Application not found error message

Everytime I try to download a purchased or free ebook (e.g. from Digital Editions site) I get the same error message: it lists the folder name of my temporary internet files\Content.IE5\Y9BKTFY\URLLink[22].acsm then it says Application not found. The code of numbers and letters changes but it is always the full address of the temporary internet folder and then acsm at the end. I have have reinstalled digital editions several times and I have 1.7.1079 version. I could download e-books before Christmas. I turned my firewall off but it didn't make any difference. I tried the bookshop I bought the books from but they couldn't help. I managed the first four from the free page of Digital Editions but not any more. I've tried searching for answers on-line and even opened a web case with Adobe but haven't heard anything. Can anyone help please?
thanks
Abi

Check this Apple document out -> Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Try following the steps in that article, which will have you remove iTunes, Apple Application Support and the other bundled software. Make sure to follow the steps under Verify iTunes and related components are completely uninstalled too, then download and install iTunes again.

Similar Messages

'apple application not found' error message

Every time I try to open my iTunes, I get an error message that says 'Apple Application Support not found, please uninstall iTunes and re download.' I have uninstalled and re-installed, and I continue to get the same message. Help!

Check this Apple document out -> Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Try following the steps in that article, which will have you remove iTunes, Apple Application Support and the other bundled software. Make sure to follow the steps under Verify iTunes and related components are completely uninstalled too, then download and install iTunes again.

"Not Found" Error Message Problem

Hi All!
I have a really weird issue happening that I have not found a post for in the boards, although there are some similar ones. I have a video project that I had been working on about a month ago and finished except for credits (I had no problems while working on it then). I finally just got the list of names to use for the credits, so I went to open the project to add the credits and I got a "Not Found" and "Out Of Memory" Message. I have 134.6 Gigs open on the Raid I save everything to, so I know I'm not actually out of memory. So I changed the settings to 80% Application and 50% Stills b/c I have around 10 jpegs I was using for titles in it. That seemed to help at least get the sequence opened. I then had media offline messages for those titles, eventhough they are in the browser and defined as online, so I just reconnected each one individually anyway. That helped with that problem. However, I FCP won't render the transitions around the titles. I deleted the transitions and titles and tried to re-render the video clips that were involved in the transitions with the titles. It won't render those. When I try to view the clips in the viewer, I get the "Not Found" message again. I reconnected a couple of the video clips individually, but I still get the message when I try to view them in the Viewer. The clips in the sequence are there and play in the canvas but not in the viewer and I get the "Not Found" message. I have it set to view the image without wireframes, so that's not the problem. The source videos are read as online in the browser and are in the same place as they were when I originally started the project, so that's not the problem. I've tried different variations on the memory usage. I've tried copying and pasting to a new sequence but get the same problem. Does anyone know why all of a sudden I can't view any of my source video and the clips I used in my sequence in the viewer and why it would give me the "Not Found" error message?
Some Specs that might be helpful:
FCP HD 4.5
Dual 2 GHz PowerPC G5
2.5 Gigs DDR SDRAM
Raid 1 with 134.6 Gigs Available Space
SD NTSC DV Footage - MPG files I transfered originally from the client's portable hard drive
A Few JPGs of Photoshop Titles
I'm sorry this is insanely long, but I wanted to provide as much detail as I could.
Emily

They were originally on a PC. That quite possibly could be it.
I just checked all the titles again and they are all RGB.
Our Raid ocassionally has problems, so I'm thinking it might have something to do with that.
I'm going to try on Monday to just re-import the videos I need into the project and see how that goes. If anyone has any suggestions, I'll take a look on Monday and see what happens.
I was just hoping that someone might have had this problem and knew what to do.
Thanks for your help!

PCUI Application Not Found eRROR

I would like to use the PCUI, so I was advised to go to transaction se80 select BSP Application from the drop down,type in CRM_BSP_FRAME, click the display button and then click on Pages with Flow Logic. Right click on select.htm and click on test.
This is suppossed to open a browser window where I can find list of BSP Application. Unfortunately whenever click on test I get an error "Application Not Found" together with the url whihc was meant to lead me to
the BSP.
Could anyone help me on this one, we are implementing CRM 4.0 and need it for case management as as other pcui business processes.
We also are implementing the Enterprise Portal, just letting you maybe you caould advise on how best to go about this scenario.

Thank you so much Manuel, Frederick, and SAP Addict for the assistance, you know what I think its my computer that has a problem, because I decided to login from another machine and fortunately when I tried to open the PCUI it did not give me the No Application Error Found message. Instead it is giving me a Network Access Message Error.
On the other hand when I use the machine upon which the Enterprise Portal is being developed, I receive the following error:
"This browser is not supported"of which the default browser is Mozilla. We changed it back to Internet Exp, and the error this time after I logged using my GUI user name and password was a RABAX30 error.
So with regards my error "Application Not Found eRROR" what could be the possible cause, could it be that there are some GUI componentes missing or what???????
Oh I rewarded points to each of you guys, may you please continue with the support will sure reward points

TS1544 "keychain not found" error messages pop up all the time, please help!

