has 480 x 320 pixels.
    I wouldnt recommend an iPhone (I deal with them all day) unless you jailbreak it.
    1). Please thank those who help you by clicking the beside the 'Reply' button.
    2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
    3). Remember to have fun! We are all in this together!
    4). Follow me on

  • This User Profile Application's connection is currently not available. The Application pool or user profile service may not have been started

    Hi, we had installed SharePoint Service Pack 1 (SP1). And now the user profile service application is not available. Getting this
    Error "This User Profile Application’s connection is currently not available. The Application pool or user profile service may not have been started".
    How to troubleshoot the issue anh help/thoughts will be appreciated

    Not sure, if this will help, but in my case all of my services were up and running (including app pools) and also IISRESET did not help. So at that point, looking at the error message, I assumed that there is something wrong with the app pool (or app pool
    credentials) and went to CA --> Application Management --> Manage Service Applications and selected UPSA and under properties just created a new app pool to run under farm account (did not want to take any chances).
    As soon as the new app pool was provisioned, the service came back.
    Thanks, Ransher Singh, MCP, MCTS | Click Vote As Helpful if you think that post is helpful in responding your question click Mark As Answer, if you think that this is your answer for your question.

  • What are the reporting tools available for Java applications??

    hi..
    please tell me some reporting tools available for java applications.... if there are some, please mention how to find their documentation????

    http://jasperreports.sourceforge.net is a nice one, there is also a link to a graphical design tool.

  • "Application not available" page

    We have a need to display an "application not available" page when a person navigates to the site outside the normal hours of operations.
    One way to do this is to have the index.html route to a JSF page which checks the time, then either redirects to the application, or if outside of operating hours displays the "not available" message.
    Is there a way that this can be solved with the faces-config.xml file? I would like to move this logic out of the page.
    thanks
    d1

    Two options came up:
    - servlet filter
    - a rule in the apache web server

  • Debugger not working for BSP application

    Hi All,
    I have 4.6C sap installation and the debugger is not working for BSP Application even when i hard code the break points.
    Can anyone help me on this issue.
    Thanks and Regards
    Shilpa

    Hi Shilpa,
    How many number of sessions are open ? If there are already six sessions open and then you try and get the debugger, it will not start, and you won't be able to catch that error also...!
    Other than that there is no possibility that the debugger doesn't start, unless ofcourse, the logic doesn't reach the debugger point....
    Hope this helps.
    <b><i>Do reward each useful answer..!</i></b>
    Thanks,
    Tatvagna.

  • BDT-DC is not prepared for this application object

    Hi,
    I am getting this the error message:
    BDT-DC is not prepared for this application object
    when I try to create an extension.
    I cam across the following thread:
    EEWB
    In this thread it is given:
    Hi,
    The xdcflag in the table TBZ1 needs to be set.
    Please follow the steps mentioned below.
    1. Start the transaction SM30.
    2. Enter the name of the Table/View as V_TBZ1_DC.
    3. Press the 'Maintain' button.
    4. Double click on the Application Object you are trying to extend(for
    e.g., BUPA)
    5. Mark the checkbox 'Active in DC' under the section 'BDT DC Settings'.
    6. Save the data.
    You can refer to note 955236.
    When i follow the above steps it says that:
    Do not make any changes (SAP entry).
    Please Guide.
    Regards
    Shilpi

    Hi Smita,
    I am unable to start the wizard.When i choose Start Wizard I get this error message and the wizard is not started.
    Regards
    Shilpi

  • I have a multifunctional Canon i-SENSYS MF4140 and Mac Book Air Mac OS X 10.7.3 Lion (11D50b). I have a problem because I can not scan, it is not driver for this application?

    I have a multifunctional Canon i-SENSYS MF4140 and Mac Book Air Mac OS X10.7.3 Lion (11D50b). I have a problem because I can not scan, it is not driver for this application?

    I see printer drivers from Canon for that printer for OS X 10.7. but not scanner drivers. If the MF4140 is not recognized by the Image Capture application and Canon technical support cannot offer any assistance, all I can think of to suggest is to try a third-party scan application such as VueScan:
    http://www.hamrick.com/vuescan/vuescan.htm
    They offer a free trial period so you can see if it works with your Canon.
    Regards.

  • Two menu entries for every application in Gnome-Shell?!

    I have two menu entries for every application, which is kind of annoying, because the menu needs more time to load at startup!

    bugs, bugs , bugs!!!!
    I got rid of that preoblem by going back to fallback mode, booting one time and then going back
    to shell menu! Hope it works for you people as well!!
    edit: no seems only to work sometimes, the icons change arbitrarily each time you reboot!
    Last edited by gunjah292 (2011-05-06 07:08:16)

Maybe you are looking for