Application proposal for CO-PA DataSource in BI 7?
I am looking for the option similar to former automatic InfoObject generation. I can´t find it in BI 7.
Do I have to build all InfoObjects for my CO-PA Data Source manually in BI 7 Or is there a way to generate Infoobjects adequate to my generated CO-PA DataSource?
Regards
Shankar
Resolved the issue.
Solution:
First of all replicate the Datasource in 3.x version and this is where it will prompt with the option Application Proposal. If you continue with Application Proposal the Infoobjects for all the Value Fields will be generated automatically.
Once done, migrate the datasource from 3.x to 7.x and continue with the remaining flow.
Regards
Shankar
Similar Messages
-
Diff between content and application proposal
Hi
When i am assigning infosource to my standard datasource we have three options content,application proposal,others i know that for generic we use others but for standard business content we have content & application proposal options i think when we enhance the datasource we go for application proposal or if i am wrong plz correct me for standard datasources with no enhancement is it ok to go for content option plz confirm.
Regards,
Nikhil.Hi Pradip,
Thanks for your reply but suprisingly i got an option while assigning for few datasources in SD where i had an option to choose between content and application proposal i had this doubt at this point of time as the system gave me two options and i had to choose b/w content and application propasal offcourse others option was greyed out i choose content option while assigning the infosource is that ok or i had to go with application proposal plz clarify.
Regards,
Nikhil.
Message was edited by: nikhil sharma -
Proposal for what Spotlight should be in iOS
Here is a proposal for what Spotlight should be in iOS http://www.youtube.com/watch?v=LxICuQFzBU0
At it's core, it's a filtering system for Spotlight results. However, the system goes deeper than that; it allows for searching through all applications without launching them, a file system for iOS, a Siri-like experience from Spotlight, a way to get your information quickly in order to get back what you were doing.
Further explanation on the author's blog : http://codysan.me/ios-spotlight-overhaul/paulcb wrote:
Apple, like most companies, does not accept unsolicited ideas...
http://www.apple.com/legal/contact/
http://www.apple.com/legal/policies/ideas.html
That never entered my head, any way I can "retract" my previous statement ? -
No key field found for creation of DataSource - Classification Datasource
Hello,
While trying to create a clasiffication datasource based on 0PLANT_ATTR, when i assign a characteristic and push the DataSource button, i get the following message:
No key field found for creation of DataSource
Diagnosis
During generation of a classification or configuration DataSource, only those key fields for the object table (field "Obj.Tabelle") that are already present in the basis DataSource transferred to the extract structure. This is the case when none of the key fields of the object table were found in the structure of the basis DataSource.
System response
A DataSource cannot be created without key fields. The action was cancelled.
Procedure
Check whether you have selected the correct basis DataSource and object table. For more information, please see SAP Note 569849.
Do you know what can be the problem?
Thank you and regardsHi Alberto,
plants are a special case. The key which is used for the classification
of plants (object type BETR) is not the same as the key which is used in
datasource 0PLANT_ATTR.
BETR has key LOCNR (Site). That's a customer related to a plant. The
customer number will be extracted in field LOCNR.
0PLANT_ATTR extracts the plant in its key field WERKS.
Transaction CTBW and the generic extraction program for classifications
don't know the relationship between LOCNR and WERKS. So they cannot map
them.
I do recommend a solution which would add the mapping between
LOCNR and WERKS:
1. Create please the classification datasource as intended, but use
datasource 0RT_LOC_MGR_ATTR as basis datasource. It's the only
datasource of the content where LOCNR is a key field. So
0RT_LOC_MGR_ATTR is used as a dummy here, to allow transaction CTBW to
create the classification datasource. It's not necessary to extract
data with datasource 0RT_LOC_MGR_ATTR.
2. Extend please the extract structure of the created classification
datasource. Add please field WERKS using component type WERKS_D. Make
this field visible.
3. Fill field WERKS in the extractor user exit EXIT_SAPLRSAP_002. WERKS
can be read from table KNA1 by using the customer number extracted to
LOCNR to select on field KNA1-KUNNR.
4. Transaction CTBW_META on the BW system isn't able to append the
characteristics from the classification datasource to infosource
0PLANT, because the keys are different. So create please a new info
source with CTBW_META. This allows CTBW_META to create the info objects
for the characteristics used in the classification datasource.