Hi, Ive been constantly getting "keychain not found" error messages ever since i updated to OS X and cant sync messages, facetime, calendars etc. i've tried keychain first aid and get this message:
Verification started
Checking keychain configuration for Lee (user ID=501)
Home directory is /Users/Lee
Checked login keychain
Error: login keychain not found
Unable to get info for ~/Library/Keychains/login.keychain, reason: The operation couldn’t be completed. No such file or directory
Checked default keychain
Checked keychain search list
Problems were found; you should choose the Repair option to fix them
Verification failed
Can anyone help?
Thanks

Is there a login.keychain in /Users/username/Library/Keychains/? The message says not. If not, create a new one or restore the one residing in your bootable backup/clone or Time Machine backup.

USB flash memory: "application not found" error

When recently trying to use a USB flash memory stick I was getting an "f:\ application not found" error. I tried all kinds of fixes from Microsoft. Turns out it was caused by Lightroom.
Since the memory stick had photos on it, my computer's Autoplay was trying to launch Lightroom. Problem is, Lightroom is listed as "Lightroom 4.0 64" in the Autoplay menu. I have Lightroom 4.4. As far as I can tell, there's no way I can fix the incorrect "Lightroom 4.0 64" listing. The solution is to remove Lightroom from any Autoplay options.
This is the second such problem I've had with Lightroom. The previous problem was right clicking on a photo file and trying to use the "open with" menu. It worked fine when I had Lightroom 4.3. After updating to Lightroom 4.4, it didn't work. Another Lightroom user found a workaround, which was to rename the Lightroom 4.4 folder back to Lightroom 4.3.
These are both lazy Adobe oversights. You have to realize all the Windows functions that will be affected with an update and make sure they are updated as well. I spent half a day solving this latest USB flash memory error. Get your updating act together.

You don't mention your OS or which version of Outlook you're using.
For Windows, this may be helpful:
http://www.winhelponline.com/articles/236/1/Unable-to-open-PDF-attachments-from-Windows-Ma il.html
Noel

Help opening file - file not found error message

When I try to open an excel file that shows up in the finder, excel opens but then I get a "file not found" error message.
Any ideas what is going on?

Hi Ceeblee,
SOLVED
How ?? This is a forum for sharing solving problems. So even you solved your own issue it would be helpful for others who read your topic to know how you solved. This could be helpful for future problems for other users.
Thanks ...
Dimaxum

How to fix application not found error

I'm running windows 7 and get Application Not Found error when clicking on link. What is the cure?

Hi,
Please click Start-> Run. Type command and press Enter. Type notepad and press Enter.
Copy all the text below:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\exefile\shell\open\command]
@="\"%1\" %*"
Save this as fix.reg to your Desktop (remember to select Save as file type: All files in Notepad.)
Double Click fix.reg and click YES for confirm.
Reboot the computer.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Scanner Not Found Error Message on My Computer

5 years ago, I got an HP inkjet printer and after it was installed, I could never get the scanner to work. I always got an error message (can't remember the wording). Last month, I got a new HP laserjet printer with a scanner, and it is installed, but again, I get an error message when it comes to scanning. This message tells me that there is no scanner found on my computer.
Today, from the panel on the printer, I was able to open up the scanning option. It looks like the only options are to send the scan to an email or to have the scan sent to a flashdrive (USB port). So, if I want to scan a picture, how do I just scan the picture and save it in my documents? Why is the only option to send it in an email or a flashdrive or a network folder? If I try to access the scanner from my computer (instead of using the panel on the front of the printer), it doesn't look like the scanner is connected to the computer even though it is (I went into system preferences and found the printer and both printer and scanner are connected with this new printer).
So, my question is two-fold; why do I get this message saying my scanner is not found on my computer and is the only way to use the scanner is to have it connected to the internet or a USB port, and if so, how do I connect it to my email address or network? I guess I would have to email the scanned picture to myself if I want it on my computer or save it on a flash drive? Thanks for any help.
This question was solved.
View Solution.

Hi @awestruck ,
I see that you are getting a "scanner not found" error message. I would like to help you out today, but I will need to know some more information.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
Depending on which model you have, the features are different.
You should have the HP Software installed for scanning from the computer. You can also use Apple Preview, Apple Image Capture or Print & Scan.
What software are you using to scan with?
How is the printer connected? (USB/Ethernet/Wireless)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can I go back to the old look of the 'server not found' error messages?

After updating to Firefox 32, I noticed that the 'server not found' error messages now look differently. I don't like the new look, so I wonder if you know about an add-on that restores the old look. I've tried searching for it, but I don't know the proper name of these error messages, so I'm not sure what search phrase I should use.

