Application not working after refreshing a page with F5
Hi,
Developed an application with jazn-data for security reason. In my application, i've taskflow with page fragments. In this fragment, i;ve LOv field with client listener to popup LOV using 'F8' key. After refreshing this page using 'F5' key or browser's refresh button, my application gets hanged. Even sign out button also not accessible. In browser's console i got "LaunchPopupUsingF8 is not defined" error. LaunchPopupUsingF8 is my javascript function for LOV popup.
Kindly guide me whats wrong in this...
Edited by: Usha on Sep 26, 2011 5:10 AM
Hi,
I would use JavaScript to disable the F5 button as it leaves the application in an undefined state after refreshing the content from the browser cache
see page 36 onwards (search for F5) for an idea
in http://www.oracle.com/technetwork/developer-tools/jdev/1-2011-javascript-302460.pdf
Frank
Similar Messages
-
i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution
Hi guillermospain,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/ht3500
OS X Mountain Lion: Set up a printer
http://support.apple.com/kb/PH11145
OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/PH11143
Cheers,
- Judy -
RFCs not working after Refresh, is this SecureStore issue?
In our landscape we do frequent system refreshes (DB copy). we use to take out RFC table export and then import them back after refresh. every thing was fine till we upgraded to Netweaver 6.0. Now after refresh most of rfc donesn't work (one which have user ID/ Password in them).
Here is my findings till now:
When we goto SM59 and RFC maintenance screen it give below message:
bold "User Password invalid for identifier /RFC/CCMS (see Long text)"
============================
This is what long message is"
Message no. SR128
Diagnosis
Changes to the global key or system data have invalidated the passwords in secure storage.
Procedure
Enter the user password again.
Procedure for System Administration
You can find detailed error messages for the specified ID in transaction SECSTORE.
======================================
In secstore transaction I found this message for entry:
"System-dependent data for entry /RFC/CCMS changed: TRS / WTH"
Long text for this is:
System-dependent data for entry /RFC/CCMS changed: TRS / WTH
Message no. SECSTORE031
Diagnosis
When accessing the secure storage, the system detected that system-dependent data (installation number or system ID) had been changed.
Entry data: TRS
Current system data: WTH
If you receive this message during a migration process, the "Current system data" field contains the old specified system data instead of the current system data.
The content of both fields can also be empty, if the system cannot determine the data in the current context.
System Response
It is no longer possible to access entries that were created with the previous data.
Procedure
Contact your system administrator.
Procedure for System Administration
For more information, see SAP Note 816861.
========================================================
When I check the note it talk about the system copy and migration key, release key. I don't think this is valid in our case.
Now I tried to find out the tables where secstore stores its data:
RSECACHK Table for Controlling ABAP Programs
RSECACTB Table for ABAP Access Authorization for Secure Memory
RSECTAB Secure Memory: Memory for Encrypted Data
At present we backup following tables:
rfcattrib
rfcdes
rfcdoc
rfcsysacl
Please advise if anybody faces the same issue? does anybody have any solution any notes?
Edited by: Madhusudan Bansal on Oct 22, 2008 9:46 AM
Edited by: Juan Reyes on Oct 22, 2008 1:24 PMI checked all the notes and tables. every thing is correct.
What I think wrong is when we do refresh at that time. SS (secure store) tables from source system come here! we just export and import RFCs but not SS.
All I wanted to know is If we export and import SS tables will this resolve our issue?
can you tell me have you ever did refresh for netweaver? did you face this issue?
appreciate your help -
Applications not working after sync
Hello, Can anyone help, been searching the web to no avail.
I have just invested in an Ipod touch on FW 2.1.1
I installed some apps using the touch via my wifi & they work ok, however when I try to run them after a sync they do not work. They look like they are starting, then back to the menu screen. An ideas??
ps I have downloaded them via itunes store & they will not install to the touch eithern (all boxes ticked to sync etc) very annoyed at this
Thank you- Ok I got it all working agian,... heres what I did: I deleted a app that was'nt working and I synced it with itunes. I then went to: Itunes>ipod>Applications and choose "All applications" under "Sync applications". Now all apps are working, hope all worked with you. Btw the app that I deleted was the Zippo lighter, maybe its glitchy or something.
