Application not working in Quality, which was working fine in Dev. Urgent!!

Hello Guru's,
We are experiencing a problem in portal.
Issue: We customized application in MSS( General Information which calls FM in the backend to populate the data) using NWDS and deployed the application into Development System and it's working fine. so we used NWDI to transport the code into Quality and the application is not working fine in Quality. The Issue is when transported the application into Quality it is not showing any data. and when checked the RFC trace it is not showing any FM been called when accessing the application. And also when checked in NWA it is not showing any error, when checked the JCo connections they are working fine.
Anyone please help us out. It's very Urgent.
Thanks in Advance.
Regards,
Pramod
'Points will be awarded for sure for helpful answers.'

Hello Harini,
Thank you for the reply, and I was expecting answer from you. Was seeing other forums and your replies to those .
Anyways Let me tell a little more on the issue:
We are implementing ESS/MSS in portal as per the req. we need to create a custom iview with employee details. And for that we have created a FM which will pick up the data and we are accessing that Function Module in WebDynpro application.
We deployed the code into QA and Prod In prod it is working fine but in quality it's giving 500 Internal Server Error
when checking the log file we are not getting any error logged. and checking in the R/3 whether that FM is executing when accessing the application using ST05 tcode it is not showing up the RFC trace either.
And Configuration of QA is same as Prod and all the permission are properly assigned.
Just wondering how is a application responding differently in different landscapes.
Looking forward for a solution.
Appreciate your time and help.
Regards,
Pramod

Similar Messages

Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it a

Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it actually says not moblie network available, when everyone else in my family has coverage and are on my plan with iphones. I am missing text messages and dropping calls left and right. This is unacceptable for the cost of this phone and my service. I have did a hard reset etc. What else can I do??

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

HT1414 I have an Iphone 3GS 16gb which was working on ios 4.1.1 The phone isn't factory unlocked. I upgraded it to IOS 6.0.1 and after that i am not able to search for networks. it shows no services.

I have an Iphone 3GS 16gb which was working on ios 4.1.1
The phone isn't factory unlocked. I upgraded it to IOS 6.0.1 and after that i am not able
to search for networks. it shows no services.

Ok thank you so much! Although I ended up taking the sim card out of my new Iphone and reinserting it into my old one it finally let me restore it! So thanks once again this really helped!

My bluetooth just keeps searching on my new iPhone 5s and does not recognise my car bluetooth which was working perfectly with my 4s.

My bluetooth just keeps searching on my new iPhone 5s and does not recognise my car bluetooth which was working perfectly with my 4s.

Maybe it's because of Mfi approving (https://developer.apple.com/programs/mfi/)
I have Sony bt GPS but can't use it with my wifi iPad because it's not approved.