5. Add please the characteristics used in the classification datasource
to infosource 0PLANT manually. You will find the info object names of
the characteristics by looking up the characteristic datasources which
are assigned to the classification datasource in transaction CTBW. From
these names you can derive the info object names:
1CL_A... -> C_A...
6. Disconnect the infosource which has been created with CTBW_META from
the classification datasource.
7. Connect please the classification datasource to infosource 0PLANT
Use following info object:
info object field
0PLANT WERKS
The info object names for the characteristics are explained in step 5.
8. Add an infopackage to infosource 0PLANT for the classification
datasource.
Now the extraction of classifications of sites should work.
Best regards,
Rolf
P.S. I saw the system messed it up and doesn't display any new and empty lines. Sorry, I hope you still can read it.
Edited by: Rolf Doersam on Mar 26, 2010 6:56 PM -
How do I access websites that warn: "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...."? When I try to download any alternate browser, all I get is another warning that the alternate is "not compatible with your operating system." Is Firefox preventing this? The site listed below is a job application site. I've had this same problem with other job application sites also.
== URL of affected sites ==
https://storefront.kenexa.com/lithia/cc/Home.ssThere should be a User Agent Switcher menu item under Tools, which gives you the browser names you can impersonate.
The menu item name changes to the browser UA you are presently using.
There is also a User Agent Switcher button, you can add it using View -> Toolbars -> Customize, and dragging the button to your toolbar.
See http://chrispederick.com/work/user-agent-switcher/features/ and http://chrispederick.com/work/user-agent-switcher/help/
You can just start trying IE versions (or the versions it says on the site) until it lets you in. -
I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?
It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT -
I am unable to generate a Dunning Proposal for Promise to Pay items
Please advise how or if its even possible to generate a dunning proposal for overdue Promise to Pay items. Currently after debugging I find that the Dunning Proposal filters out any items that are from open promises. Is there a way to generate the dunning proposal for promise to pay items that are overdue? I'm using ECC 6.0 EhP 4.0 PSCD module
Within SPRO there is some config to define a dunning block for a promise to pay. I would suggest you check here.
FSCM >> Collections Management >> Int with AR >> Promise to Pay >> Make settings for Promise to Pay.
If this does not work, I would assume this is because you are using FI-CA and the config is slightly different. -
Where is the Oracle Application Server for Apex 3.2.1?
Hi, I feel ashamed asking this, but I want to know where to download the Application Server for Apex 3.2.1. Apex is installed in a DataBase 10gR1 and the O.S. where I will install the Application Server is RedHat
I think it is here
http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
But there is a lot of links and things to download and I don't even know if it will work because it is Release 3 and the DataBase is Release 1, but I tried downloading the "Oracle 10gR3 Companion (10.1.3.x) CD", but after running the installer in the disk1, I found that the Oracle HTTP Server that it would install does not include mod_plsql and I know I need it.
So, which one should I download, or where can I find it?
Thanks.Hi,
Hi, I feel ashamed asking this, but I want to know where to download the Application Server for Apex 3.2.1. Apex is installed in a DataBase 10gR1 and the O.S. where I will install the Application Server is RedHatI think it is here
http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
But there is a lot of links and things to download and I don't even know if it will work because it is Release 3 and the DataBase is Release 1, but I tried downloading the "Oracle 10gR3 Companion (10.1.3.x) CD", but after running the installer in the disk1, I found that the Oracle HTTP Server that it would install does not include mod_plsql and I know I need it.
So, which one should I download, or where can I find it?>
Strictly speaking you do not need Application Server or OHS for running Apex, you have an option in ApexListener. If it is a small installation then stick to EPG that comes built-in.
Try downloading the Oracle HTTP Server from here . You will need to check the commercial aspects yourself as OHS is not a free software for Production environment, AFAIK.
Cheers, -
JSP application developed for PC does not work on IPAQ
Hi all,
I have developed a database/web application using JSP, Apache Tomcat, MS Access. It works great on Windows PC. Now I want to make sure that it works on PDAs also.
I tried using an IPAQ which runs Win CE 3.0 but I get some errors while interacting with the database.
