Application not for iPhone?

So here is my issue. Yesterday I started getting the "this application isn't supported for the iPhone, turn on airplane mode?" message constantly. I deleted all of my apps and still got the message. I restored my phone and am still getting the message. Does anyone have any ideas why? I don't have any apps installed.

Set the phone aside in a cool, dry place and let it dry for about 5 - 7 days. Do not attempt to use it and do not charge it. You can put it in a baggie with raw rice and shorten the drying period by a couple of days, just be sure to clean out any rice debris afterwards.
After it dries give it a full charge and try it again. If you get the same message you will need to do an out-of-warranty replacement of your phone, in the US the cost is $199.

Similar Messages

  • I have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

    i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

    You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

  • Air application (not for mobile) ?

    Hi
    How do we proceed to create a Air application (not for mobile) that works with Zend Server? "Flex and Php project" creates a web based application, isn't it?
    Thanks

    I have the same question.
    Is possible to debug the PHP side of an AIR application?
    Because for Web and Mobile applications there is an extra option for debugging ("Web (PHP) Application" and "Mobile (PHP) Application") but there isn't any option like that in Desktop Application.
    If is not possible with Flash Builder, does somebody know a workaround for debugging PHP in AIR apps?

  • How can I recover my data in notes for iPhone 4s thats without iTune backup

    How can I recover my data in notes for iPhone 4s thats without iTune backup.

    Sorry saker, but if you have not backed up your data anywhere, and you told the computer, in essence to clear the data and restore it with your iPod data, then you are pretty much out of luck....
    Cheers,
    GB

  • Scrolling a list in application published for iPhone

    I am creating an application in Flash CS5 which will be published for iPhone. I need to scroll a list of entries, just like we have a list of songs in iPhone. I am not able to get how to make the scrolling of the list possible. I tried using TouchEvent class but it is not firing any method in Device Central.

    FWIW - mouse events work on iPhone/iPad exactly like they do for a normal Flash app. So you'dprobably want to test for a CLICK or MOUSE_DOWN instead of a touch event...

  • HT203167 I downloaded diamond twister full version but cannot see icon on IPAD2, when I go to install page, it is mentioned installed. This application was for Iphone

    I downloaded Diamond Twister full version on IPAD2 but cannot locate icon on my iPad, the application was actually for IPhone. Previously lite version was ok.

    You've checked all your homescreens and app folders for it, and how many homescreens do you have on the iPad - there is a limit of 11 after which apps are only accessible via the iPad's spotlight search screen (swipe your first home screen to the right).
    If not then have you tried a reset to see if you can find it after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. You could also do Settings > General > Reset > Reset Home Screen Layout which will re-arrange your apps and might make it easier to find

  • When are we having LTE in Colombia, we allready have the network, but not for iPhone

    We allready have the 4G LTE network working here in Colombia, but not with iPhone

    As per this, you are indeed still out of luck until one of your 3 carriers deploys the appropriate signalling gear. This may provide more info.

  • I am creating application icons for iphone

    I am creating icons for an iphone/ipad application developer and the application icons are loaded into the application the tranparent areas are turning black. Is there a way to fix this?

    Don't attempt to use transparent application icons.
    Application Icons
    Ensure that your icon is eligible for the visual enhancements iOS provides. You should provide an image that:
    Has 90° corners (it’s important to avoid cropping the corners of your icon—iOS does that for you when it applies the corner-rounding mask)
    Does not include a drop shadow
    Does not have any shine or gloss (unless you’ve chosen to prevent the addition of the reflective shine)
    Does not use alpha transparency

  • App updated and syncing fine with ipad; updated from PC, but not for iphone. Updated on PC, but not on iphone

    Product: iPhone 5
    itune: 11.2.2.3; ios 7.1.1
    iPhone 5 app updated fine from PC, but will not sync with iPhone.
    Steps: Fire iTunes from PC, then connect iPhone, did app updates in iTunes, but did not sync with iPhone (the # updates stays the same next to "APP Store").
    It worked fine for iPad App updates. I tried connect, disconnect, did not work. I also read some posted comments, but still cannot resolve the problem. Please help. Thanks!

    Hello there, graced.
    The following link from the iPhone Basics provides another way to update an app on your iOS device:
    App Store - Learn more  about iOS 7 and iPhone - Apple Support
    http://support.apple.com/kb/index?page=tidetail&product=iphone&locale=en_US&tag= App%20Store#TI133
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Usb block for pen drives/ usb storage but not for iphone, ipad & itouch

    is there any way to block USB ports for pen drives/ usb storage so that we can confirm that no data is being leaked ?
    can we allow only iphone, itouch or ipad to connect from USB ports ?
    Message was edited by: maxnix2004

    [DenyThumbDrives|http://homepage.mac.com/gweston/dtd/index.html] may or may not work for you.
    JGG

  • Set WAIT_CURSOR for whole application, not for single frame

    Hello,
    I am trying to set the cursor to an hour glass while a process runs. The application uses serveral frames that are open at the same time. The problem I have is that the cursor is attached to the frame (frame.setCursor) so once I move off the frame to another one the curosr is no longer an hour glass and when I move backover the first frame the cursor does not change back to the hour glass.
    Is there any way to set the hour glass for the whole application?
    Cheers
    Andreas

    hi,
    write a new class for this: class CursorHandler
      private static Vector frames = new Vector ();
      public static void addFrame (JFrame f)
        frames.add (f);
      public static void setCursor (Cursor s)
        for (int i = 0; i < frames.size (); i++)
          JFrame f = (JFrame) frames.get (i);
          f.SetCursor (s);
    }then just do:CursorHandler.addFrame (this); //for all frames
    CursorHandler.setCursor (new Cursor (Cursor.WAIT_CURSOR)); //in any framegreetings,
    Stijn

  • 3gs Random "accessory not for Iphone turn on airplane mode"

    Out of no place last night my 32 gig 3gs started to have this message. It will not stop doing it. In fact it is doing it almost every 5 to ten minutes. I have restored using the itunes restore. I have restored as a new phone. I have restored even using my computer at work. Is this known problem? And is there a fix other than me driving almost 3 hours to the nearest genuis bar?
    Thanks In Advance.

