Application popup: cmd.exe - Application Error
Hi,
Daily ILM batch will execute after completion i am connecting the server using RADMIN, while connectng i am getting the below error.
Application popup: cmd.exe - Application Error : The application failed to initialize properly (0xc0000142). Click on OK to terminate the application.
Please let me know how to clear this error.
jaya
Hello,
See this blog-post;
http://blogs.technet.com/b/gladiatormsft/archive/2013/06/11/app-v-5-0-on-these-0xc0000142-errors-and-where-they-are-coming-from.aspx
Nicke Källén | The Knack| Twitter:
@Znackattack
Similar Messages
-
Cmd.exe application error
We have been receiving the following error message since we purchased our Satellite E105-S1602 last month: cmd.exe application error the application failed to initialize properly (Oxc0000142). Click OK to terminate. Any ideas as to how we can remedy this recurring error?
Satellite E105-S1602
cmd.exe application error the application failed to initialize properly (Oxc0000142). Click OK to terminate.
Judging from similar experiences reported on the web, you must be trying to open a command prompt when the message occurs. Is that correct?
If not, what are you doing? Booting Windows? Trying to run an application?
-Jerry -
IIS Crash because of a Application Popup w3wp.exe
We have a report system that runs on a Win2003 Server with Crystal Reports for .NET Framewokr 4.0. We installed the Crystal Runtime 13.0.
Now, every 5 hours the IIS server crash. At the time of the crash we have the following Event in the Event Viewer:
Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Description:
Application popup: w3wp.exe - Unable To Locate component: This application has failed to start because SmAgentAPI.dll was not found. Reinstalling the application may fix this Problem.
After a restart of the IIS Service, everthing works fine for another about 5 hours.
Does anyone have a clue for me?Hello,
What is happening is IIS is running out of memory and the error is popping up in one of our dll's. I don't believe it is the actual cause, CR just can't load any more dll's and that's the one when the system resources run out.
Make sure you are closing and disposing of you report objects when they are done with and using/adding GC.Collect to tell Windows to free up it's freed memory also helps.
To get more info you may need to add logging to your app as well as adding try/catch around every functions and write the catch to a log file to get more info and to help follow the flow.
Thank you
Don -
Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.3.1.55
Application Timestamp: 4deec351
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7ba58
Exception Code: c0000005
Exception Offset: 0002e3fb
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button. -
i m using window vista32 after itunes upgrade.. itunes crash ..
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 11.1.4.62
Application Timestamp: 52ddbf7a
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549bdc9
Exception Code: c0000005
Exception Offset: 00062086
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 16393
Additional Information 1: a183
Additional Information 2: 96f68295953afa2675d1551e001cfa2f
Additional Information 3: 5630
Additional Information 4: 5482da5e28e2dc79b1d40bd90d8c9bFault Module Name: ntdll.dll
Fault Module Version: 6.0.6000.16386
Even if you don't have any third-party plug-ins or add-ons, try opening iTunes in safe mode as per the instructions in the following document:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
If iTunes opens in safe mode, quit iTunes and then try launching it again normally. Does it launch without the error messages this time? -
Error "Please wait while the application opens: BlackBerryLink.exe - Application Error"
After several installations, disinstalls and reinstallations I am completely unable to use BlackBerryLink on my Windows7 PC: The error message provided immediately after launch of BlackBerryLink is with the title
"Please wait while the application opens: BlackBerryLink.exe - Application Error"
with detailed message:
"The exception unknown software exception (0xe0434352) occurred in the application at location 0x75cf812f."
Please provide any advice! My brand new Blackberry Z10 like this is only useful at 50% (since the encrypted SD card is not recognizeable as a normal SD card by my PC), and I would prefer not being forced to byuy other smartphones...
thanks for any advice
KnutHi Kodee,
1) Are using error handling in your code? Are you getting any errors?