Message was edited by: TannerRoan
Message was edited by: TannerRoan -
Application not working after migration
Hi,
An application developed in HTMLDB Version-2.0 is migrated to a new server with version-2.2. Few links like edit (to edit rows) are not working. What could be the reasonHi
1) Old URL-
http://es40.au.oracle.com:7778/pls/marvel/f?p=102:1:254279794898873443:fsp_sort_6::RP&fsp_region_id=5100103122412382
2) New URL - http://sgord-dev1.sg.oracle.com:7780/pls/apex/f?p=135:1:1558885729019129 (which is not working)
3) Application ID before migration - 102
4) Application ID now is - 135
If I login as Admin, all links are working properly, and can edit everything. But if I login as different user edit links and dropdowns are not displayed.
Regards,
Pallavi -
Applications not working after upgrade from apex 3.2 to apex 4
hi,
we've created an application with apex 3.2 which works fine.
today we upgraded apex 3.2 to apex 4. after the upgrade the application doesn't work anymore.
we recognized the following things:
- interactive reports don't work anymore
- tabs don't work anymore
- buttons don't work anymore
what do we have to do, to get our apex 3.2 application to work with apex 4?
regards,
matthiasI've seen similar problems to my applications. I've found a problem with the derived columns or link columns in reports. The only solution I founded is to delete the columns and then make them again. Now are working. No problem founded specifically for the interactive reports. If there is an automated solution for the derived columns or link columns it will be appreciated ;-).
-
Applications not working after update
Hi there,
I'm new to Mac world, so please bear with me. My applications were working fine before I updated few programs and the OS. After the update, they stopped working! When I click on the icons on the dock to open any application, all what they do is bouncing and then nothing. The only icon that opens is the System Preferences.
Any help will be appreciated.
Thanks a lot.Disregard my question guys, they work fine after a restart.
Thanks a lot -
Java script will not work after creating new page
I am using dreamweaver cs3 and have a java script to rotate a banner in a template. This script has worked fine in the past when I created pages in Dreamwever. Now the script works fine only when I test it in a template but when I try to upload to my ISP the script will no longer work. At first I thought it was the ISP made changes but the person who sits next to me running the same version of Dreamweaver can create a page and the java works. The java is placed in a template, tested by viewing in a brower and it works, however once I try to create a new page using the template the scriipt will not work. To get around this I have the person sitting next to me save my template and then I can create pages. Also if I save the template with my pc and it updates the pages created by the template the java will no longer work.
This is very frustrating as I cannot create or modify my template on this pc. What would prevent this from working?OK - now we are on to something ..... the script on the template only contains:
function randomImages(){
if(counter == (imgs.length)){
counter = 0;
MM_swapImage('rotator', '', imgs[counter++]);
setTimeout('randomImages()', delay);
However when I create a new page from the template with this javascript in it the code changes to:
function randomImages(){
if(counter == (imgs.length)){
counter = 0;
MM_swapImage('rotator', '', imgs[counter++]imgs[i]);
function randomImages(){
if(counter == (imgs.length)){
counter = 0;
MM_swapImage('rotator', '', imgs[counter++]);
setTimeout('randomImages()', delay); -
Apex Application not working after importing to my apps schema...
Hi friends,
I created one DB application in my sample schema that is associated with apex 4.0.....
Application details:
*) login page(where i will be giving username and password)
*) page 1 (consist of several form fields, like
--->name:
--->module:
--->projects:
----->email:
the above are the fields, if i put any entries in the above field means, it will get automatically inserting in the report column, which is also in the same page consist of the above fields in the table manner...
since this report table consist of an edit icon in front, if i clicked the edit icon of an one row means, it will go to another page..
*) i.e. page 3(consist of the same fields with entries in it automatically corresponding to the each and every row, suppose if i want to update any changes means i can update in it....
this is my application that i developed it is working well with in the sample schema apex 4.0..
What i did is i created a new workspace with APPS schema in it...and i have imported my application that i developed in sample schema to APPS schema....
Since after importing to APPS schema...when i tried to open the application, it is not showing any datas in it...That is due to the tables that are supporting the application is not in APPS schema, so what i did is i have given grant privilege to the respective tables and also i have created a synonym for accessing the table in APPS schema for supporting the application.....
Now if i tried to put any entries in the form in page 2, it is getting inserting in the report column which is also in the page2....