One of the webpages in the application has a form through which the user can submit a text message and upload a file. Following are the problems that I am facing:
1. The 'UPLOAD' button through which the user can browse his local hard drive and select a file is invisible if I am browsing with an IPAQ. I am using multipart formdata (MultipartRequest.java provided by Oreilly) for submitting a message and uploading the file. What could be the problem?
2. If I forget about the attachment file and just try to submit a text message (which works on PCs) , I get the error message: "IOEXception: submitted data is not multipart formdata".
I am very new to PDA application development, and any inputs will be very valuable.
Thanks in advance.
m_asu.I was wondering if anybody can give me some pointers as to how can I make an application developed for PCs work on IPaqs.
Thanks
m_asu -
i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??
You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.
-
Subcon PO: Can system change the qty proposed for backflush during GR?
Scenario:
We have a Subassy A (qty=1) which requires Component A (qty =8). We have component scrap maintained as 25% in the BOM.
When we create the PO with qty as shown below, the following qty is proposed for the component A (80*1.25 = 100) due to component scrap.
Subcontract PO with item cat L - Subassy A : qty = 10
Component proposed is - Component A : 100
During GR we (101) the Subaasy A: qty = 10
We backflush (543) the Component A qty =80 (system proposes qty =100 but we change it to 80.00)
In subsquent adjustment, MB04 we consume/backflush (543) the additional issued components.
Problem:
IS it possible to have the system propose the component A qty as per the BOM ie (80 for 10 Subassy A parts)
so that inventory control does not have to change the proposed qty during GR.
Thank you in advance.Hi,
You should try this.
Create an entry sheet in which planned services are defaulted from the purchase order. You can determine the quantities suggested from the PO by specifying percentages (Entry sheet -> Create -> With planned services).
Cheers ! -
Error during creation of application entity for the plug-in.
Hi Experts,
As part of creating Content Database source for SES....
We,
1 Activated the Oracle Internet Directory identity plug-in for the Oracle Content
Database instance.
2) However after activating Identity plug-in for Oracle Internet Directory.... ......... we used the csPlugin.ldif file to create an application entity for the plug-in by running the following command "$ORACLE_HOME/bin/ldapmodify -h oidHost -p OIDPortNumber -D "cn=oracle" -w password -f csPlugin.ldif" ....but in the process executing the above command.... getting the following error(we gave correct login details):
SASL/DIGEST-MD5 authentication started
ldap_sasl_interactive_bind_s: Invalid credentials (49)
How can i resolve this.
I have another query...in the command "$ORACLE_HOME/bin/ldapmodify -h oidHost -p OIDPortNumber -D "cn=oracle" -w password -f csPlugin.ldif" which user name should i specify..... is it "cn=oracle" or "cn=orcladmin"
Thanks
peter.Hi Raford,
Thanks for your reply.
We tried to create Content Database Source with the details we have...
However in this process getting an exception....
11:20:20:778 INFO main
11:20:20:784 INFO main Oracle Secure Enterprise Search, Crawler: Release 10.1.8.2
11:20:20:785 INFO main Copyright © 2006, 2007, Oracle. All rights reserved.
11:20:20:785 INFO main
11:20:20:785 INFO main ================== Crawling settings ==================
11:20:20:785 INFO main Reading configuration file from /mnt/u08/SOADEVIL/seshome/search/data/config/crawler.dat
11:20:20:785 INFO main Agent = Oracle Secure Enterprise Search
11:20:20:807 INFO main User = EQ_TEST
11:20:20:807 INFO main Database connect string = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=devilrays.appsassociates.com)(PORT=1525))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=Devilses.devilrays.appsassociates.com)))
11:20:20:807 INFO main Source type is User-defined
11:20:20:807 INFO main Source is "BJ_Cont"
11:20:20:807 INFO main Document access control policy is user-defined
11:20:20:808 INFO main Number of crawling threads = 5
