Application Path Member will be deleted after adding a new Application Path Member in another Application Path List

I expirienced the behaviour that the first item in the Application Path Member from a Application Path List will be deleted as far as the first item in the Application Path Member List will be selected in anather Application Path List without saving. This is according to severals peripherals as well.
Example:
Configuration Manager > Application Path List
In the Application Path List "McalMediaRouting" the following Application Path Members are configured.
For this example, the first Media Routing Domain for the Peripheral is Chat.
Now, adding a new Application Path Member for the Application Path List "SiebelMediaRouting" with a new Media Routing Domain, which is not yet assigned to a Application Path List.
Select the same Peripheral PG1A_CCM and choose the new MediaRouting from the list. At this point the Application Path Memeber with the Media Routing Domain "Chat" will be deleted in the Application Path List "McalMediaRouting". This will be deleted even without saving it.
UCCE Version 9.0.2 used.
Is this per design or is this a defect?
Kind regards
David

HI
add that fileds in the all locations where you need it like
in internal table declaration , write statement , select statement
these are the main areas where you have to add that 2 fileds

Similar Messages

What is the expected behavior in a zone after adding a new static route in Solaris 10....

Hi Folks,
I have a few Solaris 10 production machines here at work and had a strange thing happen. I added a new route to these machines using the "add route <destination > <gateway>" command and my web applications running in the zones on these machines froze up. The applications that froze had no reason to do this as they have never talked to the machine in this new route. Here is the old route table via netstat -rn:
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
172.23.248.0 172.23.248.24 U 1 6794 bge1
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.74 U 1 7980 bge0
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 34
172.28.0.0 172.23.248.100 UG 1 9
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 44
172.26.0.0 172.23.248.100 UG 1 934
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 82
172.23.0.0 172.23.248.100 UG 1 161975
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 82
10.0.0.0 172.23.248.100 UG 1 1766
224.0.0.0 204.154.129.74 U 1 0 bge0
default 204.154.129.1 UG 1 8411
127.0.0.1 127.0.0.1 UH 225713773 lo0
Here is the route table after I added my one additional route (note the top line):
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
204.154.129.209 172.23.248.100 UGH 1 5
172.23.248.0 172.23.248.28 U 1 5757 bge1:3
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.86 U 1 484 bge0:2
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 114
172.28.0.0 172.23.248.100 UG 1 2
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 43
172.26.0.0 172.23.248.100 UG 1 944
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 77
172.23.0.0 172.23.248.100 UG 1 160823
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 0
10.0.0.0 172.23.248.100 UG 1 183
224.0.0.0 204.154.129.86 U 1 0 bge0:2
default 204.154.129.1 UG 1 1850
127.0.0.1 127.0.0.1 UH 58 225894 lo0:3
My question is why did my application die and need to be restarted after this one simple route was added? What is the expected behavior in a zone after adding a new route to the root zone?
Thanks,
Tom Gellert
tom.gellert@tellabs.com

Greg- Dreamweaver CS4/Live View integration with BrowserLab allows you to send interactive states of a local site/design directly to BrowserLab (dynamic data, rollover/mouse interaction states, widget states, et al), and from behind firewalls no less- definitely a scenario we covered. You can get the extensions (which require Dreamweaver CS4, of course) up on the Labs site: http://labs.adobe.com/technologies/browserlab/

If I restored my new iPhone from iCloud backup, and I delete the old iPhone backup to make room on iCloud to back up my new phone, will it delete everything on the new phone?

If I restored my new iPhone from iCloud backup, and I delete the old iPhone backup to make room on iCloud to back up my new phone, will it delete everything on the new phone?

I have this exact same issue. Replaced my iPhone 4s with the new iPhone 5s, setting up my new iPhone 5s to restore from iCloud. This completed and now I am unable to delete my old iPhone 4s iCloud backup (consuming 15.1 GB of my 20GB allocation). How can I delete it, so that I get my 15 GB back? I am not going to invest in additional iCloud storage, because I will be 15 GB down from the off.

HT1766 If I restore my new iphone from my last backup will it delete all of the new things that i have on my phone

If i restore my new iphone from my last backup will it delete all of the new content that I currently have on my phone? would it be better off to set it up as a new iphone? and if i set it up as a new iphone what will that do?

If you restore from your last backup, it will replace what you now have on your phone. If you set it up as new, you will have a phone just out of the box without any of your data on it. You can download any apps again. You can sync your music through iTunes.

WINDOWS 8.1 - System Tools no longer displaying User and Group Settings after adding a new LOCAL user.