Report which was working has suddenly stopped

Hi I have a report which was working and has now just stopped.
Here is the relevant log file extract
rshost!rshost!eec!01/23/2014-12:16:07:: e ERROR: HttpPipelineCallback::SendResponse(): failed writing response.
rshost!rshost!eec!01/23/2014-12:16:07:: e ERROR: Failed with win32 error 0x10DD, pipeline=0x00000000007BFE90.
library!ReportServer_0-2!8c4!01/23/2014-12:19:41:: Call to GetPermissionsAction(/UAT).
library!ReportServer_0-2!1278!01/23/2014-12:19:41:: Call to GetPropertiesAction(/UAT, PathBased).
library!ReportServer_0-2!8c4!01/23/2014-12:19:41:: Call to GetPropertiesAction(/UAT, PathBased).
library!ReportServer_0-2!1278!01/23/2014-12:19:41:: Call to GetSystemPermissionsAction().
library!ReportServer_0-2!8c4!01/23/2014-12:19:41:: Call to ListChildrenAction(/UAT, False).
library!ReportServer_0-2!1278!01/23/2014-12:19:41:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!1278!01/23/2014-12:19:41:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!8c4!01/23/2014-12:19:41:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!8c4!01/23/2014-12:19:41:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!1278!01/23/2014-12:19:44:: Call to GetPermissionsAction(/UAT/Copy (2) of Givex Members Store And Other Stores Visited).
library!ReportServer_0-2!1278!01/23/2014-12:19:44:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!1278!01/23/2014-12:19:44:: Call to GetPropertiesAction(/UAT/Copy (2) of Givex Members Store And Other Stores Visited, PathBased).
library!ReportServer_0-2!1278!01/23/2014-12:19:44:: Call to GetSystemPermissionsAction().
library!ReportServer_0-2!1278!01/23/2014-12:19:44:: Call to GetSystemPropertiesAction().
library!WindowsService_0!a14!01/23/2014-12:19:45:: i INFO: Call to CleanBatch()
library!WindowsService_0!a14!01/23/2014-12:19:46:: Using folder C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\RSTempFiles for temporary files.
library!WindowsService_0!a14!01/23/2014-12:19:46:: i INFO: Cleaned 0 batch records, 0 policies, 1 sessions, 0 cache entries, 2 snapshots, 10 chunks, 0 running jobs, 0 persisted streams, 3787 segments, 3787 segment mappings, 0 edit sessions.
library!WindowsService_0!a14!01/23/2014-12:19:46:: i INFO: Call to CleanBatch() ends
library!ReportServer_0-2!1080!01/23/2014-12:19:55:: Call to GetPermissionsAction(/UAT/Copy (2) of Givex Members Store And Other Stores Visited).
library!ReportServer_0-2!1080!01/23/2014-12:19:55:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!1080!01/23/2014-12:19:55:: Call to GetPropertiesAction(/UAT/Copy (2) of Givex Members Store And Other Stores Visited, PathBased).
library!ReportServer_0-2!1080!01/23/2014-12:19:55:: Call to GetSystemPermissionsAction().
library!ReportServer_0-2!1080!01/23/2014-12:19:56:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!1080!01/23/2014-12:19:56:: Call to GetPermissionsAction(/UAT/Copy (2) of Givex Members Store And Other Stores Visited).
library!ReportServer_0-2!9b0!01/23/2014-12:19:56:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!9b0!01/23/2014-12:19:56:: Call to GetPropertiesAction(/UAT/Copy (2) of Givex Members Store And Other Stores Visited, PathBased).
library!ReportServer_0-2!1080!01/23/2014-12:19:56:: Call to GetSystemPermissionsAction().
library!ReportServer_0-2!9b0!01/23/2014-12:19:56:: Call to GetSystemPropertiesAction().
library!ReportServer_0-2!1080!01/23/2014-12:19:56:: i INFO: RenderForNewSession('/UAT/Copy (2) of Givex Members Store And Other Stores Visited')
webserver!ReportServer_0-2!1080!01/23/2014-12:23:16:: i INFO: Processed report. Report='/UAT/Copy (2) of Givex Members Store And Other Stores Visited', Stream=''
rshost!rshost!344!01/23/2014-12:25:46:: e ERROR: HttpPipelineCallback::SendResponse(): failed writing response.
rshost!rshost!344!01/23/2014-12:25:46:: e ERROR: Failed with win32 error 0x0057, pipeline=0x00000000007BFA40.
httpruntime!ReportManager_0-1!344!01/23/2014-12:25:46:: e ERROR: Failed in BaseWorkerRequest::SendHttpResponse(bool), exception=System.ArgumentException: Value does not fall within the expected range.
at Microsoft.ReportingServices.HostingInterfaces.IRsHttpPipeline.SendResponse(Void* response, Boolean finalWrite, Boolean closeConn)
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
library!ReportManager_0-1!344!01/23/2014-12:25:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException: RsWorkerRequest::FlushResponse., Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeInternalException:
An internal or system error occurred in the HTTP Runtime object for application domain ReportManager_MSSQLSERVER_0-1-130349526093939666. ---> System.ArgumentException: Value does not fall within the expected range.
at ReportingServicesHttpRuntime.BaseWorkerRequest.SendHttpResponse(Boolean finalFlush)
at ReportingServicesHttpRuntime.RsWorkerRequest.FlushResponse(Boolean finalFlush)
--- End of inner exception stack trace ---;
rshost!rshost!344!01/23/2014-12:25:46:: e ERROR: HttpPipelineCallback::SendResponse(): failed writing response.
rshost!rshost!344!01/23/2014-12:25:46:: e ERROR: Failed with win32 error 0x10DD, pipeline=0x00000000007BFA40.
Kind Regards
William Walley