To recall what it looked like before, I did a search: [https://www.google.com/search?q=server+not+found+picture+firefox&client=firefox-beta&hs=wiy&rls=org.mozilla:en-US:official&channel=fflb&tbm=isch&tbo=u&source=univ&sa=X&ei=QUIXVPz7Eou7ogSl8YD4Bg&ved=0CB8QsAQ&biw=1036&bih=554#facrc=_&imgdii=_&imgrc=dFf2lmJRgVlgyM%253A%3BS3EdEuvyajjWqM%3Bhttp%253A%252F%252Fi.stack.imgur.com%252F2ZJR2.jpg%3Bhttp%253A%252F%252Fsuperuser.com%252Fquestions%252F584305%252Ffirefox-says-server-not-found-because-its-adding-www-how-do-i-stop-this%3B851%3B455 Images of Server not found in Firefox]
I did not find an addon, but I did find an old hack for the profile folder in this thread: [http://forums.mozillazine.org/viewtopic.php?f=7&t=492177&start=0]
EDIT:
There was also [https://addons.mozilla.org/en-US/firefox/addon/errorzilla-mod/ ErrorZilla addon]

Boot Device Not Found Error Message

I've had my laptop since May 2011. HP Pavilion dv6
Quad-Core AMD Phenom II 2.2 GHz
DDR3 SDRAM 8 GB
500 GB Serial ATA 7200 rpm hard drive.Originally Windows 7 64-bit upgraded to Windows 10 64-bit One morning I turned on my laptop and I received the following error. The laptop lives on my desk, hasn't undergone any major changes, and I haven't moved or dropped it. I've run every diagnostic test from the F2 menu. The hard drive and memory both passed, the system tune up passed, and I've restored the BIOS to the default settings with no changes. If I hold the power button and restart the laptop usually on the 2nd or 3rd attempt the system will start normally with no issues and continue on as if nothing is wrong. This is a helpful work around but it doesn't solve the problem which is a bit of an annoyance and leaves me worried that eventually it might refuse to start at all. Thinking that a system restore might help I ran a recovery and brought it to an "out of the box" state. After that failed I decided to go ahead and upgrade from Windows 7 to Windows 10. I performed a clean install keeping none of my programs or personal files. Despite a successful Windows 10 install I still receive the same error every time I restart. The short version:When I turn on my laptop I encounter a Boot Device Not Found Error Message.My hard drive passes diagnostic tests.My laptop will start eventually if I continue to power cycle it.

@pkharel ,
Hello and thank you for posting on the HP support forums. So that I can better help you here with this hard drive issue . Can you explain what diagnostic you ran on the hard drive.
Did you run the diagnostics from the BIOS?
HP Notebook PCs - System Diagnostics (F2)
HP PC Hardware Diagnostics
If you have attempted the diagnostics from the BIOS and are not finding the Hard drive. See if you can find the hard drive in another computer. If you can not find it using another computer replace the drive. If you can and it is not located on your notebook then you have a possible issue with the motherboard.
First thing I would do is try and restore your BIOS first.
Restoring the BIOS
After attempting this and you still can not find the Hard drive and you can see it in another system please contact HP phone support for repair options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
If the hard drive is not detected in another system then replace hard drive.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

"Video Not Found" Error Message

Hello all,
This week I started having a problem with non-YouTube streaming video. Everything fails to load or gives me a "video not found" error message.
I tried uninstalling and reinstalling Flash several times with no improvement. Cleared cache, restarted machine. I am at a loss.
Any tips?
thanks!

Have you "hard cycled" your modem and/or router?

Server not found error message

This is the second time I've "posted" this problem. Maybe the first time didn't take.
I get SERVER NOT FOUND error message.

What main page? I take it you did not write your message on the bad
Firefox. There are several things that could be the problem.
Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
* Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet?esab=a&s=Configure+firewalls+&r=0&as=s Configure firewalls so that Firefox can access the Internet.]''' {web link}

11001 not found error message

numerous reinstalls still result in the "11001 not found" error message...

Keren,
Did you follow installation guide. Kindly check
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N50_BB_InstallGuide_EN_US.doc
com.sap.visualcomposer.BIKit is on page 9 of 21.
James

TS3297 I have installed, reinstalled, repaired, retarted and followed all trouble-shooting tasks; Now I am getting "Apple Supprt Application not found: error 2(Windows 5). Please uninstall and reinstall itunes. I have done that. It is listed in my progra

I am trying to install itunes on my computer (Windows Vista). After initial instillation I got an error 42404 A required itunes componenet is not installed; please repair or re-intall itunes and error 50, cannot access itunes store at this time. Please try later. I have done that multiple times; uninstalled all components, reinstalled all components, repaired all components, restarted my computer. I have changed firewall settings to allow acess to all of the apple components. I have made sure the required ports are open. All of the components are showing on the installed programs section of my control panel.
I am now getting an error message that says that Apple Support Application is not found error 2 (windows 5). It is listed in the installed programs and I have repaired it.
I am out of options. And help would be appreciated.

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Application not found error message

Similar Messages

Maybe you are looking for