Application of Oracle CEP that you had did

I am a newbie of the Oracle CEP，and have no idea of how to use the Oracle CEP to develop an application.I want to know what project had the net friends has did,if possibility,could you share the experience with me?Thank you for your reading,and thank you for you sharing .
Edited by: 924668 on 2012-3-31 上午1:28

Have you installed OCEP and setup the plugin in eclipse ? http://www.oracle.com/technetwork/middleware/complex-event-processing/documentation/index.html I hope this link will help you with getting started.

Similar Messages

Oracle recommends that you revoke EXECUTE privileges on powerful packages f

Oracle recommends that you revoke EXECUTE privileges on powerful packages from PUBLIC
Got on error on the home page of Enterprise Manager and read that I should run the code below to correct the problem, but when I click on the link at the bottom of EM to go to iSQL*Plus and choose to connect as sysdba I get a popup asking for me to input a password for my computer so I tried my local computer username and password, my network username and password and even my database username and password and neither lets me in. I can login under Normal but then I do not have rights to execute the command.
revoke execute on utl_file from public;
I know I have my computer username and password correct because I had to enter it to shutdown the database yesterday.
And I had a problem with my listener not knowing the SID, but the error has since went away, but I do have an error on my listener saying
Disk Utilization for 0 C: is 151.45%
Edited by: jamesH2 on Aug 29, 2008 9:20 AM

Hi James,
Where you saw that Oracle recommend that? If you are refering to the Db console recomendations please take a look on this note also: Note:343620.1
If you revoke any privilege from PUBLIC it becomes your own responsibility
to ascertain that all your applications will keep working. The same goal can often be accomplished
by replacing the privileges formerly granted to PUBLIC to some individual users or
roles.
Please take a look on this Metalink Note: 247093.1 Be Cautious When Revoking Privileges Granted to PUBLIC
Regards,
Francisco Munoz Alvarez
www.oraclenz.com
Edited by: F. Munoz Alvarez on Aug 30, 2008 1:31 AM

HT1414 i had my boyfriend hook up and activate my new iphone, unaware that you had to put in many bits of imformation, like your email and whatnot to create an apple account. Well, everything worked fine and i thought nothing of it untill now after him an

...and so everything was working fine and dandy untill I ran into this small problem. My significangt other and I had a falling out and are no longer speaking to one another. He has a little bit different way of thinking than I do and was very controlling throughout our relationship. My iphone stopped working the other day and I found out that it apparently had been reported stolen. I was dumbfounded and I knew there had been a mistake but after i was given the instructions of what needed to be done to clear this up, this is where the problems began. I needed to get back into my device and was asked for my icloud account information. I wasnt real sure what it would be seeing as though i wasnt aware that i had one. i knew i had an email and of course i knew the password however that did not seem to work. i believe that what has happened is all kind of part of his controlling ways and that when he activated my phone for me he used all of his own information in case of a situation like this. He knows how badly he is getting to me right now with this and he knows i am unable to use my phone. he must have also been the one who reported it stolen knowing that he is also the one who knows how to reactivate it when it asks for what information it needs to do that. So for the moment, i am completely locked out of my own phone and can do nothing. i am livid with this whole thing and am getting more and more frustrated as i try to get this resolved. i need some help as to how i can start from scratch like it was when i brought it home from the store except this time i will do it all myself and put in my own personal information, no one elses so i NEVER run into anything similiar to this again. what do i do?

Sorry, without knowing the Apple ID/Password that was originally used to activate this phone, then there is no way to re-activate it, as you've found out.
Apple can't/won't help you. Your choice is to get this info, or you simply won't be able to re-activate this phone.
If you ex won't give it to you, then consult a lawyer.

I have just installed Firefox 6, and Rapport no longer works - the same problem that you had with Firefox 5. What is happening?

You prompted me to install Firefox 6 this evening, as it addresses serious security/stability problems, but when I did this, the Rapport icon vanished from the address bar. Reinstalling the current version of Rapport has not fixed this.
The same thing happened a few months ago with Firefox 5, and it took Rapport a week to develop a new compatible version.
Why has this happened again? Do you not check this before launching new versions? Or, why at the very least do you not warn us beforehand that some programs will not work for X days? I'd prefer to be without the latest Firefox for a week or so rather than without Rapport - not least because my bank requires me to use Rapport.
Please advise ASAP.
Malcolm Oliver

This is the link in the message that Trusteer has sent me today. I have updated and works fine thus far.
Thank you for contacting Trusteer Technical Support.
We are glad to inform you that a version of Rapport which supports Firefox 6 has
been released and is now available for download in the following link:
http://download.trusteer.com/NkuiAcruiKc/RapportSetup.exe
Please make sure to restart your computer after the installation process is
completed.
Please note: This version of Rapport is currently a beta version. We would
appreciate any feedback you may have regarding this version.
If Rapport states that the version of Rapport you are trying to install is older
than the version already installed, please follow these instructions:
1. Choose to uninstall Rapport
2. When prompted, select "Delete all user settings". Please be assisted by the
following image: http://consumers.trusteer.com/files/images/uninstall.jpg
3. Reinstall Rapport from the link above.