2) What version of LabVIEW are you using? If you are using 8.0 or newer, then you can build a debuggable executable:
Debugging Applications and Shared Libraries
http://zone.ni.com/reference/en-XX/help/371361A-01/lvhowto/debug_apps_dlls/
Regards,
Elizabeth S.
Applications Engineer
National Instruments -
Problem signature:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 11.0.1.12
Application Timestamp: 50c8fc7e
Fault Module Name: QuickTime.qts_unloaded
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4ea5d609
Exception Offset: 653f1040
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789I am encountering the same thing as I am trying to restore my iPhone. How to fix this? I tried repairing iTunes. Still having the issue.
-
ITunes app crashed after startup with following errors.
Problem signature:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 11.0.1.12
Application Timestamp: 50c8fc7e
Fault Module Name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 00000000
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Any ideas, tried reinstalling ITunes, no change.I am encountering the same thing as I am trying to restore my iPhone. How to fix this? I tried repairing iTunes. Still having the issue.
-
hi tryed reistalling itunes drivers repairing itunes etc any help would be greatly apreciated thankyou..
Problem Event Name:
APPCRASH
Application Name:
iTunes.exe
Application Version:
11.0.1.12
Application Timestamp:
50c8fc7e
Fault Module Name:
MSVCR80.dll
Fault Module Version:
8.0.50727.6195
Fault Module Timestamp:
4dcddbf3
Exception Code:
c0000005
Exception Offset:
0001500a
OS Version:
6.0.6002.2.2.0.768.3
Locale ID:
1033
Additional Information 1:
fd00
Additional Information 2:
ea6f5fe8924aaa756324d57f87834160
Additional Information 3:
fd00
Additional Information 4:
ea6f5fe8924aaa756324d57f87834160Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message -
Stops responding, etc
details
Problem signature:
Problem Event Name: APPCRASH
Application Name: Illustrator.exe
Application Version: 15.1.0.39
Application Timestamp: 4d76c9e3
Fault Module Name: CoolType.dll
Fault Module Version: 5.7.83.9418
Fault Module Timestamp: 4c296b69
Exception Code: c0000005
Exception Offset: 00021ae1
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 8e1b
Additional Information 2: 8e1b636bd3438ac15d03ef1549553b25
Additional Information 3: 1b31
Additional Information 4: 1b316dab8b65bf468124c367b4a50e14But I am assuming that when I make the installer, the 32-bit Run Time Engine is appened with the installer, as show below
Since from the picture you can see its including the support installers from '\Program Files (x86)\'
The application runs queries to fetch data from database in SQL server 2008, and for that I am using a Microsoft SQL Native Client 2008 R2 64 bit ( this is the only version that installs on either PC, even the one on which I developed my LV Application).
I am not using any driver, only toolkits for reports - and for that I un-checked the "Remove unused polymorphic VI instances" when making the executable, otherwise LV throws up an exception that share variable are not being included.
Yes I did reboot every time after I ran the installation.
Still getting the same error. -
Microsoft report gives details of problem:
Problem Event Name:
BEX
Application Name:
iTunes.exe
Application Version:
11.2.2.3
Application Timestamp:
5383f31a
Fault Module Name:
StackHash_0a9e
Fault Module Version:
0.0.0.0
Fault Module Timestamp:
00000000
Exception Offset:
00000008
Exception Code:
c0000005
Exception Data:
00000008
OS Version:
6.1.7601.2.1.0.768.3
Locale ID:
2057
Additional Information 1:
0a9e
Additional Information 2:
0a9e372d3b4ad19135b953a78882e789
Additional Information 3:
0a9e
Additional Information 4:
0a9e372d3b4ad19135b953a78882e789
I have tried reloading the iTunes player but same thing happens after selecting it.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
when i try to open my Itunes this Message comes up
Problem signature:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.6.3.25
Application Timestamp: 4fd16377
Fault Module Name: CRYPTUI.dll_unloaded
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4ce7b847
Exception Offset: 68221040
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 5129
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtTaken at face value, you're having trouble with a Windows operating system file there.