Hi Alisa,
I have increased the timeout to 250000, and it is still throwing an error, here are the details from ExecutionLog2 view
InstanceName ReportPath
UserName ExecutionId
RequestType Format
Parameters ReportAction
TimeStart TimeEnd
TimeDataRetrieval TimeProcessing
TimeRendering Source
Status ByteCount
RowCount AdditionalInfo
SNK-SQL04\MSSQLSERVER /Marketing/Givex Members Store And Other Stores Visited
SPACENK\ww vgdvzym3la13m345rjyhf3jz
Interactive RPL
CompanyId=1&StoreId=34 Render
2014-02-03 10:13:12.030 2014-02-03 10:20:37.713
281028 45393
119026 Live
rsSuccess 361819673
266850 <AdditionalInfo><ProcessingEngine>2</ProcessingEngine><ScalabilityTime><Pagination>0</Pagination><Processing>0</Processing></ScalabilityTime><EstimatedMemoryUsageKB><Pagination>38124</Pagination><Processing>196375</Processing></EstimatedMemoryUsageKB><DataExtension><SQL>1</SQL></DataExtension></AdditionalInfo>

Hi i upgrade from lion to mountain lion to day on my mini mac,Since the upgrade i am getting no sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever

Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.

Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.

Hi, I have a freecom 1TB hard drive which was working fine until it froze. I pulled it out (mistake I now know) and now it doesn't mount. It shows up in Disk Utility but won't manually mount. When I try to repair it gives message 'failed on exit'. hel

Hi, I have a freecom 1TB hard drive which was working fine until it froze. I pulled it out (mistake I now know) and now it doesn't mount. It shows up in Disk Utility but won't manually mount. When I try to repair it gives message 'failed on exit'. Some people have said to try Disk Warrior, but at $100 it's quite expensive maybe fix. help!

You likely need to reformat the drive which will destroy all data and you need a backup to restore it. If no backup is present then a data retrieval service can be more expensive than DiskWarrior. There is software that can rescue the data but I can not vouch for it's effectiveness as I have always maintained backups. .
http://www.prosofteng.com/
http://www.wondershare.net/ad/data-recovery-mac.html?gclid=CLTp3Mj07rkCFevm7AodL lUAHw
http://diskdoctors.com/software/mac-data-recovery/utility.asp?gclid=CMyf_MH17rkC Fcvm7AodSE0A8A
http://www.cleverfiles.com/

I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. Where can I download ios 4.3.5 from?

I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. My pc didn't create a backup before updating software so I can't revert back to ios 4.3.5 from there, where can I download ios 4.3.5 from?

I tried just about everything and finally brought my Ipod touch to the apple store. The tech installed ios 4.3.5 but still no WIFI. He recommended a $149 exchange - not really a bad deal with a new battery and 90 day warranty, but I thought I'd try again.
The "solution" was bizarre. On YouTube was a fix involving taking the motherboard out and heating the wifi components with a heat gun.
I did not like that idea, but another involved turning it off, putting it in the freezer for five minutes and restarting. It worked! I must admit the fix does not work reliably, so I may still go for the exchange. Still, I am now convinced that it is a hardware problem. i remember back in the old days, TV repairmen sprayed a suspected bad resistor with Freon. The chilled component would work long enough to identify what needed replacement. Perhaps something similar is happening here.
For anyone wanting to try this, I found it more convenient to place the back of my ipod on a frozen cold pack until the wifi is restored. It seems to happen when condensation forms on the face. I used a towel to wipe off the moisture so as not to add to the problem.

I have bought a second hand 3gs on O2 which was working fine and since restoring it (which put ios5 on) it now keeps saying no sim and has searching in the top left corner which then says no service once itunes asks for a sim to be inserted to activate?

I bought an iphone 3gs on o2 which was working fine till i restored it (which put ios5 on to it) now it wont activate, it keeps saying on itunes no sim inserted and on the iphone it has searching then says no service! Any ideas what i can do as cant get any further!