Why does Apple have to make updates every month, outdating any games or any software that you had?

I am frustrated because I just bought a new game and it would be really fun if Apple didn't make Lion, outdating the game, just so I could use "the App Store." They advertise it as being everything, but my computer is old so I CAN'T use the magnificent trackpad stuff and all that. All I get is the App store, some new desktop pics, and no compatibility with anything, which, I feel, doesn't make sense? Can anyone answer why they have to do this to a loyal customer?

One of the solutions to the problem of having either (1) an older OS which will run some of my favorite apps, and (2) having an up-to-date OS which can't run some of my favorite apps but which does allow me access to various new-fangled things like iCloud, is to...
...have both.
Partition your hard drive, or use a bootable external hard drive (or both). Have different OS versions on different volumes, and boot into them as needed.
Example -
Snow Leopard (OS X 10.6) will run PPC apps, such as AppleWorks and Diablo II. When I want to use those, I boot using the partition on which I have 10.6.8.
When I want to use iCloud features, etc., I boot using a partition on which I have Lion.

HT201407 When I did the latest update, my phone was wiped out completely. My laptop that I had everything on, crashed. I have a new laptop, tried to update on it and of course i couldn't without deauthorizing my account then reauthorizing. I need help!

When I did the latest update, my phone was wiped out completely. My laptop that I had everything on, crashed. I have a new laptop, tried to update on it and of course I couldn't without deauthorizing my account then reauthorizing. I need help! I want my ringtones and picturesd back, and can't get them. Does anyone know how to do this given my situation?
Thanks!

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

I recently installed MacKeeper on my iMac. It was a disaster. I lost applications and files. Fortunately I had back up. Worst of all it did something to my system software that it takes about 7 minuts to stat-up. What can I do to get it to start-up f

Version:1.0 StartHTML:0000000186 EndHTML:0000002354 StartFragment:0000001670 EndFragment:0000002318 SourceURL:file:///Users/armandodiaz/Desktop/I%20recently%20installed%20MacK.doc
I recently installed MacKeeper on my iMac. It was a disaster. I lost applications and files. Fortunately I had back up. Worst of all it did something to my system software that it takes about 7 minuts to stat-up. What can I do to get it to start-up faster?
Thanks

How to Remove MacKeeper
Given you have a backup you may want to think about erasing the hard drive and reinstalling Snow Leopard then restore your backup.

My itunes id is blocked by apple because of an internal problem trying to update the itunes version, apple support is not helping at all and I need to update all my application. Is anybody you had this problem before? and how did they help? thanks

my itunes id is blocked by apple because of an internal problem trying to update the itunes version, apple support is not helping at all and I need to update all my application. Is anybody you had this problem before? and how did they help? thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Went to watch a video on You Tube that I have watched before on my iMac and got the prompt that I had to upload Adobe Flash Player. Did that, and am still getting the same prompt and can't watch any videos at all. What is going on here, Apple??

Went to watch a video on You Tube that I have watched before on my iMac and got the prompt that I had to upload Adobe Flash Player. Did that, and am still getting the same prompt and can't watch any videos at all. What is going on here, Apple??

I do not know how to do this with an Apple TV (I don't have one), but as far as I know Apple TV only does mirroring.
If you have an HDMI cable long enough to reach your TV from where you sit, then it's easy. The TV could be set up in Extended Desktop mode (mirroring off) as if it was simply another computer monitor, and then you could just drag windows to it. If you have the Displays icon in your menu bar, that's where the setting is, or if the icon is not there, then the setting is in the Displays system preference. But again, that's for conventionally connected monitors, not Apple TV. If you don't have an HDMI cable and wanted a long one that's affordable you can get those at monoprice.com.
The answer we are still waiting for is if anyone knows if Apple TV can be used in extended desktop (non-mirroring) mode.