11:20:20:808 INFO main Queue table = I1S8
11:20:20:808 INFO main URL table = EQ$URL
11:20:20:808 INFO main Maximum documents to crawl = no limit
11:20:20:808 INFO main Maximum depth to crawl = 2
11:20:20:808 INFO main Document size limit = 10M
11:20:20:808 INFO main Locale of the crawler message is "en_US"
11:20:20:808 INFO main URL exclusion rule = (?i:(?:\.gif)|(?:\.jpg)|(?:\.jar)|(?:\.tif)|(?:\.bmp)|(?:\.war)|(?:\.ear)|(?:\.mpg)|(?:\.wmv)|(?:\.mpeg)|(?:\.scm)|(?:\.iso)|(?:\.dmp)|(?:\.dll)|(?:\.cab)|(?:\.so)|(?:\.avi)|(?:\.wav)|(?:\.mp3)|(?:\.wma)|(?:\.bin)|(?:\.exe)|(?:\.iso)|(?:\.tar)|(?:\.png))$
11:20:20:808 INFO main URL exclusion rule = \?.*(.*\+)\1{3}
11:20:20:812 INFO main Document read timeout threshold = 30 second(s)
11:20:20:812 INFO main Crawler default character set is "8859_1"
11:20:20:812 INFO main Crawler default language is "en"
11:20:20:813 INFO main Auto language detection is on
11:20:20:813 INFO main Auto character set detection is off
11:20:20:813 INFO main Document service pipeline is "Default pipeline"
11:20:20:813 INFO main Verbose mode is on
11:20:20:935 INFO main Caching on: directory = /mnt/u08/SOADEVIL/sesdata/Devilses/cache/I1DS8/, max size = 250, action = SES_TASK
11:20:20:935 INFO main Filtering on: filter path = /mnt/u08/SOADEVIL/seshome/ctx/bin/ctxhx, number of filters = 2
11:20:20:935 INFO main MIME inclusions = text/html text/plain application/pdf application/x-msexcel application/vnd.ms-excel application/ms-excel application/x-mspowerpoint application/vnd.ms-powerpoint application/msword
11:20:20:935 INFO main URL table attributes = url, depth, signature, last_modified, status, url_id, access_url, enqueue_status, TITLE, DESCRIPTION, AUTHOR, CRAWLED_DATE, CONTENT_LENGTH, CONTENT_TYPE, LANG, CACHE_FILE_PATH, DS_ID
11:20:20:936 INFO main SQL callback statement is "begin eq_crw.crawler_callback(?,?,?,?); exception when eq_def.search_error then eq_err.raise; when others then eq_err.raise; end;"
11:20:20:936 INFO main Cookie support is enabled
11:20:20:937 INFO main Maximum number of cookies = 300
11:20:20:939 INFO main Maximum number of cookies per host = 20
11:20:20:939 INFO main Maximum size of cookie = 4096 bytes
11:20:20:940 INFO main Cache file deletion is disabled
11:20:20:940 INFO main Crawler plug-in manager class is "oracle.search.plugin.ocs.cservices.OCSCSPluginMgr"
11:20:20:940 INFO main SQL hook ID is "8"
11:20:20:940 INFO main SQL command hook statement is "begin ? := eq_crw.crawler_get_command(?,?,?,?); end;"
11:20:20:940 INFO main SQL response hook statement is "begin ? := eq_crw.crawler_send_response (?,?,?,?,?,?,?,?,?,?,?,?,?); end;"
11:20:20:940 INFO main Crawler launched by schedule "BJ_Cont"
11:20:20:940 INFO main
11:20:20:940 INFO main =================== Crawling status ===================
11:20:20:941 INFO main Crawling started at 9/18/07 11:20 AM
11:20:21:912 INFO main URL manager connecting to Oracle...
11:20:21:974 INFO main connected
11:20:22:586 INFO main Queue manager connecting to Oracle...
11:20:22:631 INFO main connected
11:20:23:497 INFO main Invoking "oracle.search.plugin.ocs.cservices.OCSCSPluginMgr"
11:20:23:501 INFO main URL manager connecting to Oracle...
11:20:23:529 INFO main connected
11:20:23:531 INFO main Initializing crawler plug-in manager "oracle.search.plugin.ocs.cservices.OCSCSPluginMgr"
11:20:23:531 ERROR main SES keystore location: null
11:20:23:532 ERROR main null oracle.search.sdk.crawler.PluginException oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:getParamValue:351 oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:init:479 oracle.search.crawler.WebCrawler:begin:1076 ImtCrawler:run:1831 ImtCrawler:main:480
11:20:23:532 ERROR main null oracle.search.sdk.crawler.PluginException oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:getParamValue:351 oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:init:479 oracle.search.crawler.WebCrawler:begin:1076 ImtCrawler:run:1831 ImtCrawler:main:480
11:20:23:676 INFO Thread-1 Remote command "reportstatistics" received, argument = "quit"
11:20:23:676 INFO Thread-1 Executing remote command "reportstatistics"
11:20:23:697 INFO Thread-1 Send back remote command execution result
11:20:25:944 INFO main Shutting down all crawling threads...