I jumped on my parents computer, which is on a domain. I added a new local user(with my live.com login) and gave it admin status. That's when the trouble began.
The main user profile disappeared. I used the command prompt fix (see other fixes) to add the missing user back into admin. I logged back in, and it set up the account for the first time (WTF?). I cannot access any files from the main account
(that I logged into just fine before to get this debacle started.)
When going to Local Computer Management --> System Tools, my users and groups tool is missing.
I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1. To manage user accounts for this computer, use the User Accounts tool in the
Control Panel." <---- Awesome! (that was sarcasm.)
I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".
To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again. I wouldn't recommend reinstalling 8.1,
I would say go back to 7 and wait until 10 comes out. Windows 8 is the new Vista. Good luck!

Hello AhavahOlam,
I can understand your feelings.
If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Logical standby issue after adding a new user at production db server

Hello Experts,
I am facing a issue related to logical standby db server where after adding a new user at production db server logical standby has stopped sql apply. Can anybody give some idea to find out the root cause and give some tips to resolve the issue.
tried below .....
SELECT EVENT_TIME, STATUS, EVENT FROM DBA_LOGSTDBY_EVENTS
ORDER BY EVENT_TIMESTAMP, COMMIT_SCN, CURRENT_SCN;
got error
ORA-16227: DDL skipped due to missing object
ORA-01403: no data found
ORA-00942: table or view does not exist
OS : RHEL 4 (IBM P5)
DB : Oracle 10g (10.2.0.1)
Achyot

Please let me know if can skip the DDL at which it is failing.
ALTER DATABASE STOP LOGICAL STANDBY APPLY;
Use EXECUTE DBMS_LOGSTDBY.SKIP
ALTER DATABASE START LOGICAL STANDBY APPLY;
Thanks,
Renu

.xml get disformatted after adding a new Element

Dear friends!
I have a xml file when i add a new element to this its formatting
get destroyrd. Plz help me to keep them in proper shape.
before adding:
<person>
<name>xyz</name>
</person>
after adding a new name element:
<person><name>xyz</name> <name>new 1</name><person>

ok, so using JAXP (which is embedded in JDK 1.4 so if you use this JDK no need to add anything on your classpath).
0. few imports
import org.w3c.dom.*;
import javax.xml.parsers.*;
import javax.xml.transform.*;
import javax.xml.transform.dom.*;
import javax.xml.transform.stream.*;1.load the XML file in a DOM:
Document doc = DocumentBuilderFactory.newInstance().newDocumentBuilder().parse("c:/data/myxmlfile.xml");2. manipulate the DOM, see:
http://java.sun.com/webservices/docs/1.0/tutorial/doc/JAXPDOM7.html#65002
3. save the DOM:
Transformer transformer = TransformerFactory.newInstance().newTransformer();
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "1");
transformer.transform(new DOMSource(doc), new StreamResult(new FileOutputStream("c:/data/myxmlfile.xml")));hope it helps.

If I delete iCloud from iPhone 4 phone will this delete everything from my new upgraded iphone 5 ?

If I delete iCloud from iPhone 4 phone will this delete everything from my new upgraded iphone 5 ?

No. You can delete your iCloud account from your iPhone 4 and the information will remain in iCloud either through syncing or through a backup.or through both features. Just make sure you have a recent backup.

Master data to be deleted after adding attribute

Hii All,
I have a master data info object, which contains the data.what will happen if i add new attribute to this master data info object.
right now this master data info object doesn't contain any data for this newly added attribute.
then i tried to delete data from the master data info object.but it is not allowing me to do so as it is used in three info cubes. i think if i delete the data then it will allow me to delete data from master data info object.But that is not possible as subsequently i have to delete the data from info cube in productio also.
So ran full update for the master data info object now i have the data for the newly added attribute.But when i am running report and try to drill down on the newly added characteristic it shows "#" not assigned.
What should i do..
pls help..
Regards,
Viren

Hi Rana
1. I have a master data info object, which contains the data.what will happen if i add new attribute to this master data info object.
Nothing will happen if you add a new attribute to the existing one. If your adding in the dev system, it will as you to create a request when you activate it.Just create a request the transport it.
2.But that is not possible as subsequently i have to delete the data from info cube in productio also.
You can delete the data in the dev system cube irrespective of production server cube data. If you delete the cube then you have to worry but deleting the data from the cube is not to worry. You can go ahead with deleting the data in the cube in dev server.
3.So ran full update for the master data info object now i have the data for the newly added attribute.But when i am running report and try to drill down on the newly added characteristic it shows "#" not assigned.
AFter loading the data . right click on the master data object and clik on Activate masster data or RUn apply hierarchy attribute change in Tools menu.
Hope this helps
Ram

Will not boot after adding RAM?

I just added another 512mb chip to my PB G4 upper slot. After adding the RAM, my PB will not boot/ load the OS. When I press the power button, the HD (i think) begins to run, but stops after about 2 seconds. I can't get it to do anything else. Please help.