I have an iphone 5s and i just got the 7.0.4 update. Now i don't have the option to have a fingerprint scanner. Has anyone had this same problem? If so, why is that and what did you do about it?

I have an iphone 5s and i just got the 7.0.4 update. Now i don't have the option to have a fingerprint scanner. Has anyone had this same problem? If so, why is that and what did you do about it?

I have an iphone 5s and i just got the 7.0.4 update. Now i don't have the option to have a fingerprint scanner. Has anyone had this same problem? If so, why is that and what did you do about it?

This installation package could not be opened, verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package

I have tried and tried to install itunes on my mums zoostorm windows 7 64-bit pc and it comes up with this message "this installation package could not be opened, verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package" i have tried everything that i have been told to do and nothing has worked but then i try to install it on her toshiba satellite pro windows 7 32-bit as she reset it back to factor settings she has done ALL updates she had itunes on her laptop before but when we went to install it back on the laptop it cam up with the same message as it did on the pc i would really like it if someone can please help with this problem as i am getting so annoyed with it. I have a zoostorm windos 7 32-bit laptop and i have reset that bk to factory settings and i installed itunes on there with no problems so a soultion would be really great.
Many thanks Donna

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

The Web application at could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application

Hi,
I have created on windows service to fetch sharepoint list ad update the list items.
when i run this service in sharepoint server(where the sharepoint site is hosted),it is working fine. If i run the same service in another machine(sharepoint installed in this machine also). it is giving the below error
The Web application at [URL] could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application.
Code snippet
SPSite sharepointSite = null;
            SPWeb rootWeb = null;
            try
                //SPList current = null, previous = null;
                string colmId = ConfigurationManager.AppSettings[ID_COLM];
                List<TaskEntity> list = new List<TaskEntity>();
                sharepointSite = new SPSite(URL);
                rootWeb = sharepointSite.OpenWeb();
                SPList current = rootWeb.Lists[ConfigurationManager.AppSettings[OMEGA_REGISTRATION_LIST]];
                WriteEventLog("current" + current.Items.Count.ToString());
            catch (Exception ex)
                ExceptionMethod(ex);
            finally
                sharepointSite = null;
                rootWeb = null;
I have pointed .net framework to 3.5 version and target palform as Any CPU. Please suggest me

Hi mallela1,
I also had similar issue couple of months back when I was trying to access a remote URL from a Windows service when the site does not exists in the server where service resides.
You cannot access a remote url (even though it is SharePoint server and also in same network ) from server object model.
SPSite can look in the current server only. here what is happening is SPSite will look for this in the current server DB and it is not finding this errror.
So please dont use ServerObject model for accessing remote sites. You can use Client Object model for the code /requirement you have stated above.
I wasted lot of time in finding a work around to make to work. It did not. So look for other options.
Regards,
Nandini

I just tranfer all my photo from my Mac though itune to my iPhone so I can setup Mac back to factory setting after doing I try to put my photo vac to my Mac I photo did not detect any of the photo that I had tranfer from itune it only detectPLAESE HELP!

I just tranfer all my photo from my Mac from itune to my Iphone so I can setup Mac back to factory setting after I don't with that, I try to put my photo back to my Mac and Iphoto did not detect any of the photo that I had tranfer from itune it only detect the one rhat i took with the Iphone PLAESE HELP!!!!!!

Hello Partii,
It sounds like you may use a POP account for your email. With a POP account, email applications like Mail and Outlook can remove emails from the server, so when another device tries to check the server for new emails, it doesn't see any.
You may need to adjust settings in Outlook so that the emails are not removed from the server when downloaded. I found an article with more information:
When using a POP email account with multiple devices, email messages may only appear on the first device that receives them. This occurs when an email client is configured to automatically remove email from the server once an email client has received it. You can configure your email client (or clients) either to keep a copy of the email on the server, remove it after a certain number of days have passed, or keep it until you move it from your Inbox.
I recommend reviewing the full article for steps on adjusting these settings; you can find the full article here:
Using a POP account with multiple devices
http://support.apple.com/kb/HT3228
Thank you for using Apple Support Communities.
Best,
Sheila M.

Does anyone know how to get an application you had once without using App Store?

Does anyone know how to get an application you had once without using App Store?
Because I'm underage and I couldn't get it back.
I just want it back, I'm not going to use any money in App Store...

When you say you "had it once", how did you get it then? The App Store has only been around for a few years, so there are lots of apps out there that you would once get from the developer, but now they're only available on the App store. Which app(s) are you referring to?

Application of Oracle CEP that you had did

Similar Messages

Maybe you are looking for