11:20:25:948 INFO main
11:20:25:949 INFO main =================== Crawling results ===================
11:20:25:949 INFO main Crawling started at 9/18/07 11:20 AM
11:20:25:949 INFO main Crawling stopped at 9/18/07 11:20 AM
11:20:25:949 INFO main Total crawling time = 0:0:5
11:20:25:949 INFO main
11:20:25:954 INFO main Total number of documents fetched = 0
11:20:25:954 INFO main Document fetch failures = 0
11:20:25:954 INFO main Document conversion failures = 0
11:20:25:954 INFO main Total number of unique documents indexed = 0
11:20:25:954 INFO main Total data collected = 0 bytes
11:20:25:954 INFO main Total number of non-indexable documents = 0
11:20:25:955 INFO main
11:20:25:955 INFO main Number of times disk cache is full = 0
We have followed the installation details provided in "SESAdmiistratorGuide".
In that guide.... during creation of Content Database source he did not mention any entry for "SES keystore location", and the exception which we are getting is related to "SES keystore location: null" (please look into the exception stack).
could you please guide us.
Thanks
peter. -
How can I know the delta field for CO-PA datasource?
Hi,folks:
How can I know which is the field assigned as the delta field for CO-PA datasource,as is noticed in the note that after PI2004 the logic has been turned to general datasource,but I can't find the datasource through RSO2.
Full points will be given to u.
Martin XieDear Martin,
The CO-PA DataSources generated use a separate time stamp method for the delta procedure. This procedure means that client-independent DataSources in CO-PA are normally restricted to the clients in which they were generated.
See this link...
http://help.sap.com/saphelp_erp2005vp/helpdata/en/97/6f4d40cef71059e10000000a155106/frameset.htm
Also check ROOSOURCE in R3, asmentioned by Dinesh.
Hope it helps. -
The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?
Thanks a lot for the response. Yes, I am checking my C: drive data thoroughly now, including the hidden folders, to ascertain if something else can be moved, as per your suggestion.
-
Best practice for application module for scalability
if i compare application module with forms 6i runtime session.(correct me if i wrong)
In forms 6i, we create for single form for purchase entry. in which we select table like po , po_item, item_master, customer master
also single form for sales entry. in which we select table like sales , sales_item, item_master, customer master, po , po_item
So my question is. in jdeveloper , we planning to make separate jsp page and applicaiton module for purchase entry,
separare jsp page and application module for sales.
is it ok.
or
what is the best practice in this senario.?? ( or in scalability senario)
if i made one single application module for whole application (let say 300 entity's(tables)) will performance of my app server degrade.You might want to read the chapter about AM Granularity in the ADF Developer Guide:
http://download.oracle.com/docs/html/B25947_01/bcservices009.htm#sm0229
Maybe you are looking for
-
Error when collect process-chain
hi all, When I collect the process-chain to transport in the transport-connection,an error occured in the below windows: Object 'ATTRIBCHANEVEN_485MDFX3NYUF8PKGN9RSFATRD' (RSPV) of type 'Process Variants' is not available in version 'A'. Could anybod
-
How do I recover data lost from restoring
I restored my ipod touch to the settings of a former ipod touch without realizing it would delete all my data. It erased some pictures and video, so I am wondering if there is any way to recover that lost data. Help!
-
Oracle 9i install error in writing to temp file
Could someone please help? I'm trying to install the Oracle 9i client (v.9.2) on windows xp, but getting this error: "Error in writing to directory C:\DOCUME~1\user\LOCALS~1\Temp\OraInstall2005-09-15-xxxxxxx". Please ensure that this directory is wri
-
Transformation of 2D image to 3D
Hi all, I am new to Java3D. I am desperately needing help to complete my work of converting a single 2D image to 3D using Java. What API should I use, or is there some way to do it using JAI API. Please help me. Awaiting your valuable reply. Thanks,
-
Need best practice: one application or many?
We have a database and are going to build GUI using ApEx The question is: should we create many applications - one for every task (or group of tasks / user roles) or create one large application (hundreds of pages) Why?