But my problem starts here, if i clicked the edit icon symbol in each and every row of the report column it is going to the page 3 which has a respective form fields, but it is not showing any entries in it automatically, and if i tried to put any entry in it, it is not getting updating in the report table......
why this problem occurred for my application in APPS schema....But my application works very well within the sample schema......why it is not showing any entries in the form automatically soon after i clicked the edit icon in each and every row.....
i couldn't know what is the real problem behind this..... help me friends.
As this is my urgent requirement in my project..Reply me ASAP...
Thanks in Advance..
Regards,
Harry...First, try a system reset although I can't give you any confidence. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Applications not working after resetting macbook from external hard drive
I installed Snowleopard a few weeks ago. Everything was working fine, though a bit slow for a while, I figured it was just because I have had the computer for a while, but about a week ago it shut down and wouldn't restart. It would go to the login page where i would type in my password but wouldnt log in to my desktop. I did what apple suggested on their website and reset everything and restored my computer settings from the time machine backup on my external hard drive and reinstalled snow leopard with the install dvd. Everything was seemingly back to normal, but now most of my applications are not functioning correctly. I can't use isight with skype (though it works with photobooth), I can't import photos from my camera to iphoto, imovie won't even open (displays "imovie quit unexpectedly" and other things of this nature.
Since seeing that multiple applications are not functioning correctly, I kind of figure that its not an isolated problem with just one application but maybe something wrong with my OS since I reinstalled it? I've tried resetting my PRAM and NVRAM but that hasn't made any noticeable change at all.
I'm about ready to give up and take it in somewhere to be looked at unless someone can give me some good advice on how I can fix it myself? All suggestions appreciated.
ThanksI realize this post is from quite some time ago, but it showed up as relevant in my own search to resolve this problem. So hopefully my answer will be equally visible and thus helpful.
Select the movie file within iTunes (not the actual file(s) in the finder) and drag it to the desired location on your external hard drive. While doing so, you'll notice an indicator showing that you're in fact moving two files: the movie (m4v) file and the associated Extras (ite) file.
The first time I attempted this process, I selected the files within the Finder and dragged them to the external hard drive. I was able to play the movie itself from this location, but the Extras wouldn't play. After spending a considerable amount of time searching for a solution I tried the afore mentioned and it worked.
No promises, but hopefully this will work for some of you out there and save you some time and frustration.
Signing off...
~B -
Application not working after deployment in remote server
I have a standard web application working in my localhost. But when I deploy the same in a remote server it gives the following exception. This happens for all the jsp:useBean. why is the container not able to fund the Beans. The Tomcat is installed properly and I use it's manager tool to deploy the WAR.
I checked the WEB-INF/lib directory and it has all the required JARs.
Error:
org.apache.jasper.JasperException: Exception in JSP: /test/CurWeatherBean.jsp:22
19: <a href="index.jsp">[ index ]</a>
20:
21: <h2>CurrentWeatherMapBean.ATOMICS</h2>
22: <jsp:useBean id="cwmDAO" class="com.news.pub.weather.CurWeatherBean$ATOMICS" scope="request"/>
23: <ul>
24: <li>
25: <h3>List<CurWeatherBean> get()</h3>
Stacktrace:
org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:506)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:395)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
java.lang.NullPointerException
com.news.pubt.forc.oc.Container.getReference(Container.java:68)
com.news.pubt.forc.cfg.PropertyBag.getBag(PropertyBag.java:80)
com.news.pubt.forc.cfg.PropertyBag.getProperty(PropertyBag.java:60)
com.news.pubt.atomicsbeans.impl.ATOMICSBean.<init>(ATOMICSBean.java:61)
com.news.pubt.atomicsbeans.ATOMICSAwareBean.<init>(ATOMICSAwareBean.java:175)
com.news.pubt.weather.CurWeatherBean$ATOMICS.<init>(CurWeatherBean.java:131)
org.apache.jsp.test.CurWeatherBean_jsp._jspService(CurWeatherBean_jsp.java:65)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)Please help me.
Edited by: danbrown on Feb 8, 2008 8:32 AMYour error stack refers to a class with the package sequence "com.news.pubt.weather....." but your jsp file refers to a class "com.news.pub.weather...
Is there an error in your jsp page? If so, did you change the package name, and do you still have old class files on the classpath on your local machine with the old name?
Anyway, the top of the error stack refers to line number 68 in the Container class. So that is where you should see a problem regarding the NullPointerExcpetion. You could post that line of code. -
Many applications not working after Quicktime downgrade gone wrong.