Some SIM cards were affected by iOS updates. Either contact O2 to get a replacement SIM or pop into a local phone shop and pick up a replacement SIM.
Once you have your new SIM, O2 have a swap my SIM page on their web site here:
http://swapmysim.o2.co.uk/
Follow the instructions on the O2 page and you should be up and running.
O2 do say it can take up to 24 hrs for SIM to be active, but I found it usually only takes half an hour or so before the new SIM is active.
Hope this helps.

My Ipod was in my back pocket and when I took it out it has a white screen with 3 grey lines going threw it, and not even 5mins before, it was working fine... what could i be? it also isnt hooking up to itunes... please help

My Ipod was in my back pocket and when I took it out it has a white screen with 3 grey lines going threw it, and not even 5mins before, it was working fine... what could i be? it also isnt hooking up to itunes... please help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT201210 I have Geo Asian TV App on my IPad which was working fine before loading ios6. Now if try to run the video in this app, it says adobe reader or html5 required. Can you help

I have Geo Asian TV App on my IPad which was working fine before loading ios6. Now if try to run the video in this app, it says adobe reader or html5 required. Can you help

It may have used the YouTube app that is no longer included in iOS. Try downloading the YouTube app in the App Store and see if it works.

When I add a new contact number to my iphone 5c and I try to select the iphone choice is not showing up; and it was working fine the day before. ?

when I add a new contact number to my iphone 5c and I try to select the iphone choice is not showing up; and it was working fine the day before. ?Also when I try to send an imessage is not going trough as an imessage, it makes me send it as a message.

You're using Exchange Active Sync to synchronize contacts and calendars with your company Exchange Server. If the default calendar/address books are set to the Exchange account, it will sync automatically. This is normal.
Go to Settings>Mail, Contacts, Calendars to change the default address book and calendars to a something else, iCloud or something synced from your home computer instead.

After upgrading my Macbook Air to OS Yosemite it doesn't recognise the 3G USB modem which was working previously. Any ideas

After upgrading my Macbook Air to OS Yosemite it doesn't recognise the 3G USB modem which was working previously. Any ideas?

Hi ..
Reset the PRAM > About NVRAM and PRAM
Those instructions are for Mavericks but will work on Yosemite as well.
Then try the USB modem.

I have CS5 and LR5. they will not talk anymore. Everything was working 5 days ago. I can no longer access CS5 from LR5 edit, then drop it back into LR5. Need support

I have CS5 and LR5. they will not talk anymore. Everything was working 5 days ago. I can no longer access CS5 from LR5 edit, then drop it back into LR5. Need support

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop ("CS5" won't do for instance; we would need CS5 vers 12.0.2 or whatever) and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I have a question related to patch download using ftp which was working in

Hi,
I have a question related to patch download using ftp which was working in Classic Metalink.
ftp updates.oracle.com allowed to download patches before but now it says the following.
$ ftp updates.oracle.com
Connected to updates.oraclegha.com.
421-*********************** Downtime Notice ************************
421-
421-This service was retired as of November 06, 2009.
421-
421-****************************************************************
421
Is there a way to download patches now using command prompt. I couldn't see category for metalink in forums hence posted here.
Regards,
Nagendra Chillale

Enter the following command where username and password are your My Oracle Support login and password and filename is the patch file name that you copied from the Properties window::
wget http-user=username http-password=password no-check-certificate output-document=filename "http://updates.oracle.com/Orion/Download/download_patch/<filename>"
For example, to download patch 7154429 for Linux where the patch file name is p7154429_10204_Linux-x86.zip, enter:
wget http-user=[email protected] http-password=password no-check-certificate output-document=p7154429_10204_Linux-x86.zip "http://updates.oracle.com/Orion/Download/download_patch/p7154429_10204_Linux-x86.zip"
My Oracle Support FAQ ID 747242.5
Regards,
Nagendra Chillale
Edited by: user12023326 on Dec 16, 2009 11:43 AM

Application not working in Quality, which was working fine in Dev. Urgent!!

Similar Messages

Maybe you are looking for