Have you taken the new RAM stick out yet?
Powerbooks can pretty picky when it comes to RAM.
Joe

Unexpected error durung process after adding a new measure group

I add a new measure group with distinct count in my cube
I process my cube then I have:
Erreur interne : Une erreur inattendue s'est produite. Erreurs dans le moteur de stockage OLAP : Une erreur s'est produite lors du traitement de la partition 'Requirement' du groupe de mesures 'Formalized 1' pour le cube 'Requirements_view' à partir de la
base de données SeikoCube. (internal error : unexpected error happens ... An error occured when processing the partition for measure group for the cube)
If I delete this measure, it works well.
Whap happens ? How could I resolve it ?
Thanks in advance

Hi Fiacre663,
According to your description, you encounter the error while processing the cube after added the distinct count to cube, right? In your scenario, which process option are you used to process the cube?
Generally, if you add a measure you are changing the structure of the cube which will invalidate the cube, the easiest way to get the cube "fully operational" again would be to do a ProcessFull. The same thing applies when removing a measure.
Besides, please ensure that the steps to add distinct count are correct. There are different options for creating a distinct count measure in SSAS. Please refer to the link below to see the details.
http://www.mssqltips.com/sqlservertip/3043/different-options-for-creating-a-distinct-count-measure-in-ssas/
Regards,
Charlie Liao
TechNet Community Support

IdeaPad S205: BIOS/EFI menu not accessible after adding a new boot entry using the bcfg command

Hi community,
I just got a new S205 and wanted to install Win7 and archlinux in dual boot (GPT formatted SSD).
Win7 installation worked like a charm. Archlinux worked well aswell, unfortunately i couldn't make a boot entry following this guide: https://wiki.archlinux.org/index.php/Beginners%27_Guide#EFISTUB
So i had to manually create the boot entry using bcfg command in an efi shell:
https://wiki.archlinux.org/index.php/Unified_Extensible_Firmware_Interface#bcfg
The first attempt (I double checked that i got the right filesystem [fs0] and so on) failed and resulted in an automatic reboot. After this I immediately reentered the efi shell and tried again. This time I could create the boot entry.
Now if I reboot everything seems fine (I can dual boot Win and arch) BUT I cannot access BIOS/EFI menu via F2 anymore. It seems like it just does not exist anymore. How do I get it back? Should I just flash over with the original EFI from the Lenovo download page? I could theoretically do that (I can still change boot order using my arch live medium), but i could not reset EFI prior to flashing... which is always recommended to do.
So I am - again - pretty stuck with this EFI. I hope you can help and tell me what to do.
This EFI-Implementation on the S205 must be the worst piece of "engineering" ever.
Nothing works the way it is intended to... I would not dare to wash my hands clean off any faults, but ADDING a boot entry resulting in a not accessible BIOS/EFI menu... there's just something wrong.

At least I now know what the problem is:
It seems like the S205 can only keep 7 boot entries in NVRAM (Can anybody concern?).
As I already have 7 boot entries:
adding a new entry using efibootmgr tool does not work (fails without error) and gummiboot doesn't work either. Nevertheless, adding a boot entry (for rEFInd) from within the UEFI shell works, but seems to result in deleting "Boot0000" aka Setup which then breaks my EFI. Breaking meaning that I cannot access it anymore.
I can however (and did so twice yesterday) flash the original EFI from within Windows and thus gain access to the EFI menu again. Nevertheless this resets my boot entries again so the refind (or gummiboot) bootloader gets deleted again and only Win7 is bootable.
Now what would be the smartest way to dual boot this system? Which of the boot entries is safe to delete so i could install refind/gummiboot instead? For instance, I don't know where USB FDD and USB CD come from. Can I delete them? Or won't I be able to boot from external CD-ROM or USB drive anymore if I delete them?
Or would it be best to delete the Win7 bootloader and try to have refind/gummiboot boot it? And will they at all be able to still find the Win7 boot files once I deleted Win7's boot entry? When I install refind as bootloader and manually add an boot entry for it using the bcfg boot add command it is able to load Windows7. But will this still be possible if I delete the Win7 boot entry? It would most likely be possible - I assume - if the Win7 boot files (on the EFI system partition) were still there even after deleting the boot entry. Can someone tell me how deleting a boot entry exactly works and which files get or don't get deleted?
Best regards.

