Application not working in windows 8

Hello Sir,
I have Lenovo Z500 laptop recenty brought.
When i Run any application in windows 8 It will error as shown in below 1st image.
So how to solve this error.
I troubleshoot that program. but still it is not working.
Hope this will solved out soon...
And I try to install microsoft office 2013 365 days pack but it is also not stating.
all .net framework installed in my laptop those are displayed In 2nd image.
Thank you

Hi sanketec87,
I would restore the computer with the factory defaults.
A problem probably occured with the previous install of Windows 8.
Vince.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Similar Messages

Exporting Crystal Report to HTML is not working in Windows 7

Hi Sir,
I am trying to export Crystal Report to HTML format using VB.NET code. Functionality is working fine at Windows XP Environment (Save to Disk, Open an Application and Email Attachment). But the same functionality is not working at Windows 7 Environment (both 32-Bit as well as 64-Bit).
Below is the code to Exporting Crystal Report to HTML in VB.NET.
Dim CrDiskFileDestinationOptions As New DiskFileDestinationOptions
Dim CrFormatTypeOptions          As New HTMLFormatOptions
Dim vFormat As Integer
Dim CrExportOptions As New ExportOptions
Dim vRdReport As New ReportDocument
Dim sfd As SaveFileDialog
Dim vFileName As String = Nothing
vRdReport = vRptSource
sfd = New SaveFileDialog
If Not (vRptPath = "") Then
    sfd.InitialDirectory = vRptPath
End If
sfd.Filter = "Webpage, Complete(.htm;.htm)|.htm|Web Archive, Single file(.mht)|.mht|Webpage, HTML only(.htm;.html)|.html"
If sfd.ShowDialog = DialogResult.OK Then
    ' Set the disk file options.
     CrDiskFileDestinationOptions.DiskFileName = sfd.FileName.ToString()
Else
     Return
End If
CrExportOptions = vRdReport.ExportOptions
CrFormatTypeOptions.HTMLFileName = vFileName
CrFormatTypeOptions.HTMLEnableSeparatedPages = True
CrFormatTypeOptions.HTMLEnableSeparatedPages = True
CrFormatTypeOptions.HTMLHasPageNavigator = True
CrFormatTypeOptions.UsePageRange = True
With CrExportOptions
                    .ExportDestinationType = ExportDestinationType.DiskFile
                    .ExportFormatType = ExportFormatType.HTML32
                    .DestinationOptions = CrDiskFileDestinationOptions.DiskFileName
                    .FormatOptions = CrFormatTypeOptions
End With
vRdReport.Export()
Catch ex As Exception
        MsgBox(ex.ToString)
End Try
Code working fine at Windows XP, But it is not woking in Windows 7 environment.
Please can anyone share your valuable thoughts or ideas reg. this.
Thanks in Advance
Deivanayaga Perumal D.

user13509659 wrote:
Run this code to reproduce the issue.Which issue?
It looks like inheritance is broken in the component hierarchy for JFrame in Windows 7 JDK 1.6.0_23-b05. The only thing remotely related to inheritance in your code snippet is the WindowListener, which does little. See camickr's advice about built-in exit management.
EDIT - using the post title as a clue, I realize you may be talking about the component hierarchy, and whether the contentPane's background is visible through the upper layers. Instead of guessing, I'd prefer you describe your "issue" accurately (observed vs expected behavior).
Edited by: jduprez on Feb 10, 2011 1:01 PM

Flash player does not work in Windows 8 tiles

Flash player does not work in Windows 8 start metro tile applications. Flash player also does not work in Windows 8 start tile internet explorer 10 1n windows 8. Flash player does work in Windows 8 desktop internet Explorer 10. I tried all of the recommended fixes suggested by adobe Flash Player Issues/windows 8 page. I have reinstalled Windows 8 operating system. What should I try next?

This is a known issue with Flash Pro CC - GM build.
this crash has been fixed in the update that was released recently. Please update to 13.0.1.808 version and it should fix this.
Please reply if it still persists after the update.
-Sujai

ITunes 12.1.1 does NOT work with Windows - Fix??