    Unfortunately, this sounds like moisture or direct water damage around the 30 PIN connector...that message is triggered by certain accessories being plugged into the 30 PIN that output specific resistances on a certain PIN to show an accessory not made for 3G or 3Gs...
    Check the water damage indicator under the 30 PIN...you will need a light to view and it's a very tight fit...if you see red under there you have moisture or direct water damage and the Apple store is not going to help you...
    If it's still completely white and the other water indicator in the headphone jack is also completely white...I'd certainly take it to an Apple store for a replacement...

  • ITunes 11.2.1 freezes when I connect my iPhone 5. 'Application not responding'

    Hi,
    Recently I upgraded Mavericks. Since then I cant sync my phone anymore. iTunes works fine untill I plugin my phone. Then the spinwheel comes up and stays there forever. In dock it says 'Application Not Responding'.
    iPhone 5, iTunes 11.2.1, Macbook Pro 10.9.3 2.6 GHz 8Gb
    Does somebody can help me out? That would be very very nice!

    Hi BlackNikes
    I had exact same problem, but have now resolved it. If your problem is the same as mine your SyncServices folders have been corrupted while itunes was updated.
    See my post or spyder683 post at https://discussions.apple.com/thread/6223064?start=60&tstart=0
    I am running Mavericks 10.9.3 and updated itunes to 11.2.0 and then experienced problems with itunes crashing, 11.2.2 didn't resolve the problem. I found iTunes worked fine if all my other devices (iphone, ipad, ipod) were turned off, as soon as I powered any one of them up and itunes detected them over wifi or USB itunes then froze with the dreaded colored ball spinning.
    In Mavericks 10.9.3 the SyncServices folder is not visible going into the normal library/Application support folder, your instructions below took me to a different area in the system, or at least made these folders visible. Following your instructions I was able to locate and delete both SyncService & SyncServices folders and I launched iTunes again while my devices were powered up and the issue has gone. Bliss!!!
    Many Thanks
    spyder683 wrote:
    Hi Culero,
    The fix of deleting the SyncServices folder is for Mac systems. From your desktop / finder, click the "Go" menu at the top, then "Go to Folder ..." Paste this into the field: ~/Library/Application Support
    The SyncServices folder should be in there. I had both a SyncService and a SyncServices folder. The second one should, when deleted, help with the problem you and I both had of iTunes freezing when an iOS device is plugged in.
    Hope this helps

  • Building SAP applications for iPhone, Android etc.

    Hi All,
    We have a requirement for building SAP online and offline applications for iPhone, Android, Windows phone. These applications would interface with SAP backend (ERP) for fetching data or for executing simple tasks like approvals etc. 
    We have developed thin client (online) applications using Webdynpro Java for Blackberry users. These applications are browser based applications (deployed on SAP Netweaver WAS) and are accessed through Blackberry browser. What I am not sure is whether the same approach/technology like Webdynpro for Java would work for handhelds like iPhone, Android and Windows phones.
    Secondly whether vendors (like Apple) of iPhones, Android etc. provide specific connectors or frameworks for building SAP online/offline applications (or in other words what would be the mechanism for integrating iPhones, Android with SAP)
    Lastly how (technology, architecture etc.) are SAP thick client or offline applications built for iPhone, Android etc.
    Any pointers would be of great help.
    Thanks & Regards,
    Suresh

    Hi Philipp,
    Thanks for your quick response. When you say integrating with "Integrating Custom Client with DOE", do you mean the usage of SAP Mobile Infrastructure (now know SAP NetWeaver Mobile).
    We are mainly looking at building online (thin client) applications and also parallely at building offline or thick client applications but that is second in priority.
    What we have done so far
    We have developed thin client (online) applications using Webdynpro Java (which interface with SAP backend systems)
    for Blackberry users. These applications are browser based applications and are accessed through Blackberry browser. We are looking at similarly building applications for iPhone, Android and Windows phones probably using the same technology like Webdynpro Java.  But we are not sure how well it would work on iPhone, Android etc. Also we were exploring to see if these vendors (iPhone, Android) provide some sort of connectors or framework for quickly developing and deploying SAP mobile thin client applications.
    Please note that we are aware that using webservices in one generic approach.
    Once again thank you very much for your response.
    Regards,
    Suresh

  • HT4623 How to download Built-in-Apps for iPhone 4

    I need to down load Buil-in-Application FaceTime for iPhone 4. Please advise me how to do it step by step.
    By mistake I have delated it.
    Thanks lot

    iPhone does not have a separate FaceTime app.
    Read about how to use FaceTime in the FaceTime chapter of the User's Manual attached here:
    iPhone User Guide (For iOS 6.1 Software)

Maybe you are looking for