Issues with Writing back data to Planning Cube After adding a new characterstic

Hello,
We have two cubes and a MP on top of it. ( Reporting Cube and Planning Cube ). An aggregation layer has also been built and so does a planning BEx query on top of it.
Before Scenario: things were working fine as we were able to write back data to planning cube using the BEx.
After Scenario: We created a new Dimension in the planning cube and added a new characteristic ( lets call it ZX_KEY ) . This Characteristic holds the concatenated values of some of the other characteristics in its master data tables . ( For ex: Account_Customer ID_Country-code_Industry-code ).
This new characteristic is also present in the reporting cube and has been added and transferred to MP.
This new characterstic was added to the planning BEx query as one of the rows and we executed it the analyzer. After entering the required values for all characterstics ( including the newly added ZX_KEY ) and the key figure values, we tried saving it. Now this is where the Analyzer is throwing up this error..
~~Characterstic combination cannot be assigned to part provider ~~
~~Characterstic 'ZX_KEY'; Characterstic value 'R123000000_12_US_TX'~~
~~ Entered values are incorrect:Correct before navigation ~~
The value that we are entering ( R123000000_12_US_TX ) is picked up from the master data table of ZX_KEY by double clicking and selecting it from the fetched values. So i am not sure as to why its throwing up the above error. Request your help on this please.
regards,
Karthik

Hi,
Try to check that all characteristics are correctly assigned at multiprovider level.
hope it helps

Serialization Error after adding a new field to BPM Process

Hi,
I have a BPM Process to which I added a new attribute userid and consuming the BPM process in a web dynpro application, I created a model using the BPM Process's Web Service but getting a serialization error that the model does not have a mandatory field with name [userid]. see below.
FYI.. I can trigger my BPM process through the Web Service in wsnavigator , the error I am getting is while executing the BPM Process from the custom webdynpro.
Any idea how to resolve the issue?
XML Serialization Error. GenericObject [
<modelObject class="com.sap.demo.wdpoc.wd.models.model.NewOperation"><attribute name="In" value="KK"/><attribute name="Name" value="133"/><attribute name="Age" value="dad"/><attribute name="Designation" value="12124"/><attribute name="Userid" value="null"/></modelObject>
] does not have a mandatory field with name [userid].
[EXCEPTION]
com.sap.engine.services.webservices.jaxrpc.exceptions.XmlMarshalException: XML Serialization Error. GenericObject [
<modelObject class="com.sap.demo.wdpoc.wd.models.model.NewOperation"><attribute name="In" value="KK"/><attribute name="Name" value="133"/><attribute name="Age" value="dad"/><attribute name="Designation" value="12124"/><attribute name="Userid" value="null"/></modelObject>
] does not have a mandatory field with name [userid].
at com.sap.engine.services.webservices.jaxrpc.encoding.SerializationUtil.serializeGenericFieldContent(SerializationUtil.java:1546)
at com.sap.engine.services.webservices.jaxrpc.encoding.SerializationUtil.serializeGenericFields(SerializationUtil.java:1431)
at com.sap.engine.services.webservices.jaxrpc.encoding.SerializationUtil.serializeGenericType(SerializationUtil.java:1383)
at com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType.serialize(GeneratedComplexType.java:168)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.serializeParameter(SOAPTransportBinding.java:1731)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.serializeRequest(SOAPTransportBinding.java:1683)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.writeSOAPRequestMessage(SOAPTransportBinding.java:254)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call_SOAP(SOAPTransportBinding.java:1272)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.callWOLogging(SOAPTransportBinding.java:952)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call(SOAPTransportBinding.java:907)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DInterfaceInvokerImpl.invokeOperation(DInterfaceInvokerImpl.java:76)
at com.sap.tc.webdynpro.model.webservice.model.WSGenericModelClassExecutable.execute(WSGenericModelClassExecutable.java:73)
at com.sap.tc.webdynpro.model.webservice.gci.WSTypedModelClassExecutable.execute(WSTypedModelClassExecutable.java:49)
at com.sap.demo.wdpoc.wd.comp.wdpoc.Wdpoc.execute(Wdpoc.java:257)

This question is not answered but I am marking it answered because I have to post more.
Sorry
-Ashwani

Sequence of items in 'to do' list now abritary after adding a new calender

Hi I doubt there is a fix for this but I would like to understand the problem.
I added a new calender (on the left, in a new color) and my to do list is now scrambled. The sequence of items was important, they were grouped, and now they seem to be in a random order. I'm not using priorities.
WHY?! : )
Perhaps now is a good time to switch to a competitor?
Any thoughts?
Thanks
Matt

For some reason the actual Task in the process is not being completed. If you see the same Task ID then you are probably still looking at the same actual Task because if a new Task was created, it would still get a new ID incrementing in value. What happens when you select the green check mark in the Task card in Workspace (rather than complete from the form view). If this works then perhaps there is something wrong with the submit button on your form. Also, what version of Reader are you using?

Application Path Member will be deleted after adding a new Application Path Member in another Application Path List

Similar Messages

Maybe you are looking for