Hi everyone,
I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly. Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components. It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version. I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

CaptureDeviceManager.getDeviceList is not working in Windows VISTA.When

CaptureDeviceManager.getDeviceList is not working in Windows VISTA.When I run the Application from vista using a jar file.But it is running if i run it from class file without use the jar file.

This pretty much says it all:
No connection could be made because the target machine actively refused it.What version of Vista?
What version of the agent? ... 10g is not a version number it is a marketing label
Did you check to see if the agent is compatible with your operating system?
My recommendation would be to get a real operating system: Either Oracle Linux or XP.

Redirect Printer is not working in windows 2008 R2 Server( Server Running as AD and Terminal Service(both role in single server))

Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686

Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab. PC’s are listed Under Client Name by their computer name. Take Note of the corresponding
ID. We will use this to locate the Printer information in the Event Log.
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client. The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.” Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint. I would try the the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.
Thanks,
Jeremy

New HP probook 440 G1 internet explorer ver.11 not working in windows 8.1 64 Bit

New HP probook 440 G1 internet explorer ver.11 not working in windows 8.1 64 Bit. When I open it closed or crash in a moment.Please help for the issue.
M Khan

Hi,
I suggest you check the fix in this article:
Fix: Internet Explorer freezes, crashes, hangs in Windows 7 | 8
http://www.thewindowsclub.com/internet-explorer-freezes-crashes-hangs
If it doesn't work, please help to post back the IE crash dump file here for our research:
First enable app crash dump collection by copying following words into notepad, saving it as dump.reg and importing it:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\localdumps\iexplore.EXE]
"DumpFolder"=hex(2):63,00,3a,00,5c,00,63,00,72,00,61,00,73,00,68,00,64,00,75,\
00,6d,00,70,00,73,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
Then, open IE to repro the issue. If crash issue appeared, please find the crashdump file under c:\.
To further help you, please upload this file into Skydrive and shared the link here.
Also, you can try to analyze dump by yourself if you would like to：
How to analyze app crash dump file:
http://blogs.technet.com/b/askperf/archive/2007/05/29/basic-debugging-of-an-application-crash.aspx
Kate Li
TechNet Community Support

Palm Desktop 6.2.2. and Lookup function not working in Windows 7

Palm Desktop's lookup function not working in Windows 7 64bit. Please help.
Post relates to: Centro (Verizon)
This question was solved.
View Solution.

I was able to solve this by unchecking compatibility mode and setting the application to run as administrative.

ActiveX control is not working with windows NT

I've have a stand alone application which uses an activeX control. The application was compiled using Labview 7.1 on a Windows XP machine. The application will run without any problems on Windows XP and Windows 2000, however the activeX control will not work with Windows NT 4.0. The activeX control is registered, and I have also compiled the application on a Windows NT 4.0 machine. I do not receive any error messages, the application will start but will not communicate with the activeX control. Does anyone have any suggestions?

Hello,
Have you tired running the VI by itself (not exe) on the NT machine? Make sure you are doing adequate error checking in your code. It could be possible that the application is generating an error which in not handled appropriately. Also which service pack do you have installed on the NT machine? Please look at the release notes for LabVIEW 7.1 here.
Regards,
Chetan K
Application Engineer

AC97 onboard sound DOES NOT WORK under Windows 2000

Just an FYI, the AC97 Audio on your MSI mainboard will not work under Windows 2000, for which the AC97 hardware is not certified. If you try to use it, your audio output will be intermittant at best and will crash your audio applications at worst. A maddening and disheartening problem for people like me who didn't realize the problem existed and spent many hours trying to getting it to go away.

hiya -
I am have this trouble as well!
Are you useing professional, or Advaced server?
I have done EVERY kind of update... so dice.
*sniff *

Valuemotion driver version 5.01 not working with windows xp

The valuemotion driver version 5.01 is not working on windows xp. When used it does not work properly on MAX automation explorer.Please Guide me as to how I should proceed??