I have: MacBook Pro, OS X 10.4.11, Tiger
After the most recent Quicktime update (I think 7.5), AVI files that were moved or added afterwards would play video, but no audio.
I tried to uninstall Quicktime in order to install version 7.2. I deleted the QT files from the Application and Library folders.
When I tried to install QT 7.2, I kept getting a message that the 7.2 installation couldn't be completed because a newer version was already installed.
I downloaded Pacifist and used it to install QT 7.2 and restarted the computer.
When it rebooted the info that is normally in the upper right side of the screen is gone: the time, airport status, sound status, Spotlight icon, etc. And the Spotlight icon flashes randomly, but nothing happens if I try to open it. Quicktime still wasn't installed and now iTunes won't open, it just has a message saying "The application iTunes quit unexpectedly." Same with MS Word, iCal, GarageBand... The only applications that seem to be working are Safari and TextEdit. But Safari closes and displays the same message when trying to play a Youtube video.
I tried installing Quicktime again, without Pacifist, and it said the installation was complete and restarted. However, Quicktime won't open at all now, the icon jumps in the dock but nothing happens.
I also just found a Leopard installation DVD - if I installed it, would it be like starting from scratch with a working system? Would it wipe out all my files?
Any ideas?
Message was edited by: thoma107
Message was edited by: thoma107To Apple Discussions!
Because QT is intergrated throughout the OS system, you cannot uninstall it completley from the computer. Most Apple application depend on QT in order to function properly.
*The safest way to put things right:*
Do an archive and install of your OS from the OS disc. Stop at the QT upgrade you need and/or want.
http://docs.info.apple.com/article.html?artnum=301270 Scroll down to "Archive and Install”
IMPORTANT: Maker sure you select "preserve user preferences and data" when you performed the A&I?
Good luck -
Applications not working after archive reinstall
After a new optical drive, the tech at the mac store suggested that I clear up some space and archive reinstall. I did, and now all applications are seriously crashing - For ie iPhoto's icon just bounces then notifies that it has 'Quit Unexpectedly', and is now constantly failing to open. iTunes says the file cannot be read because it was created by a newer version. I don't know why. I do have Time machine backup's. Any suggestions on a next step....
I had upgraded to Leopard 10.5.6 last year and it was those new Leopard Install disc that I used for the archive reinstall because the option to preserve user data was greyed out when I tried my original discs that came with the iMac.
Message was edited by: circularlogikHave you run Software Update yet?
There are frequent updates to the OS after the disc is released. The last release of Leopard is 10.5.8.
I just did an archive and reinstall from 10.5.1, and the Mac OS X Combined update for me is 768Mb! -
Applications not working after Anna update
Hi all,
I have just updated my N8 with the Anna update and the applications 'Lyrics' & 'GPS Info Qt' won't start up. Has anybody else had the same problem or can suggest a possible fix?
Thanks in advanceMaybe these apps are not compatible with Anna. Try uninstalling those and install afresh. May solve your problem.
In Love With My C6-01:Now running on Nokia Belle! -
When I open Firefox, the bookmark menu is a little tab in the upper left corner. If I go to view and un-click bookmark menu and then view, click it, the standard menu bar shows up. The Back and Forward buttons don't work. The navigation window does not show the URL of the current page. When opening, the home page does not come up. The wheel click works on the bookmark bar, but not within a page. The menu (file, edit, etc) does not work after the first page. Version 8 worked well. When I upgraded to version 9, all this trouble started. I backed up to version 8, but the problem persists.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox
Maybe you are looking for
-
Please see above
-
Suppose if i want to display the standard text "PURCHSE ORDER REPORT". HOW CAN I USE THE FM read_text (for example header window) could you please explain it Edited by: Alvaro Tejada Galindo on Apr 21, 2008 3:37 PM
-
PopUp Manager and Flex Forum PopUps
I wanted make sure I understood what someone on the Forum told me about the PopUpManager and TitleWindow. My question was: "How are the PopUps that appear when you hover over a person's image/profile on the left side of this Adobe Forum's page done?
-
How do I login to my macbook pro if I forgot my password?
How do I login to my macbook pro if I forgot my password?
-
How do I resolve a error message when I open iTunes? The error message is 'an unknown error occured (-42110)"