Perhaps try an sfc /scannow. For instructions, see the following Microsoft document:
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7 -
I have not been able to open up Lightroom on my computer for over a year now. Whenever I double click on it, this comes up - can anyone help? Problem signature: Problem Event Name:APPCRASH Application Name:lightroom.exe Application Version:3.4.1.10
First thing to try is the latest version of Lightroom (currently 5.6). If it don't crash, then problem solved - upgrade.
If Lr5 won't run on your machine, then Lr4 instead.
If both Lr5 and Lr4 crash on your machine, then at least you know it's a not a Lightroom version problem but something wonked in your system.
If you can't figure out how to resolve the crash on the system you have, then it's time for a new system (or try another converter/editor app).
PS - A few things to try:
* After re-installing new version, if that doesn't fix it, then get rid of all Lightroom-related data files (rename them so they can be restored), in case problem is in Lr data file.
* Remove all non-essential hardware in case problem is hardware/driver.
* Startup up machine with minimal software services.
* If still no go, consider updating driver software, including mainboard drivers and/or bios firmware if need be.
* Of course run all the system hardware and software diagnostics you can - problem could be failing disk or ram..
* Check system event logs for any clues.
If you don't know how to do some of these things - ask.
Do not say "you've tried everything" unless you want a lecture - there is most definitely something you haven't tried. It's like when you can't find your car keys - you haven't looked everywhere - there is somewhere you haven't looked!
PS - Has Lightroom EVER worked on your machine? what's changed since then..
Good luck,
Rob -
My itunes usnt working. I keep getting this message.
Problem signature:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.7.0.21
Application Timestamp: 504d85d9
Fault Module Name: QuickTime.qts_unloaded
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4f8f8a5b
Exception Offset: 70be1040
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: b9b5
Additional Information 2: 063aa4ebde4a7a45f8c482e6ed282861
Additional Information 3: b251
Additional Information 4: 0639314542445d4694fa87cff3be7aa4Fault Module Name: QuickTime.qts_unloaded
Fault Module Version: 0.0.0.0
Try updating your QuickTime player to the most recent version. -
Installed itunes for 64 bit windows 7 as instructed.
Installation successful, but upon opening itunes, I get this message:
Problem signature:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.3.1.55
Application Timestamp: 4deec351
Fault Module Name: MSVCR80.dll_unloaded
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4dcddbf3
Exception Offset: 72c129e1
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I've uninstalled and installed 3 times and get the same problem.
Please advise!I am encountering the same thing as I am trying to restore my iPhone. How to fix this? I tried repairing iTunes. Still having the issue.
Maybe you are looking for
-
Uploading Data from a Flat File
Hi I am trying to Upload data from a Flat File to the MDS. I have a few questions on the Process. a) XI would be the Interface, and one end would be a file adapter with the Flat File format. On the other end, which Interface should I use - ABA Busine
-
A few questions and comments about the 2010 MBP i7
Hi! I'm pretty new to owning a Mac computer and I actually always wanted one. I bought the top of the line Macbook Pro 15" i7 8GB, 500GB SSD notebook. I have a couple of questions on its usage. 1) Overheating is a big issue. Many people noticed overh
-
Payment to be done according to invoice line item
Dear SAP Friends, I require a small clarification on Payment. Please see the below screnario. 1. I have a invoice for 10000 USD, Which includes 3 lines in the details. a. Water Charge - 3000 b. Electricity Charge - 5000 c. Rent C
-
InsertHTML won't work with XML files
I am trying to create a command that writes text to an open XML file. The command I've created works fine under some circumstances but not others. It works if I open an XML file and apply the command without editing the file. If I make any edits to t
-
How to make my object to wait for server response
Hi , I need some one suggestions on thread concepts. First Let me know my scenario is fit for thread concept. is it possible then how I can reach to solution. I have scenario like I send a request to server and server is taking some time to process t