I am not sure exactly what behavior you are seeing, but you will want to upgrade to the latest version of Valuemotion 5.0.2 from the following link:
http://digital.ni.com/softlib.nsf/websearch/68E44A959190305F86256A5500685480?opendocument&node=132060_US
Best Regards,
Chris D
NI Applications Engineer

Java 7 U25 work around does not work for windows 8

I'm working on a java application which uses the statistical software R. This line Process p = Runtime.getRuntime().exec(C:\Program Files\R\R-2.15.1 + "/bin/" + "R CMD BATCH " + "./data/rJava.R"); in the application started throwing an error after the java 7 u25 update, but it was fixed by using the work around setting jdk.lang.Process.allowAmbigousCommands to true. This fix however does not work in windows 8, although the command does not error out with "cannot create process = 2" it just executes the line, but does nothing. But if I typed the command (R CMD BATCH " + "./data/rJava.R) directly into the commandline, it works perfectly. I've tried disabling the work around, and actually using suggested solutions in the release notes (see below), all worked in windows 7, but no success with windows 8. Any suggestions would be great
Process p = new ProcessBuilder("c:\\Program File\\foo.exe").start();
Process p = Runtime.getRuntime().exec(new String[] { "c:\\Program File\\foo.exe" });
Process p = Runtime.getRuntime().exec("\"c:\\Program File\\foo.exe\"");

avancentcisco - Win7 works fine with SSL VPN. But since we all were migrating to Win8, this was of no use to us. So we ditched SSL VPN all together.
IPSec VPN with Cisco VPN Client (version 5.0.07) works absolutely fine on Windows 8. Once you get the set up right, everything works fine (we are using full tunnel) including internet access.
If you struggle to get it working then let me know and I can help you out. There's not much info out there on the internet. I had to do it the hard way.

HP Mediasmart Live TV does not work on Windows 10

HP Mediasmart Live TV does not work after Windows 10 upgrade. Error says: Your TV tuner cannot be accessed because it is being used by another application. Please close any programs that might be using it and then try again. Although I am able to open the settings and scan for channels, and I see the channels being found, but still no luck watching after the setup is done. My HP Laptop has a built in HP ATSC/Analog TV Tuner card. (AVerMedia maybe?) I suspect that is may have something to do with the fact that the driver does capture at the same time you are watching (Allows you to pause and then continue watching live TV, also has the ability to scedule recordings) Unfortunatly Windows 10 also removes Windows Media Center, so I can't check with that software, is also possible a remnant may be left behind to support Windows Media Center that is conflicting with something else. Also would be nice if they would fix the installers so it does not uninstall the software, then fail to re-install it. (All without any display or error messages, so your left scratching your head trying to figure out what happened.) I managed to get the rest of MediaSmart to work, although it looks like the internet veiwer may not connect to anything anymore. Looking for an updated driver or installer, or patch that would work for Windows 10. As far as I can tell on the internet HP MediaSmart Live TV is supposed to work on Windows 10.

OK, More information. Installed Media Portal 1. This works with the tuner card without additional modification, so this appears to be some kind of issue with the software. Media Portal 1 does install a different version of Direct X, I don't know if that could have anything to do with it, but HP MediaSmart Live TV still comes up with the same error and will not run.

Application not working without restart the blackberry

Dear All, when i get connected through WiFi , the only app working is the browser and the reset of the applications not working , and after restarting the blackberry phone every thing working fine for just 24 hours then it come back down again and i need to restart again , so could any one help

mohammedzico1 wrote:
the only app working is the browser and the reset of the applications not working , a
Specifically, what other applications are not working? Name them.
Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider? You must, in order to get the RIM push email functions you are looking for, as well as additional BlackBerry data services such as the internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
is the deployment server.
I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
Message:There is an error in XML document (1, 331491).
Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
Please provide suggestions on this I need to resolve this ASAP.

Hi,
This question is better asked here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
Experts here are more familiar about it and they can give you more efficient suggestion.
Thank you.

Application not working in windows 8

Similar Messages

Maybe you are looking for